(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

  • Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 15/12/2024 to 6:00 (SGT) 16/12/2024. We apologize for the inconvenience.
  • Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

Timing Belts T5 (C-TTBN1380T5-100)

Timing Belts T5 C-TTBN1380T5-100
  • Volume Discount

Timing Belts T5
It is a trapezoidal tooth profile timing belt. This belt always uses for regular torque transmission in an automation machine
[Features]
• Belt Shape: Closed End
• Belt Tooth Type: T5 (trapezoidal tooth profile)
• Tooth Pitch: 5 mm.
• Belt Width: 10, 15, 20, 25 and 50 mm.
• Circumference Length Shortest/Longest: 185 mm. and 1630 mm.
• Belt Operating Temperature Range: 0 to 80℃.
• Material:
Tooth rubber: Chloroprene
Core wire: Glass Fiber
[Applications]
Suitable for use with a timing pulley in a transmission system in an automation machine



Economy T5 Timing Belt

Quiet OperationWidth OptionsChloroprene Material

- With a wide range of belt widths and lengths, you can select the perfect belt for your specific equipment needs.

- The glass fiber reinforced core provides exceptional strength and tensile strength, preventing belt elongation and slippage, resulting in consistent power transmission.

- The accurately designed trapezoidal tooth profile guarantees smooth and efficient power transmission, minimizing noise and vibration for optimal performance.

- Engineered to function reliably in temperatures ranging from 0°C to 80°C, these belts offer versatility across various operating conditions.

- The smooth tooth profile contributes to minimal noise generation, creating a quieter working environment.

Economy T5 Timing Belt
MISUMI Economy Logo

MISUMI Standard
MISUMI Standard

Cheaper Price
Cheaper Price

Product Variety
Product Variety

3D CAD
3D CAD Support


Product Overview

Usually, timing pulleys and timing belt are widely used to design mechanisms for transmitting rotational power generated by motors.
Driving and transmission are realized through the engagement between the teeth of timing pulleys and timing belts.

Dimensional Drawing

Dimensional Drawing of MISUMI Economic Type Toothed Timing Belt

■ Material/Specification Table
  Material
①BodyChloroprene
②Core WireGlass Fiber

Specifications Overview

TypesTooth pitchHhLUnit weight g/m
(Width: 10mm)
T552.21.21.820
Operating Temperature 0 to 80℃
Belt circumference length is core wire length
MISUMI makes no commitment to this product brand
The model number on the back of the product is the supplier model.
For the transmission capacity and design method of economy series timing belt, please refer to the national standard (GB) design manual.

Specification Table

■ Specification Table
Ordering Example of MISUMI (Economic Type) Toothed Timing Belt
 
TypesTooth pitchHhLUnit weight g/m
(Width: 10mm)
T552.21.21.820

■ Type T5 (Tooth pitch: 5mm)
Part NumberBelt
Nominal Width
Number of TeethBelt Circumference Length
(mm)
TypeBelt Number
C-TTBN150T5100
(10mm)


150
(15mm)


200
(20mm)


250
(25mm)
30150
160T532160
165T533165
185T537185
190T538190
200T540200
205T541205
210T542210
215T543215
220T544220
225T545225
240T548240
245T549245
250T550250
255T551255
260T552260
270T554270
275T555275
280T556280
290T558290
295T559295
300T560300
305T561305
310T562310
320T564320
325T565325
330T566330
335T567335
340T568340
350T570350
355T571355
360T572360
365T573365
370T574370
375T575375
390T578390
395T579395
400T580400
410T582410
420T584420
425T585425
435T587435
440T588440
445T589445
450T590450
455T591455
460T592460
470T594470
475T595475
480T596480
490T598490
500T5100500
510T5102510
525T5105525
530T5106530
545T5109545
550T5110550
560T5112560
565T5113565
575T5115575
590T5118590
600T5120600
605T5121605
610T5122610
620T5124620
625T5125625
630T5126630
635T5127635
650T5130650
660T5132660
675T5135675
690T5138690
700T5140700
710T5142710
720T5144720
725T5145725
740T5148740
750T5150750
780T5156780
785T5157785
800T5160800
810T5162810
815T5163815
840T5168840
850T5170850
860T5172860
880T5176880
900T5180900
910T5182910
930T5186930
940T5188940
990T5198990
1000T52001000
1020T52041020
1075T52151075
1100T52201100
1140T52281140
1200T52401200
1210T52421210
1215T52431215
1350T52701350
1380T52761380
1500T53001500
1550T53101550
1630T53261630
1800T53601800

Product Feature

S type circular tooth profile economic type timing belt is made of rubber, featuring deviation prevention and wear resistance ■ S type circular tooth profile rubber timing belt (S2M/S3M/S5M/S8M/S14M)
Feature 1: Reasonable semi-circular arc tooth profile design can provide higher torque to adapt to high load transmission.
Feature 2: Reduce the noise generated by high-speed operation.
Feature 3: Tooth peak changes under force, ensuring a longer life than conventional circular tooth profile teeth.
Feature 4: Have certain conductivity
Feature 5: Operating Temperature Range: -30 to 90℃.
Features of P type domestic high-accuracy circular tooth profile timing belt ■ P type circular tooth profile rubber timing belt (P5M/P8M)
Feature 1: Reasonable semi-circular arc tooth profile design can provide higher torque to adapt to high load transmission.
Feature 2: Special concave tooth peak design, better reducing noise generated by high-speed operation.
Feature 3: Tooth peak changes under force, ensuring greater accuracy than conventional circular tooth profile teeth.
Feature 4: Have certain conductivity
Feature 5: Operating Temperature Range: -25 to 80℃.
Trapezoidal tooth profile timing belt is suitable for light load transmission and driving ■ Trapezoidal tooth profile rubber timing belt (MXL/XL/H/T5/T10)
Feature 1: Suitable for light load transmission, standard torque driving.
Feature 2: Tooth rubber uses chloroprene to protect core wire, providing excellent bending fatigue resistance, heat resistance, oil resistance
Feature 3: Ideal choice of economical and maintenance-free alternative to traditional transmission method.
Feature 4: Have certain conductivity
Feature 5: Operating Temperature Range: -30 to 90℃ (MXL/XL/H) , 0 to 80℃ (T5/T10)

Example of Use

Usage Method Example DrawingInstructions for use of timing wheel and timing belt
The TIMING BELT is installed on the motor and the rotating shaft to transmit the rotational force① Driving (The driven wheel is driven by the driving wheel for transmission)
Transmission belt, used for repeated motion with the object not rotating and high requirements on positioning accuracy② Transmission (Used for repeated motion with the object not rotating and high requirements on positioning accuracy)
Usage Method Example DrawingInstructions for use of timing wheel and timing belt
Plates are conveyed by two timing toothed belts③ Conveyance (Plates are conveyed by two timing toothed belts)
Usage method and example for conveyor belt lifting, repeated positioning motion④ Traction transmission (Workpieces are clamped and transmitted by the belt)

Usage Method

■ Installation method for timing belt transmission
Turn off the power supply, remove the protective cover, loosen the motor assembly bolts, move the motor so that the belt is loose enough. The belt can be removed without prying. Never try to pry the belt down.
Remove the old belt and check for abnormal wear. Excessive wear may mean that there are problems in the design or maintenance of the transmission device.
Choose the right belt to replace.
To clean the belt and pulley, wipe with a cloth dipped in a small amount of non-volatile liquid. Soaking in detergent or scrubbing the belt with detergent is not advisable. To remove grease, it is also undesirable to wipe with sandpaper or scratch with a sharp object. The belt must be kept dry before installation and use.
Check the pulley for abnormal wear or cracks. If the wear is excessive, the pulley must be replaced.
Check whether the pulley is linearly symmetrical. Linear symmetry of the pulley is essential for the operation of the timing belt, especially the timing belt transmission device.
Asymmetry of the pulley is shown as follows:
 Usage method Installation guide Complete selection Fit installation
Check the remaining transmission device components, such as bearings and bushings, for symmetry, durability, lubrication and other conditions.
Install a new belt on the pulley. Never pry or use too much force.
Tighten to narrow the center distance of the transmission device until the tension tester detects that the belt tension is appropriate. Turn the driving wheel several times with your hands. Re-test tension.
Tighten the assembly bolts of the motor and correct the torque. Since any change in the center distance of the transmission device during operation will result in poor belt performance, it is important to ensure that all transmission components have been tightened.
Start the device and observe the belt performance to see if there is abnormal vibration, and listen carefully if there is abnormal noise. It is best to turn off the machine and check the conditions of the bearing and motor. If it feels too hot to the touch, the belt may be too tight, the bearing may be asymmetrical, or the lubrication may be incorrect.

Precautions

① Do not bend the timing belt by force.
It is strictly forbidden to bend the belt, which easily causes breakage

Do not use in direct contact with water, solvent, oil, acid, alkali, UV, ozone, etc.
110302717070 Water110302717070 Acid110302717070 Alkali110302717070 Oil110302717070 UV
③ Please avoid using or keeping at extreme high or low temperatures beyond the operating temperature range, or in humid environments.
④ During installation and maintenance, be sure to cut off the power supply and confirm that the machine is completely stopped before proceeding.
⑤ When there may be impurities, be sure to set the guard.

Application Industries

Food Semiconductor Smartphone
110302717070 Lithium battery 110302717070 Semiconductor 110302717070 Smart phone
Automotive Electronic & Electrical Appliances Medical
110302717070 Automotive 110302717070 Electronic & electrical appliances 110302717070 Medical

Related Products

High Torque Timing Pulleys T5 Type Flat Belts For General Use (Economy Series) Toothed Timing Belt S2M S3M S5M S8M S14M Type
Economic type Toothed timing belt T5 T10 type Related products Economic type Toothed timing belt T5 T10 type Related products Economic type Toothed timing belt T5 T10 type Related products
Reference model: TTPA18T5100-A-NK10 Reference model: HBLT350-4.23 Reference model: C-HTBN400S2M-40
Reason for recommendation: short delivery time, multiple types Reason for recommendation: intended use for transmission, rich variety of specifications and types Reason for recommendation: rich variety of specifications, high cost performance


Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
C-TTBN1380T5-100
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSBelt Shape Belt Tooth Surface Belt Material Belt Type Belt Width (mm)
(mm)
Belt Shape Type Transmission Torque Circumference Length
(mm)
Number of Teeth

SGD 6.10

1 Piece(s)Available Same day 10Closed EndStandard (Single Sided)Rubber BeltT510Trapezoidal Tooth Profile Metric TypeRegular Torque Transmission1380276

Loading...

  1. 1

Basic Information

Core Wire Material Glass Fiber

Please check the type/dimensions/specifications of the part C-TTBN1380T5-100 in the Timing Belts T5 series.

Frequently asked question (FAQ)

Question: Why is the order model of the timing belt inconsistent with the actual belt label and engraving?
Answer: Order model is MISUMI product model, the label on the belt or printed model on the belt surface is the belt manufacturer model, which varies with manufacturer, but there will be no influence on the product itself.
Question: The timing belt has been broken after use for a very short period of time. Is there a problem with the quality of the belt?
Answer: The timing belt is a standard product, and the same batch of products have very few individual quality problems, please refer to Main causes of premature breakage and corresponding countermeasures to troubleshoot the equipment in use.
Question: Can alteration be made to the timing belt?
Answer: Alteration cannot be made to the circumference of the timing belt, and partial alteration can be made to the width.
Question: What kind of belt is better to use under conditions that require high cleanliness?
Answer: The use of urethane belts is recommended, which has significantly improved dust drop, compared to the rubber belt.
Question: What are the two main types of timing belts according to their functions? What is the role?
Answer: Timing belts are mainly divided into transmission type and driving type. For transmission type, the load can be placed on the timing belt surface for transmission. For driving type, no load is carried, and only the role of transmitting torque is played, which is similar to the role of chain.
Question: How to judge or measure whether the belt tension meets the installation requirements?
Answer: It is recommended that the customer purchase the tension meter by himself and make a judgment according to the calculation formula of the initial design.
Question: Which tooth type of the timing belt has the smallest clearance? What will it affect?
Answer: The arc tooth type has minimum clearance, which can improve such indicators as positioning accuracy and rigidity.

Check other FAQ (4 items) Hide

Similar Part Numbers

Part Number
C-TTBN1000T5-250
C-TTBN1020T5-100
C-TTBN1020T5-150
C-TTBN1380T5-150
C-TTBN1380T5-200
C-TTBN1380T5-250
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSBelt Shape Belt Tooth Surface Belt Material Belt Type Belt Width (mm)
(mm)
Belt Shape Type Transmission Torque Circumference Length
(mm)
Number of Teeth

SGD 7.60

1 Piece(s)Available 11 Day(s) 10Closed EndStandard (Single Sided)Rubber BeltT525Trapezoidal Tooth Profile Metric TypeRegular Torque Transmission--

SGD 3.90

1 Piece(s)Available 9 Day(s) 10---------

SGD 5.70

1 Piece(s)Available 9 Day(s) 10---------

SGD 9.06

1 Piece(s)Available Same day 10Closed EndStandard (Single Sided)Rubber BeltT515Trapezoidal Tooth Profile Metric TypeRegular Torque Transmission1380276

SGD 12.02

4 Piece(s)Available 9 Day(s) 10Closed EndStandard (Single Sided)Rubber BeltT520Trapezoidal Tooth Profile Metric TypeRegular Torque Transmission1380276

SGD 14.98

1 Piece(s)Available Same day 10Closed EndStandard (Single Sided)Rubber BeltT525Trapezoidal Tooth Profile Metric TypeRegular Torque Transmission1380276

Tech Support