(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
2 mm Pitch, Direct-To-Circuit Board Connector, DF4 Series (DF4-18DP-2C)
Connector for direct board-to-cable connection with 2-mm pitch. By directly attaching the terminal insertion socket into the circuit board, the header cost can be minimized.
[Features]
・Minimizes header cost: using a dual insertion-removal socket and directly attached connector terminal harness, both circuit boards can have their separate functions used as-is, reducing the required number of headers for a dual terminal socket harness from 2 to 1.
・Small type/multi-pin: a wide range of small types with a number of pins.
・Circuit board mounting height: 4.3 mm (1 crimp attachment array), maximum pin number: 32 (2 crimp attachment arrays).
・Temporary circuit board fastening mechanism: Connector can be temporarily affixed to the circuit board in order to make insertion easier.
Japanese Only
Part Number
Configured Part Number is shown.
DF4-18DP-2C
2‑mm Pitch Direct-To-Board Connector
DF4 Series list
Board pre-fixed mechanism
Specifications of DF4 Series 2‑mm Pitch Board-to-Cable Connector
Product Standards
| Rating | Rated current (Note 1) | Crimp | Wire size | AWG 24: 3 A | Operating Temperature Range | -30 to 85°C (Note 2) |
|---|---|---|---|---|---|---|
| AWG 26: 2 A | Operating humidity range | 40 to 80% | ||||
| AWG 28: 1 A | Storage temperature range | -10 to 60°C (Note 3) | ||||
| Rated voltage | Crimp | 250 V AC | Storage humidity range | 40 to 70% (Note 3) | ||
| Item | Standard | Conditions | |
|---|---|---|---|
| 1. Insulation resistance | 1,000 MΩ or more | Measure at 500 V DC | |
| 2. Withstand voltage | There shall be no flashover or dielectric breakdown. | Energize at 650 V AC for 1 min. | |
| 3. Crimping area resistance | 30 mΩ or less | Measure at 100 mA | |
| 4. Vibration resistance | No damage, cracks, or parts looseness. | Frequency: 10 to 55 Hz, Single amplitude: 0.75 mm, Three directions, 2 hours | |
| 5. Humidity resistance | Crimping area resistance: 30 mΩ or less, Insulation resistance: 500 MΩ or more | Leave at temperature 40°C ±2°C and humidity 90 to 95% for 96 hours | |
| 6. Temperature cycle | Crimping area resistance: 30 mΩ or less, Insulation resistance: 1,000 MΩ or more | (-55°C: 30 mins > 5 to 35°C: 10 mins > 85°C: 30 mins > 5 to 35°C: 10 mins) 5 cycles | |
| 7. Solder heat resistance | No melting of resin parts affecting performance. | Flow: 250°C for 10 seconds | Manual solder: Soldering iron temperature of 300°C for 3 seconds |
Note 1. The rated current may vary depending on the wire size used.
Note 2. This includes temperature increases caused by the flow of current.
Note 3. The term "storage" refers to products stored for long periods of time prior to mounting and use. The operating temperature and humidity range are applicable in a non-energized state after board mounting.
Note 4. Information contained in this catalog represents general requirements for this product series.
Materials
| Product | Part Name | Materials | Finish | UL Standard |
|---|---|---|---|---|
| Crimping plug | Insulator | Polyamide resin | Black | UL94V-0 |
| Crimping contact for plug | Contacts | Brass | Tin plating | ― |
Product Outline Drawing And Dimensions
Single-row crimping plug
- *Compatible through hole diameter: ø0.8 mm +0, +0.1
Single-row crimping plug dimensional drawing
Crimping contact dimensional drawing
| Conductor Size (Stranded Wire Configuration) | Recommended Cable | Jacket Outer Diameter |
|---|---|---|
| AWG24 (11 cores / 0.16 mm) | UL1061 | ø0.75 to ø1.2 mm |
| AWG26 (7 cores / 0.16 mm) | ||
| AWG28 (7 cores / 0.127 mm) | UL1061/1007 |
Compatible cable (tin-plated annealed copper wire)
- *Strip length: 1.3 to 1.9 mm
| Type | Product No. | HRS No. | Compatible Contact |
|---|---|---|---|
| Applicator | AP105-DF4-2428P | CL901-4539-0 | DF4-2428PCF(05) |
| Press main body | CM-105 | CL901-0005-4 | ― |
| Manual crimping tools | DF4-TA2428HC | CL550-0173-6 | DF4-2428PC(05) |
| Extraction tool | DF-C-PO(B) | CL550-0179-2 | DF4-2428PCF(05) |
Applicable crimping tool for crimping contacts
Double-row crimping plug
- *Compatible through hole diameter: ø0.9 mm ±0.05
Double-row crimping plug dimensional drawing
- *The DIP side may vary depending on the cable thickness and on whether the crimping terminal is bent up or down.
Product Usage Precautions
Soldering precautions
- Flow conditions for automatic soldering devices - Solder temperature: 250°C ±5°C, Soldering time: within 3 seconds
- Manual soldering conditions - Soldering iron temperature: 290°C ±10°C, Soldering time: within 2 seconds
- If the cable neighboring the connector area is bent, the cable jacket may break due to solder heat, causing the cable core to be exposed. To prevent this, ensure a large bending radius (refer to diagram)
- After soldering, applying a load to the cable while the cable or connector is still holding heat may cause the jacket holding area to become loose. As such, be sure to return the connector to room temperature after soldering
Do not use solvents such as trichloroethane that may cause cable coating damage. Also avoid heated cleaning when using solvents.
| Part Number |
|---|
| DF4-18DP-2C |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Number Of Pins | Wiring Method | Connection direction | Plating of part touching terminal | Product Category | Features | Contact Pitch (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|
SGD 0.25 | 1 Piece(s) | 3 Day(s) or more | 18 | - | Straight | No terminal | Double low plug | NA | 2 |
Loading...
Basic Information
| Connector Shape | Rectangular | Connector series initials | D/E/F | D/E/F | DF |
|---|---|---|---|---|---|
| Applicable pin/contact | Male | Connector Type | For PCB | Rated Current(A) | 3 |
| Allowable Voltage(V) | AC250 | Specifications | Circuit Board Direct Attachment | Operating Temperature Range(°C) | -30 to +85 |
Specification/Dimensions
-
Wiring Method
- Crimp
-
Number Of Pins
-
Connection direction
- Straight
-
Plating of part touching terminal
- No terminal
- Tin
-
Product Category
-
Features
- Loose terminal
- NA
-
Contact Pitch(mm)
Days to Ship
-
- All
- 3 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(65) 6733 7211 / FAX：(65) 6733 0211
- 9:00am - 6:00pm (Monday - Friday)
- Technical Inquiry
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?