(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Linear Bushings Straight Single / Double (E-LBM25UU)
- Volume Discount
Linear Bushings Straight Single / Double
These Linear Bushings are an economy item, The price is cheaper than the MISUMI standard product.They offer a wide variety of sizes to choose from.
[Features]
● Support Shaft Diameter Minimum/Maximum (mm.): 5 and 50
● Overall Length Minimum/Maximum (mm.): 15 and 151
● Shape : Straight
● Ball Recirculating Type : Single or Double
● Material:
- Housing - SUJ2 Equivalent
- Ball - SUJ2 Equivalent
[Application]
It is used in industrial machinery such as conveyor systems, packaging machines, and robotic equipment.
Part Number
Configured Part Number is shown.
E-LBM25UU
Economy Straight Linear Bushing
- Precision straight linear bushing for accurate linear motion.
- High-quality SUJ2 equivalent material for durability.
- Available in various shaft diameters
- Single and double ball recirculating types for different needs.
- Ideal for conveyor systems and robotic equipment.
MISUMI Standard
Cheaper Price
Product Variety
3D CAD Support
Through the rolling of steel ball, high-efficiency movement with low friction resistance can be realized.
Dimensional Drawing
This product is delivered at the initial stage, the color of the packing may be inconsistent with the photo, which shall be subject to the actual product.Specifications Overview
| Type | dr[Φ:mm] | Housing | Ball | Retainer | Operating environment temperature |  Accessories | ||
 Material |  Hardness |  Surface Treatment | Material | Material | ||||
| C-LM_UU | 6~30 | Equivalent to SUJ2 | 58HRC～ | － | Equivalent to SUJ2 | Resin | -20~80℃ | Seal packing Material Nitrile Rubber |
| E-LB_UU | 5~50 | |||||||
| E-LBM_UU | 6~45 | Electroless Nickel Plating | ||||||
If there are requirements for rust prevention, give priority to MISUMI standard products with surface treatment of electroless nickel plating or those with low temperature hard chromium plating. | Part Number ( Type ・Diameter ・Length ) | |||
| C-LM8UU E-LB6UU | ||||
■ Dimension Specification Table
| Part Number | O.D. D Tolerance | Overall Length L (Single) | Overall Length L (Double) | B | W | D1 | Eccentricity (maximum) | Number of ball rows | Mass (g) | Basic Rated Load | Double Type Allowable Statice Moment (N・m) | ||||||||||||||||
| Type | dr | Length | Tolerance | E-LB | E-LBM | L | Tolerance | L | Tolerance | Single | Double | Tolerance | Single | Double | |||||||||||||
| Single | Double | Single | Double | Single | Double | Single | Double | C (Dynamic) N | Co (Static) N | C (Dynamic) N | Co (Static) N | ||||||||||||||||
| E-LB_UU (No surface treatment) E-LBM_UU (Electroless Nickel Plating) | 5 | UU | +0.003 -0.012 | 10 | 0 -0.013 | - | 0 -0.015 | - | 15 | +0.2 -0.4 | - | - | 8 | - | 0 -0.4 | 1.1 | 9.6 | 0.024 | - | 4 | 4 | - | 167 | 206 | - | - | - |
| 6 | UU (Single) LUU (Double) | 12 | 0 -0.015 | 0 -0.015 | 19 | 35 | +0.3 -0.6 | 11.3 | 24.8 | 11.5 | 0.03 | 8.5 | 16 | 206 | 265 | 324 | 529 | 2.18 | |||||||||
| 8 | 15 | 24 | 45 | 15.3 | 32.8 | 14.3 | 17 | 31 | 265 | 380 | 431 | 784 | 4.31 | ||||||||||||||
| 10 | 19 | 0 -0.015 | 0 -0.016 | 0 -0.016 | 29 | 55 | 19.4 | 41.4 | 1.3 | 18 | 31 | 62 | 372 | 549 | 588 | 1100 | 7.24 | ||||||||||
| 12 | 21 | 0 -0.018 | 30 | 57 | 20.4 | 43.4 | 20 | 41 | 80 | 412 | 598 | 657 | 1200 | 10.9 | |||||||||||||
| 13 | 23 | 32 | 61 | 22 | 46 | 90 | 510 | 784 | 813 | 1570 | 11.6 | ||||||||||||||||
| 16 | 28 | 37 | 70 | 23.3 | 49.8 | 1.6 | 27 | 5 | 73 | 145 | 775 | 1180 | 1230 | 2350 | 19.7 | ||||||||||||
| 20 | +0.003 -0.013 | 32 | 0 -0.018 | 0 -0.021 | 0 -0.018 | 0 -0.019 | 42 | 80 | 27.3 | 57.8 | 30.5 | 0.03 | 0.04 | 98 | 180 | 882 | 1370 | 1400 | 2740 | 26.8 | |||||||
| 25 | 40 | 59 | +0.2 -0.5 | 112 | +0.3 -0.7 | 37.3 | 78.3 | 0 -0.5 | 1.85 | 38 | 6 | 236 | 440 | 980 | 1570 | 1560 | 3140 | 43.4 | |||||||||
| 30 | 45 | 64 | 123 | 40.8 | 85.3 | 43 | 262 | 480 | 1570 | 2740 | 2490 | 5490 | 82.8 | ||||||||||||||
| 35 | +0.003 -0.014 | 52 | 0 -0.025 | 0 -0.028 | 0 -0.023 | 0 -0.025 | 70 | 135 | 45.3 | 94.8 | 2.1 | 49 | 0.035 | 0.045 | 425 | 795 | 1670 | 3140 | 2650 | 6270 | 110 | ||||||
| 40 | 60 | 80 | 151 | 56.3 | 116.8 | 57 | 654 | 1170 | 2160 | 4020 | 3430 | 8040 | 147 | ||||||||||||||
| 50 | UU | +0.003 -0.015 | 80 | 0 -0.028 | - | 0 -0.025 | - | 100 | - | - | 68.8 | - | 2.6 | 76.5 | - | 1700 | - | 3820 | 7940- | - | - | - | |||||
If there are requirements for rust prevention, give priority to products with surface treatment of electroless nickel plating.Specification of "E-LB" corresponds to the spec of "C-LM". Difference between these 2 type is only Part No.■ Dimension Specification Table
| Part Number | D | L | B | W | D1 | Lateral Misalignment (maximum) | Number of ball rows | Weight (g) | Basic Rated Load | ||||||
| Type | dr | Tolerance | Tolerance | Tolerance | Tolerance | C (Dynamic) N | Co (Static) N | ||||||||
| C-LM_UU | 6 | +0.003 -0.012 | 12 | 0 -0.013 | 19 | +0.2 -0.4 | 11.3 | 0 -0.4 | 1.1 | 11.5 | 0.024 | 4 | 7.4 | 206 | 265 |
| 8 | 15 | 24 | 15.3 | 14.3 | 13 | 265 | 380 | ||||||||
| 10 | 19 | 0 -0.015 | 29 | 19.4 | 1.3 | 18 | 24 | 372 | 549 | ||||||
| 12 | 21 | 30 | 20.4 | 20 | 27 | 412 | 598 | ||||||||
| 16 | 28 | 37 | 23.3 | 1.6 | 27 | 5 | 74 | 775 | 1180 | ||||||
| 20 | +0.003 -0.013 | 32 | 0 -0.018 | 42 | 27.3 | 30.5 | 0.030 | 83 | 882 | 1370 | |||||
| 25 | 40 | 59 | +0.2 -0.5 | 37.3 | 0 -0.5 | 1.9 | 38 | 6 | 206 | 980 | 1570 | ||||
| 30 | 45 | 64 | 40.8 | 43 | 229 | 1570 | 2740 | ||||||||
If there are requirements for rust prevention, give priority to products with surface treatment of electroless nickel plating or those with low temperature hard chromium plating.| Product Drawings | Instructions for use |
 | When the linear bearing is under heavy load (unbalanced load), one piece of single liner type is not applicable. It is recommended to use one piece of double liner type or multiple pieces of single liner type. |
 | Linear bearing is not suitable for rotating motion in structure. If you rotate forcibly, it may cause damage to the product. Please pay attention during use. |
 | Linear bearing is not suitable for repeated plugging and unplugging. |
 | When inserting the guide shaft into the linear bearing, please align the center and insert it slowly, otherwise the steel ball will fall off or the retainer will be deformed. |
Precautions
① Before use, please apply grease to the ball row inside the linear bearing, and then replenish it in due course. Grease forms an oil film on the surfaces of steel ball and rolling surface (guide shaft·bushing) of linear bearing, which effectively reduces friction and prevents sintering. Grease reduction and aging will greatly affect the life of linear bearing.
② Recommended grease: lithium soap grease.
③ Recommended grease filling interval: Usually every 6 months.
When the moving distance is long, it is recommended to move once every three months or when the moving distance exceeds 1000km within the time limit, the 1000km shall prevail.
■ Dust prevention measures:
If dust or foreign matter enters the inside of the linear bearing, it may damage the circulation of steel balls, resulting in unexpected failures. When used in harsh environment, please install dust cover and protection cover, etc.
■ MISUMI linear bearing is recommended to be combined with guide shaft with quenching g6 tolerance.
■ MISUMI linear bearing is recommended to be installed on the holder with H7 tolerance. The linear bearing is in clearance fit with the holder.
Related Products
| Guide shaft Straight bar type | Linear bearing holder assembly Widened square shape | Linear bearing Standard type Straight type | ||
 |  |  | ||
| Typical model: SFJ20-75 | Typical model: LHBB8 | Typical model: LMU8 |
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
| Part Number |
|---|
| E-LBM25UU |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Inscribed Circle Dia. dr (Ø) | Overall Length L (mm) | Outer Cylinder Surface Treatment | Outer Dia. D (Ø) | Ball Recirculating Type | Length | Eccentricity (µm) | Basic Load Rating: Dynamic Load (Details) (N) | Basic Load Rating: Static Load (N) | Inscribed Circle Dia. Tolerance (Negative Side) (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SGD 5.07 | 1 Piece(s) | Available | Same day | 10 | 25 | 59 | [Surface Treatment] Electroless Nickel Plating | 40 | Single | Single | 0.03 | 980 | 1570 | -0.018 |
Loading...
■ Test conditions
•Linear bearing (inner diameter 16) is matched with MISUMI guide shaft (PSFJ) to apply 63kg load and walk for 30km, and confirm the product damage and sliding noise.
■ Test results
The economy series product ensures smooth sliding of steel ball, which have good durability and low noise
*Products circulating on the market are similar products randomly purchased by our company from online or offline markets
*The test data are obtained through testing by our company, which are for reference only
Example of Use
Stamping die position adjustment component
Design Purpose:
Adjust the position of the stamping die to correct the deviation of the opening position in the width direction of the sheet workpiece.
Application Description:
By matching with the cylinder, it realizes the guidance of the linear motion of the workpiece in the horizontal direction.
| Electronic & Electrical Appliances | Automotive | Lithium battery | ||
 |  |  | ||
| LCD | Smart phone | Semiconductor | ||
 |  |  |
Basic Information
| Type | Straight | Style | Standard | Outer Cylinder Material | SUJ2 Equivalent |
|---|---|---|---|---|---|
| Lubrication Type | Not Provided | Accuracy | Standard Grade | Motion | Linear |
| Types | Straight | Ball Material | SUJ2 Equivalent | Retainer Material | Plastic |
| Seal | Provided |
Please check the type/dimensions/specifications of the part E-LBM25UU in the Linear Bushings Straight Single / Double series.
Specification/Dimensions
-
type
- C-LBM
- C-LM
- E-LB
- E-LBL
- E-LBM
-
Inscribed Circle Dia. dr(Ø)
-
Overall Length L(mm)
-
Outer Cylinder Surface Treatment
- No Surface Treatment
- Surface Treatment
-
Outer Dia. D(Ø)
-
Ball Recirculating Type
- Single
- Double
-
Length
- Single
- Double
-
Eccentricity(µm)
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- Same day
- 5 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently asked question (FAQ)
- Question: What brand is the linear bearing of FA?
- Answer: The linear bearing of FA is MISUMI brand.
- Question: What is the difference between the single liner type and the double liner type of linear bearing of FA?
- Answer: Single liner type is one row of steel balls, and double liner type is two rows of steel balls. Generally, the length of the double liner type is more than twice that of the single liner type, and the contact area of steel balls is longer, the radial sway is smaller, and the rated load is larger.
- Question: How is linear bearing maintained regularly?
- Answer: MISUMI recommends that linear bearing is regularly replenished with grease, and it is recommended to do so once every six months. When the moving distance is long, it is recommended to move once every three months or when the moving distance exceeds 1000km within the time limit, the 1000km shall prevail.
- Question: Comparison of antirust ability of linear bearings?
-
Answer:
Antirust ability from strong to weak: Low Temp. Black Chrome Plating → No-Electro Nickel Plated → No Surface Treatment.
Ordinary bearing steel and stainless steel (SUS440C) are easy to rust, so it is necessary to apply anti-rust oil regularly. - Question: Is there a product stamp on the linear bearing?
- Answer: There is no stamp on the product body, and the product model is on the packaging box.
- Question: When the linear bearing and the guide shaft are used together, some are closely matched, but some have relatively large clearance. Does it affect the use?
- Answer: The linear bearing and the guide shaft are in point contact and rolling fit through the circulating steel ball structure. Because of point contact and non-interference fit, it is normal to Provided Clearance between the shaft and the bearing, which will not affect the use. The use of this structure greatly reduces the friction resistance and prolongs the service life of the workpiece.
- Question: How to deal with oil leakage in the received linear bearing?
- Answer: Linear bearing is coated with anti-rust oil (except for MX grease device) when leaving the factory, which has little influence on grease. It is recommended to clean it with ultrasonic cleaner or engine oil before use and apply grease after drying.
- Question: How much load does linear bearing carry?
- Answer: For specific load carried, please refer to Load Carried information
- Question: Can linear bearing be rotated?
- Answer: The linear bearing is not suitable for rotating motion in structure. If it is forcibly rotated, it may cause damage to the product. If rotating motion is required, please give priority to linear type rotating bushings.
Similar Part Numbers
| Part Number |
|---|
| C-LM8UU |
| E-LB10LUU |
| E-LB10UU |
| E-LBM30LUU |
| E-LBM30UU |
| E-LBM35LUU |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Inscribed Circle Dia. dr (Ø) | Overall Length L (mm) | Outer Cylinder Surface Treatment | Outer Dia. D (Ø) | Ball Recirculating Type | Length | Eccentricity (µm) | Basic Load Rating: Dynamic Load (Details) (N) | Basic Load Rating: Static Load (N) | Inscribed Circle Dia. Tolerance (Negative Side) (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SGD 1.56 | 1 Piece(s) | Available | Same day | 10 | 8 | 24 | No Surface Treatment | 15 | Single | Single | 24 | 265 | 380 | -0.012 | |
SGD 4.20 | 1 Piece(s) | Available | Same day | 10 | 10 | 55 | No Surface Treatment | 19 | Double | Double | 30 | 588 | 1100 | +0.003 -0.012 | |
SGD 2.00 | 1 Piece(s) | Available | Same day | 10 | 10 | 29 | No Surface Treatment | 19 | Single | Single | 24 | 372 | 549 | +0.003 -0.012 | |
SGD 11.54 | 4 Piece(s) | Available | 5 Day(s) | 10 | 30 | 123 | [Surface Treatment] Electroless Nickel Plating | 45 | Double | Double | 0.04 | 2490 | 5490 | -0.019 | |
SGD 5.90 | 1 Piece(s) | Available | Same day | 10 | 30 | 64 | [Surface Treatment] Electroless Nickel Plating | 45 | Single | Single | 0.03 | 1570 | 2740 | -0.018 | |
SGD 20.32 | 4 Piece(s) | Available | 5 Day(s) | 10 | 35 | 135 | [Surface Treatment] Electroless Nickel Plating | 52 | Double | Double | 0.045 | 2650 | 6270 | -0.025 |
Tech Support
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?