(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

  • Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 15/12/2024 to 6:00 (SGT) 16/12/2024. We apologize for the inconvenience.
  • Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

Flat Belts Idlers Width 25 - 100 (Part Numbers)

Part Number

Configured Part Number is shown.

Product Overview
Usually, flat-belt pulleys and flat belts are widely used in mechanisms design for transmitting rotational power generated by motors.
Driving and transmission are realized through the friction fit between flat-belt pulleys and flat belts.
Dimensional Drawing
Specifications Drawing of MISUMI Idlers for Flat Belts Width L=25-100
Bearing is pressed fit.
Bearing cannot be removed.
The tolerance accuracy of T is ±0.2mm. Please select the idler model after confirming the width tolerance of the flat belt.
Specifications Overview
Specifications Overview of Idlers for Flat Belts Width L=25-100
If there are requirements for rust prevention, give priority to products with surface treatment of electroless nickel plating or those made of austenitic stainless steel.
 Refer to the Surface Treatment and Rust Prevention Methods
Specification Table
Part Numberd1mm incrementsCrosspiece Groove Straight Only
0.1mm increments
Crowned Only
Optional
d1Bearing sizeF
TypeDLXYZHNo.D1B
Straight
E-ROFAN
E-ROFAF


Crosspiece Groove Straight
E-ROFAM

Crowned
E-ROFAC



Crosspiece Groove Straight type is only
available when D=30 or larger.
15(5)



Straight
Crowned
25-100

Crosspiece Groove Straight
50-100





L≥B×2+2
---0.3

0.5

0.8
7B675ZZ82.5-
(6)9B676ZZ103
20(6)10B686ZZ135-
(8)10B678ZZ123.5
25610B696ZZ15526
(8)B688ZZ16
3087.0~15.05.0~12.02.0~4.515B698ZZ19631
(10)B6900ZZ22
(12)B6901ZZ24
35104.0~6.017B6900ZZ22636
12B6901ZZ24
(15)B6902ZZ287
4084.0~7.017B628ZZ24841
10B6000ZZ26
12B6901ZZ246
15B6902ZZ287
(20)4.0~6.022B6804ZZ32
50104.0~7.017B6200ZZ30951
1222B6001ZZ288
1517B6902ZZ7
2027B6904ZZ379
(25)B6905ZZ42
601222B6201ZZ321061
15B6002ZZ9
20B6904ZZ379
2532B6905ZZ42
30B6906ZZ47
802541B6205ZZ521581
30B6006ZZ5513
35B6907ZZ10
*T=6 is not available for the crowned type.
* 2 For the crowned type with T=16 or D=35 or 40, the dimensions of the bearing are values in ( ).
Refer to the detailed dimensions of the relevant bearing.
MISUMI makes no commitment to the bearing brand.
E-HBGP is only available in specifications marked with *.
The tolerance accuracy of T is ±2mm. Please select the idler model after confirming the width tolerance of the flat belt.
Product Features
Feature 1: MISUMI idlers for flat belts are suitable for conveying design and also play the role of tensioning the belt.
Feature 2: MISUMI idlers for flat belts are available in ordinary straight type, flanged type, crowned type effectively restraining running deviation, and crosspiece groove straight type effectively preventing running deviation, and are suitable for a wide range of design requirements.
Feature 3: With polyacetal products available, MISUMI idlers for flat belts are suitable for a variety of applications.
Feature 4: MISUMI idlers for flat belts use standard class 0 bearings and meet the industry standards.
Usage Method
■ Intend Use for Flat-belt Pulleys
Usage Method Example DrawingUse Instructions for Flat-belt Pulleys
Usage Example Drawing of Flat-belt Pulleys The workpiece can be transmitted by the combined use of pulleys for flat belts, idlers for flat belts and flat belts. The idlers for flat belts can also play the role of tensioning the belt.
Precautions
①If there are requirements for rust prevention, give priority to products with surface treatment of electroless nickel plating or those made of austenitic stainless steel.
 Please refer tosurface treatment and rust prevention methods
② The tolerance accuracy of Dimension T of the belt groove is 0.2mm. Please select the pulley model after confirming the width tolerance of the flat belt.
Example of Use
Cases of MISUMI idlers for flat belts
■ Mechanism name
2-row flat belt conveyor

■ Mechanism function
Conveyor used for pallet transportation of equipment in automatic conveying and manual operation

■ Function of pulleys for flat belts
The drive flat belt pulleys and the driven flat belt idlers drive the flat belt to carry out the conveying operation.

For detailed information, click 2-row flat belt conveyor
Application Industries
Smart Phones Medical Electronic & Electrical
MISUMI idlers for flat belts are applicable to the smart phone industry MISUMI idlers for flat belts are applicable to the medical industry MISUMI idlers for flat belts are applicable to the electronics and electrical appliances industry
Automotive Robotics Lithium battery
MISUMI idlers for flat belts are applicable to the automotive industry MISUMI idlers for flat belts are applicable to the robotics industry MISUMI idlers for flat belts are applicable to the lithium battery industry
Related Products
Flat-belt idlers, Width (T), 6 to 32 mm Flat Belts For General Use High Torque Timing Pulleys S2M Type
MISUMI Idlers for Flat Belts MISUMI Idlers for Flat Belts MISUMI High Torque Timing Pulleys S2M Type
Representative model: HBG15-6 Representative model: HBLT350-4.23 Representative model: HTPA48S2M040-B-N10
Advantages: short delivery time, multiple types Advantage: custom size Advantages: short delivery time, multiple types

Related Documents
Part Number
E-ROFAC15-[5,​6]-L[25-510/1]-H[0.3,​0.5,​0.8]
E-ROFAC20-[6,​8]-L[25-100/1]-H[0.3,​0.5,​0.8]
E-ROFAC25-[6,​8]-L[25-100/1]-H[0.3,​0.5,​0.8]
E-ROFAC30-[8,​10,​12]-L[25-100/1]-H[0.3,​0.5,​0.8]
E-ROFAC35-[10,​12,​15]-L[25-100/1]-H[0.3,​0.5,​0.8]
E-ROFAC40-[8,​10,​12,​15,​20]-L[25-100/1]-H[0.3,​0.5,​0.8]
E-ROFAC50-[10,​12,​15,​20,​25]-L[25-100/1]-H[0.3,​0.5,​0.8]
E-ROFAC60-[12,​15,​20,​25,​30]-L[25-100/1]-H[0.3,​0.5,​0.8]
E-ROFAC80-[25,​30,​35]-L[25-100/1]-H[0.3,​0.5,​0.8]
E-ROFAM30-[8,​10,​12]-L[50-100/1]-X[7-15/0.1]-Y[5-12/0.1]-Z[2-4.5/0.1]
E-ROFAM35-[10,​12,​15]-L[50-100/1]-X[7-15/0.1]-Y[5-12/0.1]-Z[4-6/0.1]
E-ROFAM40-8-L[50-100/1]-X[7-15/0.1]-Y[5-12/0.1]-Z[4-7/0.1]
E-ROFAM40-10-L[50-100/1]-X[7-15/0.1]-Y[5-12/0.1]-Z[4-7/0.1]
E-ROFAM40-20-L[50-100/1]-X[7-15/0.1]-Y[5-12/0.1]-Z[4-6/0.1]
E-ROFAM40-[12,​15]-L[50-100/1]-X[7-15/0.1]-Y[5-12/0.1]-Z[4-7/0.1]
E-ROFAM50-10-L[50-100/1]-X[7-15/0.1]-Y[5-12/0.1]-Z[4-7/0.1]
E-ROFAM50-12-L[50-100/1]-X[7-15/0.1]-Y[5-12/0.1]-Z[4-7/0.1]
E-ROFAM50-25-L[50-100/1]-X[7-15/0.1]-Y[5-12/0.1]-Z[4-7/0.1]
E-ROFAM50-[10,​12,​15,​20]-L[50-100/1]-X[7-15/0.1]-Y[5-12/0.1]-Z[4-7/0.1]
E-ROFAM60-12-L[50-100/1]-X[7-15/0.1]-Y[5-12/0.1]-Z[4-7/0.1]
E-ROFAM60-15-L[50-100/1]-X[7-15/0.1]-Y[5-12/0.1]-Z[4-7/0.1]
E-ROFAM60-[20,​25,​30]-L[50-100/1]-X[7-15/0.1]-Y[5-12/0.1]-Z[4-7/0.1]
E-ROFAM80-[25,​30,​35]-L[50-100/1]-X[7-15/0.1]-Y[5-12/0.1]-Z[4-7/0.1]
E-ROFAN15-[5,​6]-L[25-100/1]
E-ROFAN20-[6,​8]-L[25-100/1]
E-ROFAN25-[6,​8]-L[25-100/1]
E-ROFAN30-[8,​10,​12]-L[25-100/1]
E-ROFAN35-[10,​12,​15]-L[25-100/1]
E-ROFAN40-8-L[25-100/1]
E-ROFAN40-10-L[25-100/1]
E-ROFAN40-[12,​15,​20]-L[25-100/1]
E-ROFAN50-10-L[25-100/1]
E-ROFAN50-12-L[25-100/1]
E-ROFAN50-[15,​20,​25]-L[25-100/1]
E-ROFAN60-12-L[25-100/1]
E-ROFAN60-15-L[25-100/1]
E-ROFAN60-[20,​25,​30]-L[25-100/1]
E-ROFAN80-[25,​30,​35]-L[25-100/1]
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSShape With or w/o Flange Outer Dia. D
(Ø)
Shaft (Bore) Dia. d
(mm)
H
(mm)
L
(mm)
X
(mm)
Y
(mm)
Z
(mm)

-

1 Piece(s) 7 Day(s) 10CrownedNo Flange155 ~ 60.3 ~ 0.825 ~ 510---

-

1 Piece(s) 7 Day(s) 10CrownedNo Flange206 ~ 80.3 ~ 0.825 ~ 100---

-

1 Piece(s) 7 Day(s) 10CrownedNo Flange256 ~ 80.3 ~ 0.825 ~ 100---

-

1 Piece(s) 7 Day(s) 10CrownedNo Flange308 ~ 120.3 ~ 0.825 ~ 100---

-

1 Piece(s) 7 Day(s) 10CrownedNo Flange3510 ~ 150.3 ~ 0.825 ~ 100---

-

1 Piece(s) 7 Day(s) 10CrownedNo Flange408 ~ 200.3 ~ 0.825 ~ 100---

-

1 Piece(s) 7 Day(s) 10CrownedNo Flange5010 ~ 250.3 ~ 0.825 ~ 100---

-

1 Piece(s) 7 Day(s) 10CrownedNo Flange6012 ~ 300.3 ~ 0.825 ~ 100---

-

1 Piece(s) 7 Day(s) 10CrownedNo Flange8025 ~ 350.3 ~ 0.825 ~ 100---

-

1 Piece(s) 7 Day(s) 10Crosspiece GrooveNo Flange308 ~ 12-50 ~ 1007 ~ 155 ~ 122 ~ 4.5

-

1 Piece(s) 7 Day(s) 10Crosspiece GrooveNo Flange3510 ~ 15-50 ~ 1007 ~ 155 ~ 124 ~ 6

-

1 Piece(s) 7 Day(s) 10Crosspiece GrooveNo Flange408-50 ~ 1007 ~ 155 ~ 124 ~ 7

-

1 Piece(s) 7 Day(s) 10Crosspiece GrooveNo Flange4010-50 ~ 1007 ~ 155 ~ 124 ~ 7

-

1 Piece(s) 7 Day(s) 10Crosspiece GrooveNo Flange4020-50 ~ 1007 ~ 155 ~ 124 ~ 6

-

1 Piece(s) 7 Day(s) 10Crosspiece GrooveNo Flange4012 ~ 15-50 ~ 1007 ~ 155 ~ 124 ~ 7

-

1 Piece(s) 7 Day(s) 10Crosspiece GrooveNo Flange5010-50 ~ 1007 ~ 155 ~ 124 ~ 7

-

1 Piece(s) 7 Day(s) 10Crosspiece GrooveNo Flange5012-50 ~ 1007 ~ 155 ~ 124 ~ 7

-

1 Piece(s) 7 Day(s) 10Crosspiece GrooveNo Flange5025-50 ~ 1007 ~ 155 ~ 124 ~ 7

-

1 Piece(s) 7 Day(s) 10Crosspiece GrooveNo Flange5010 ~ 20-50 ~ 1007 ~ 155 ~ 124 ~ 7

-

1 Piece(s) 7 Day(s) 10Crosspiece GrooveNo Flange6012-50 ~ 1007 ~ 155 ~ 124 ~ 7

-

1 Piece(s) 7 Day(s) 10Crosspiece GrooveNo Flange6015-50 ~ 1007 ~ 155 ~ 124 ~ 7

-

1 Piece(s) 7 Day(s) 10Crosspiece GrooveNo Flange6020 ~ 30-50 ~ 1007 ~ 155 ~ 124 ~ 7

-

1 Piece(s) 9 Day(s) 10Crosspiece GrooveNo Flange8025 ~ 35-50 ~ 1007 ~ 155 ~ 124 ~ 7

-

1 Piece(s) 7 Day(s) 10StraightNo Flange155 ~ 6-25 ~ 100---

-

1 Piece(s) 7 Day(s) 10StraightNo Flange206 ~ 8-25 ~ 100---

-

1 Piece(s) 7 Day(s) 10StraightNo Flange256 ~ 8-25 ~ 100---

-

1 Piece(s) 7 Day(s) 10StraightNo Flange308 ~ 12-25 ~ 100---

-

1 Piece(s) 7 Day(s) 10StraightNo Flange3510 ~ 15-25 ~ 100---

-

1 Piece(s) 7 Day(s) 10StraightNo Flange408-25 ~ 100---

-

1 Piece(s) 7 Day(s) 10StraightNo Flange4010-25 ~ 100---

-

1 Piece(s) 7 Day(s) 10StraightNo Flange4012 ~ 20-25 ~ 100---

-

1 Piece(s) 7 Day(s) 10StraightNo Flange5010-25 ~ 100---

-

1 Piece(s) 7 Day(s) 10StraightNo Flange5012-25 ~ 100---

-

1 Piece(s) 7 Day(s) 10StraightNo Flange5015 ~ 25-25 ~ 100---

-

1 Piece(s) 7 Day(s) 10StraightNo Flange6012-25 ~ 100---

-

1 Piece(s) 7 Day(s) 10StraightNo Flange6015-25 ~ 100---

-

1 Piece(s) 7 Day(s) 10StraightNo Flange6020 ~ 30-25 ~ 100---

-

1 Piece(s) 9 Day(s) 10StraightNo Flange8025 ~ 35-25 ~ 100---

Loading...

  1. 1

Basic Information

Length L(mm) ~50 / ~100 Type Idlers (Bearing Built-in) Material Aluminum Alloy
Shaft Type 1-Bearing on Each End (2-Bearing in Total) Surface Urethane Urethane Not Provided Surface Treatment Clear Anodize

Tech Support