(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

  • Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 15/12/2024 to 6:00 (SGT) 16/12/2024. We apologize for the inconvenience.
  • Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

X Coated 2-Flute Long Neck End Mill (For deep rib) NHR-2X (NHR-2X-1.4-6)

Part Number

Configured Part Number is shown.

NHR-2X-1.4-6

Configured Specifications

Blade diameter (D)(φ)1.4work materialGeneral Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]
Blade length (ℓ)(mm)2.1Number of flutes(sheet)2
TypeLong Neck SquareCoatingTiCN
Shank diameter (d)(mm)4Overall Length (L)(mm)45
Underneck length (ℓ1)(mm)6Machining ApplicationFlat Surface / Side Surface / Groove
Blade tip shapeWith LeadTorsion Angle (θ)Standard Helix (30 to 40°)
Show More
(d2)Under Neck Diameter(mm)1.35(γ) Neck Angle(°)12
Manufacturer Code01-00413-01406 - -
Show Less
Part Number
NHR-2X-1.4-6
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipBlade diameter (D)
(φ)
Blade length (ℓ)
(mm)
Shank diameter (d)
(mm)
Overall Length (L)
(mm)
Underneck length (ℓ1)
(mm)
Torsion Angle (θ) (d2)Under Neck Diameter
(mm)
Manufacturer Code

SGD 99.68

1 Piece(s) 6 Day(s) or more 1.42.14456Standard Helix (30 to 40°)1.3501-00413-01406
Part Number
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipBlade diameter (D)
(φ)
Blade length (ℓ)
(mm)
Shank diameter (d)
(mm)
Overall Length (L)
(mm)
Underneck length (ℓ1)
(mm)
Torsion Angle (θ) (d2)Under Neck Diameter
(mm)
Manufacturer Code
  1. 1

Basic Information

work material General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Stainless Steel / Aluminum / Copper Number of flutes(sheet) 2 Type Long Neck Square
Coating TiCN Machining Application Flat Surface / Side Surface / Groove Blade tip shape With Lead
(γ) Neck Angle(°) 12

Please check the type/dimensions/specifications of the part NHR-2X-1.4-6 in the X Coated 2-Flute Long Neck End Mill (For deep rib) NHR-2X series.

Similar Part Numbers

Part Number
NHR-2X-0.6-2
NHR-2X-0.6-4
NHR-2X-0.6-6
NHR-2X-1.4-8
NHR-2X-1.5-10
NHR-2X-1.5-12
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipBlade diameter (D)
(φ)
Blade length (ℓ)
(mm)
Shank diameter (d)
(mm)
Overall Length (L)
(mm)
Underneck length (ℓ1)
(mm)
Torsion Angle (θ) (d2)Under Neck Diameter
(mm)
Manufacturer Code

SGD 118.56

1 Piece(s) 6 Day(s) or more 0.60.93352Standard Helix (30 to 40°)0.5601-00413-00602

SGD 118.56

1 Piece(s) 6 Day(s) or more 0.60.93354Standard Helix (30 to 40°)0.5601-00413-00604

SGD 118.56

1 Piece(s) 6 Day(s) or more 0.60.93356Standard Helix (30 to 40°)0.5601-00413-00606

SGD 99.68

1 Piece(s) 6 Day(s) or more 1.42.14458Standard Helix (30 to 40°)1.3501-00413-01408

SGD 75.23

1 Piece(s) 11 Day(s) 1.52.344510Standard Helix (30 to 40°)1.4501-00413-01510

SGD 75.23

1 Piece(s) 11 Day(s) 1.52.344512Standard Helix (30 to 40°)1.4501-00413-01512
Part Number
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipBlade diameter (D)
(φ)
Blade length (ℓ)
(mm)
Shank diameter (d)
(mm)
Overall Length (L)
(mm)
Underneck length (ℓ1)
(mm)
Torsion Angle (θ) (d2)Under Neck Diameter
(mm)
Manufacturer Code

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)

Not a MISUMI customer yet? Register & enjoy 50% off your order!* (*T&C apply.)

We also deliver to:Philippines, Australia, New Zealand, Middle East region!