Silicone Rubber Heater Width x Length 50 x 50–300 x 500
Part Number: 1-130-04

In the form of a thin sheet, it is extremely thermo-responsive (standard type 1.5 mm). Features flexibility. Not affected by high humidity or corrosive environments (weather and chemical resistant product). Though this product is applicable to the 0.6-0.8 W/cm² power density of many normal uses, there may be large fluctuations attributable to the state of the heater installation and the temperature control method.

Specifications of 1-130-04

• Product Type

  Heater

• Length(mm)

  200

• Width(mm)

  50

• Product Name

  Silicone Rubber Heater 50x200

• Maximum Temperature(°C)

  250

• Normal temperatures(°C)

  200

• Rated Voltage(V)

  AC100V

• Lead Wire Length(mm)

  300

• Electrical characteristics

  Capacity tolerance ±10%, insulation resistance value 100 MΩ at min./ 500 VDC, withstand voltage 1,500 V 1 min.

• Electric Power Density(W/cm²)

  0.6

• Features

  This product is formed into a thin sheet for excellent heat responsiveness (standard type 1.5 mm). This product is pliable, and is not affected by high humidity or corrosive environments (weather and chemical resistant product). This product is applicable to 0.6 to 0.8 W/cm² power density for many normal uses, but there may be large fluctuations due to the heater attachment state and temperature control method.

• Footnotes

  When using the product, keep it close to the object to be heated. As it is not equipped with a self-temperature control system, attach a temperature controller etc. depending on the conditions to strictly keep the surface temperature at 200°C or lower. It is not waterproof, so do not immerse in liquid.

Please check the type/dimensions/specifications of the part 1-130-04 in the Silicone Rubber Heater Width x Length 50 x 50–300 x 500 series.