(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Nylon Tubing T/TIA Series (Part Numbers)
- On Sale Till 31/03/2025
Nylon tubing for general pneumatic tubing.
[Features]
・ Maximum operating pressure of 3.0 MPa or less (T0604, at 20°C)
[Applications]
・ Applicable fluids: Air, water
(i)Caution
- The maximum operating pressure values listed are at 20°C or less. See the catalog for details.
- For specifications and details, please refer to the catalog.
- Product pictures are representations.
Specifications of Nylon Tubing T/TIA Series
Appearance of Nylon Tubing T/TIA Series
Maximum operating pressure
| - | Tubing Size | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Metric size (T series) | Inch size (TIA series) | ||||||||||||
| Nominal | T0425 | T0403 | T0604 | T0645 | T0806 | T1075 | T1209 | T1613 | TIA01 | TIA05 | TIA07 | TIA11 | TIA13 |
| Outer diameter (mm) | 4 | 4 | 6 | 6 | 8 | 10 | 12 | 16 | 3.18 | 4.76 | 6.35 | 9.53 | 12.7 |
| Inner diameter (mm) | 2.5 | 3 | 4 | 4.5 | 6 | 7.5 | 9 | 13 | 2.18 | 3.48 | 4.57 | 6.99 | 9.56 |
List Of Colors
- Black (B)
- White (W)
- Red (R)
- Blue (BU)
- Yellow (Y)
- Green (G)
Specifications
| Fluid | Air, water | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Maximum operating pressureNote 1)MPa | 20°C or less | 3.3 | 2.0 | 3.0 | 2.0 | 2.0 | 2.0 | 2.0 | 1.6 | 2.3 | 2.3 | 2.3 | 2.3 | 2.3 |
| 40°C | 2.3 | 1.4 | 2.1 | 1.4 | 1.4 | 1.4 | 1.4 | 1.1 | 1.6 | 1.6 | 1.6 | 1.6 | 1.6 | |
| 60°C | 1.65 | 1.0 | 1.5 | 1.0 | 1.0 | 1.0 | 1.0 | 0.8 | 1.15 | 1.15 | 1.15 | 1.15 | 1.15 | |
| 80°C | 1.35 | 0.8 | 1.25 | 0.8 | 0.8 | 0.8 | 0.8 | 0.65 | 0.95 | 0.95 | 0.95 | 0.95 | 0.95 | |
| 100°C | 1.2 | 0.75 | 1.1 | 0.75 | 0.75 | 0.75 | 0.75 | 0.6 | 0.85 | 0.85 | 0.85 | 0.85 | 1.85 | |
| Applicable fittingsNote 1) Note 2) | One-touch fittings, insert fittings, self-align fittings, miniature fittings | |||||||||||||
| Minimum bending radius mmNote 3) | Minimum bending radius | 13 | 20 | 24 | 30 | 40 | 50 | 60 | 100 | 15 | 25 | 30 | 50 | 65 |
| Tube close bend radius (reference value) | 10 | 15 | 18 | 23 | 30 | 40 | 45 | 75 | 12 | 20 | 23 | 40 | 48 | |
| Operating temperatureNote 1) | -40 to +100°C, Water: 0 to +70℃ (No freezing) | |||||||||||||
| Material | Nylon 12 | |||||||||||||
Note 1) Be sure to operate under the maximum operating pressure and maximum operating temperature conditions using the lower maximum operating specification of either the tubing or fittings.
Note 2) Mount an inner sleeve when using metal one-touch fittings in high-temperature environments of 60°C or more.
Use self-align fittings at a temperature of 60°C or less.
Note 3) The minimum bending radius is the representative value measured as shown in the figure on the left ("How to measure the minimum bending radius").
- Use a tube above the recommended minimum bending radius.
- The tubing may be bent if used under the recommended minimum bending radius. Therefore, refer to the refraction value and make sure that the tubing is not bent or flattened.
- The tube close bend radius is not guaranteed. The value of 2R is a representative value measured with a bent or flattened tube using the method shown in the figure on the left.
How to measure the minimum bending radius
How to measure the minimum bending radius
Bend the tubing into a U shape at a temperature of 20°C. Fix one end and close the loop gradually. Measure 2R when the deformed ratio of the tubing diameter at bending reaches 10%.
Made-To-Order Specifications
- 100‑m reel: Metric size and inch size, except for ø16 (diameter 16 mm). Suffix "-X3" to the end of part number.
- Longer length reel: Metric size. Suffix "-X3" to the end of part number.
- 20‑m roll: Inch size. Suffix "-X4" to the end of part number.
* Please contact SMC for specifications in detail, dimensions, delivery and specifications other than those mentioned above.
Caution
- 1. Applicable for general industrial water. Please consult with SMC if using other kinds of fluid. Also, the surge pressure must not exceed the maximum operating pressure. If the surge pressure exceeds the maximum operating pressure, it will result in damage to fittings and tubes.
- 2. Please exercise caution when using this item in a clean room. There is a possibility of plasticizers and other materials precipitating on the tube surface and detracting from the cleanliness level of the room.
* See the manufacturer's catalog for safety information.
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Outer Dia. D (Ø) | O.D. [Distinction] | Inner Dia. d (Ø) | I.D. [Distinction] | Color | Minimum Bending Radius (mm) | Bundle winding length (m) | Reel winding length (m) | Applicable Tube Size | Specifications | Maximum operating pressure (MPa) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SGD 34.07 | 1 Piece(s) | 32 Day(s) | 4 | ~4 | 2.5 | ~3 | [Red] Red (opaque) | 13 | 20 | - | Metric Size | Standard Product | 3.3 | ||
SGD 162.87 | 1 Piece(s) | 32 Day(s) | 4 | ~4 | 2.5 | ~3 | [Red] Red (opaque) | 13 | - | 100 | Metric Size | Made-to-Order Product | 3.3 | ||
SGD 814.33 | 1 Piece(s) | 32 Day(s) | 4 | ~4 | 2.5 | ~3 | [Red] Red (opaque) | 13 | - | 500 | Metric Size | Made-to-Order Product | 3.3 | ||
SGD 55.30 | 1 Piece(s) | 32 Day(s) | 6 | ~6 | 4 | ~4 | [Red] Red (opaque) | - | 20 | - | Metric Size | Standard Product | 3.0 | ||
SGD 261.57 | 1 Piece(s) | 32 Day(s) | 6 | ~6 | 4 | ~4 | [Red] Red (opaque) | - | - | 100 | Metric Size | Made-to-Order Product | 3.0 | ||
SGD 1,308.07 | 1 Piece(s) | 32 Day(s) | 6 | ~6 | 4 | ~4 | [Red] Red (opaque) | - | - | 500 | Metric Size | Made-to-Order Product | 3.0 | ||
SGD 76.53 | 1 Piece(s) | 32 Day(s) | 8 | ~8 | 6 | ~6 | [Red] Red (opaque) | 40 | 20 | - | Metric Size | Standard Product | 2 | ||
SGD 363.53 | 1 Piece(s) | 32 Day(s) | 8 | ~8 | 6 | ~6 | [Red] Red (opaque) | 40 | - | 100 | Metric Size | Made-to-Order Product | 2 | ||
SGD 726.93 | 1 Piece(s) | 32 Day(s) | 8 | ~8 | 6 | ~6 | [Red] Red (opaque) | 40 | - | 200 | Metric Size | Made-to-Order Product | 2 | ||
SGD 117.48 | 1 Piece(s) | 32 Day(s) | 10 | ~10 | 7.5 | ~8 | [Red] Red (opaque) | 50 | 20 | - | Metric Size | Standard Product | 2 | ||
SGD 557.20 | 1 Piece(s) | 32 Day(s) | 10 | ~10 | 7.5 | ~8 | [Red] Red (opaque) | 50 | - | 100 | Metric Size | Made-to-Order Product | 2 | ||
- | 1 Piece(s) | Quote | 10 | ~10 | 7.5 | ~8 | [Red] Red (opaque) | 50 | - | 150 | Metric Size | Made-to-Order Product | 2 | ||
SGD 159.25 | 1 Piece(s) | 32 Day(s) | 12 | ~15 | 9 | ~9 | [Red] Red (opaque) | 60 | 20 | - | Metric Size | Standard Product | 2 | ||
SGD 758.22 | 1 Piece(s) | 32 Day(s) | 12 | ~15 | 9 | ~9 | [Red] Red (opaque) | 60 | - | 100 | Metric Size | Made-to-Order Product | 2 | ||
SGD 34.77 | 1 Piece(s) | 32 Day(s) | 3.18 | ~4 | - | ~3 | [Red] Red (opaque) | 15 | 20 | - | Inch Size | Made-to-Order Product | 2.3 | ||
SGD 174.07 | 1 Piece(s) | 32 Day(s) | 3.18 | ~4 | - | ~3 | [Red] Red (opaque) | 15 | - | 100 | Inch Size | Made-to-Order Product | 2.3 | ||
- | 1 Piece(s) | Quote | 4.76 | ~5 | 3.48 | ~4 | [Red] Red (opaque) | 25 | 20 | - | Inch Size | Made-to-Order Product | 2.3 | ||
SGD 177.80 | 1 Piece(s) | 32 Day(s) | 4.76 | ~5 | 3.48 | ~4 | [Red] Red (opaque) | 25 | - | 100 | Inch Size | Made-to-Order Product | 2.3 | ||
SGD 59.03 | 1 Piece(s) | 32 Day(s) | 6.35 | ~7 | 4.57 | ~5 | [Red] Red (opaque) | 30 | 20 | - | Inch Size | Made-to-Order Product | 2.3 | ||
SGD 295.05 | 1 Piece(s) | 32 Day(s) | 6.35 | ~7 | 4.57 | ~5 | [Red] Red (opaque) | 30 | - | 100 | Inch Size | Made-to-Order Product | 2.3 | ||
SGD 112.00 | 1 Piece(s) | 32 Day(s) | 9.53 | ~10 | 6.99 | ~7 | [Red] Red (opaque) | 50 | 20 | - | Inch Size | Made-to-Order Product | 2.3 | ||
SGD 559.88 | 1 Piece(s) | 32 Day(s) | 9.53 | ~10 | 6.99 | ~7 | [Red] Red (opaque) | 50 | - | 100 | Inch Size | Made-to-Order Product | 2.3 | ||
SGD 175.58 | 1 Piece(s) | 32 Day(s) | - | ~15 | 9.56 | ~10 | [Red] Red (opaque) | - | 20 | - | Inch Size | Made-to-Order Product | 2.3 | ||
SGD 877.80 | 1 Piece(s) | 32 Day(s) | - | ~15 | 9.56 | ~10 | [Red] Red (opaque) | - | - | 100 | Inch Size | Made-to-Order Product | 2.3 |
Loading...
Basic Information
| Type | Straight | Cutting Service Usage | No | Material | Polyolefinic Resin |
|---|---|---|---|---|---|
| Applicable Fluid | Water / Air | Operating Environment | Standard | Material: Nylon | Nylon 12 |
| Operating temperature(°C) | -40 to +100, With Water: 0 to +70 (Do Not Freeze) |
Specification/Dimensions
-
Outer Dia. D(Ø)
-
O.D. [Distinction]
-
Inner Dia. d(Ø)
-
I.D. [Distinction]
-
Color
- Black
- White
- Red
- Blue
- Yellow
- Green
- Black
-
Bundle winding length(m)
-
Reel winding length(m)
- 100
- 150
- 200
- 500
-
Applicable Tube Size
- Inch Size
- Metric Size
-
Specifications
- Made-to-Order Product
- Standard Product
-
Maximum operating pressure(MPa)
- 1.6
- 2
- 2.3
- 3.0
- 3.3
-
type
- T
- TIA
Days to Ship
-
- All
- Same day
- 31 Day(s) or Less
- 32 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(65) 6733 7211 / FAX：(65) 6733 0211
- 9:00am - 6:00pm (Monday - Friday)
- Technical Inquiry
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?