(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (SGT) 25/11/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
3030, Slot Width 8mm Aluminum Frames
Standard LCF8-3030 and Heavy Duty LCFW8-3030 are RoHS compliant.
Part Number
Configured Part Number is shown.
Suitable for the structure of small hoods, cabinets, and display bars.
E-series profile products are different from MISUMI existing profiles in section shapes, so they can only be used with E-series special accessories starting with L.
| Type | Profile Type |  Material |  Surface Treatment |
| LCF8 | Standard | 6063－T5 | Clear Anodize |
| LCFB8 | Black | Baked Paint (Black) | |
| LCFS8 | Sand Blast | Sand Blast Anodize | |
| LCFW8 | Heavy | Clear Anodize | |
| LCFL8 | Light | Clear Anodize | |
| LCFLY8 | ellow | Baked Paint (Yellow) | |
| LCFT8 | 2-Side slot | Clear Anodize | |
| LCFF8 | 3-Side slot | Clear Anodize | |
| LCFR8 | Curved | Clear Anodize |
| Part Number |  Overall Length L | Profile Type | Mass Weight kg/m | Cross Sectional Moment of innertia | Recommend bracket and accessories 1 | Recommend bracket and accessories 2 | ||||||
 Type |  Profile | ℓx(cm4) | ℓy(cm4) | Standard Bracket | Bolt | Nut | Heavy load bracket | Bolt for Heavy Bracket | Nut | |||
| LCF8** | 3030 | 50 ~ 2000 (6000)* | Standard | 0.83 | 2.86 | 2.85 | LBSBL8-3030 | E-GSCB6-12 | LNHRN8-30-6 | LBL5050-30 | E-GSCB8-15 | LNHRN8-30-8 |
| LCFB8 | 50 ~ 2000 (2500) | Black | 0.87 | |||||||||
| LCFS8 | Sand Blast | |||||||||||
| LCFW8 | Heavy | 0.88 | 3.35 | 3.35 | ||||||||
| LCFL8** | 50 ~ 2000 (6000)* | Lightweight | 0.66 | 1.67 | 1.67 | |||||||
| LCFLY8 | 50 ~ 2000 (2500) | Yellow | ||||||||||
| LCFT8 | 2-Side slot | 0.98 | 2.98 | 2.98 | ||||||||
| LCFF8 | 3-Side slot | 0.95 | 2.91 | 3.12 | ||||||||
| LCFR8 | Curved | 0.92 | 2.52 | 2.52 | ||||||||
Maximum selectable length can be checked on configure bar on the left.As it is a low cost and Economy series product, there may be small scars and defects on the surface. If you have higher requirements for the surface and end face, please select well.* 6000mm is availalble for sales in MISUMI Vietnam only.
** For Vietnam market, please check and order in this page.
| Alteration | Symbol | Specification | Machining content |
End Tapping (To Center Hole) Directory Link Size Infomation | LTP/RTP/TPW |  | Machining Tapped Holes on End Faces of aluminum frame
|
| 45-Degree Cutting Directory Link Size Information | L□T45/R□T45 |  | Cutting with 45-degree angle |
| Drilling Wrench Hole Directory Link Size Information | LWP/RWP |  | Drilling Wrench holes in fxed positions for Blind joint connections. Parts used for this additional processing： Button Head ScrewsJoint Screw Plates |
| Counterboring at Specified Position Directory Link Size Information | Z8/XA |  | Machining Counterbored holes at any specified positions. Parts used for this additional processing： Button Head Screws |
| S Hole Blind Joint Dedicated Holes Directory Link Size Information | LSH/RSH |  | Adding required holes for Pre-Assembly. Insertion Double Joint connections. Parts used for this additional processing： Blind Joints, Pre-Assembly Insertion Double Joint Kits |
| M Hole Blind Joint Dedicated Holes Directory Link Size Information | LMH/RMH |  | Adding required holes for Post- Assembly Insertion Double Joints,Center Joint connections. Parts used for this additional processing： Blind Joints, Pre-Assembly Insertion Center Joint Kits |
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
| Part Number |
|---|
| LCF8-3030-300 |
| LCF8-3030-[50-299/1] |
| LCF8-3030-[301-4000/1] |
| LCFB8-3030-[50-2800/0.5] |
| LCFF8-3030-[50-2800/0.5] |
| LCFL8-3030-[50-2800/0.5] |
| LCFLY8-3030-[50-2800/0.5] |
| LCFS8-3030-[50-2800/0.5] |
| LCFT8-3030-[50-2800/0.5] |
| LCFW8-3030-300 |
| LCFW8-3030-[50-299/1] |
| LCFW8-3030-[301-4000/1] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Extrusion Type | Surface Treatment | Number of Slotted Surfaces | Extrusion Type | Overall Length L (mm) | Weight (kg/m) | Wall Thickness (t) (mm) | Feature |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 3 Day(s) | 10 | Square Shape | Clear Anodize | Four-Side Slots | Standard | - | 0.805 | 2 | - | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Square Shape | Clear Anodize | Four-Side Slots | Standard | 50 ～ 299 | 0.805 | 2 | - | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Square Shape | Clear Anodize | Four-Side Slots | Standard | 301 ～ 4000 | 0.805 | 2 | - | ||
- | 1 Piece(s) | 7 Day(s) | - | Square Shape | Black Anodize | Four-Side Slots | Black | 50 ～ 2800 | 0.87 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | - | Square Shape | Clear Anodize | Three-Side Slots | 3 Slots | 50 ～ 2800 | 1.04 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | - | Square Shape | Clear Anodize | Four-Side Slots | Light | 50 ～ 2800 | 0.641 | - | - | ||
- | 1 Piece(s) | 6 Day(s) | - | Square Shape | [Baked Finish (Yellow)] Baked Yellow Paint | Four-Side Slots | Yellow | 50 ～ 2800 | 0.63 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | - | Square Shape | Clear Anodize | Four-Side Slots | Sand blast | 50 ～ 2800 | 0.87 | - | Sand Blast Finished | ||
- | 1 Piece(s) | 7 Day(s) | - | Square Shape | Clear Anodize | Two-Side Slots | 2 Slots | 50 ～ 2800 | 0.98 | - | - | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Square Shape | Clear Anodize | Four-Side Slots | Heavy Duty | - | 0.88 | - | - | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Square Shape | Clear Anodize | Four-Side Slots | Heavy Duty | 50 ～ 299 | 0.88 | - | - | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Square Shape | Clear Anodize | Four-Side Slots | Heavy Duty | 301 ～ 4000 | 0.88 | - | - |
Loading...
Basic Information
| Standard Extrusion Size(mm) | 30 | Extrusion Series | MISUMI Economy Series LCF 30/40/50/60 (Slot Width 8 mm) | Surface Milled | Not Provided |
|---|---|---|---|---|---|
| Material | 6063-T5 | L Dimension Fixed, Specified | Specified |
Specification/Dimensions
-
Surface Treatment
- Clear Anodize
- Black Anodize
- Baked Finish (Yellow)
-
Number of Slotted Surfaces
-
Four-Side Slots -
Three-Side Slots -
Two-Side Slots
-
-
Extrusion Type
- 2 Slots
- 3 Slots
- Black
- Heavy Duty
- Light
- R Shape(Curved)
- Sand blast
- Standard
- Yellow
-
Overall Length L(mm)
-
type
- LCF8-3030
- LCFB8-3030
- LCFF8-3030
- LCFL8-3030
- LCFLY8-3030
- LCFR8-3030
- LCFS8-3030
- LCFT8-3030
- LCFW8-3030
-
Extrusion Type
-
Square Shape -
R Shape
-
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 3 Day(s) or Less
- 6 Day(s) or Less
- 7 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently asked question (FAQ)
- Question: Can aluminum alloy profiles be cut to a specified length? What is the cutting precision?
- Answer: Any length between 50 and 6000(mm) can be specified (Can be specified down to 0.5mm increments) for cutting, and the cutting tolerance is within ±0.5mm.
- Question: What is the difference between the pre-mounted nut and post-mounted nut?
- Answer: To install the nut first, you need to install it from the end of the profile first, and then fix it with an external screw. The post-mounted nut can be placed in the profile groove from the groove surface and fixed in conjunction with other accessories. Suitable for use when adding accessories to the profile.
Tech Support
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?