(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

  • Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 24/11/2024 to 7:00 (SGT) 25/11/2024. We apologize for the inconvenience.
  • Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

CXS UT Coat 4-Flute Long Neck Square Unequal Split/Unequal Lead

CXS UT Coat 4-Flute Long Neck Square Unequal Split/Unequal Lead

[Features]
· Variable split and unequal lead effectively suppress chatter vibration
· Adopts a high-toughness type resistant to chipping with carbides, then further fine-tunes the special ridge shape to enable ultra-high-performance deep cutting like never before
· Provides excellent finished surfaces in both heavy cutting and finishing
· Adopts a low friction coating to realize outstanding chip discharge performance and abrasion resistance

PDF

Japanese Only

Part Number

Configured Part Number is shown.

 
Part Number
CXS4010-030
CXS4010-060
CXS4015-045
CXS4015-085
CXS4020-060
CXS4020-110
CXS4025-075
CXS4025-135
CXS4030-090
CXS4030-160
CXS4040-120
CXS4040-210
CXS4050-150
CXS4050-260
CXS4060-180
CXS4060-320
CXS4080-240
CXS4080-420
CXS4100-300
CXS4100-520
CXS4120-360
CXS4120-620
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipBlade diameter (D)
(φ)
work material Blade length (ℓ)
(mm)
Number of flutes
(sheet)
Type Coating Shank diameter (d)
(mm)
Overall Length (L)
(mm)
Underneck length (ℓ1)
(mm)
Machining Application Blade tip shape Torsion Angle (θ) JAN Code Trusco Code Tool Material Standard / alteration classification Pitch
(Blades)
Corner type Helix angle Neck Gradient
(°)
Coating details Blade diameter tolerance Neck Diameter
(mm)
Flute Diameter Tolerance
(mm)
Neck Diameter φd1
(mm)
Shank Taper Angle Bta
(°)
Actual Effective Length Depends on Work Inclination Angle 30'
(mm)
Actual Effective Length Depends on Work Inclination Angle 1°
(mm)
Actual Effective Length Depending on Inclined Angle of Workpiece 1°30'
(mm)
Actual Effective Length Depends on Work Inclination Angle 2°
(mm)
Actual Effective Length Depends on Work Inclination Angle 3°
(mm)

SGD 49.72

1 Piece(s) 5 Day(s) or more 1General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Cast Iron[○] / Titanium[○] / Copper[◎]1.54Long Neck Square-4503Flat Surface / Side Surface / Groove / Inclined CuttingWith LeadStandard Helix (30 to 40°)-----------0~-0.020.9616°3.253.353.473.593.86

SGD 79.87

1 Piece(s) 8 Day(s) 1General Steel[○] / Heat-Treated Steel[○] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○] / Copper[○]1.5--For General Steel (AlCrN etc.)4706Side Surface / Groove-[IKOU] 37 to 404560295089839820-2898CarbideManufacturer standard product4StandardUnequal lead / unequal division16UT coat-0.02 to 00.96--------

SGD 49.72

1 Piece(s) 6 Day(s) or more 1.5General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Cast Iron[○] / Titanium[○] / Copper[◎]2.254Long Neck Square-4504.5Flat Surface / Side Surface / Groove / Inclined CuttingWith LeadStandard Helix (30 to 40°)-----------0~-0.021.4616°4.664.814.975.155.53

SGD 79.87

1 Piece(s) 8 Day(s) 1.5General Steel[○] / Heat-Treated Steel[○] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○]2.25--For General Steel (AlCrN etc.)4708.5Side Surface / Groove-[IKOU] 37 to 404560295089846820-2899CarbideManufacturer standard product4StandardUnequal lead / unequal division16UT coat-0.02 to 01.46--------

SGD 46.63

1 Piece(s) 5 Day(s) or more 2General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Cast Iron[○] / Titanium[○] / Copper[◎]34Long Neck Square-4506Flat Surface / Side Surface / Groove / Inclined CuttingWith LeadStandard Helix (30 to 40°)-----------0~-0.021.9416°6.246.446.666.897.41

SGD 75.16

1 Piece(s) 8 Day(s) 2General Steel[○] / Heat-Treated Steel[○] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○]3--For General Steel (AlCrN etc.)47011Side Surface / Groove-[IKOU] 37 to 404560295089853820-2900CarbideManufacturer standard product4StandardUnequal lead / unequal division16UT coat-0.02 to 01.94--------

SGD 46.63

1 Piece(s) 6 Day(s) or more 2.5General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Cast Iron[○] / Titanium[○] / Copper[◎]3.754Long Neck Square-4507.5Flat Surface / Side Surface / Groove / Inclined CuttingWith LeadStandard Helix (30 to 40°)-----------0~-0.022.4416°7.798.048.318.609.25

SGD 75.16

1 Piece(s) 8 Day(s) 2.5General Steel[○] / Heat-Treated Steel[○] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○]3.75--For General Steel (AlCrN etc.)47013.5Side Surface / Groove-[IKOU] 37 to 404560295089860820-2901CarbideManufacturer standard product4StandardUnequal lead / unequal division16UT coat-0.02 to 02.44--------

SGD 53.27

1 Piece(s) 5 Day(s) or more 3General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Cast Iron[○] / Titanium[○] / Copper[◎]4.54Long Neck Square-6509Flat Surface / Side Surface / Groove / Inclined CuttingWith LeadStandard Helix (30 to 40°)-----------0~-0.022.9516°9.349.649.9710.3111.09

SGD 85.18

1 Piece(s) 8 Day(s) 3General Steel[○] / Heat-Treated Steel[○] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○]4.5--For General Steel (AlCrN etc.)67016Side Surface / Groove-[IKOU] 37 to 404560295088337698-5700CarbideManufacturer standard product4StandardUnequal lead / unequal division16UT coat-0.02 to 02.95--------

SGD 55.85

1 Piece(s) 6 Day(s) or more 4General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Cast Iron[○] / Titanium[○] / Copper[◎]64Long Neck Square-65012Flat Surface / Side Surface / Groove / Inclined CuttingWith LeadStandard Helix (30 to 40°)-----------0~-0.023.8616°12.6113.0213.4613.9214.97

SGD 89.05

1 Piece(s) 8 Day(s) 4General Steel[○] / Heat-Treated Steel[○] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○]6--For General Steel (AlCrN etc.)67021Side Surface / Groove-[IKOU] 37 to 404560295088344698-5718CarbideManufacturer standard product4StandardUnequal lead / unequal division16UT coat-0.02 to 03.86--------

SGD 59.84

1 Piece(s) 5 Day(s) or more 5General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Cast Iron[○] / Titanium[○] / Copper[◎]7.54Long Neck Square-65015Flat Surface / Side Surface / Groove / Inclined CuttingWith LeadStandard Helix (30 to 40°)4560295082113485-2851---------0~-0.024.8616°15.7016.2116.76No interferenceNo interference

SGD 95.19

1 Piece(s) 8 Day(s) 5General Steel[○] / Heat-Treated Steel[○] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○]7.5--For General Steel (AlCrN etc.)67026Side Surface / Groove-[IKOU] 37 to 404560295088351698-5726CarbideManufacturer standard product4StandardUnequal lead / unequal division16UT coat-0.02 to 04.86--------

SGD 64.27

1 Piece(s) 5 Day(s) or more 6General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Cast Iron[○] / Titanium[○] / Copper[◎]94Long Neck Square-65018Flat Surface / Side Surface / Groove / Inclined CuttingWith LeadStandard Helix (30 to 40°)-----------0~-0.025.86-No interferenceNo interferenceNo interferenceNo interferenceNo interference

SGD 101.94

1 Piece(s) 8 Day(s) 6General Steel[○] / Heat-Treated Steel[○] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○]9--For General Steel (AlCrN etc.)67032Side Surface / Groove-[IKOU] 37 to 404560295088368698-5734CarbideManufacturer standard product4StandardUnequal lead / unequal division-UT coat-0.02 to 05.86--------

SGD 79.02

1 Piece(s) 6 Day(s) or more 8General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Cast Iron[○] / Titanium[○] / Copper[◎]124Long Neck Square-86024Flat Surface / Side Surface / Groove / Inclined CuttingWith LeadStandard Helix (30 to 40°)-----------0~-0.037.82-No interferenceNo interferenceNo interferenceNo interferenceNo interference

SGD 124.20

1 Piece(s) 8 Day(s) 8General Steel[○] / Heat-Treated Steel[○] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○]12--For General Steel (AlCrN etc.)89042Side Surface / Groove-[IKOU] 37 to 404560295088375698-5742CarbideManufacturer standard product4StandardUnequal lead / unequal division-UT coat-0.03 to 07.82--------

SGD 93.81

1 Piece(s) 8 Day(s) 10General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Cast Iron[○] / Titanium[○] / Copper[◎]154Long Neck Square-107030Flat Surface / Side Surface / Groove / Inclined CuttingWith LeadStandard Helix (30 to 40°)-----------0~-0.039.82-No interferenceNo interferenceNo interferenceNo interferenceNo interference

SGD 146.49

1 Piece(s) 8 Day(s) 10General Steel[○] / Heat-Treated Steel[○] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○]15--For General Steel (AlCrN etc.)1010052Side Surface / Groove-[IKOU] 37 to 404560295088382698-5751CarbideManufacturer standard product4StandardUnequal lead / unequal division-UT coat-0.03 to 09.82--------

SGD 151.55

1 Piece(s) 8 Day(s) 12General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Cast Iron[○] / Titanium[○] / Copper[◎]184Long Neck Square-129036Flat Surface / Side Surface / Groove / Inclined CuttingWith LeadStandard Helix (30 to 40°)-----------0~-0.0311.82-No interferenceNo interferenceNo interferenceNo interferenceNo interference

SGD 205.44

1 Piece(s) 8 Day(s) 12General Steel[○] / Heat-Treated Steel[○] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○]18--For General Steel (AlCrN etc.)1211062Side Surface / Groove-[IKOU] 37 to 404560295088399698-5769CarbideManufacturer standard product4StandardUnequal lead / unequal division-UT coat-0.03 to 011.82--------

Loading...

  1. 1

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)