(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
- Please be informed that there will be no shipment from Japan during the upcoming year-end and New Year holiday period. However, Singapore’s stock items are available during these periods. Click here for details.
Parallel Type Air Gripper, Long Stroke MHZL2 Series (MHZL2-10D2-Y69ALS)
- On Sale Till 31/03/2025
[Features]
· Accommodates diverse workpiece diameters with a single unit.
· Nearly double the standard stroke.
· Long stroke, yet also compact and lightweight.
(i)Caution
- Refer to the catalog for details on product specifications.
- Product images may be representative. Refer to the manufacturer's catalog for details.
Part Number
Configured Part Number is shown.
MHZL2-10D2-Y69ALS
MHZL2 Series Parallel Type Air Gripper / Long Stroke Specifications
Double acting, inner-diameter grip JIS symbol
Double acting, outer-diameter grip JIS symbol
Single acting, normally closed, inner-diameter grip JIS symbol
Single acting, normally open, outer-diameter grip JIS symbol
| Fluid | Air | ||
|---|---|---|---|
| Operating pressure | Double acting | ø10 (diameter 10 mm): 0.2 to 0.7 MPa ø16 to 25 (diameter 16 to 25 mm): 0.1 to 0.7 MPa | |
| Single acting | Normally open | ø10 (diameter 10 mm): 0.35 to 0.7 MPa ø16 to 25 (diameter 16 to 25 mm): 0.25 to 0.7 MPa | |
| Normally closed | |||
| Ambient and fluid temperature | -10 to +60°C | ||
| Repeatability | ±0.01 mm | ||
| Maximum operating frequency | 120 c.p.m. | ||
| Lubrication | Non-lube | ||
| Action | Double acting / single acting | ||
| Auto switch (option) * | Solid state auto switch (3-wire, 2-wire) | ||
*See the manufacturer's catalog for detailed specifications of auto switches.
Model
| Action | Model | Bore size (mm) | Gripping force *1 | Opening/closing stroke (both sides) mm | *2 Weight g | ||
|---|---|---|---|---|---|---|---|
| Gripping force per finger Effective value N | |||||||
| Outer-diameter gripping force | Inner-diameter gripping force | ||||||
| Double acting | MHZL2-10D | 10 | 11 | 17 | 8 | 60 | |
| MHZL2-16D | 16 | 34 | 45 | 12 | 135 | ||
| MHZL2-20D | 20 | 42 | 66 | 18 | 270 | ||
| MHZL2-25D | 25 | 65 | 104 | 22 | 470 | ||
| Single acting | Normally open | MHZL2-10S | 10 | 7.1 | - | 8 | 70 |
| MHZL2-16S | 16 | 27 | 12 | 145 | |||
| MHZL2-20S | 20 | 33 | 18 | 290 | |||
| MHZL2-25S | 25 | 50 | 22 | 515 | |||
| Normally closed | MHZL2-10C | 10 | - | 13 | 8 | 70 | |
| MHZL2-16C | 16 | 38 | 12 | 145 | |||
| MHZL2-20C | 20 | 57 | 18 | 290 | |||
| MHZL2-25C | 25 | 85 | 22 | 515 | |||
*1 Values based on pressure of 0.5 MPa, gripping point L = 20 mm, at center of stroke.
*2 Values above do not include auto switch weight.
MHZL2-10□ to 25□ structure drawing
Double acting / with fingers open structure drawing
Single acting type (normally open) structure drawing
Double acting / with fingers closed structure drawing
Single acting type (normally closed) structure drawing
| No. | Description | Material | Note |
|---|---|---|---|
| 1 | Body | Aluminum alloy | Hard anodizing |
| 2 | Piston | ø10 (diameter 10 mm), 16: stainless steel ø20 (diameter 20 mm), 25: aluminum alloy | ø20 (diameter 20 mm), 25: hard anodized |
| 3 | Lever | Stainless steel | Nitrided |
| 4 | Guide | Stainless steel | Heat treated |
| 5 | Finger | Stainless steel | Heat treated |
| 6 | Roller stopper | Stainless steel | - |
| 7 | Lever shaft | Stainless steel | Nitrided |
| 8 | Cap | Aluminum alloy | Clear anodized |
| 9 | Bumper | Urethane rubber | - |
| 10 | Rubber magnet | Synthetic rubber | - |
| 11 | Steel ball | High carbon chrome bearing steel | - |
| 12 | Needle roller | High carbon chrome bearing steel | - |
| 13 | Type C retaining ring | Carbon steel | Phosphate coated |
| 14 | Exhaust plug A | Brass | Electroless nickel plating |
| 15 | Exhaust filter A | Polyvinyl formal | - |
| 16 | Spring | Stainless steel spring wire | - |
| 17 | Rod seal | NBR | - |
| 18 | Piston seal | NBR | - |
| 19 | Gasket | NBR | - |
External dimensional drawing
MHZL2-10□ Double Acting / Single Acting
(Unit: mm)
MHZL2-10□ / double acting / single acting basic type dimensional drawing
- *In the case of single acting, one side port is a breathing hole.
- *The values inside ( ) are dimensions for the single acting type.
(Unit: mm)
Dimensions: auto switch mounting groove
*When auto switches are used on the mounting groove, through-hole mounting is not possible.
Precautions
- *The images for this product are representative images. *The product shown may differ from the actual product.
- *See the manufacturer's catalog for information other than the above.
| Part Number |
|---|
| MHZL2-10D2-Y69ALS |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Gripping Methods | Main Body Shape | Operation Method | Dimensions when open (mm) | Dimensions when closed (mm) | Gripping Force (when 0.5Mpa at opening) (N) | Gripping Force (when 0.5Mpa at closing) (N) | Operating Pressure Range (MPa) | Cylinder internal diameter (mm) | Finger position / Options | Body options | Auto switch | Number of switches | Lead wire length | Made to order specifications | Connector type for gripper opening/closing | Dust cover materials |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | Quote | Pinch, Parallel Type / Open, Parallel Type | Square Shape | Double Acting Type | 19.2 | 11.2 | 17 | 11 | 0.2～0.7 | 10 | Through holes in opening/closing direction | Basic type | Y69A | 1 pc. | 3 m | None | None | - |
Loading...
Basic Information
| Type | Main body | Number of Fingers | 2 pcs. | Environment, Applications | Standard |
|---|---|---|---|---|---|
| Additional Functions | With Linear Guide / High Accuracy | Stroke Adjustment Mechanism | Not Provided |
Please check the type/dimensions/specifications of the part MHZL2-10D2-Y69ALS in the Parallel Type Air Gripper, Long Stroke MHZL2 Series series.
Specification/Dimensions
-
Gripping Methods
- Pinch, Parallel Type
- Pinch, Chuck Type
- Open, Parallel Type
- Open, Chuck Type
-
Dust cover materials
- Chloroprene rubber (CR)
-
type
- MHZL2-□C
- MHZL2-□D
- MHZL2-□S
-
Main Body Shape
- Square Shape
- Square Shape (Flat Shape)
-
Operation Method
- Double Acting Type
- Single Acting Type (Normally Open)
- Single Acting Type (Normally Closed)
-
Dimensions when open(mm)
-
Dimensions when closed(mm)
-
Gripping Force (when 0.5Mpa at opening)(N)
-
Gripping Force (when 0.5Mpa at closing)(N)
-
Cylinder internal diameter(mm)
-
Finger position / Options
- Basic type
- Flat type fingers
- Side tapped mounting
- Through holes in opening/closing direction
-
Body options
- End boss type / axial piping type / with ø4 quick-connect double pipe fitting
- End boss type / axial piping type / with ø4 quick-connect fitting
- End boss type axial ported with ø4 one-touch fitting
- End boss type axial ported with ø4 one-touch fitting for coaxial tubing
- End boss type / axial piping type / with M5 port
- End boss type axial ported with M5 port
- Basic type
- End boss type / side piping type
- End boss type side ported
-
Auto switch
-
Number of switches
-
Lead wire length
- 0.5 m
- 1 m
- 3 m
- 5 m
- None
-
Made to order specifications
- Heat resistance (100°C)
- Axial ported
- Closing direction spring assist
- EPDM seal / fluorine grease
- Fluorine grease
- Fluoroelastomer seal
- Grease for food processing machines
- Grease for food processing machines / fluorine grease
- No magnet
- None
- Opening direction spring assist
-
Connector type for gripper opening/closing
- M8 3-pin
- M8 4-pin
- M12 4-pin
- None
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- Same day
- 31 Day(s) or Less
- 32 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Similar Part Numbers
| Part Number |
|---|
| MHZL2-10C-M9BM |
| MHZL2-10C-M9BMS |
| MHZL2-10C-M9BS |
| MHZL2-10D2-Y69ALS-X4 |
| MHZL2-10D2-Y69AS |
| MHZL2-10D2-Y69B |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Gripping Methods | Main Body Shape | Operation Method | Dimensions when open (mm) | Dimensions when closed (mm) | Gripping Force (when 0.5Mpa at opening) (N) | Gripping Force (when 0.5Mpa at closing) (N) | Operating Pressure Range (MPa) | Cylinder internal diameter (mm) | Finger position / Options | Body options | Auto switch | Number of switches | Lead wire length | Made to order specifications | Connector type for gripper opening/closing | Dust cover materials |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | Quote | Open, Parallel Type | Square Shape | Single Acting Type (Normally Closed) | 19.2 | 11.2 | 13 | - | 0.35～0.7 | 10 | Basic type | Basic type | M9B | 2 pcs. | 1 m | None | None | - | ||
- | 1 Piece(s) | Quote | Open, Parallel Type | Square Shape | Single Acting Type (Normally Closed) | 19.2 | 11.2 | 13 | - | 0.35～0.7 | 10 | Basic type | Basic type | M9B | 1 pc. | 1 m | None | None | - | ||
- | 1 Piece(s) | Quote | Open, Parallel Type | Square Shape | Single Acting Type (Normally Closed) | 19.2 | 11.2 | 13 | - | 0.35～0.7 | 10 | Basic type | Basic type | M9B | 1 pc. | 0.5 m | None | None | - | ||
- | 1 Piece(s) | Quote | Open, Parallel Type / Pinch, Parallel Type | Square Shape | Double Acting Type | 19.2 | 11.2 | 17 | 11 | 0.2～0.7 | 10 | Through holes in opening/closing direction | Basic type | Y69A | 1 pc. | 3 m | Heat resistance (100°C) | None | - | ||
- | 1 Piece(s) | Quote | Open, Parallel Type / Pinch, Parallel Type | Square Shape | Double Acting Type | 19.2 | 11.2 | 17 | 11 | 0.2～0.7 | 10 | Through holes in opening/closing direction | Basic type | Y69A | 1 pc. | 0.5 m | None | None | - | ||
- | 1 Piece(s) | Quote | Open, Parallel Type / Pinch, Parallel Type | Square Shape | Double Acting Type | 19.2 | 11.2 | 17 | 11 | 0.2～0.7 | 10 | Through holes in opening/closing direction | Basic type | Y69B | 2 pcs. | 0.5 m | None | None | - |
Tech Support
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?