(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

  • Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

Straight Ejectr Sleeve M2 / Wall thickness 0.3mm / Taper type

Straight Ejectr Sleeve  M2 / Wall thickness 0.3mm / Taper type

Move the mouse over the image to zoom

This is an ejector sleeve that can be set to a thin wall with a minimum wall thickness of 0.3 mm at the tip. It has a tapered shape from the sliding part to the escape hole. In addition, the coaxiality is 0.003/0.005, making it a more accurate product than usual.

Part Number

Configured Part Number is shown.

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
ESVXN3-[20-110/0.01]-P[2.5-3/0.01]-V[1-2.4/0.01]-C[1.2-2.6/0.01]-S[2-7/1]
ESVXN4-[20-110/0.01]-P[3.01-4/0.01]-V[1-3.4/0.01]-C[1.2-3.6/0.01]-S[2-10/1]
ESVXN5-[20-110/0.01]-P[4.01-5/0.01]-V[1-4.4/0.01]-C[1.2-4.6/0.01]-S[2-13/1]
ESVXN6-[20-110/0.01]-P[5.01-6/0.01]-V[1-5.4/0.01]-C[1.2-5.6/0.01]-S[2-16/1]
ESVXN7-[20-110/0.01]-P[6.01-7/0.01]-V[1-6.4/0.01]-C[1.2-6.6/0.01]-S[2-19/1]
ESVXN8-[20-110/0.01]-P[7.01-8/0.01]-V[1-7.4/0.01]-C[1.2-7.6/0.01]-S[2-22/1]
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipNo. (Nominal diameter)
(mm)

-

1 Piece(s) 5 Day(s) or more 3

-

1 Piece(s) 5 Day(s) or more 4

-

1 Piece(s) 5 Day(s) or more 5

-

1 Piece(s) 5 Day(s) or more 6

-

1 Piece(s) 5 Day(s) or more 7

-

1 Piece(s) 5 Day(s) or more 8
Part Number
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipNo. (Nominal diameter)
(mm)

Loading...

  1. 1

Basic Information

Product composition Single sleeve Material SKH51 Surface treatment No
Head thickness 4mm(T4) Shaft diameter tolerance 0/-0.005 Concentricity between the hole and shaft diameters ◎0.005
Boring method Grinding Inner dia. tolerance +0.005/0 Tapered or not Yes
Center pin tip shape No

Similar Product

  • Brand
    From
    Days to ship
  • Current product

    MISUMI

    --

    5 Day(s) or more

back next

Tech Support

Mold
Tel:(65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)

Not a MISUMI customer yet? Register & enjoy 50% off your order!* (*T&C apply.)

We also deliver to:Philippines, Australia, New Zealand, Middle East region!