Crank Pulley Holder
Part Number: AE701

This is a crank pulley stopper compatible with various shapes.

[Applications]
· This tool is used mainly to remove or mount the crank pulley for vehicles with vertically-mounted engines (FR vehicles) (when replacing the timing belt, replacing the oil seal, or overhauling the engine, etc.).
The Crank Pulley Double Power Wrench (AE-10) can also be used when loosening the crank pulley lock bolt.
* The Crank Pulley Puller Manual Type (AE702) or Hydraulic Type (CPU13) is required to remove the crank pulley.
[Scope]
· Suitable mainly for vertically-mounted engines (FR vehicles), especially Toyota JZ series and 1G Series, Nissan RB Series, VG Series and VQ Series (diesel engines are excluded).
· This tool is dedicated for V-ribbed belts.
· Pulley outer diameter: ø90 to 180
/ With service tap: Compatible with M6 and M8
[Features]
The tool is easy to mount.
· Just mount the rotary claw onto the crank pulley grooves and screw in the grip. (The center slider can be positioned simultaneously while mounting onto the crank pulley.)
The thin design is just 45 mm thick.
· There is no need to remove the radiator or condenser during work. (Excluding some models)

Specifications of AE701

• Product Type

  Engine Related

• Overall Length(mm)

  Holder main body: 300 to 415

• Width(mm)

  42

• Set Content

  Crank pulley holder (main body), pin, set bolt (with hex socket) for pin, set bolt (with hex socket), washer

• Mass(g)

  3,900

Please check the type/dimensions/specifications of the part AE701 in the Crank Pulley Holder series.