(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

  • Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 15/12/2024 to 6:00 (SGT) 16/12/2024. We apologize for the inconvenience.
  • Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

Ceramic Limited Stopper Gauge H7 (for Construction Work) (CLP11-H7)

Ceramic Limited Stopper Gauge H7 (for Construction Work) CLP11-H7

Click this image to zoom it.

Move the mouse over the image to zoom

  • Ceramic Limited Stopper Gauge H7 (for Construction Work)
  • Ceramic Limited Stopper Gauge H7 (for Construction Work)

Ceramic plug gauge has excellent durability that eliminates concerns about rust and corrosion on the measurement surface, and is exceptionally workable and economical.
[Features]
· A pair of gauges with external dimensions based on the maximum and minimum allowable dimensions as references.
· Can be used for obtaining fit compatibility between the hole and the shaft.
· Material with exceptional wear resistance in comparison with steel, which strongly resists changes over time.
· No concerns about rust or corrosion on the measurement surface, with extremely simple maintenance and management after use.
· Material with a thermal expansion coefficient almost identical to steel. Measurement surface is nonmagnetic material that will not become magnetized.
· There is little change in plasticity due to scratches or dents and there are no burrs or bulges.
· Includes an inspection results chart.
[Applications]
· Used for hole diameter inspections.

PDF

Japanese Only

Part Number

Configured Part Number is shown.

CLP11-H7

What is limit plug gauge

The gauge has two ends with standard maximum and minimum tolerable size of the hole.


Instructions for use

  • GOGO side ( can pass through the whole holes smoothly)
    The GO side is used to check if the diameter of the hole which is bigger than the
    maximum entity size【minimum tolerable size of the hole】, the gauge can go
    through the hole completely.
  • NO-GO side (can not pass through the hole)
    The NO-GO side is used to check if the diameter of the hole is smaller than the minimum
    entity size【maximum tolerable size of the hole】, the gauge can notgo into the hole.
 
What is entity size
The volume of hole is the minimum when the 
hole is finished with minimum tolerable size. 
Therefore, the other volume except the hole 
(this is entity size, the right drawing with slanted 
portion) is the maximum, that is the maximum 
entity size. The opposite meaning of above 
mention is the minimum entity size.

  • Grade / same with the tolerance of the hole, plug gauge also has H6~H10.
    The smaller the number the more precise it is.
  • Hardness / HV600~780
*Make sure there is no error on the grade.
Vickers hardness (HV):Press the square pyramid shape diamond indenter against the
surface of the material to do indentation hardness test.

Precautions before use

  • Make sure the tip of plug gauge
    without any burrs.
  • Burrs may hurt the hole.

Precaution after use

  • Remove all dust and fingerprints
    then apply anti-rust oil.
  • Keep it at a place with small changes
    in humidity and temperature.
 

Example for use

Part Number
CLP11-H7
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipNominal

SGD 381.53

1 Piece(s) 11 Day(s) φ11

Loading...

  1. 1
 

Basic Information

Product Model Limit Plug Gauge Material Gauge Part: Ceramic, Shank Part: Aluminum Features · A pair of gauges with an external shape design based on maximum tolerance measurements and minimum tolerance measurements in order to achieve compatibility for engagement of slots and shafts. · Features exceptional abrasion resistance in comparison to steel and is a material that strongly resists change over time. · No need to worry about rust or corrosion on measurement surface, with extremely simple maintenance and management after use. There is little impact from temperature, as thermal expansion coefficients are small. · No need to worry about the measurement surface becoming magnetically charged, as it is made of non-magnetic material. · There is little change in plasticity due to scratches or dents and there are no burrs or bulking.
Use Hole Diameter Inspection

Please check the type/dimensions/specifications of the part CLP11-H7 in the Ceramic Limited Stopper Gauge H7 (for Construction Work) series.

Similar Part Numbers

Part Number
CLP10-H7
CLP12-H7
CLP13-H7
CLP14-H7
CLP15-H7
CLP16-H7
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipNominal

SGD 325.36

1 Piece(s) 11 Day(s) φ10

SGD 381.53

1 Piece(s) 11 Day(s) φ12

SGD 465.79

1 Piece(s) 11 Day(s) φ13

SGD 465.79

1 Piece(s) 11 Day(s) φ14

SGD 493.88

1 Piece(s) 11 Day(s) φ15

SGD 493.88

1 Piece(s) 11 Day(s) φ16

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)