(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (SGT) 25/11/2024. We apologize for the inconvenience.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Lateral Load Resisting Low-Friction Cylinder MQM Series (MQMLB16-8D)
An air cylinder suitable for all driving ranges, from low pressure, low speed, uniform speed and low friction to high pressure, high speed and high-speed response (high frequency).
[Features]
· Covers a range of driving speeds and output controls not possible with standard cylinders thanks to its metal seal structure with minimal sliding resistance.
· Minimal sliding resistance allows low-pressure actuation at 0.005 MPa.
· Low- and uniform-speed actuation. Smooth, uniform-speed actuation ranges as low as 0.3 mm/s.
· Low sliding resistance allows output control in approx. 0.05 N increments. (Based on cylinder piston area × pressure accuracy)
· No increased sliding resistance after not operating for a long period of time.
· Long lifespan: Long service life of 10,000 km or 100 million full cycles.
· Lateral load resistance increased by built-in ball bushing.
(i)Caution
- See catalog for specification details.
- CAD data is not supported for some model numbers
- Product pictures are representations.
Part Number
Configured Part Number is shown.
MQMLB16-8D
Lateral Load Resisting Low Friction Cylinder MQM Series Specifications
Lateral Load Resisting Low Friction Cylinder MQM Series external appearance
Symbol Double acting: single rod
Specifications
| Tube Internal Diameter (mm) | 6 | 10 | 16 | 20 | 25 | |
|---|---|---|---|---|---|---|
| Seal construction | Metal seal | |||||
| Operating method | Double acting, single rod | |||||
| Applicable fluids | Air | |||||
| Proof pressure | 1.05 MPa | |||||
| Maximum operating pressure | 0.7 MPa | |||||
| Minimum operating pressureNote 1) | Standard type | 0.02 MPa | 0.005 MPa | |||
| H (high speed / high frequency type) | - | 0.01 MPa | ||||
| Ambient temperature and working fluid temperature | -10 to 80°C | |||||
| Cushioning | Rubber bumper (Standard) | |||||
| LubricationNote 2) | Not required (non-lube) | |||||
| Stroke length tolerance | +1.0 0 | |||||
| Operating piston speed Note 3) | Standard type | 0.5 mm/s to 1,000 mm/s | ||||
| H (high speed / high frequency type) | - | 5 mm/s to 3,000 mm/s | ||||
| Total leakageNote 4) | Supply pressure 0.1 MPa | 150 cm3/min | 250 cm3/min | 300 cm3/min | ||
| Supply pressure 0.3 MPa | 800 cm3/min | 1,000 cm3/min | 1,200 cm3/min | |||
| Supply pressure 0.5 MPa | 1,500 cm3/min | 2,500 cm3/min | 3,000 cm3/min | |||
Note 1) Value when horizontal. (Use clean, dry and nonfreezing air) However, as the stroke increases, it will likely be affected by the mass of its moving parts and the pressure will likely increase by 0.003 to 0.005 MPa due to an offset load from the mass of the rod.
Note 2) Please refer to the manufacturer's catalog regarding lubrication. This product uses turbine oil (standard type) or lithium soap based grease (high speed / high frequency type) as an initial lubricant. Lubricant may seep out of the rod or the piping port.
Note 3) Control low speed actuation with differential pressure and a speed controller, etc. (Refer to the recommended circuit example in the manufacturer's catalog for details.)
Note 4) The values are only for reference and are not guaranteed.
Structural drawing
MQM Series structural drawing
Component Parts
| Number | Part name | Material | Note |
|---|---|---|---|
| 1 | Rod | Carbon steel | Hard chrome plated |
| 2 | Piston | Special stainless steel | - |
| 3 | Tube | Special stainless steel | - |
| 4 | Head cover | Aluminum Alloy | Hard Anodize |
| 5 | Rod Cover | Aluminum Alloy | Hard Anodize |
| 6 | Sleeve | Special stainless steel | - |
| 7 | Seat | NBR | - |
| 8 | Bumper A | Polyurethane | - |
| 9 | Bumper B | Polyurethane | - |
| 10 | Bumper C | Polyurethane | - |
| 11 | Nut | Aluminum Alloy | - |
| 12 | Ball bushing | - | - |
| 13 | O-ring | NBR | - |
| 14 | Retaining Ring | Carbon tool steel | Phosphate coated |
| 15 | Rod-end nut | Carbon steel | Chromate |
| 16 | Mounting nut | Brass / carbon steelNote) | - |
Note) Bore size: 6 mm, 10 mm, 16 mm is brass
Bore size: 20 mm, 25 mm is carbon steel
Outline dimensional drawing
Basic type: MQMLB
Bore size 6 mm dimensional drawing
Bore size 10 mm, 16 mm, 20 mm, 25 mm dimensional drawing
(Unit: mm)
| Bore size (mm) | A | D | F | G1 | G2 | H | I | J | MM | N1 | N2 | NA | NN | P | S | ZZ | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| - | TN | TF | ||||||||||||||||
| 10 | 15 | 4 | 8 | 15 | 6 | 28 | 18.5 | 16 | M4 × 0.7 | 11 | 20 | 16 | M12 × 1 | M5 × 0.8 | - | - | 65 | 101 |
| 16 | 15 | 5 | 10 | 15 | 6 | 30 | 22 | 22 | M5 × 0.8 | 12 | 21 | 19.5 | M14 × 1 | M5 × 0.8 | - | - | 74 | 114 |
| 20 | 18 | 8 | 13 | 25 | 8.5 | 40.5 | 31.5 | 28.5 | M8 × 1.25 | 20.5 | 33 | 29 | M20 × 1.5 | Rc 1/8 | NPT 1/8 | G 1/8 | 97.5 | 151 |
| 25 | 18 | 10 | 13 | 30 | 8.5 | 44.5 | 34.5 | 32 | M10 × 1.25 | 20.5 | 38 | 32 | M26 × 1.5 | Rc 1/8 | NPT 1/8 | G 1/8 | 102.5 | 160 |
*See the manufacturer's catalog regarding the rod-end nut and mounting nut.
Foot type: MQMLL
Bore size 6 mm dimensional drawing
Bore size 10 mm, 16 mm, 20 mm, 25 mm dimensional drawing
(Unit: mm)
| Bore size (mm) | LC | LH | LS | LT | LX | LY | LZ | S | X | Y | Z | ZZ |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 10 | 5.5 | 14 | 83 | 2.3 | 33 | 25 | 42 | 65 | 6 | 9 | 19 | 108 |
| 16 | 5.5 | 18 | 92 | 2.3 | 42 | 30 | 54 | 74 | 6 | 9 | 21 | 119 |
| 20 | 6.8 | 25 | 137.5 | 3.2 | 40 | 40 | 55 | 97.5 | 8 | 20 | 20.5 | 166 |
| 25 | 6.8 | 28 | 142.5 | 3.2 | 40 | 47 | 55 | 102.5 | 8 | 20 | 24.5 | 175 |
- *See the manufacturer's catalog for other specifications, dimensions, included fitting dimensions, etc.
| Part Number |
|---|
| MQMLB16-8D |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Cylinder (Tube) Inner Diameter (Ø) | Stroke (mm) | Operating Pressure (MPa) | Specifications | Port thread type | Type of Mount Support | Sealing materials |
|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | Quote | 16 | 8 | 0.005 to 0.7 | Function: Standard type | M Screw | Basic type | Metal seal |
Loading...
Basic Information
| Cylinder Operation Method | Double Acting | Rod Operation Method | Single Rods | Main Body Shape | Standard |
|---|---|---|---|---|---|
| Additional Function | Standard | Environment, Applications | Standard / Low Friction (Internal Resistance) / Low Speed | Cushion | Rubber bumper (Standard) |
| Tube Material | Special stainless steel | Specification of cylinder | Lateral load resisting low friction cylinder | Type | Lateral load resisting type (Built-in ball bushing) |
Please check the type/dimensions/specifications of the part MQMLB16-8D in the Lateral Load Resisting Low-Friction Cylinder MQM Series series.
Specification/Dimensions
-
type
- MQML
-
Cylinder (Tube) Inner Diameter(Ø)
-
Stroke(mm)
-
Operating Pressure(MPa)
-
Specifications
- Function: Standard type
- Function: high speed / high frequency type (without fixed throttle)
-
Port thread type
- G
- M Screw
- NPT
- Rc
-
Type of Mount Support
- Basic type
- Foot
- Head-end flange
- Rod-end flange type
- Single clevis type (mounting type)
- U-Shaped Clevis Type
-
Sealing materials
- Metal seal
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 32 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Similar Part Numbers
| Part Number |
|---|
| MQMLB10-15D |
| MQMLB10-16D |
| MQMLB10-20D |
| MQMLB16-90D |
| MQMLB16-95D |
| MQMLB16H-10D |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Cylinder (Tube) Inner Diameter (Ø) | Stroke (mm) | Operating Pressure (MPa) | Specifications | Port thread type | Type of Mount Support | Sealing materials |
|---|---|---|---|---|---|---|---|---|---|---|---|
SGD 328.53 | 1 Piece(s) | 32 Day(s) | 10 | 15 | 0.005 to 0.7 | Function: Standard type | M Screw | Basic type | Metal seal | ||
- | 1 Piece(s) | Quote | 10 | 16 | 0.005 to 0.7 | Function: Standard type | M Screw | Basic type | Metal seal | ||
- | 1 Piece(s) | Quote | 10 | 20 | 0.005 to 0.7 | Function: Standard type | M Screw | Basic type | Metal seal | ||
- | 1 Piece(s) | Quote | 16 | 90 | 0.005 to 0.7 | Function: Standard type | M Screw | Basic type | Metal seal | ||
- | 1 Piece(s) | Quote | 16 | 95 | 0.005 to 0.7 | Function: Standard type | M Screw | Basic type | Metal seal | ||
- | 1 Piece(s) | Quote | 16 | 10 | 0.005 to 0.7 | Function: high speed / high frequency type (without fixed throttle) | M Screw | Basic type | Metal seal |
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(65) 6733 7211 / FAX：(65) 6733 0211
- 9:00am - 6:00pm (Monday - Friday)
- Technical Inquiry
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?