(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (SGT) 25/11/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Linear Bushing - Compact, Single / Double[RoHS Compliant]
![Linear Bushing - Compact, Single / Double[RoHS Compliant]](http://content.misumi-ec.com/image/upload/t_product_main/t_misumi_wm/v1/p/jp/product/series/110310862739/110310862739_20230801153200.jpg?$product_main$)
- Volume Discount
RoHS10 compliant.
Medium-precision linear bushing with relaxed O.D. tolerances such as I.D. and L dimension.
(i)Caution
- Bushings are applied with anti-rust oil harmless to lubricants. After cleaning (recommended cleaning method: ultrasonic cleaner or white kerosene) and drying the bushings, grease application is recommended before use.
Part Number
Configured Part Number is shown.
Dimensional Drawing
Type | Outer Cylinder | Balls | Retainer | Operating Ambient Temperature | [A] Accessory | |||
Single | Double | [M] Material | [H] Hardness | [S] Surface Treatment | [M] Material | [M] Material | ||
C-LMK | C-LMKW | SUJ2 Equivalent | 58HRC or more | — | SUJ2 Equivalent | Plastic | －20 to 80°C | Seal [M] Material Nitrile Rubber |
Specification Table
| Part Number (Type, dr) |
| C-LMK6 |
| C-LMKW12 |
dr | D | L | B | W | D1 | Eccentricity (Max.) | Balls Rows | Basic Load Rating | Reference Mass | |||||
Tolerance | Tolerance | Tolerance | Tolerance | C (Dynamic) N | Co (Static) N | (g) | ||||||||
6 | +0.003 -0.012 | 10 | +0.006 -0.013 | 19 | +0.2 -0.4 | 11.3 | 0 -0.4 | 1.15 | 9.6 | 0.024 | 6 | 131 | 155 | 6 |
8 | 13 | 24 | 15.3 | 12.4 | 235 | 277 | 12 | |||||||
10 | 17 | 29 | 19.4 | 16.2 | 368 | 433 | 26 | |||||||
12 | 19 | +0.006 -0.015 | 30 | 20.4 | 1.35 | 18 | 381 | 449 | 32 | |||||
16 | 26 | 37 | 23.3 | 24.9 | 608 | 716 | 58 | |||||||
dr | D | L | B | W | D1 | Eccentricity (Max.) | Balls Rows | Basic Load Rating | Allowable Static Moment (N⋅m) | Reference Mass | |||||
Tolerance | Tolerance | Tolerance | Tolerance | C (Dynamic) N | Co (Static) N | (g) | |||||||||
6 | +0.003 -0.016 | 10 | +0.006 -0.015 | 35 | +0.3 -0.6 | 24.8 | 0 -0.6 | 1.15 | 9.6 | 0.03 | 6 | 206 | 309 | 2.46 | 12 |
8 | 13 | 45 | 32.8 | 12.4 | 383 | 555 | 5.76 | 24 | |||||||
10 | 17 | 55 | 41.4 | 16.2 | 585 | 867 | 10.99 | 52 | |||||||
12 | 19 | 0.006 -0.018 | 57 | 43.4 | 1.35 | 18 | 608 | 899 | 11.85 | 64 | |||||
16 | 26 | 70 | 49.8 | 24.9 | 965 | 1431 | 23.48 | 116 | |||||||
[ ! ] For shaft and housing tolerances, see "Recommended Tolerance of Shaft Diameter / Housing Diameter."
kgf = N × 0.101972
dr | Shaft Dia. | Housing Dia. | |
g6 Tolerance | Tolerance | ||
6 | −0.004 −0.012 | 10 | +0.024 +0.006 |
8 | −0.005 −0.014 | 13 | |
10 | 17 | +0.027 +0.006 | |
12 | −0.006 −0.017 | 19 | |
16 | 26 | ||
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
| Part Number |
|---|
| C-LMK6 |
| C-LMK8 |
| C-LMK10 |
| C-LMK12 |
| C-LMK16 |
| C-LMKW6 |
| C-LMKW8 |
| C-LMKW10 |
| C-LMKW12 |
| C-LMKW16 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Overall Length L (mm) | Outer Dia. D (Ø) | Length | Eccentricity (µm) | Basic Load Rating: Static Load (N) | Inscribed Circle Dia. Tolerance (Negative Side) (mm) | Basic Rated Load, Dynamic Rating (N) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
SGD 6.50 | 1 Piece(s) | Available | 4 Day(s) or more | 10 | - | - | Single | 24 | 155 | -0.012 | 131 | |
SGD 6.50 | 1 Piece(s) | Available | 4 Day(s) or more | 10 | - | 13 | Single | 24 | 277 | -0.012 | 235 | |
SGD 6.80 | 1 Piece(s) | Available | 4 Day(s) or more | 10 | - | 17 | Single | 24 | 433 | -0.012 | 368 | |
SGD 7.00 | 1 Piece(s) | Available | 4 Day(s) or more | 10 | - | - | Single | 24 | 449 | -0.012 | 381 | |
SGD 8.90 | 1 Piece(s) | Available | 4 Day(s) or more | 10 | - | - | Single | 24 | 716 | -0.012 | 608 | |
SGD 12.42 | 1 Piece(s) | Available | 4 Day(s) or more | 10 | 35 | - | Double | 30 | 309 | -0.016 | 206 | |
SGD 9.80 | 1 Piece(s) | Available | 4 Day(s) or more | 10 | - | 13 | Double | 30 | 555 | -0.016 | 383 | |
SGD 12.80 | 1 Piece(s) | Available | 4 Day(s) or more | 10 | 55 | 17 | Double | 30 | 867 | -0.016 | 585 | |
SGD 10.50 | 1 Piece(s) | Available | 4 Day(s) or more | 10 | 57 | - | Double | 30 | 899 | -0.016 | 608 | |
SGD 13.20 | 1 Piece(s) | Available | 4 Day(s) or more | 10 | - | - | Double | 30 | 1431 | -0.016 | 965 |
Loading...
(1) For grease lubrication, apply grease to the ball rows within the linear bushings before use, then periodically apply grease during the use.
The grease has an effect of reducing friction by forming a layer between the balls and shaft rolling surfaces, preventing seizures.
Grease loss and deterioration will cause shorter life of linear guides.
(2) Recommended Grease: Lithium soap based grease
(3) Recommended Lubrication Intervals: Every 6 month
Recommended lubrication is that every 3 months when travel distance is extensive, or every 1000 km when travel distance exceeds 1000 km within the period.
(4) If large moment load (offset load) is to be applied, Short / Single Type Linear Bushings are not suitable.
Use of Double Type or Multiple Linear Bushings is recommended.
■Dust-Proofing Measures
Please be aware that if foreign objects or dusts get inside the linear bushing, it will interfere with the circulation of the steel balls and cause failures.
Please attach a dust cover or protection cover for harsh usage environments.
■Use of a hardened shaft with g6 tolerance is recommended for MISUMI Linear Bushings.
| Illustration | Instructions for Use |
 | If large load (offset load) is to be applied, Single Type Linear Bushings are not suitable. Use of Double Type or Multiple Linear Bushings is recommended. |
 | Linear Bushings are not suitable for rotating motion due to their structure. Forcing to rotate may cause failures. |
 | Linear Bushings are not suitable for usage with repetitive insertion and extraction of shafts. |
 | When assembling with linear shafts, forcing the shaft into the bushing with angular misalignment may cause the ball retainers to deform and balls to fall out. Be sure to align the centers and insert the shaft gently. |
▲Oil Seal Press Fitting Jig
Basic Information
| Type | Straight | Outer Cylinder Material | SUJ2 Equivalent | Outer Cylinder Surface Treatment | No Surface Treatment |
|---|---|---|---|---|---|
| Lubrication Type | Not Provided | Types | Standard Flange | Linear Motion / Rotational Motion | Linear Bushing (Linear Motion Only) |
| Ball Material | SUJ2 Equivalent | Retainer Material | Plastic | Seal | With Seal |
Specification/Dimensions
-
Overall Length L(mm)
-
Outer Dia. D(Ø)
-
Length
- Single
- Double
-
Eccentricity(µm)
-
Basic Rated Load, Dynamic Rating(N)
-
type
- C-LMK
- C-LMKW
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 4 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?