Interface Terminal Blocks (Round/Y Terminal Types)（Supported equipment manufacturer：Mitsubishi Electric）

• • On Sale Till 31/03/2025

  

  Terminal Block, PCN Series

  TOYOGIKEN

  [Features]
  ·The width of the main body is 40 mm compared to the width of the DIN rail of 35 mm.
  · Boasts an even slimmer finish.
  · The terminal block and connector are connected on the circuit board, helping prevent mis-wiring.
  · The terminal number and connector number are wired 1-to-1.
  · Circuits can be freely designed.
  ·Workability is further improved by adopting a new screw method.
  ·If you use a fork type terminal, the PCN series is definitely advantageous.
  · A lever type which enables neat and tidy removal from rails.
  · No tools required for removal, and so no need for wasted space on the backside of the main body.
  · Compatible with both rail mounting and direct mounting.
  ·Equipped with support screw (dedicated Y-shaped crimp terminal).
  ·The terminal screw has a fall-prevention structure and the washer is floating, which saves labor-hours for connection work.
  ·It can be easily attachment/removal from the IEC 35 mm rail by the lever method, and no tools are required.

  • Volume Discount

  CAD ：

  2D

  Standard Price:	SGD 39.01-
  	Special Price
  Days to Ship:	4 Day(s) or more

• 

  PLC Connector Terminal Block (for Mitsubishi Electric PLC, Input/Output), Weight: 150 g

  MISUMI

  This is a PLC connector terminal block compatible with Mitsubishi Electric PLC circuits, greatly reducing wiring labor-hours and allowing lower stage wiring without upper stage terminal wiring getting in the way.

  • Volume Discount

  • Connection in Boards
  • Space-saving
  • PLC
  • 125 V

  Standard Price:	SGD 55.95
  Days to Ship:	4 Day(s) or more

• 

  Interface Terminal Block, Slim Type Terminal Block, 7 mm Pitch

  PATLITE (KASUGA)

  A 7-mm pitch interface terminal block that uses a full-cover structure that does not expose the circuit board, and is designed with safety in mind.
  [Features]
  ・ The cover is openable and can be fixed at any position
  ・ Compared to the conventional TIFA7 Series, it is a series that reduces the installation space by approx. 12% pursuing further space saving
  ・ Standard-product connector is Hirose Electric MIL connector (Ribbon cable connector)
  ・ OMRON MIL connector and Fujitsu F360 series connector (input/output connector for circuit board) can also be mounted
  [Applications]
  ・ Ideal for PLC (programmable controller) and computer interface

  • Volume Discount

  CAD ：

  2D

  Standard Price:	SGD 52.61
  Days to Ship:	4 Day(s) or more

• 

  MWS Series (Spring-Loaded), Compatible Crimp Terminals Y terminal/Round terminal

  MISUMI

  A 34-position MIL connector terminal block equipped with a KV-Nano series name plate that reduces work labor-hours thanks to its spring-loaded structure, allowing lower stage wiring without upper stage terminal wiring getting in the way.

  • Volume Discount

  • Connection in Boards
  • Space-saving
  • PLC
  • 125 V

  CAD ：

  2D

  Standard Price:	SGD 25.03-
  Days to Ship:	Same day or more

• 

  PLC Connector Terminal Block (for Mitsubishi Electric, Input/Output) FCN/MIL

  MISUMI

  A spring-loaded terminal block that can be directly connected to the circuit of a Mitsubishi Electric PLC. It is an input/output PLC connector terminal block allowing lower stage wiring without upper stage terminal wiring getting in the way.

  • Volume Discount

  • Connection in Boards
  • Space-saving
  • PLC
  • 125 V

  CAD ：

  2D

  Standard Price:	SGD 38.09-
  Days to Ship:	4 Day(s) or more

• 

  MWI Series (Terminal Pitch 7 mm), Compatible Crimp Terminals: Spade

  MISUMI

  This is a terminal block equipped with a MIL socket connector, allowing lower stage wiring without upper stage terminal wiring getting in the way. You can choose a machine name plate. Every 6th bulkhead shape and a triangle mark support number recognition.

  • Volume Discount

  • c-UL
  • Space-saving
  • Sensor
  • PLC
  • 125 V

  CAD ：

  2D

  Standard Price:	SGD 37.57
  Days to Ship:	4 Day(s) or more

• 

  Terminal Block, PCN7 Series

  TOYOGIKEN

  An ultra small size with a pitch between terminals of just 7 mm. Ideal for size reducing PLC or SBC interfaces. A compact type for helping reduce the size of control panels.
  
  [Features]
  · An ultra small size with a pitch between terminals of just 7 mm.
  · Ideal for size reducing PLC or SBC interfaces.
  · A compact type for helping reduce the size of control panels.
  · The connector and terminal block are easy-to-handle 1:1 wire connection types.
  · Uses SS terminal screws for easy wiring.
  · Structured to prevent screws from dropping out and becoming lost.
  · The terminal is an open/close type and is pre-equipped with a name plate featuring the terminal number on both sides. Designed for greater efficiency during wiring.
  · Compatible with both DNI rail mounting and direct mounting methods.

  • Volume Discount

  CAD ：

  2D

  Standard Price:	SGD 32.52-
  Days to Ship:	4 Day(s) or more

• 

  MWS Series (Spring-Loaded), Mounting Method: DIN Rail / Direct Mount

  MISUMI

  A terminal block equipped with an FCN 40-core connector that reduces work labor-hours thanks to its spring-loaded structure, allowing lower stage wiring without upper stage terminal wiring getting in the way.

  • Volume Discount

  • Connection in Boards
  • Space-saving
  • PLC
  • 125 V

  Standard Price:	SGD 49.83
  Days to Ship:	4 Day(s) or more

• 

  Connector Terminal Block, PCI Series, Crimp Terminal Type

  TOYOGIKEN

  [Features]
  · The PCI series is compatible with the main Mitsubishi and OMRON sequencers (forDC5V to 24V).
  · A slim design with a main body width of just 40 mm. For use with 35 mm wide DIN rails.

  • Volume Discount

  Standard Price:	SGD 61.37
  Days to Ship:	4 Day(s) or more

• 

  +com PLC connector terminal block (for Mitsubishi Electric input/output)

  MISUMI

  [New Product] 8 pole + 32 PLC signal common terminal block incorporated into a 40 pole terminal block

  • Volume Discount

  • Connection in Boards
  • Space-saving
  • PLC
  • 125 V

  CAD ：

  2D

  Standard Price:	SGD 47.13-
  Days to Ship:	4 Day(s) or more

• 

  MWI Series (Ultra Small)

  MISUMI

  [Specifications]·A 45 mm × 55 mm space saving connector terminal block

  • Volume Discount

  • c-UL
  • For Signal
  • Space-saving
  • Sensor
  • PLC

  Standard Price:	SGD 63.04
  Days to Ship:	4 Day(s) or more

• 

  MWI series (7mm pitch between terminals), terminal block screw type: Self-up

  MISUMI

  MDR connector-equipped terminal block with 7 mm pitch between terminals

  • Volume Discount

  • AC Servo
  • 125 V

  CAD ：

  2D

  Standard Price:	SGD 94.51
  Days to Ship:	4 Day(s) or more

• 

  Connector Terminal Block Conversion Unit XW2R (PLC Connection Type)

  OMRON

  Connector terminal block conversion units designed specifically to connect PLCs.
  [Features]
  ・ The wiring pattern specialized for PLC connection has reduced the trouble of checking the signal layout
  ・ The name paper of the terminal block will be the PLC address
  ・ Connection method is cross-head screw type, straight-slot screw type, push-in type
  ・ Available with and without power supply terminal
  ・ The operability of the push-in terminal has been improved, making it even easier to use
  ・ Connection work has become smoother with a terminal arrangement that takes workability into consideration
  ・ It can be mounted with DIN rail and screws
  ・ With a common design, it can be customized
  ・ The ribs for screw mounting are designed to dive into the DIN rail so that they do not interfere with DIN rail mounting parts or end plates
  ・ Of course, even if XW2Rs are connected to each other, they will be placed without any interference
  [Applications]
  ・ Convert various input devices such as sensors into connectors and use them for PLC input

  Standard Price:	SGD 54.40
  Days to Ship:	4 Day(s) or more

Loading...