(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Discrete Wire for Connection, DF1E Series (2.5 mm Pitch)【1-100 Pieces Per Package】 (DF1E-2022PC)
A board-to-cable, cable-to-cable connector with a lock (2.5-mm pitch). The inner locking type mechanism prevents the connector from disconnecting due to impact.
In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.
Japanese Only
Part Number
Configured Part Number is shown.
DF1E-2022PC
Main Features of DF1E Series 2.5‑mm Pitch Board-to-Cable Connector With Lock
Added full-lock function / Inner-lock system full-lock mechanism / Mis-insertion prevention
Can be double locked
Added full-lock function
The full-lock mechanism features an inner lock system. This mechanism prevents disengagements due to unexpected external shock.
Increase in crimping contact fixation force and semi-insertion prevention
The double lock is activated for the usage method in which stress is applied to the cable, to increase crimping contact fixation force, and to prevent the semi-insertion (incomplete insertion) of the crimping contact.
Adopts a molded lance
A molded lance has been adopted as the contact lances may become deformed due to terminal entanglement after crimping.
Prevents mis-insertion
Equipped with a mechanism which completely prevents reverse insertion and insertion between dissimilar contacts.
Solder crack prevention measures
Glass-reinforced resin has been adopted for the pin header as a measure against solder cracking caused by heat shrinkage.
Potting (resin filler) compatible
Pin headers in which potting is possible are available in the product lineup. Low-profile (in-house comparison) models with a mounting height of 19.8 mm (no retainer) compatible with potting of up to 8 mm are available.
Reduced production equipment costs
Because DF1B series crimping contacts are used for the female contacts, there is no need to invest in new equipment. However, if applying a retainer with a wire of AWG#22 or higher, please use DF1E crimp contacts. Female in-line crimp contacts are used in combination with DF1B applicators so there is no need to investment in new equipment.
Wide range of applications
Circuit board soldered DIP types and in-line types with a wide range of applications are available within the same product series.
Compliant with UL and C-UL standards
Supports use with glow wires (compliant with IEC 60695-2-11)
Product Standards
| Rating | Rated Current (Note 1) AWG#20 to 24: 3 A 26: 2 A 28: 1 A 30: 0.5 A Rated Voltage 250 V AC | Operating temperature range: -35 to +85°C (Note 2) Operating humidity range 40 to 80% | Storage temperature range -10 to +60°C (Note 3) Storage humidity range 40 to 70% (Note 3) |
|---|
| Ratings of UL and C-UL Standard Compliant Products | ||
|---|---|---|
| Rating | Rated Current | AWG#20 to 22: 3 A AWG#24 to 28: 1 A AWG#30: 0.5 A |
| Rated voltage | 30 V AC | |
UL, C-UL File No. E52653
(C-UL applicable country: Canada / UL applicable country: U.S.A.)
| Item | Standard | Conditions |
|---|---|---|
| 1. Contact resistance | 30 mΩ or less | Measure at 20 mV or less and 1 mA |
| 2. Insulation resistance | 1,000 MΩ or more | Measure at 500 V DC |
| 3. Withstand Voltage | There shall be no flashover or dielectric breakdown. | Apply 650 V AC of voltage for 1 min. |
| 4. Single unit insertion/extraction force | Min. 0.29 N, Max. 4.41 N | Measure using a steel pin of □0.635 ±0.002 |
| 5. Durability (insertion/extraction) | 30 mΩ or less | 30 insertions and extractions |
| 6. Vibration resistance | There shall be no discontinuity for 1 μs or greater. | Frequency: 10 to 55 Hz, Single amplitude: 0.75 mm. Three directions, 2 hours |
| 7. Shock resistance | There shall be no discontinuity for 1 μs or greater. | Acceleration: 490 m/s2, 11 ms, Half sine wave, Three times each in 3 directions |
| 8. Humidity resistance | 30 mΩ or less | Leave at temperature 40°C ±2°C and humidity 90 to 95% for 96 hours |
| 9. Temperature cycle | 30 mΩ or less | (-55°C: 30 mins > 5 to 35°C: 5 mins > 85°C: 30 mins > 5 to 35°C: 5 mins) 5 cycles |
| 10. Solder Heat Resistance | No deformation of components affecting performance. | Flow: 260°C, 10 seconds Manual soldering - Soldering iron temperature: 300°C for 3 seconds |
Note 1: The rated current may vary depending on the wire size used. The rating of the header is 3 A.
(Note 2) This includes temperature increases caused by the flow of current.
(Note 3) The term "storage" refers to products stored for long periods of time prior to mounting and use. The operating temperature and humidity range are applicable in a non-energized state after board mounting.
Product Specifications
| Connector Type | Contacts, sockets, headers, in-line plugs, accessories |
|---|---|
| Compliance Standards | JIS, IEC |
| Number of Contacts | 2, 10, 11, 12, 13, 14, 15, 3, 4, 5, 6, 7, 8, 9 |
| No. of Rows (Mating Part) | 1 |
| Mounting Pitch | 3 mm |
| Opening Pitch | 2.5 mm |
| Rated Current | 3 A |
| Rated Voltage (AC) | 250 V AC |
| Number of Matings and Un-Matings | 30, 50 |
| Board Mounting Method | Through-hole DIP |
| Opening Direction | Straight |
| Board Mounting Style | Standard on-board |
| Panel Mounting Method | Snap-in |
| Contact Plating | Gold, tin |
| Wiring Method | Crimp |
| Compatible Wire Type | Discrete wire |
| Compatible Wire Size (AWG) Min. | AWG 22, 28 |
| Compatible Wire Size (AWG) Max. | AWG 20, 24 |
| Operating Temperature Range (Max.) | 85°C |
| Operating Temperature Range (Min.) | -35°C |
| Glow Wire Compatible | Yes |
Product Materials
| Product | Part Name | Materials | Finish | Flame-Retardant Standard |
|---|---|---|---|---|
| Socket | Insulator | Polyamide resin | Natural (white) | UL94V-0 |
| Header | Insulator | Polyamide resin (glass-reinforced) | Natural (beige) | UL94V-0 |
| Contacts | Brass | Tin or gold plated | - | |
| In-line plug | Insulator | Polyamide resin | Natural (white) | UL94V-0 |
| Retainer | Insulator | Polyamide resin | Black | UL94V-0 |
| Crimp contact | Contacts | Phosphor bronze | Tin or gold plated | - |
Product Usage Precautions
1. Recommended soldering conditions
- Flow conditions for automatic soldering devices - Solder temperature: 260°C, Soldering time: within 10 seconds
- Manual soldering conditions - Soldering iron temperature: 300°C, Soldering time: within 3 seconds
2. Cleaning conditions
- If washing with potting-compatible headers, be aware that any residual cleaning solutions within the connector may cause malfunctions to occur.
3. Precautions
- Forcible extraction of connectors may cause connector damage to occur. If extraction is difficult, gently push in the connector and engage the lock to facilitate extraction.
- Depending on the wiring layout within equipment, tension may be applied to the wires, possibly causing the contacts to become disengaged. The manufacturer recommends the use of a retainer when this happens.
- Incomplete insertion of the contact can be prevented by mounting a retainer; however, mounting of a retainer might not be possible when the contact protrudes beyond the socket. Insert the contact securely and then mount the retainer.
- If the potting process is implemented, be sure to fill the connector with resin with due consideration given to the surface tension of the resin.
- Depending on the manufacturing lot of this product or its storage state following manufacture, the color/hue of the product may change slightly. However, this does not affect performance.
| Part Number |
|---|
| DF1E-2022PC |
| Part Number | Standard Unit Price | Number of pc(s). included in pkg. | Minimum order quantity | Volume Discount | Days to Ship | Applicable pin/contact | Number Of Pins | Connector Type | Rated Current (A) | Wiring Method | Connection direction | Plating of part touching terminal | Product Category | Specifications | Features | Conforming wire size (AWG) | Contact Pitch (mm) | Wire connection form | Terminal pitch (mm) | Special Notes |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SGD 6.24 | 100 Pieces Per Package | 1 Pack(s) | 4 Day(s) or more | Male | - | [Cable Connection] Cable Connection | 3 | Crimp | - | Tin | Terminal | NA | Loose terminal | 20–22 | NA | Male terminal | NA | - |
Loading...
Basic Information
| Connector Shape | Rectangular | Connector series initials | D/E/F | D/E/F | DF |
|---|---|---|---|---|---|
| Allowable Voltage(V) | AC250 | Representative Standard | UL / CUL | Operating Temperature Range(°C) | -35 to +85 |
Please check the type/dimensions/specifications of the part DF1E-2022PC in the Discrete Wire for Connection, DF1E Series (2.5 mm Pitch) series.
Specification/Dimensions
-
Number Of Pins
-
Connection direction
- Straight
- Angle
-
Applicable pin/contact
- Male
- Female
-
Connector Type
- Cable Connection
- For PCB
- Panel Mount
- Cable Connection
-
Rated Current(A)
-
Wiring Method
- Crimp
- Other
-
Plating of part touching terminal
- No terminal
- Tin
-
Product Category
-
Specifications
- NA
- With panel lock
-
Features
- Loose terminal
- NA
-
Conforming wire size(AWG)
- 20–22
- 28 to 24
- NA
-
Contact Pitch(mm)
-
Wire connection form
- Crimp case
- Female terminal
- Male terminal
- Right angle dip
- Straight dip
Days to Ship
-
- All
- 3 Day(s) or Less
- 4 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Similar Part Numbers
| Part Number |
|---|
| DF1E-11S-2.5C |
| DF1E-12S-2.5C |
| DF1E-13S-2.5C |
| DF1E-2022SC |
| DF1E-2428PC |
| DF1E-2EP-2.5C |
| Part Number | Standard Unit Price | Number of pc(s). included in pkg. | Minimum order quantity | Volume Discount | Days to Ship | Applicable pin/contact | Number Of Pins | Connector Type | Rated Current (A) | Wiring Method | Connection direction | Plating of part touching terminal | Product Category | Specifications | Features | Conforming wire size (AWG) | Contact Pitch (mm) | Wire connection form | Terminal pitch (mm) | Special Notes |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SGD 26.15 | 100 Pieces Per Package | 1 Pack(s) | 4 Day(s) or more | Female | 11 | [Cable Connection] Cable Connection | 3 | Crimp | Straight | No terminal | Socket | NA | NA | NA | 2.5 | Crimp case | 2.5 | Use DF1B series terminals for the female crimp terminals. If mounting a retainer using wires of AWG#22 or greater, use a DF1E crimp terminal. | ||
SGD 26.57 | 100 Pieces Per Package | 1 Pack(s) | 4 Day(s) or more | Female | 12 | [Cable Connection] Cable Connection | 3 | Crimp | Straight | No terminal | Socket | NA | NA | NA | 2.5 | Crimp case | 2.5 | Use DF1B series terminals for the female crimp terminals. If mounting a retainer using wires of AWG#22 or greater, use a DF1E crimp terminal. | ||
SGD 27.83 | 100 Pieces Per Package | 1 Pack(s) | 4 Day(s) or more | Female | 13 | [Cable Connection] Cable Connection | 3 | Crimp | Straight | No terminal | Socket | NA | NA | NA | 2.5 | Crimp case | 2.5 | Use DF1B series terminals for the female crimp terminals. If mounting a retainer using wires of AWG#22 or greater, use a DF1E crimp terminal. | ||
SGD 6.80 | 100 Pieces Per Package | 1 Pack(s) | 4 Day(s) or more | Female | - | [Cable Connection] Cable Connection | 3 | Crimp | - | Tin | Terminal | NA | Loose terminal | 20–22 | NA | Female terminal | NA | Use if mounting a retainer. | ||
SGD 9.84 | 100 Pieces Per Package | 1 Pack(s) | 4 Day(s) or more | Male | - | [Cable Connection] Cable Connection | 1 | Crimp | - | Tin | Terminal | NA | Loose terminal | 28 to 24 | NA | Male terminal | NA | - | ||
SGD 28.23 | 100 Pieces Per Package | 1 Pack(s) | 4 Day(s) or more | Male | 2 | Panel Mount | 3 | Crimp | Straight | No terminal | Plug | With panel lock | NA | NA | 2.5 | Crimp case | 2.5 | - |
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(65) 6733 7211 / FAX：(65) 6733 0211
- 9:00am - 6:00pm (Monday - Friday)
- Technical Inquiry
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?