(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
- Please be informed of our operating hours during the Hari Raya Puasa Holidays. Click here for details.
General Piping Straight Soft Nylon Tube (NB0860-100-R-L5)
A tube that is robust against bending fatigue for a long, stable service life.
[Features]
·It has excellent pressure resistance, can be used at high pressure, and can also be used for hot water and heat medium oil
·Cut marks are displayed at intervals of approx. 500 mm, which is convenient when cutting tubes
·Has excellent pressure resistance, abrasion resistance, and cold resistance, is resistant to bending fatigue, and can be used stably for a long time
[Application]
·Ideal for mold cooling water piping as a hot water resistant tube
(i)Caution
- The product images are representative only. Specifications may differ for each part number, including shape and color.
Japanese Only
Part Number
Configured Part Number is shown.
NB0860-100-R-L5
- Download
Product Details - CAD Data unavailable
-
- Order Qty.
-
- Unit Price
- ---
-
- Total
- ---
-
- Ship Date
- ---
Configured Specifications
| Outer Dia. D(Ø) | 8 | Inner Dia. d(Ø) | 6 |
|---|---|---|---|
| Material | Nylon | Applicable Fluid | Water / Air / Heat-transfer Oil |
| Color | Red | Type | Straight |
| Operating Environment | Standard / Mold cooling / Water Resistance / Pressure Resistance / Abrasion Resistance | Outer Diameter [Category] | Up to 8 |
| Cutting Service Availability | Presence | Material: Nylon | Soft Nylon |
| I.D. [Category] | ~6 | Number of Core(Core) | 1 |
| Show More | |||
| Min. Bend Radius(mm) | 25 | Operating Temperature Range (when using air)(°C) | -15～ 90 |
| Operating Pressure Range (when using air)(MPa) | 0～1.0 | Length M(m) | 5 |
| Ordering Code | - | Operating Vacuum Level(kPa) | -100 |
| Show Less | |||
Specifications Of Straight Soft Nylon Tube For General Piping
Usable fluids: air, water (see conditions *1, *2), heat transfer oil (see condition *3)
Maximum operating pressure (at 20°C 65% RH): 1.0 MPa *4
Operating vacuum pressure: -100 kPa
Operating temperature range: -15 to +90°C (no freezing)
Tube color: 12 colors
(Warning)
- *1. When using water or heat transfer oil, make sure the surge pressure stays below the maximum operating pressure.
- *2. Tap water of the standard equivalent to the water supply in Japan can be used. Please inquire if you want to use other kinds of water.
- *3. Be sure to use an insert ring when connecting to a one-touch fitting and using water or heat transfer oil.
- *4. The maximum operating pressure is the value at 20°C 65% RH. When using the product at other temperatures, maintain a sufficient margin of safety from the burst pressure curve.
Compatible Sizes
| Format | Tube Outer Diameter (φmm) | Tube Internal Diameter (φmm) | Standard Overall Length (m) | Minimum Bending Radius (mm) | Minimum Mounting Radius (mm) | Weight (g/m) | Tube Color (*2) | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| B | R | O | YB | Y | G | BU | CB | W | BR | YG | P | |||||||
| NB 0425-(3)-(4) | 4 | 2.5 | 20/100 | 9 | 14 | 9 | ○ | ○ | △ | △ | ○ | △ | ○ | ○ | ○ | △ | △ | △ |
| NB 0640-(3)-(4) | 6 | 4 | 20/100 | 14 | 21 | 17 | ○ | ○ | △ | △ | ○ | △ | ○ | ○ | ○ | △ | △ | △ |
| NB 0860-(3)-(4) | 8 | 6 | 20/100 | 25 | 40 | 23 | ○ | ○ | △ | △ | ○ | △ | ○ | ○ | ○ | △ | △ | △ |
| NB 1075-(3)-(4) | 10 | 7.5 | 20/100 | 30 | 46 | 36 | ○ | ○ | △ | △ | ○ | △ | ○ | ○ | ○ | △ | △ | △ |
| NB 1290-(3)-(4) | 12 | 9 | 20/100 | 34 | 54 | 52 | ○ | ○ | △ | △ | ○ | △ | ○ | ○ | ○ | △ | △ | △ |
| NB 1613-20-(4) | 16 | 13 | 20 | 80 | 94 | 69 | ○ | △ | △ | △ | △ | △ | ○ | △ | ○ | △ | △ | △ |
(Tube color)
B: black, R: red, O: orange, YB: yellow-brown, Y: yellow, G: green, BU: blue, CB: clear blue, W: milk white,
BR: brown, YG: yellow-green, P: pink
Tube Performance
Burst pressure curve (reference value)
Effective cross-sectional area of piping
Tube internal diameterφ2 to 3 (diameter 2 to 3 mm)
- *See the manufacturer's catalog for precautions and other important notes.
| Part Number |
|---|
| NB0860-100-R-L5 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Outer Dia. D (Ø) | Inner Dia. d (Ø) | Color | Outer Diameter [Category] | Cutting Service Availability | I.D. [Category] | Min. Bend Radius (mm) | Operating Temperature Range (when using air) (°C) | Length M (m) | Ordering Code |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SGD 23.21 | 1 Piece(s) | 4 Day(s) or more | 8 | 6 | Red | Up to 8 | Presence | ~6 | 25 | -15～ 90 | 5 | - |
| Part Number |
|---|
Basic Information
| Material | Nylon | Applicable Fluid | Water / Air / Heat-transfer Oil | Type | Straight |
|---|---|---|---|---|---|
| Operating Environment | Standard / Mold cooling / Water Resistance / Pressure Resistance / Abrasion Resistance | Material: Nylon | Soft Nylon | Number of Core(Core) | 1 |
| Operating Pressure Range (when using air)(MPa) | 0::1.0 | Operating Vacuum Level(kPa) | -100 |
Please check the type/dimensions/specifications of the part NB0860-100-R-L5 in the General Piping Straight Soft Nylon Tube series.
Specification/Dimensions
-
Ordering Code
-
type
- NB
-
Outer Dia. D(Ø)
-
Inner Dia. d(Ø)
-
Color
- Black
- Translucent White
- Transparent (including colored)
- Red
- Blue
- Yellow
-
Outer Diameter [Category]
-
Cutting Service Availability
- Presence
- No
-
I.D. [Category]
-
Length M(m)
Days to Ship
-
- All
- Same day
- 4 Day(s) or Less
- 8 Day(s) or Less
- 11 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Similar Part Numbers
| Part Number |
|---|
| NB0425-100-B-L2 |
| NB0425-100-B-L20 |
| NB0425-100-B-L3 |
| NB0860-100-R-L50 |
| NB0860-100-R-L6 |
| NB0860-100-R-L7 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Outer Dia. D (Ø) | Inner Dia. d (Ø) | Color | Outer Diameter [Category] | Cutting Service Availability | I.D. [Category] | Min. Bend Radius (mm) | Operating Temperature Range (when using air) (°C) | Length M (m) | Ordering Code |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SGD 10.20 | 1 Piece(s) | 4 Day(s) or more | 4 | 2.5 | Black | Up to 4 | Presence | ~3 | 9 | -15～ 90 | 2 | - | ||
SGD 36.92 | 1 Piece(s) | 4 Day(s) or more | 4 | 2.5 | Black | Up to 4 | Presence | ~3 | 9 | -15～ 90 | 20 | - | ||
SGD 10.94 | 1 Piece(s) | 4 Day(s) or more | 4 | 2.5 | Black | Up to 4 | Presence | ~3 | 9 | -15～ 90 | 3 | - | ||
SGD 134.83 | 1 Piece(s) | 4 Day(s) or more | 8 | 6 | Red | Up to 8 | Presence | ~6 | 25 | -15～ 90 | 50 | - | ||
SGD 25.79 | 1 Piece(s) | 4 Day(s) or more | 8 | 6 | Red | Up to 8 | Presence | ~6 | 25 | -15～ 90 | 6 | - | ||
SGD 32.24 | 1 Piece(s) | 4 Day(s) or more | 8 | 6 | Red | Up to 8 | Presence | ~6 | 25 | -15～ 90 | 7 | - |
| Part Number |
|---|
Similar Product
Complementary Products
-
General Piping Straight Nylon Tube
PISCO
From： SGD 2.19
Same day or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(65) 6733 7211 / FAX：(65) 6733 0211
- 9:00am - 6:00pm (Monday - Friday)
- Technical Inquiry
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
Not a MISUMI customer yet? Register & enjoy 50% off your order!* (*T&C apply.)
We also deliver to:Philippines, Australia, New Zealand, Middle East region!
How can we improve?
How can we improve?