(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

  • Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

Lateral Load Resisting Low-Friction Cylinder MQM Series (MQMLL10H-100D)

Lateral Load Resisting Low-Friction Cylinder MQM Series MQMLL10H-100D

An air cylinder suitable for all driving ranges, from low pressure, low speed, uniform speed and low friction to high pressure, high speed and high-speed response (high frequency).
[Features]
· Covers a range of driving speeds and output controls not possible with standard cylinders thanks to its metal seal structure with minimal sliding resistance.
· Minimal sliding resistance allows low-pressure actuation at 0.005 MPa.
· Low- and uniform-speed actuation. Smooth, uniform-speed actuation ranges as low as 0.3 mm/s.
· Low sliding resistance allows output control in approx. 0.05 N increments. (Based on cylinder piston area × pressure accuracy)
· No increased sliding resistance after not operating for a long period of time.
· Long lifespan: Long service life of 10,000 km or 100 million full cycles.
· Lateral load resistance increased by built-in ball bushing.

(i)Caution

  • See catalog for specification details.
  • CAD data is not supported for some model numbers
  • Product pictures are representations.

PDF

Part Number

Configured Part Number is shown.

MQMLL10H-100D

Lateral Load Resisting Low Friction Cylinder MQM Series Specifications

Lateral Load Resisting Low Friction Cylinder MQM Series external appearance

Lateral Load Resisting Low Friction Cylinder MQM Series external appearance

Symbol Double acting: single rod

Symbol Double acting: single rod

Specifications

Tube Internal Diameter (mm)610162025
Seal constructionMetal seal
Operating methodDouble acting, single rod
Applicable fluidsAir
Proof pressure1.05 MPa
Maximum operating pressure0.7 MPa
Minimum operating pressureNote 1)Standard type0.02 MPa0.005 MPa
H (high speed / high frequency type)-0.01 MPa
Ambient temperature and working fluid temperature-10 to 80°C
CushioningRubber bumper (Standard)
LubricationNote 2)Not required (non-lube)
Stroke length tolerance+1.0
0
Operating piston speed Note 3)Standard type0.5 mm/s to 1,000 mm/s
H (high speed / high frequency type)-5 mm/s to 3,000 mm/s
Total leakageNote 4)Supply pressure 0.1 MPa150 cm3/min250 cm3/min300 cm3/min
Supply pressure 0.3 MPa800 cm3/min1,000 cm3/min1,200 cm3/min
Supply pressure 0.5 MPa1,500 cm3/min2,500 cm3/min3,000 cm3/min

Note 1) Value when horizontal. (Use clean, dry and nonfreezing air) However, as the stroke increases, it will likely be affected by the mass of its moving parts and the pressure will likely increase by 0.003 to 0.005 MPa due to an offset load from the mass of the rod.
Note 2) Please refer to the manufacturer's catalog regarding lubrication. This product uses turbine oil (standard type) or lithium soap based grease (high speed / high frequency type) as an initial lubricant. Lubricant may seep out of the rod or the piping port.
Note 3) Control low speed actuation with differential pressure and a speed controller, etc. (Refer to the recommended circuit example in the manufacturer's catalog for details.)
Note 4) The values are only for reference and are not guaranteed.

Structural drawing

MQM Series structural drawing

MQM Series structural drawing

Component Parts

NumberPart nameMaterialNote
1RodCarbon steelHard chrome plated
2PistonSpecial stainless steel-
3TubeSpecial stainless steel-
4Head coverAluminum AlloyHard Anodize
5Rod CoverAluminum AlloyHard Anodize
6SleeveSpecial stainless steel-
7SeatNBR-
8Bumper APolyurethane-
9Bumper BPolyurethane-
10Bumper CPolyurethane-
11NutAluminum Alloy-
12Ball bushing--
13O-ringNBR-
14Retaining RingCarbon tool steelPhosphate coated
15Rod-end nutCarbon steelChromate
16Mounting nutBrass / carbon steelNote)-

Note) Bore size: 6 mm, 10 mm, 16 mm is brass
Bore size: 20 mm, 25 mm is carbon steel

Outline dimensional drawing

Basic type: MQMLB

Bore size 6 mm dimensional drawing

Bore size 6 mm dimensional drawing

Bore size 10 mm, 16 mm, 20 mm, 25 mm dimensional drawing

Bore size 10 mm, 16 mm, 20 mm, 25 mm dimensional drawing

 

(Unit: mm)

 

Bore size
(mm)
ADFG1G2HIJMMN1N2NANNPSZZ
-TNTF
1015481562818.516M4 × 0.7112016M12 × 1M5 × 0.8--65101
1615510156302222M5 × 0.8122119.5M14 × 1M5 × 0.8--74114
2018813258.540.531.528.5M8 × 1.2520.53329M20 × 1.5Rc 1/8NPT 1/8G 1/897.5151
25181013308.544.534.532M10 × 1.2520.53832M26 × 1.5Rc 1/8NPT 1/8G 1/8102.5160

*See the manufacturer's catalog regarding the rod-end nut and mounting nut.

Foot type: MQMLL

Bore size 6 mm dimensional drawing

Bore size 6 mm dimensional drawing

Bore size 10 mm, 16 mm, 20 mm, 25 mm dimensional drawing

Bore size 10 mm, 16 mm, 20 mm, 25 mm dimensional drawing

 

(Unit: mm)

 

Bore size
(mm)
LCLHLSLTLXLYLZSXYZZZ
105.514832.3332542656919108
165.518922.3423054746921119
206.825137.53.240405597.582020.5166
256.828142.53.2404755102.582024.5175
  • *See the manufacturer's catalog for other specifications, dimensions, included fitting dimensions, etc.
Part Number
MQMLL10H-100D
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipCylinder (Tube) Inner Diameter
(Ø)
Stroke
(mm)
Operating Pressure
(MPa)
Specifications Port thread type Type of Mount Support Sealing materials

SGD 398.65

1 Piece(s) 32 Day(s) 101000.005 to 0.7Function: high speed / high frequency type (without fixed throttle)M ScrewFootMetal seal

Loading...

  1. 1

Basic Information

Cylinder Operation Method Double Acting Rod Operation Method Single Rods Main Body Shape Standard
Additional Function Standard Environment, Applications Standard / Low Friction (Internal Resistance) / Low Speed Cushion Rubber bumper (Standard)
Tube Material Special stainless steel Specification of cylinder Lateral load resisting low friction cylinder Type Lateral load resisting type (Built-in ball bushing)

Please check the type/dimensions/specifications of the part MQMLL10H-100D in the Lateral Load Resisting Low-Friction Cylinder MQM Series series.

Similar Part Numbers

Part Number
MQMLB10-15D
MQMLB10-16D
MQMLB10-20D
MQMLL10H-10D
MQMLL10H-15D
MQMLL10H-20D
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipCylinder (Tube) Inner Diameter
(Ø)
Stroke
(mm)
Operating Pressure
(MPa)
Specifications Port thread type Type of Mount Support Sealing materials

SGD 328.53

1 Piece(s) 32 Day(s) 10150.005 to 0.7Function: Standard typeM ScrewBasic typeMetal seal

-

1 Piece(s) Quote 10160.005 to 0.7Function: Standard typeM ScrewBasic typeMetal seal

-

1 Piece(s) Quote 10200.005 to 0.7Function: Standard typeM ScrewBasic typeMetal seal

-

1 Piece(s) Quote 10100.005 to 0.7Function: high speed / high frequency type (without fixed throttle)M ScrewFootMetal seal

SGD 360.38

1 Piece(s) 32 Day(s) 10150.005 to 0.7Function: high speed / high frequency type (without fixed throttle)M ScrewFootMetal seal

-

1 Piece(s) Quote 10200.005 to 0.7Function: high speed / high frequency type (without fixed throttle)M ScrewFootMetal seal

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)