Linear Shafts（Heat Treatment：Induction Hardened Page2）

• 

  Linear Shafts-One End Threaded with Wrench Flats / Cross-Drilled Hole

  MISUMI

  [Features] A shaft (linear shaft, hardened shaft, guide shaft, slide shaft) with a male thread on one end, a drilled hole type, and a spanner groove type. L size standard expanded! You can now purchase from an even more complete lineup.

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Linear Shafts-One End Threaded with Undercut and Wrench Flats / Cross-Drilled Hole

  MISUMI

  [Features] Shafts (linear shafts, hardened shafts, guide shafts, slide shafts) with one end male screw relief groove, drilled hole type, and wrench groove type. L size standard expanded! You can now purchase from an even more complete lineup.

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Shafts - One End Threaded Hollow Shafts - One End Threaded Hollow Shafts with Wrench Flats / One End Threaded Hollow Shafts

  MISUMI

  "[Features] This shaft facilitates customers to arrange wiring, because the wire can be pierced into the inside of the shaft and contributes to weight saving of equipment, because the shaft is hollow."

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

• 

  Linear Shafts-One End Male Thread with Thread Dia. Equal to Shaft Dia.-

  MISUMI

  [Features] Shafts (linear shafts, hardened shafts, guide shafts, slide shafts) with male threads on one end and the same diameter. L size standard expanded! You can now purchase from an even more complete lineup.

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Linear Shafts - Keyway

  MISUMI

  [Features] Direct drive shafts (linear shafts, hardened shafts, guide shafts, slide shafts) are keyed type.

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Linear Shafts - Both Ends Stepped Hollow

  MISUMI

  "[Features] This shaft facilitates customers to arrange wiring, because the wire can be pierced into the inside of the shaft and contributes to weight saving of equipment, because the shaft is hollow."

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  [Clean & Pack] Shaft - Straight

  MISUMI

  Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
  This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

  ■Part Number for Clean & Pack Products

  ·Degreasing (Anti-rust single packing)	: Part Number SL-□□
  ·Precision cleaning (Degassing double packing)	: Part Number SH-□□
  ·Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

  Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
  SL-□□	Degreasing	Anti-rust packing	Oil removal	General environment	Regular assembly process
  					Post battery assembly process
  SH-□□	Precision cleaning	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
  					LCD-related post assembly process
  					In-vehicle camera assembly process
  SHD-□□	Electrolytic polishing + precision cleaning	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
  					Liquid crystal deposition process
  					Pre-OLED process

  ■Notes
  Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
  Please be careful about the application location and storage environment.

  CAD ：

  2D / 3D

  Days to Ship:	9 Day(s) or more

• 

  Shafts - Tapped Pilot Type

  MISUMI

  [Features] Direct drive shafts (linear shafts, hardened shafts, guide shafts, slide shafts) are female thread pilot type.

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

• 

  High Precision Linear Shafts - Stepped Ends / Stepped Ends with Wrench Flats - One End Threaded / Both Ends Threaded / One End Threaded / One End Tapped

  MISUMI

  [Features] Linear motion shafts (linear shafts, hardened shafts, guide shafts, slide shafts) with high perpendicularity accuracy (0.03) and guaranteed coaxiality of 0.02.One end stepped, one end male thread/both ends female thread/one end Male thread/one end female thread/with spanner groove.
  

  CAD ：

  2D / 3D

  Days to Ship:	7 Day(s) or more

• 

  Linear Shafts - One End Two Tapped Holes - Solid Type / One End Tapped Type / One End Stepped and Tapped Type / Threaded Type

  MISUMI

  [Features] Direct-acting shafts (linear shafts, hardened shafts, guide shafts, slide shafts) are female threaded 2-hole types.

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Linear Shafts - One End Threaded / One End Tapped Hollow

  MISUMI

  "[Features] This shaft facilitates customers to arrange wiring, because the wire can be pierced into the inside of the shaft and contributes to weight saving of equipment, because the shaft is hollow."

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

• 

  Linear Shafts - One End Stepped Hollow

  MISUMI

  "[Features] This shaft facilitates customers to arrange wiring, because the wire can be pierced into the inside of the shaft and contributes to weight saving of equipment, because the shaft is hollow."

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Linear Shafts-One End Stepped and Female Thread with Wrench Flats-

  MISUMI

  [Features] Shaft (linear shaft, hardened shaft, guide shaft, slide shaft) with a stepped female thread on one end and a spanner groove. L size standard expanded! You can now purchase from an even more complete lineup.

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  High Precision Linear Shafts - Both Ends Stepped and Tapped / Both Ends Stepped and Tapped with Wrench Flats

  MISUMI

  "[Features] Have a high accuracy in perpendicularity of shaft ends (0.03) and thus, are suitable for performing parts assembly that requires high accuracy."

  CAD ：

  2D / 3D

  Days to Ship:	7 Day(s) or more

• 

  High Precision Linear Shafts - One End Stepped, Both Ends Tapped / One End Stepped, Both Ends Tapped with Wrench Flats

  MISUMI

  "[Features] Have a high accuracy in perpendicularity of shaft ends (0.03) and thus, are suitable for performing parts assembly that requires high accuracy."

  CAD ：

  2D / 3D

  Days to Ship:	7 Day(s) or more

• 

  Precision Linear Shafts - One End Stepped and Male Thread One End Female Thread Type

  MISUMI

  [Features] Shafts (linear shafts, hardened shafts, guide shafts, slide shafts) with a stepped male thread on one end and a female thread on one end. L size standard expanded! You can now purchase from an even more complete lineup.

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Linear Shafts-One End Stepped and Tapped, One End Threaded / One End Stepped, One End Threaded

  MISUMI

  [Features] One end stepped, one end male thread type shaft (linear shaft, hardened shaft, guide shaft, slide shaft). L size standard expanded! You can now purchase from an even more complete lineup.

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Linear Shafts - Set Screw Grooved

  MISUMI

  [Features] Linear shafts (linear shafts, hardened shafts, guide shafts, slide shafts) with grooves for set screws.

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

• 

  Linear Shafts - One End Stepped / One End Tapped Hollow

  MISUMI

  "[Features] This shaft facilitates customers to arrange wiring, because the wire can be pierced into the inside of the shaft and contributes to weight saving of equipment, because the shaft is hollow."

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  High Precision Linear Shafts - Both Ends Threaded / Both Ends Threaded with Wrench Flats

  MISUMI

  [Features] Linear motion shafts (linear shafts, hardened shafts, guide shafts, slide shafts) with high perpendicularity accuracy (0.03) at the shaft end and guaranteed coaxiality of 0.02. Male threads on both ends/male threads on both ends with spanner grooves. .

  CAD ：

  2D / 3D

  Days to Ship:	7 Day(s) or more

• 

  High Precision Linear Shafts - Both Ends Threaded with Undercuts / Both Ends Threaded with Undercuts and Wrench Flats

  MISUMI

  [Features] High squareness accuracy (0.03) at the shaft end and guaranteed coaxiality of 0.02 for linear motion shafts (linear shafts, hardened shafts, guide shafts, slide shafts) with male thread relief grooves on both ends/with male thread relief grooves on both ends It is a type with a spanner groove.

  CAD ：

  2D / 3D

  Days to Ship:	7 Day(s) or more

• 

  MiSUMi Economy

  Linear Shafts One End Stepped, Both Ends Tapped/One End Tapped

  MISUMI

  CAD ：

  2D / 3D

  Days to Ship:	7 Day(s)

• 

  Linear Shaft, Straight Type, NS Series

  OZAK

  [Features]
  · Hard chrome plating SUJ-2 straight overall length standard shaft.
  · Can be delivered cut to any arbitrary length you like.
  
  [Note]
  In the manufacturer catalog, specified measurement orders have a "C" in the model number,
  but on the MISUMI WEB site, no "C" is included, and you can order both fixed measurement and custom measurement products with the same model number.

  Days to Ship:	12 Day(s) or more

• 

  Linear Shafts - Both Ends Threaded Hollow

  MISUMI

  "[Features] This shaft facilitates customers to arrange wiring, because the wire can be pierced into the inside of the shaft and contributes to weight saving of equipment, because the shaft is hollow."

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

• 

  Linear Shafts - Continuous Support - Pre-Drilled and Tapped

  MISUMI

  [Features] Multiple taps can be added to the shaft surface.

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

• 

  High Precision Linear Shafts - One End Stepped and Tapped / One End Stepped and Tapped with Wrench Flats

  MISUMI

  "[Features] Have a high accuracy in perpendicularity of shaft ends (0.03) and thus, are suitable for performing parts assembly that requires high accuracy."

  CAD ：

  2D / 3D

  Days to Ship:	7 Day(s) or more

• 

  Linear Shafts-Both Ends Threaded with Undercuts and Wrench Flats / Cross-Drilled Hole

  MISUMI

  [Features] Shafts (linear shafts, hardened shafts, guide shafts, slide shafts) with male screw relief grooves on both ends, drilled hole type, and wrench groove type. L size standard expanded! You can now purchase from an even more complete lineup.

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Precision Linear Shafts - Both Ends Male Thread with Undercut

  MISUMI

  [Features] Shafts (linear shafts, hardened shafts, guide shafts, slide shafts) with male screw relief grooves on both ends. L size standard expanded! You can now purchase from an even more complete lineup.

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  High Precision Linear Shafts - One End Threaded One End Tapped with Undercut / One End Threaded One End Tapped with Undercut and Wrench Flats

  MISUMI

  "[Features] Have a high accuracy in perpendicularity of shaft ends (0.03) and thus, are suitable for performing parts assembly that requires high accuracy."

  CAD ：

  2D / 3D

  Days to Ship:	7 Day(s) or more

• 

  [Clean & Pack] Shaft - Both Ends Tapped

  MISUMI

  Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
  This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

  ■Part Number for Clean & Pack Products

  ·Degreasing (Anti-rust single packing)	: Part Number SL-□□
  ·Precision cleaning (Degassing double packing)	: Part Number SH-□□
  ·Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

  Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
  SL-□□	Degreasing	Anti-rust packing	Oil removal	General environment	Regular assembly process
  					Post battery assembly process
  SH-□□	Precision cleaning	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
  					LCD-related post assembly process
  					In-vehicle camera assembly process
  SHD-□□	Electrolytic polishing + precision cleaning	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
  					Liquid crystal deposition process
  					Pre-OLED process

  ■Notes
  Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
  Please be careful about the application location and storage environment.

  CAD ：

  2D / 3D

  Days to Ship:	9 Day(s) or more

• 

  Shafts -One End Two Female Thread Holes Type-

  MISUMI

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Linear Shafts-One End Stepped, Both Ends Female Thread with Wrench Flats-

  MISUMI

  [Specification expansion] In response to many requests, a new spanner grooved type with a stepped end and a female thread on one end is now available!

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  High Precision Linear Shafts - One End Threaded with Undercut / Wrench Flats

  MISUMI

  [Features] Linear motion shafts (linear shafts, hardened shafts, guide shafts, slide shafts) with high perpendicularity accuracy (0.03) and guaranteed coaxiality of 0.02. One end has a male screw relief groove/spanner groove. .

  CAD ：

  2D / 3D

  Days to Ship:	7 Day(s) or more

Loading...