(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
7 Million Products, 2,000 Brands.
50,000 Stock items for Same Day Ship Out.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
Quote / Order
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (SGT) 25/11/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Miniature Linear Guides Long Blocks (E-MLGB9H)
- Volume Discount
MiSUMi Economy
Miniature Linear Guides Long Blocks
These linear guides or linear slides are an economy item, The price is cheaper than the MISUMI standard product.They offer a wide variety of sizes to choose from.
[Feature]
● Rail Length Minimum/Maximum (mm.): 40 and 670
● Assembly Height (mm.): 8, 10, 13, and 16
● Option: Set (Rail + Block) / Block only
● Material: Rail- Bearing Steel, Block - SUS440C
[Application]
It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.
Part Number
Configured Part Number is shown.
E-MLGB9H
Economy Miniature Linear Guide - Long Block
PrecisionVersatilityCost-effective
- Rail lengths available in multiple options
- Multiple assembly heights available
- Options for rail and block set or block only
- Constructed with Carbon Steel for durability
- Economical choice compared to standard MISUMI products
MISUMI Standard
Cheaper Price
Product Variety
3D CAD Support
Product Overview
Linear guides (also known as slide rails or linear slides) are designed for precise linear motion and are used in high-precision applications. They provide higher load capacity and motion accuracy than linear bearings of the same size.These guides use rolling elements (such as steel balls) instead of an intermediate medium, allowing for smooth, precise movement even under high load conditions. They are commonly used in equipment like CNC machines, robotics, and automated systems.
Product Comparison
| MISUMI Standard Product SSELB8-100 | Economy Series E-GMLG7H-100 | |
| Material | Stainless Steel | Carbon Steel |
| Hardness | 56HRC up | 58HRC up |
| Basic Rated Load C (Dynamic) (kN) | 1.6 | 1.37 |
| Basic Rated Load Co (Static) (kN) | 2.4 | 1.96 |
| Static Allowable Moment MA/MB (N・m) | 7.5 | 4.8 |
| Static Allowable Moment MC (N・m) | 9 | 7.64 |
| Height H Tolerance Difference (μm) | ±20 | ±20 |
| Height H Pair Variation Difference (μm) | 15 | 40 |
| Width N Tolerance Difference (μm) | ±25 | ±25 |
| Width N Pair Variation Difference (μm) | 20 | 40 |
| Running Parallelism Guarantee (μm)* | 7 | 15 |
| Preload Management | Y | N |
| RoHS10 | Compliant | Compliant |
Dimensional Drawing
■ Material
| Type |  Material |  Rail Surface Treatment |  Hardness | Preload | |
| Guide Rail | Block | ||||
| E－MLG | Bearing Steel | Stainless Steel | - | 58-62HRC | Z0 Ordinary Grade No Gap Type |
| E－GMLG | Vacuum evaporated chrome plating | ||||
| E－SMLG | Stainless Steel | - | 55-58HRC | ||
| E－MLGB | - | Stainless Steel | - | - | |
Specification Table
■ Component kit
| Part Number |  Length L(1mm increments) | Block Dimensions (mm) | Guide Rail Dimensions (mm) | ||||||||||||||||
 Type |  Nominal Model | W | B | B1 | L1 | L2 | C | M×ℓ | H2 | Gn | WR | HR | N | H | H1 | Counterbore d×D×h | P | E | |
E－MLG | 7H | 40～900 | 17 | 12 | 2.5 | 20.75 | 30.71 | 13 | M2×2.5 | 1.5 | Φ1.2 | 7 | 4.8 | 5 | 8 | 1.5 | 2.4×4.2×2.3 | 15 | Please refer to the L specified size calculation table |
| 9H | 45～900 | 20 | 15 | 28.5 | 39.9 | 16 | M3×3 | 1.8 | Φ1.4 | 9 | 6.5 | 5.5 | 10 | 2 | 3.6×6×3.5 | 20 | |||
| 12H | 60～900 | 27 | 20 | 3.5 | 30.8 | 44.78 | 20 | M3×3.5 | 2.5 | Φ2 | 12 | 8 | 7.5 | 13 | 3 | 3.6×6×4.5 | 25 | ||
| 15H | 70～900 | 32 | 25 | 41.8 | 57.96 | 25 | M3×4 | 3 | M3 | 15 | 10 | 8.5 | 16 | 4 | 3.6×6×4.5 | 40 | |||
| Part Number | Block Dimensions (mm) | |||||||||
| Type | Nominal Model | W | B | B1 | L1 | L2 | C | M×ℓ | H2 | Gn |
| E－MLGB | 7H | 17 | 12 | 2.5 | 20.75 | 30.71 | 13 | M2×2.5 | 1.5 | Φ1.2 |
| 9H | 20 | 15 | 28.5 | 39.9 | 16 | M3×3 | 1.8 | Φ1.4 | ||
| 12H | 27 | 20 | 3.5 | 30.8 | 44.78 | 20 | M3×3.5 | 2.5 | Φ2 | |
| 15H | 32 | 25 | 41.8 | 57.96 | 25 | M3×4 | 3 | M3 | ||
The dimensional tolerance of L length is ±1mm and the dimensional tolerance of E end distance is ±0.5mm■ L Detailed dimension of dimension specified type
Dimension L specified type cuts both ends of the rail equally. Refer to the table below for the number of mounting holes (M) of the slide rail at this time.
In addition, E dimension is calculated with the formula below.
L : Guide Rail length
M: Guide Rail mounting holes
P: Guide Rail holes pitch
■ Economical Miniature Linear Guide - Standard Guide -
| Nominal Model | 7H | 9H | 12H | 15H | Number of mounting holes M |
| L | - | 45～47 | - | 70～87 | 2 |
| 40～50 | 48～67 | 60～82 | 88～127 | 3 | |
| 51～65 | 68～87 | 83～107 | 128～167 | 4 | |
| 66～80 | 88～107 | 108～132 | 168～207 | 5 | |
| 81～95 | 108～127 | 133～157 | 208～247 | 6 | |
| 96～110 | 128～147 | 158～182 | 248～287 | 7 | |
| 111～125 | 148～167 | 183～207 | 288～327 | 8 | |
| 126～140 | 168～187 | 208～232 | 328～367 | 9 | |
| 141～155 | 188～207 | 233～257 | 368～407 | 10 | |
| 156～170 | 208～227 | 258～282 | 408～447 | 11 | |
| 171～185 | 228～247 | 283～307 | 448～487 | 12 | |
| 186～200 | 248～267 | 308～332 | 488～527 | 13 | |
| 201～215 | 268～287 | 333～357 | 528～567 | 14 | |
| 216～230 | 288～307 | 358～382 | 568～607 | 15 | |
| 231～245 | 308～327 | 383～407 | 608～647 | 16 | |
| 246～260 | 328～347 | 408～432 | 648～687 | 17 | |
| 261～275 | 348～367 | 433～457 | 688～727 | 18 | |
| 276～290 | 368～387 | 458～482 | 728～767 | 19 | |
| 291～305 | 388～407 | 483～507 | 768～807 | 20 | |
| 306～320 | 408～427 | 508～532 | 808～847 | 21 | |
| 321～335 | 428～447 | 533～557 | 848～887 | 22 | |
| 336～350 | 448～467 | 558～582 | 888～900 | 23 | |
| 351～365 | 468～487 | 583～607 | - | 24 | |
| 366～380 | 488～507 | 608～632 | 25 | ||
| 381～395 | 508～527 | 633～657 | 26 | ||
| 396～410 | 528～547 | 658～682 | 27 | ||
| 411～425 | 548～567 | 683～707 | 28 | ||
| 426～440 | 568～587 | 708～732 | 29 | ||
| 441～455 | 588～607 | 733～757 | 30 | ||
| 456～470 | 608～627 | 758～782 | 31 | ||
| P | 15 | 20 | 25 | 40 |
| Nominal Model | 7H | 9H | 12H | 15H | Number of mounting holes M |
| L | 471～485 | 628～647 | 783～807 | - | 32 |
| 486～500 | 648～667 | 808～832 | 33 | ||
| 501～515 | 668～687 | 833～857 | 34 | ||
| 516～530 | 688～707 | 858～882 | 35 | ||
| 531～545 | 708～727 | 883～900 | 36 | ||
| 546～560 | 728～747 | - | 37 | ||
| 561～575 | 748～767 | 38 | |||
| 576～590 | 768～787 | 39 | |||
| 591～605 | 788～807 | 40 | |||
| 606～620 | 808～827 | 41 | |||
| 621～635 | 828～847 | 42 | |||
| 636～650 | 848～867 | 43 | |||
| 651～665 | 868～887 | 44 | |||
| 666～680 | 888～900 | 45 | |||
| 681～695 | - | 46 | |||
| 696～710 | 47 | ||||
| 711～725 | 48 | ||||
| 726～740 | 49 | ||||
| 741～755 | 50 | ||||
| 756～770 | 51 | ||||
| 771～785 | 52 | ||||
| 786～800 | 53 | ||||
| 801～815 | 54 | ||||
| 816～830 | 55 | ||||
| 831～845 | 56 | ||||
| 846～860 | 57 | ||||
| 861～875 | 58 | ||||
| 876～890 | 59 | ||||
| 891～900 | 60 | ||||
| P | 15 | 20 | 25 | 40 |
Alterations
| Alterations |  Code | Spec. | ||||||||
Change to Tapped Holes | MC | Ordering code: MC Change counterbored holes for fixing a guide to tapped holes.
| ||||||||
| 2-Block Specifications | B2 | 1 block added to 1-block product to ship as 2 block item. If the rail is too short to fit multiple blocks, the blocks will be shipped in a separate package. | ||||||||
| 3-Block Specifications | B3 | 2 blocks added to 1-block product to ship as 3 block item.If the rail is too short to fit multiple blocks, the blocks will be shipped in a separate package. | ||||||||
| 4-Block Specifications | B4 | 3 blocks added to 1-block product to ship as 4 block item.If the rail is too short to fit multiple blocks, the blocks will be shipped in a separate package. | ||||||||
| Preload adjustment | ZF | Change Z0: zero preload to ZF: Normal clearance Z1: Light preload Z2: Medium preload | ||||||||
| Z1 | ||||||||||
| Z2 | ||||||||||
| Rail End Cut | Left End Cut ES | Specify the edge distance in 0.5 mm increments. When the specified edge distance exceeds or is close to the hole spacing, cutting may result in hole breakage.EB + ES = 2E. In cases where cutting is not feasible, distribute the dimensions evenly according to the standards. | ||||||||
| Right End Cut EB |
Precision Benchmark
●Dimensional Precision
Unit：μm
| Linear Guide Type | Precision Criteria | MISUMI Standard Products |
| Miniature Linear Guide | Height H Tolerance | ±40 |
| Height H Pair Variation | 40 | |
| Width N Tolerance | ±40 | |
| Width N Pair Variation | 40 |
●Running Parallelism
| Rail Length (mm) | Accuracy grade (μm) |
| 50 or Less | 16 |
| 50-80 | 18 |
| 80-125 | 21 |
| 125-200 | 21 |
| 200-250 | 22 |
| 250-315 | 23 |
| 315-400 | 25 |
| 400-500 | 26 |
| 500-630 | 28 |
| 630-800 | 30 |
| 800-900 | 32 |
[Running Parallelism]
The values in the table are all measured after the slide rail is fixed on the reference base.
When moving the slider within the full length of the slide rail, measure the change of the block upper surface C relative to the slide rail bottom surface A and the change of the block reference surface D relative to the slide rail reference surface B.
Allowable Load
| Nominal model | Basic Rated Load | Static Allowable Moment | Mass | |||
| C(Dynamic） kN | Co（Static） kN | MA・MB N.m | MC N.m | Blocks kg | Guide Rails kg/m | |
| 7H | 1.37 | 1.96 | 4.8 | 7.64 | 0.0124 | 0.22 |
| 9H | 2.55 | 4.02 | 18.62 | 19.6 | 0.0215 | 0.38 |
| 12H | 3.72 | 5.88 | 36.26 | 38.22 | 0.044 | 0.65 |
| 15H | 6.37 | 9.11 | 57.82 | 73.5 | 0.0847 | 1.06 |
Product Features
Feature 1: New construction, greatly reducing noise and improving smoothness.
Feature 2: The slide rail and the slider are in contact with each other through the rolling ball, so the shaking is small, and it is suitable for equipment with precision requirements.
Feature 3: Due to a point-to-surface contact, the frictional resistance is small, and it can perform subtle movements to achieve high precision positioning of the control device.
Feature 4: It has a large allowable load because the force on the rotating surface is dispersed due to the rolling groove of the ball.
Feature 5: It is suitable for high speed motion because it is not easy to produce friction heat when operating and not easily deformed by heat.
Feature 2: The slide rail and the slider are in contact with each other through the rolling ball, so the shaking is small, and it is suitable for equipment with precision requirements.
Feature 3: Due to a point-to-surface contact, the frictional resistance is small, and it can perform subtle movements to achieve high precision positioning of the control device.
Feature 4: It has a large allowable load because the force on the rotating surface is dispersed due to the rolling groove of the ball.
Feature 5: It is suitable for high speed motion because it is not easy to produce friction heat when operating and not easily deformed by heat.
Usage Method
■ About use
① MISUMI's linear guide is installed with a retainer. Although the ball is not easy to fall off when the slide block is removed, the ball may fall off if the slider is removed from the rail at high speed, or tilted into the slide rail. Please disassemble the slider with care.
② Be sure to avoid colliding the ball back groove cover, otherwise it will affect the ball cycling, resulting in poor sliding.
③ If you have anti-rust requirements, please choose the Vacuum Chrome Plating Surface Treatment or Stainless Steel SUS440C products.
■ About maintenance (supply of grease)
① Grease forms an oil film on the surface of the linear guide ball and rail surface to effectively reduce friction and prevent sintering.
Decrease and aging of grease will greatly affect the life of the linear guide, so please add grease at the right time according to the service conditions.
MISUMI's linear guides are sealed with the greases listed below at the time of shipment, so they can be used directly.
② Recommend grease filling interval:
Usually every 6 months.
For longer moving distance, 3 months, or when the moving distance exceeds 1000km within the time limit, the 1000km shall prevail.
*The above is the grease injection interval under the moving distance standard. Depending on the operating environment, the grease injection interval must be shortened appropriately when the grease is aging and dirty.
① MISUMI's linear guide is installed with a retainer. Although the ball is not easy to fall off when the slide block is removed, the ball may fall off if the slider is removed from the rail at high speed, or tilted into the slide rail. Please disassemble the slider with care.
② Be sure to avoid colliding the ball back groove cover, otherwise it will affect the ball cycling, resulting in poor sliding.
③ If you have anti-rust requirements, please choose the Vacuum Chrome Plating Surface Treatment or Stainless Steel SUS440C products.
■ About maintenance (supply of grease)
① Grease forms an oil film on the surface of the linear guide ball and rail surface to effectively reduce friction and prevent sintering.
Decrease and aging of grease will greatly affect the life of the linear guide, so please add grease at the right time according to the service conditions.
MISUMI's linear guides are sealed with the greases listed below at the time of shipment, so they can be used directly.
② Recommend grease filling interval:
Usually every 6 months.
For longer moving distance, 3 months, or when the moving distance exceeds 1000km within the time limit, the 1000km shall prevail.
*The above is the grease injection interval under the moving distance standard. Depending on the operating environment, the grease injection interval must be shortened appropriately when the grease is aging and dirty.
Precautions
For normal use, the installation of the linear guide needs to meet the following four points:
① Whether the shape of the mounting surface produces interference
② Keep the flatness of the workpiece mounting surface at about 5μ, otherwise the slider will be slightly deformed
③ Whether the error values of guide parallelism and fitting height are within the allowable installation values
④ Use the standard
installation method Click
here for the detailed installation method
② Keep the flatness of the workpiece mounting surface at about 5μ, otherwise the slider will be slightly deformed
③ Whether the error values of guide parallelism and fitting height are within the allowable installation values
④ Use the standard
installation method Click
here for the detailed installation methodExample of Use
Mechanism Name: 4 times stroke slide
Feature 1: suitable for medium frequency driving and positioning.
Feature 2: transfer the light workpiece on the worktable according to 4 times the distance of the cylinder stroke.
For details, click here
Feature 1: suitable for medium frequency driving and positioning.
Feature 2: transfer the light workpiece on the worktable according to 4 times the distance of the cylinder stroke.
For details, click
hereApplication Industries
| Medical | Smart phone | |
 |  | |
| Robotics | Electronic & Electrical Appliances | |
 |  |
Related Products
| Miniature Linear Guides | Medium Load linear guide | Heavy Load linear guide | ||
 |  |  | ||
| Typical model: SSEBZ10-55 | Typical model: SVR24-280 | Typical model: SXR24-280 |
Related Documents
For the installation and use of linear guides, please refer to here
herePart Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| E-MLGB9H |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Block Type | Assembly Height H (mm) | Nominal Part Number | Rail Type | Set / Single Item | Preload | Accuracy Standards | Material | No. of Blocks | Lubrication Type | Lubrication Type | L Dimension Type | Applicable Linear Guide | Block Material (Surface Treatment) | Rail Material (Surface Treatment) | Rail Surface Treatment | Length L (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SGD 9.28 | 1 Piece(s) | Available | 6 Day(s) | 10 | [Long] Long Block | 10 | 9 | Standard Rail | Block Only | [Clearance] Normal Clearance | Standard Grade | Stainless Steel | - | - | - | - | E-GMLG9H / E-SMLG9H | Carbon Steel (Bearing Steel) | - | - | - |
Loading...
Basic Information
| Ball Arrangement | Miniature Type | Retainer | N/A | Rolling Element | Ball |
|---|
Please check the type/dimensions/specifications of the part E-MLGB9H in the Miniature Linear Guides Long Blocks series.
Specification/Dimensions
-
No. of Blocks
- 1
-
Lubrication Type
- Lubrication Applied
-
Lubrication Type
- Lithium Grease Filled
-
L Dimension Type
- Specified Type
-
Rail Material (Surface Treatment)
- Carbon Steel (Bearing Steel)
- Stainless Steel
-
Rail Surface Treatment
- Vacuum evaporated chrome plating
- none
-
Length L(mm)
-
Block Type
- Long
- Long
-
Assembly Height H(mm)
-
Nominal Part Number
-
Rail Type
-
Standard Rail
-
-
Set / Single Item
- Set
- Block Only
-
Preload
- Clearance
- Clearance
-
Accuracy Standards
- Standard Grade
-
Material
- Carbon Steel
- Stainless Steel
-
Applicable Linear Guide
-
Block Material (Surface Treatment)
- Carbon Steel (Bearing Steel)
- Stainless Steel
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- Same day
- 6 Day(s) or Less
- 9 Day(s) or Less
- 15 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently asked question (FAQ)
- Question: Can linear guides or sliders be purchased separately?
- Answer: Taking into account the accuracy of products, single slider models clearly indicated in the catalog can be purchased, and no others can be purchased.
- Question: Can the stainless steel guide rails be guaranteed not to rust?
- Answer: Stainless steel is a product that has a certain antirust function compared to carbon steel, but it cannot be guaranteed that it will never rust. Depending on the operating environment, there may also be short-term rust.
- Question: What problems should be paid attention to when the linear guide is installed vertically?
- Answer: Attention should be paid to prevent the slider from falling off and causing the balls to fall off during installation.
- Question: What does micro preloading in linear guide mean?
- Answer: MISUMI's linear guides control the clearance by selecting the size of the internal ball. Through the negative clearance, the rigidity is improved and the elastic displacement is reduced. This is preloading. Generally speaking, the life and accuracy of the micro preloading type will be better than that of the standard clearance type.
- Question: Linear guide indicators include basic dynamic load rating and basic static load rating. Which indicator is the reference when selecting?
- Answer: The basic dynamic load rating is used to calculate the rail life, and the basic static load rating is used to calculate the maximum allowable load.
- Question: Can the corresponding linear guide products be selected according to the third-party guide rail model?
- Answer: MISUMI offers third-party brand replacement services, so as long as the third party product model is given, we can replace it with corresponding MISUMI model. For details, please contact the customer service email or call the customer service phone.
- Question: Can the rail or slider be repaired if it is damaged?
- Answer: Repair service is not provided, re-purchase is recommended.
- Question: Can linear guide length be arbitrarily specified?
- Answer: It can be specified arbitrarily. However, MISUMI linear guides are divided into length fixed type and length specified type, and in case of length specified type, the length dimensions for length fixed type cannot be specified.
Similar Part Numbers
| Part Number |
|---|
| E-GMLGB9H |
| E-MLGB12H |
| E-MLGB15H |
| E-SMLGB12H |
| E-SMLGB15H |
| E-SMLGB20H |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Block Type | Assembly Height H (mm) | Nominal Part Number | Rail Type | Set / Single Item | Preload | Accuracy Standards | Material | No. of Blocks | Lubrication Type | Lubrication Type | L Dimension Type | Applicable Linear Guide | Block Material (Surface Treatment) | Rail Material (Surface Treatment) | Rail Surface Treatment | Length L (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SGD 14.80 | 1 Piece(s) | Available | 15 Day(s) | - | - | - | - | - | - | - | - | - | - | Lubrication Applied | - | - | - | - | - | - | - | |
SGD 10.79 | 1 Piece(s) | Available | Same day | 10 | [Long] Long Block | 13 | 12 | Standard Rail | Block Only | [Clearance] Normal Clearance | Standard Grade | Stainless Steel | - | - | - | - | E-GMLG12H / E-SMLG12H | Carbon Steel (Bearing Steel) | - | - | - | |
SGD 12.81 | 1 Piece(s) | Available | Same day | 10 | [Long] Long Block | 16 | 15 | Standard Rail | Block Only | [Clearance] Normal Clearance | Standard Grade | Stainless Steel | - | - | - | - | E-GMLG15H / E-SMLG15H | Carbon Steel (Bearing Steel) | - | - | - | |
SGD 14.80 | 1 Piece(s) | Available | 9 Day(s) | 10 | - | - | - | - | - | - | - | - | - | Lubrication Applied | - | - | - | - | - | - | - | |
SGD 16.60 | 1 Piece(s) | Available | 9 Day(s) | 10 | - | - | - | - | - | - | - | - | - | Lubrication Applied | - | - | - | - | - | - | - | |
SGD 28.40 | 1 Piece(s) | Available | 6 Day(s) | 10 | - | - | - | - | - | - | - | - | - | Lubrication Applied | - | - | - | - | - | - | - |
Tech Support
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?