(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Half-Pitch Multi-Function 2-Piece Connector, FX2 Series (FX2B-20PA-1.27DSL(71))
Combination offers various connections for board-to-board (stacking, horizontal, vertical) and ribbon cable connections.
Japanese Only
Part Number
Configured Part Number is shown.
FX2B-20PA-1.27DSL(71)
Square Connector For Various Board-To-Board Connections (Stacking, Horizontal, Vertical) and Ribbon Cable Connections
For use with various types of device including computers, peripheral terminal equipment and various types of OA equipment.
Specifications of FX2 Series Half-Pitch Multi-Function Two-Piece Connectors
Product Standards
| Rating | Rated current: 0.5 A Rated voltage: 125 V AC | Operating temperature range: -55 to +85°C Operating humidity range: 40 to 80% | Storage temperature range: -10 to +60°C Storage humidity range: 40 to 70% | |||
|---|---|---|---|---|---|---|
| Item | Standard | Conditions | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1. Insulation resistance | 100 MΩ or more | Measure at 250 V DC | |||||||||||
| 2. Withstand voltage | There shall be no flashover or dielectric breakdown. | Energize at 300 V AC for 1 min. | |||||||||||
| 3. Contact resistance | 45 mΩ or less | Measure at 100 mA | |||||||||||
| 4. Vibration resistance | There shall be no electrical discontinuity for 1 μs or greater. | 0 to 55 Hz, Single amplitude: 0.75 mm, Three directions, 2 hours each | |||||||||||
| 5. Humidity resistance | Contact resistance: 55 mΩ or less, Insulation resistance: 100 MΩ or more | Leave at temperature 40°C ±2°C and humidity 90 to 95% for 96 hours | |||||||||||
| 6. Temperature cycle | Contact resistance: 55 mΩ or less Insulation resistance: 100 MΩ or more No damage, cracks, or parts dislocation. | (-55°C: 30 mins. > 15 to 35°C: 2 to 3 mins. > 85°C: 30 mins. > 15 to 35°C: 2 to 3 mins.) 5 cycles | |||||||||||
| 7. Durability (Mating / Un-mating) | Contact resistance: 55 mΩ or less | 500 times | |||||||||||
| 8. Solder heat resistance | No melting of resin parts affecting performance. | SMT type | Reflow: At the recommended temperature profile Manual soldering - Soldering iron temperature: 360°C for 5 seconds | ||||||||||
| DIP type | Solder bath: 260°C for 10 seconds Manual soldering: Soldering iron temperature of 360°C for 5 seconds | ||||||||||||
(Note 1) This includes temperature increases caused by the flow of current.
(Note 2) The term "storage" refers to products stored for long periods of time prior to mounting and use. The operating temperature and humidity are applicable in a non-energized state after board mounting.
Materials
| Item | Materials | Finish | Note | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Insulator | DIP type | Polyamide resin | Black | UL94V-0 | |||||||||
| Socket | PBT resin / Polyamide resin | ||||||||||||
| SMT type | PPS resin | Light brown | |||||||||||
| Contacts | Receptacle | Phosphor bronze | Selective gold plating | - | |||||||||
| Socket | |||||||||||||
| Header | Phosphor bronze or brass | ||||||||||||
Product Features
Wide Variety of Product Options for Various Types of Connection
Stacked connections (stack height: 12 to 16 mm)
Horizontal connection
Vertical connection
Stacked connection dimensional drawing
| Header | Receptacle | |||
|---|---|---|---|---|
| DIP type | SMT type | |||
| FX2C-*S-1.27DSA(L) | FX2CA1-*S-1.27DSA(L) | FX2-*S-1.27SV(L) | ||
| FX2CA-*S-1.27DSA(L) | FX2CA2-*S-1.27DSA(L) | |||
| DIP type | FX2C-*P-1.27DSA(L) | 12 | 14 | 12.2 |
| FX2CA-*P-1.27DSA(L) | ||||
| FX2CA1-*P-1.27DSA(L) | 13 | 15 | 13.2 | |
| FX2CA2-*P-1.27DSA(L) | 14 | 16 | 14.2 | |
| SMT type | FX2-*P-1.27SV(L) | 12.1 | 14.1 | 12.3 |
Connection example
Connection example
Simple Single-Action Operation
The ribbon cable connection type allows easy one-touch operation with either single hand.
Extraction method
1. Pick internal locks with thumb and the index finger.
2. The cable connector features a unique click feel and can be easily inserted and extracted.
(*Reverse steps 1 and 2 when inserting.)
Product Lineup
Board-to-board, cable type
Board-to-cable type
| Part Number |
|---|
| FX2B-20PA-1.27DSL(71) |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Applicable pin/contact | Number Of Pins | Connector Type | Wiring Method | Connection direction | Product Category | Specifications | Features | Straight type stack height (assembly) | Straight type stack height (individual) | Terminal pitch (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SGD 3.93 | 1 Piece(s) | 4 Day(s) or more | 10 | Male | 20 | For PCB | [Other] Circuit Board Mounting (DIP) | Angle | Header | Right angle type for locks | With board temporary fixing pin | NA | NA | 2.54 |
Loading...
Basic Information
| Connector Shape | Rectangular | Connector series initials | D/E/F | D/E/F | FX |
|---|---|---|---|---|---|
| Rated Current(A) | 0.5 | Allowable Voltage(V) | AC125 | Plating of part touching terminal | Gold |
| Contact Pitch(mm) | 1.27 | Operating Temperature Range(°C) | -55 to +85 |
Specification/Dimensions
-
Applicable pin/contact
- Male
- Female
-
Number Of Pins
-
Connector Type
- Cable Connection
- For PCB
- Board-to-Board
- Cable Connection
-
Wiring Method
- Pressure Welding
- Other
-
Connection direction
- Straight
- Angle
-
Product Category
-
Specifications
- Cable Type with Lock
- Cable without lock type
- Right angle SMT type
- Right angle type
- Right angle type for locks
- Straight SMT type
- Straight non-cleaning type
- Straight non-washing type for locks
- Straight washing type
- Straight washing type for locks
-
Features
- NA
- With board temporary fixing pin
- With positioning boss
- With reinforcing metal fittings
-
Straight type stack height (assembly)
-
Straight type stack height (individual)
- 3.5mm
- 3.7mm
- 5.5mm
- 8.5mm
- 8.6mm
- 9.5mm
- 10.5mm
- NA
Days to Ship
-
- All
- 4 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(65) 6733 7211 / FAX：(65) 6733 0211
- 9:00am - 6:00pm (Monday - Friday)
- Technical Inquiry
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?