(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

  • Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 15/12/2024 to 6:00 (SGT) 16/12/2024. We apologize for the inconvenience.
  • Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

Timing Belts H (C-TBN495H200)

Timing Belts H C-TBN495H200
  • Volume Discount

Economy series products, please order more than 4 pcs.



Economy H-Type Timing Belt

Quiet OperationCustomizableChloroprene Material

- With a wide range of belt lengths and widths, you can tailor the belt to perfectly match your specific equipment needs.

- Constructed with high-quality chloroprene rubber, these belts excel in resisting abrasion, oil, and grease, ensuring extended service life even in demanding environments.

- The glass fiber reinforced core provides exceptional strength and tensile strength, preventing belt elongation and slippage, resulting in consistent power transmission.

- The accurately designed trapezoidal tooth profile guarantees smooth and efficient power transmission, minimizing noise and vibration for optimal performance.

- Engineered to function reliably in temperatures ranging from -30°C to 90°C, these belts offer versatility across various operating conditions.

Economy H-Type Timing Belt
MISUMI Economy Logo

MISUMI Standard
MISUMI Standard

Cheaper Price
Cheaper Price

Product Variety
Product Variety

3D CAD
3D CAD Support


Product Overview

Usually, timing pulleys and timing belt are widely used to design mechanisms for transmitting rotational power generated by motors.
Driving and transmission are realized through the engagement between the teeth of timing pulleys and timing belts.
Local production in China delivers MISUMI quality at low price.

Dimensional Drawing

MISUMI Complete specifications Factory direct sales Original quality

■ Material/Specification Table
timing belt Material
① Tooth surface protection layerNylon canvas
② Tooth rubberChloroprene
③ Core wireGlass Fiber
Specifications Overview
TypesTooth pitchLrhHRrRaUnit weight
g/m (Width: 10mm)
H12.740°6.122.294.31140
timing beltPlease note that the meaning of the timing belt number of toothed timing belt varies with type.
 The belt circumference length of H (inch size) is the belt number.
timing beltTiming belt circumference length is core wire length.
timing beltC-TBN timing belt operating temperature range: -30 to 90 ℃.
timing beltThe model engraved on the back of the product is the manufacturer model.
timing beltMISUMI makes no commitment to this product brand.
timing beltFor the transmission capacity and calculation and design method of economy series timing belt, please refer to the national standard (GB) design manual.
 
Specification Table
■ Specification Table
Please order after selecting part number and parameters according to the selection steps to .
Ordering Example Part Number (TypeBelt Number Nominal Belt Width)
 C-TBN515H075

■ C-TBN
Tooth profile H (Pitch: 12.7mm)
Part NumberBelt
Nominal Width
Number of TeethBelt Circumference Length
(mm)
TypeBelt Number
C-TBN60H75
(19.1mm)


100
(25.4mm)


150
(38.1mm)


200
(50.8mm)
12152.40
120H24304.80
145H29368.30
170H34431.80
185H37469.90
200H40508.00
205H41520.70
210H42533.40
220H44558.80
225H45571.50
230H46584.20
235H47596.90
240H48609.60
245H49622.30
250H50635.00
255H51647.70
260H52660.40
270H54685.80
275H55698.50
280H56711.20
285H57723.90
290H58736.60
300H60762.00
305H61774.70
310H62787.40
315H63800.10
320H64812.80
325H65825.50
330H66838.20
335H67850.90
340H68863.60
345H69876.30
350H70889.00
355H71901.70
360H72914.40
365H73927.10
370H74939.80
375H75952.50
380H76965.20
385H77977.90
390H78990.60
395H791003.30
400H801016.00
405H811028.70
410H821041.40
415H831054.10
420H841066.80
425H851079.50
430H861092.20
435H871104.90
440H881117.60
445H891130.30
450H901143.00
460H921168.40
465H931181.10
470H941193.80
475H951206.50
480H961219.20
485H971231.90
490H981244.60
495H991257.30
500H1001270.00
510H1021295.40
515H1031308.10
520H1041320.80
525H1051333.50
530H1061346.20
540H1081371.60
545H1091384.30
550H1101397.00
555H1111409.70
560H1121422.40
565H1131435.10
570H1141447.80
580H1161473.20
585H1171485.90
590H1181498.60
600H1201524.00
605H1211536.70
610H1221549.40
615H1231562.10
620H1241574.80
625H1251587.50
630H1261600.20
640H1281625.60
645H1291638.30
650H1301651.00
660H1321676.40
670H1341701.80
680H1361727.20
690H1381752.60
700H1401778.00
710H1421803.40
720H1441828.80
725H1451841.50
730H1461854.20
740H1481879.60
750H1501905.00
760H1521930.40
770H1541955.80
780H1561981.20
785H1571993.90
790H1582006.60
800H1602032.00
810H1622057.40
820H1642082.80
830H1662108.20
840H1682133.60
850H1702159.00
860H1722184.40
870H1742209.80
880H1762235.20
900H1802286.00
910H1822311.40
920H1842336.80
930H1862362.20
940H1882387.60
950H1902413.00
960H1922438.40
980H1962489.20
985H1972501.90
1000H2002540.00
1020H2042590.80
1050H2102667.00
1070H2142717.80
1080H2162743.20
1100H2202794.00
1120H2242844.80
1130H2262870.20
1135H2272882.90
1140H2282895.60
1150H2302921.00
1160H2322946.40
1180H2362997.20
1200H2403048.00
1240H2483149.60
1250H2503175.00
1260H2523200.40
1270H2543225.80
1285H2573263.90
1300H2603302.00
1325H2653365.50
1350H2703429.00
1360H2723454.40
1400H2803556.00
1440H2883657.60
1450H2903683.00
1460H2923708.40
1500H3003810.00
1510H3023835.40
1550H3103937.00
1560H3123962.40
1600H3204064.00
1630H3264140.20
1650H3304191.00
1680H3364267.20
1700H3404318.00
1750H3504445.00
1780H3564521.20
1800H3604572.00
1850H3704699.00
1900H3804826.00
1950H3904953.00
2100H4205334.00

Product Features

S type circular tooth profile economy series timing belt is made of rubber, featuring deviation prevention and wear resistance■ S type circular tooth profile rubber timing belt (S2M/S3M/S5M/S8M/S14M)
Feature 1: Reasonable semi-circular arc tooth profile design can provide higher torque to adapt to high load transmission.
Feature 2: timing belt Reduce the noise generated by high-speed operation.
Feature 3: Tooth peak changes under force, ensuring a longer life than conventional circular tooth profile teeth.
Feature 4: Have certain conductivity
Feature 5: Operating Temperature Range: -30 to 90℃.
Features of P type domestic high-accuracy circular tooth profile timing belt■ P type circular tooth profile rubber timing belt (P5M/P8M)
Feature 1: Reasonable semi-circular arc tooth profile design can provide higher torque to adapt to high load transmission.
Feature 2: Special concave tooth peak design, better reducing noise generated by high-speed operation.
Feature 3: Tooth peak changes under force, ensuring greater accuracy than conventional circular tooth profile teeth.
Feature 4: Have certain conductivity
Feature 5: timing belt Operating Temperature Range: -25 to 80℃.
MXL, XL, L, H trapezoidal tooth profile timing belts are suitable for light load transmission and driving■ Trapezoidal tooth profile rubber timing belt (MXL/XL/H/T5/T10)
Feature 1: Suitable for light load transmission, standard torque driving.
Feature 2: Tooth rubber uses chloroprene to protect core wire, providing excellent bending fatigue resistance, heat resistance, oil resistance
Feature 3: Ideal choice of economical and maintenance-free alternative to traditional transmission method.
Feature 4: Have certain conductivity
Feature 5: timing belt Operating Temperature Range: -30 to 90℃ (MXL/XL/L/H), 0 to 80℃ (T5/T10)

Example of Use

Usage Method Example DrawingInstructions for use of timing wheel and timing belt
The TIMING BELT is installed on the motor and the rotating shaft to transmit the rotational force① Driving (The driven wheel is driven by the driving wheel for transmission)
Transmission belt, used for repeated motion with the object not rotating and high requirements on positioning accuracy② Transmission (Used for repeated motion with the object not rotating and high requirements on positioning accuracy)
Usage Method Example DrawingInstructions for use of timing wheel and timing belt
Plates are conveyed by two timing toothed belts③ Conveyance (Plates are conveyed by two timing toothed belts)
Usage method and example for conveyor belt lifting, repeated positioning motion④ Traction transmission (Workpieces are clamped and transmitted by the belt)

Usage Method

■ Installation method for timing belt transmission
Turn off the power supply, remove the protective cover, loosen the motor assembly bolts, move the motor so that the belt is loose enough. The timing belt can be removed without prying. Never try to pry the belt down.
Remove the old belt and check for abnormal wear. Excessive wear may mean that there are problems in the design or maintenance of the transmission device.
Choose the right timing belt to replace.
To clean the timing belt and pulley, wipe with a cloth dipped in a small amount of non-volatile liquid. Soaking in detergent or scrubbing the belt with detergent is not advisable. To remove grease, it is also undesirable to wipe with sandpaper or scratch with a sharp object. The belt must be kept dry before installation and use.
Check the pulley for abnormal wear or cracks. If the wear is excessive, the pulley must be replaced.
Check whether the pulley is linearly symmetrical. Linear symmetry of the pulley is essential for the operation of the timing belt, especially the timing belt transmission device.
Asymmetry of the pulley is shown as follows:
 Usage method Installation guide Complete selection Fit installation
Check the remaining transmission device components, such as bearings and bushings, for symmetry, durability, lubrication and other conditions.
Install a new timing belt on the pulley. Never pry or use too much force.
Tighten to narrow the center distance of the transmission device until the tension tester detects that the timing belt tension is appropriate. Turn the driving wheel several times with your hands. Re-test tension.
Tighten the assembly timing belt of the motor and correct the torque. Since any change in the center distance of the transmission device during operation will result in poor belt performance, it is important to ensure that all transmission components have been tightened.
Start the device and observe the timing belt performance to see if there is abnormal vibration, and listen carefully if there is abnormal noise. It is best to turn off the machine and check the conditions of the bearing and motor.

Precautions

① Do not bend the timing belt by force.
It is strictly forbidden to bend the belt, which easily causes breakage
② Do not use in direct contact with water, solvent, oil, acid, alkali, UV, ozone, etc.
Do not directly contact water in operating environmentDo not use in acidic environmentsAvoid contact with alkaline solventsTry not to touch oil liquidsAvoid exposure to strong UV rays
③ Please timing belt avoid using or keeping at extreme high or low temperatures beyond the operating temperature range, or in humid environments.
④ During installation and maintenance, be sure to cut off the power supply and confirm that the machine is completely stopped before proceeding.
⑤ When there may be impurities, be sure to set the guard.

Application Industries

Food Semiconductor Smart phone
It is widely used in food transport and transfer Industry Application Industry Semiconductor Smartphone 3C IPHONE Huawei
Automotive Electronic & Electrical Appliances Medical
Application in automotive assembly production line Method of usage in electronic & electrical and home appliances industry Widely used in medical equipment, blood machines and other related equipment in the biomedical industry

Related Products

High Torque Timing Belt Pulleys S2M Type Flat Timing Belt For General Use Economy Series Toothed Timing Belt
S2M S3M S5M S8M S14M Type
TIMING PULLY High torque timing pulley MISUMI brand Pulley manufacturer S2M FLATBELT Flat belt Conveyor belt Transportation belt MISUMI brand Economy series Domestic S type tooth profile timing belt Low price Short delivery time
Reference timing belt model: HTPA48S2M040-B-N10 Reference timing belt model: HBLT350-4.23 Reference timing belt model: C-HTBN400S2M-40
Reason for recommendation: high transmission power, short delivery time, multiple types Reason for recommendation: intended use for transmission, rich variety of specifications and types Reason for recommendation: rich variety of specifications, high cost performance

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
C-TBN495H200
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSBelt Width (mm)
(mm)
Belt Norminal Width (Inch)
(Inch)
Circumference Length
(mm)
Number of Teeth

SGD 22.88

4 Piece(s)Available 9 Day(s) 1050.821257.3099

Loading...

  1. 1

Basic Information

Belt Type H Belt Shape Closed End Belt Material Rubber Belt
Belt Tooth Surface Standard (Single Sided) Core Wire Material Glass Fiber Belt Shape Type Trapezoidal Tooth Profile Circular Type
Transmission Torque Regular Torque Transmission

Please check the type/dimensions/specifications of the part C-TBN495H200 in the Timing Belts H series.

Frequently asked question (FAQ)

Question: Why is the order model of the timing belt inconsistent with the actual belt label and engraving?
Answer: Order model is MISUMI product model, the label on the belt or printed model on the belt surface is the belt manufacturer model, which varies with manufacturer, but there will be no influence on the product itself.
Question: The timing belt has been broken after use for a very short period of time. Is there a problem with the quality of the belt?
Answer: The timing belt is a standard product, and the same batch of products have very few individual quality problems, please refer to P.2875【Main causes of premature breakage and corresponding countermeasures】to troubleshoot the equipment in use.
Question: Can alteration be made to the timing belt?
Answer: Alteration cannot be made to the circumference of the timing belt, and partial alteration can be made to the width.
Question: What kind of belt is better to use under conditions that require high cleanliness?
Answer: The use of urethane belts is recommended, which has significantly improved dust drop, compared to the rubber belt.
Question: What are the two main types of timing belts according to their functions? What is the role?
Answer: Timing belts are mainly divided into transmission type and driving type. For transmission type, the load can be placed on the timing belt surface for transmission. For driving type, no load is carried, and only the role of transmitting torque is played, which is similar to the role of chain.
Question: How to judge or measure whether the belt tension meets the installation requirements?
Answer: It is recommended that the customer purchase the tension meter by himself and make a judgment according to the calculation formula of the initial design.
Question: Which tooth type of the timing belt has the smallest clearance? What will it affect?
Answer: The arc tooth type has minimum clearance, which can improve such indicators as positioning accuracy and rigidity.

Check other FAQ (4 items) Hide

Similar Part Numbers

Part Number
C-TBN1000H200
C-TBN1020H075
C-TBN1020H100
C-TBN500H075
C-TBN500H100
C-TBN500H150
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSBelt Width (mm)
(mm)
Belt Norminal Width (Inch)
(Inch)
Circumference Length
(mm)
Number of Teeth

SGD 46.06

4 Piece(s)Available 9 Day(s) 1050.822540200

SGD 12.84

4 Piece(s)Available 9 Day(s) 1019.10.752590.8204

SGD 17.02

4 Piece(s)Available 9 Day(s) 1025.412590.8204

SGD 8.79

4 Piece(s)Available 9 Day(s) 1019.10.751270100

SGD 11.64

4 Piece(s)Available 9 Day(s) 1025.411270100

SGD 17.38

4 Piece(s)Available 9 Day(s) 1038.11.51270100

Tech Support