(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

  • Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

Spiral Bevel Gear, MGH (MGHL=12)

Spiral Bevel Gear, MGH MGHL=12

High-strength spiral miter gear, with induction hardened tooth part. Module 1.0/1.25/1.5/2.0/2.25. Hole diameter ground finish. Keyway slotted and tapped, so can be installed immediately.

(i)Caution

  • Some of the items are scheduled to be discontinued as of end of March in 2023. The manufacturer keep the items produced but they are not available with Misumi.
    There are not the replacement items and the plan to resumption of sale. Please check the quotation and order screen for details.

  • * It is sold as a single item, not as a set. Please note.

PDF

Japanese Only

Features of spiral miter gear

External appearance of spiral miter gear

External appearance of spiral miter gear

Dimensional drawing of spiral miter gear

Dimensional drawing of spiral miter gear

  • High-strength spiral miter gear with induction hardening on the teeth.
  • Module 1.0/1.25/1.5/2.0/2.25.
  • Hole diameter ground finish.
  • Due to keyway and tapping, it can be installed immediately.

Product Specifications

Product code
Catalog Number
Hole diameter
Bore
Diameter
dd (H7)
Module
Module
m
Reference circle
Diameter
Reference
Diameter
d
Tooth tip circle
Diameter
Tip
Diameter
da
Assembly
Distance
Locating
Distance
A
Hub
Outer Diameter
Hub
Diameter
dh
Hub
length
Hub
Projection
lh
Hole length
Bore
Length
l
Overall Length
Overall
Length
lw
Tip
Distance
la
Tooth width
Face
Width
b
Key
Groove
Key
Way
b2 × t2
Screw
Set Screw
Tooth tip angle
Face
Angle
δa
Weight
Weight
W (g)
Mls
MGH R+8⌀81⌀20⌀21.1220⌀1681213.4310.564.5M4450.31,16.0
MGH L+8⌀81⌀20⌀21.1220⌀1681213.4310.564.5M4450.31,16.0
MGH R+10⌀101.25⌀25⌀26.4225⌀201015.517.1313.216M4549.22,32.0
MGH L+10⌀101.25⌀25⌀26.4225⌀201015.517.1313.216M4549.22,32.0
MGH R = 12⌀121.5⌀30⌀31.8530⌀241218.520.4415.9374 × 1.8M5650.5,54.9
MGH L = 12⌀121.5⌀30⌀31.8530⌀241218.520.4415.9374 × 1.8M5650.5,54.9
MGH R = 14⌀142⌀40(⌀42.28)
⌀40.88
40⌀32162427.1621.1495 × 2.3M5848.3,137.6
MGH L = 14⌀142⌀40(⌀42.28)
⌀40.88
40⌀32162427.1621.1495 × 2.3M5848.3,137.6
MGH R = 16⌀162.25⌀45(⌀47.73)
⌀46.03
45⌀361827.530.3923.86105 × 2.3M6949.22,195.6
MGH L = 16⌀162.25⌀45(⌀47.73)
⌀46.03
45⌀361827.530.3923.86105 × 2.3M6949.22,195.6

The diameter of the tooth tip da in parenthesis () is the theoretical value. The maximum outer diameter is chamfered parallel to the axis, so it is smaller than the theoretical value.
Features of MGH series

  • Tooth part induction hardened (HRC47 to 53)
  • Holes grinding finished
  • With key material and set screw.

It can be used in principle (without alteration).

Allowable transmission power table (bending strength: kW) / Allowable transmission power table (Flank strength: kW)

Product code Catalog NumbersRotational speed (min^-1)
revolution/min
3006009001,2001, 5001,8002,000
MGH R + 80.0300.0610.0910.1180.1420.1640.179
MGH R + 100.0620.1250.1840.2340.2800.3220.348
MGH R = 120.1070.2150.2970.3870.4600.5250.568
MGH R = 140.2510.4880.6800.8470.9981.1501.245
MGH R = 160.3570.6790.9401.1631.3761.5831.710
Rotational speed (min^-1)
revolution/min
3006009001,2001, 5001,8002,000
0.0120.0260.0400.0520.0630.0740.081
0.0260.0540.0810.1040.1260.1460.158
0.0450.0930.1360.1740.2080.2400.261
0.1080.2160.3070.3870.4600.5350.581
0.1540.3030.4270.5350.6410.7410.804
Part Number
MGHL=12
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSModule Shaft Bore Config. Tooth Width B
(mm)
Shaft Bore Dia. d
(Ø)
Bending direction Screw Keyway (width × depth) Pilot Hole Product, Completed Product Hub length lh

SGD 23.63

1 Piece(s) 6 Day(s) 101.5Keyway712Left--Finished product12

Loading...

  1. 1

Basic Information

Shape Spiral Miter Gear Number of Teeth(Teeth) 20 Gear Ratio 1
Material Steel Heat Treatment High frequency Ground Tooth No
Surface Treatment No Accuracy(* New JIS) Class 4 Shaft Bore Tolerance H7
Bending angle(deg) 35 Material (Details) S45C

Please check the type/dimensions/specifications of the part MGHL=12 in the Spiral Bevel Gear, MGH series.

Similar Part Numbers

Part Number
MGHL+10
MGHL+8
MGHLEQUAL14
MGHR+10
MGHR+8
MGHREQUAL14
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSModule Shaft Bore Config. Tooth Width B
(mm)
Shaft Bore Dia. d
(Ø)
Bending direction Screw Keyway (width × depth) Pilot Hole Product, Completed Product Hub length lh

SGD 19.41

1 Piece(s) 7 Day(s) or more 101.25Round hole+tap610LeftM4NoFinished product (shaft hole grinding finish)10

SGD 17.69

1 Piece(s) 6 Day(s) or more 101Round hole+tap4.58LeftM4NoFinished product (shaft hole grinding finish)8

SGD 29.73

1 Piece(s) 33 Day(s) or more 102Keyway914Left--Finished product14

SGD 19.41

1 Piece(s) 7 Day(s) or more 101.25Round hole+tap610RightM4NoFinished product (shaft hole grinding finish)10

SGD 17.69

1 Piece(s) 6 Day(s) or more 101Round hole+tap4.58RightM4NoFinished product (shaft hole grinding finish)8

SGD 29.73

1 Piece(s) 12 Day(s) or more 102Keyway914Right--Finished product14

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)