Square Connectors（Applicable pin/contact：Male (plug) Page2）

• 

  Solderless D-Sub Connector IM-DS2059 (Dedicated for Single Wires)

  WAGO

  [Features]
  ・ No need for troublesome soldering work.
  ・ You can easily make a D-Sub cable by inserting a single wire.

  Standard Price:	SGD 42.74-
  Days to Ship:	7 Day(s) or more

• 

  Misumi, Waterproof, E-Model Connector (Crimp Wire Connection)

  MISUMI

  [Features]MISUMI's original, low-cost, environment-resistant, and waterproof E-type connector. It is a highly reliable crimp connection that can shorten the work time. Fully compatible with products from major connector manufacturers. Please check the male or female before ordering.

  • Volume Discount

  • UL
  • IP65
  • For Power Supply
  • For Signal
  • Connection between Boards
  • Connection in Boards
  • Screw Type
  • Insertion
  • 2DCAD
  • Silver-Plated

  CAD ：

  2D

  Standard Price:	SGD 18.66-
  Days to Ship:	4 Day(s) or more

• 

  Solder and Machine Contact D-Sub Connector (High Current)

  MISUMI

  Made by ERNI in Germany. High-current capacity model supporting up to 20 A

  • Volume Discount

  • For Power Supply
  • Connection between Boards
  • Solder
  • Gold Plated
  • Screw Lock

  CAD ：

  2D

  Standard Price:	SGD 9.10-
  Days to Ship:	4 Day(s) or more

• 

  IEEE1284 Half Pitch EMI Countermeasure Press-fit Male Connector

  MISUMI

  High-speed Transfer Supporting Pressure Welding Half-pitch I/O Connector

  • Volume Discount

  • For Signal
  • PLC
  • Motor
  • EMI Countermeasure
  • SCSI
  • Pressure Welding
  • Gold Plated
  • Screw Lock
  • One-Touch Lock

  CAD ：

  2D

  Standard Price:	SGD 7.71-
  Days to Ship:	4 Day(s) or more

• • On Sale Till 31/03/2025

  

  1.27‑mm Pitch Two-Piece Connectors, HIF6 Series

  HIROSE ELECTRIC

  Board-to-board and board-to-cable connection variations available. Uses a flat-type cable with 1.27-mm pitch, so it can be used with each type of connector.
  
  [Features]
  ・Product variation: connection methods include board-to-board model and cable pressure connection.
  ・Wide range of use: using flat-type cable with 1.27-mm pitch, it can be used with HIF2E, HIF3B, HIF5, etc.
  ・Compatible cables: AWG#28 flat cable (7/0.127 mm, outer diameter 0.8 - 1.0 mm).
  ・Construction that prevents mis-insertion: mis-insertion prevention guide prevents accidental insertion.

  • Volume Discount

  Standard Price:	SGD 2.42-
  	Special Price
  Days to Ship:	4 Day(s) or more

• 

  Discrete Wire for Connection, DF1E Series (2.5 mm Pitch)【1-100 Pieces Per Package】

  HIROSE ELECTRIC

  A board-to-cable, cable-to-cable connector with a lock (2.5-mm pitch). The inner locking type mechanism prevents the connector from disconnecting due to impact.
  In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

  Standard Price:	SGD 1.27-
  Days to Ship:	3 Day(s) or more

• 

  Discrete Wire Connector for Connection, DF3 Series (2 mm Pitch)【1-100 Pieces Per Package】

  HIROSE ELECTRIC

  Connector for board-to-cable, cable-to-cable, and board-to-board connections with 2-mm pitch 1 terminal row. Can use for a wide range of equipment.
  In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

  Standard Price:	SGD 0.55-
  Days to Ship:	3 Day(s) or more

• 

  D-Sub Connector (Straight Board-Mounted Type), SD Series

  HIROSE ELECTRIC

  A straight circuit board mounting type D-sub connector. Usable with each type of D-sub connector.
  
  [Features]
  · Has a metal shell and so has a small and lightweight connector.
  · The terminal contact portion is gold-plated, the circuit board mounting side is gold flash/tin-plated, and it excels at effectively reducing metal.
  · Affixed perpendicularly on a printed circuit board for high-density mounting, and highly useful for connecting to cable plugs.
  · With dip soldering (HD type), crimping (CD type), and ribbon pressure connecting (FD type), this product can be used with a variety of models.
  · The insulation material is heat resistant and uses the excellent PBT resin (UL94V-0)containing glass.

  Standard Price:	SGD 4.77-
  Days to Ship:	4 Day(s) or more

• • On Sale Till 31/03/2025

  

  Right Angle Type Connector RD*D Series

  HIROSE ELECTRIC

  These D-sub connectors are right-angle board-mounted types. Their lock mechanisms are selectable, and they can be combined with any type of D-sub plug.
  
  [Features]
  · Has a metal shell and so has a small and lightweight connector.
  • They are integrated with RD-type molds and are of simple construction.
  • They install directly in parallel to the PCB and mount at high density, making connection to cable plugs extremely convenient.
  • The connection and the board mounting areas are metal plated.
  • Enables a variety of assembly techniques, including dip soldering (HD type), crimping (CD type), and ribbon pressure contact (FD type).
  • A UL synthetic resin that is heat and chemical resistant, and is used as the insulating material.
  • Various accessories can be employed to allow these connectors to be used in different applications.

  Standard Price:	SGD 7.54-
  	Special Price
  Days to Ship:	4 Day(s) or more

• 

  D-Sub Connector (Ribbon Cable IDC Termination, Low-Profile), FDD Series

  HIROSE ELECTRIC

  A ribbon/cable crimp connection type D-sub connector. Low height on the wiring side helps save space within the set.
  
  [Features]
  • Metal shell makes it compact and sturdy.
  • Connectors can be mounted on the chassis, or on the front or back sides of the panel.
  • Height of the wiring side is greatly reduced to facilitate more compact sets.
  · The structure uses a piece of metal to secure the ribbon cable holding plate and is thus able to provide a strong securing force to secure the cable reliably.
  • Standard 1.27 mm-pitch ribbon cable can also be pressure-contact connected by replacing the tool when the pitch is something other than the 1.38-mm pitch of the D-sub. (Note that in such cases, a tool that slits cable will be needed.)
  • Discrete cables can also be pressure-contact connected by using a multi-core cable pressure-contact device.

  Standard Price:	SGD 8.11-
  Days to Ship:	4 Day(s) or more

• 

  CD Type, Crimp Type Connector, CD Series【1-100 Pieces Per Package】

  HIROSE ELECTRIC

  A crimped wire connection type D-sub connector. The cable can be connected to #20–28 AWG (using two types of terminal pins).
  
  [Features]
  · Has a metal shell and so is small and lightweight.
  · Connector mounting can be performed on the chassis, front or back, or one of the sides.
  · The attaching and detaching of the terminals is done by pressing the retainer sideways. Therefore, no special extraction tool is required.
  · The insulator uses a UL material synthetic resin with excellent heat-resistant, chemical-resistant properties.
  In-stock items are custom products, therefore returns and cancellations are not possible. Thank you. Returns and cancellations are not possible. Thank you for your understanding.

  Standard Price:	SGD 4.05-
  Days to Ship:	4 Day(s) or more

• 

  Half-Pitch Multi-Function 2-Piece Connector, FX2 Series

  HIROSE ELECTRIC

  Combination offers various connections for board-to-board (stacking, horizontal, vertical) and ribbon cable connections.

  Standard Price:	SGD 3.05-
  Days to Ship:	4 Day(s) or more

• 

  Half Pitch Interface Connector, DXM Series, Rectangular

  HIROSE ELECTRIC

  This is a 1.27-mm pitch I/O connector (general purpose type). A wide variety is available to suit different applications.

  Standard Price:	SGD 9.28-
  Days to Ship:	4 Day(s) or more

• 

  IL-AG5 Series

  JAPANAVIATION

  [Features]
  · Mechanical lock structure for secure mating.
  · The locking method of the mechanical lock is strongly resistant to impact and pulling. By simply pushing in the plug, a distinct click sound accompanies the mating. Therefore, the successful mating can be confirmed when connecting to non-visible parts.
  · Unique housing structure.
  · The mating is highly reliable. The unique housing structure has protrusions and incorrect insertion prevention guides, which prevent adverse effects due to twisting when disconnecting.
  · The double locking structure securely prevents contact dropout.
  · The socket housing contact retainer uses a primary lock employing a contact lance and a secondary lock employing a flap that is integrated into the housing in two places. This provides a highly reliable double locking structure, which prevents contact dropout due to impacts or vibration.
  · The flap is mounted so as to push on the contact, temporarily locking the contact to prevent incomplete insertion.
  · Standard, and differently shaped incorrect insertion prevention types are available.
  · The fitting element conformation and color (standard type: green/incorrect insertion prevention type: light blue) differ from the standard type. Therefore, the product is ideally suited for configurations that incorporate two connectors side-by-side in identical numbers.
  · Contact featuring highly reliable design.
  · Box type, which is resilient to external effects such as deformation due to external forces.
  · Two-ply spring structure with excellent contact element characteristics.
  · The primary lance is on the inside of the contact provides horizontal insertion prevention.
  · Structure prevents reverse, horizontal insertion during housing mounting.

  Standard Price:	SGD 1.20-
  Days to Ship:	3 Day(s) or more

• 

  3M^TM Miniature Delta Ribbon (MDR) System Board Mounting Plug

  3M

  [Features]
  · Half-pitch I/O connector "Industry Standard Product" MDR system.
  · Low insertion removal force and torsion countermeasures through use of pre-force style cantilever contact ensures high reliability.
  ▪ EMI/ESD countermeasure items.
  · Tough structure based on a die-cast lock stand.
  · Has M2.5 screws compatible with ISO standard and US industrial standard #4-40 screws available for mounting screw sizes.
  · Products equipped with a ground lock are available to streamline the pre-soldering of temporary mountings and ground processing.
  · Reverse types are also available for providing greater freedom in mechanical design and implementation.

  Standard Price:	SGD 14.51-
  Days to Ship:	3 Day(s) or more

• 

  Han-Modular Series Modules【1-2 Pieces Per Package】

  HARTING

  It is possible to save space used by connectors by selecting the modules to suit the operating environment (Models are separated using "-" rather than spaces).

  • Volume Discount

  Standard Price:	SGD 9.95-
  Days to Ship:	4 Day(s) or more

• 

  CK / CKS Small Screw Type and Spring Type 10A / 250 V Insert

  ILME

  CK / CKS Small screw type / spring type, 10A / 250 V, Insert
  
  [Features]
  ・CK/CKS.
  ・Small screw type / spring type.
  ▪ 10A/250 V insert

  Standard Price:	SGD 7.13-
  Days to Ship:	3 Day(s) or more

• 

  MIXO Modular Insert & Contact

  ILME

  [Features]
  · MIXO.
  · MIXO modular inserts and contacts.
  · Supports large currents up to 200 A, high voltage up to 5, 000 V, high density, air piping, LANs, and USBs.
  · Supports optical fiber, coaxial, and Dsub9Pin connectors.

  Standard Price:	SGD 4.39-
  Days to Ship:	3 Day(s) or more

• 

  [Ilme Insert]CDD 10 A/250 V High Density Crimp Type

  ILME

  [Features]
  ・ This is a standard Series of general-purpose Ilme’s connectors.
  ・ It can be used with higher density and space-saving wiring.
  ・ Normally, it can be used up to 250 V, but it can be used at higher voltage (500 V) by reducing the number of contact pins used and
  arranging it properly.

  Standard Price:	SGD 13.21-
  Days to Ship:	3 Day(s) or more

• 

  Han Waterproof EE Connector (Weld-Wire Connection)

  MISUMI

  EE Connector

  • Volume Discount

  • UL
  • CSA
  • VDE
  • For Power Supply
  • For Signal
  • Waterproof
  • Crimp Terminal
  • Lever Lock
  • Silver-Plated

  CAD ：

  2D

  Standard Price:	SGD 34.18-
  Days to Ship:	4 Day(s) or more

• 

  Misumi, Waterproof, E-Model Connector (Screw Wire Connection)

  MISUMI

  [Features]MISUMI's original, low-cost, environment-resistant, and waterproof E-type connector. Due to cable connection by screws, it can be easily connected with just a slotted screwdriver without the need for dedicated tools. The screw connection is equipped with a contact. Please confirm the type and male or female before ordering.

  • Volume Discount

  • UL
  • IP65
  • For Power Supply
  • For Signal
  • Connection between Boards
  • Connection in Boards
  • Screw Type
  • Insertion
  • 2DCAD
  • Silver-Plated

  CAD ：

  2D

  Standard Price:	SGD 16.12-
  Days to Ship:	4 Day(s) or more

• 

  Misumi, Waterproof, DD-Model Connector (Crimp Wire Connection)

  MISUMI

  [Features]MISUMI's original, low-cost, environment-resistant, and waterproof DD-type connector. It is a highly reliable crimp connection that can shorten the work time. A high-density connector that can be embedded in the Han-E series hoods and bases. Please check the male or female before ordering.

  • Volume Discount

  • UL
  • IP65
  • For Power Supply
  • For Signal
  • Connection between Boards
  • Connection in Boards
  • Screw Type
  • Insertion
  • 2DCAD
  • Silver-Plated

  CAD ：

  2D

  Standard Price:	SGD 20.39-
  Days to Ship:	4 Day(s) or more

• 

  MISUMI waterproof A type connector (screw type wire connection)

  MISUMI

  [Features]MISUMI's original, low-cost, environment-resistant, waterproof A-type connector. Screw connection type. Due to cable connection by screws, it can be easily connected with just a slotted screwdriver without the need for dedicated tools. Fully compatible with products from major connector manufacturers.

  • Volume Discount

  • UL
  • IP65
  • For Power Supply
  • For Signal
  • Connection between Boards
  • Connection in Boards
  • Screw Type
  • Insertion
  • Silver-Plated

  CAD ：

  2D

  Standard Price:	SGD 13.67-
  Days to Ship:	4 Day(s) or more

• 

  MISUMI waterproof D type connector (crimp-wire connection)

  MISUMI

  [Features]MISUMI's original, low-cost, environment-resistant, and waterproof D-type connector. Crimp connection type. Crimp connection that is highly reliable and allows for shorter work hours. Fully compatible with products from major connector manufacturers.

  • Volume Discount

  • UL
  • IP65
  • For Power Supply
  • For Signal
  • Connection between Boards
  • Connection in Boards
  • Screw Type
  • Insertion
  • Silver-Plated

  CAD ：

  2D

  Standard Price:	SGD 7.97-
  Days to Ship:	4 Day(s) or more

• 

  Pressure-welded/Press Contact D-Sub Connector

  MISUMI

  Pressure Welding model allows wires to be connected easily and strain-relieving mounting demonstrates strong tensile force

  • Volume Discount

  • For Signal
  • Connection between Boards
  • PLC
  • EMI Countermeasure
  • RS422
  • Pressure Welding
  • Gold Plated

  CAD ：

  2D

  Standard Price:	SGD 15.11-
  Days to Ship:	4 Day(s) or more

• • On Sale Till 31/03/2025

  

  MIL Press-fit Male Extension Connector

  MISUMI

  [Features]This is a male connector for IDC relay, manufactured by Hirose Electric. This is an IDC type connector that allows for batch IDC together with 1.27 mm pitch ribbon cable and wire-to-wire connection with MIL standard connectors (HIF3 B connectors). Since it has a locking mechanism after joining, it will not come off even if some pulling force is applied.

  • Volume Discount

  • UL
  • MIL
  • Caulking
  • Gold Plated
  • Lever Lock

  CAD ：

  2D

  Standard Price:	SGD 15.14-
  	Special Price
  Days to Ship:	Same day or more

• 

  MIL Connector PCB Straight Male Connector (BOX Model)

  MISUMI

  [Features]OMRON BOX type MIL straight male connector for circuit board mounting. It can be used for circuit boards of various factory automation equipment. Compared to circuit board mounting male connectors with levers, this connector is much smaller as it has no lever, making it very convenient for circuit board wiring in small devices. The widely used 2.54 mm pitch arrangement makes it compatible with commercially available universal circuit boards, etc.

  • Volume Discount

  • UL
  • MIL
  • Solder

  CAD ：

  2D

  Standard Price:	SGD 2.40-
  Days to Ship:	3 Day(s) or more

• 

  MIL Connector PCB Straight Male Connector (Lever Model)

  MISUMI

  [Features]Hirose Electric's lever-type, circuit board mount, MIL straight male connector. A wire-to-wire connector for OMRON KEYENCE PLC. It is a highly versatile circuit board connector that can be mounted on commercially available universal circuit boards, etc., as the circuit board mounting hole pitch is 2.54 mm. The pin direction is vertical to the circuit board surface. Since it has a lock mechanism at the time of connection, the connector can be securely connected and fixed.

  • Volume Discount

  • UL
  • MIL
  • For Signal
  • Solder
  • Gold Plated
  • Lever Lock

  CAD ：

  2D

  Standard Price:	SGD 3.13-
  Days to Ship:	Same day or more

• 

  Han Waterproof E-Model Connector (Screw Connection)

  MISUMI

  E Model Connector

  • Volume Discount

  • UL
  • CSA
  • CE-Compliant
  • For Power Supply
  • For Signal
  • Connection between Boards
  • Screw Type
  • Insertion
  • Silver-Plated

  CAD ：

  2D

  Standard Price:	SGD 22.00-
  Days to Ship:	Same day or more

• 

  Han Waterproof A-Model Connector (Screw Connection)

  MISUMI

  A Model Connector

  • Volume Discount

  • UL
  • CSA
  • CE-Compliant
  • For Power Supply
  • For Signal
  • Connection between Boards
  • Screw Type
  • Insertion
  • Silver-Plated

  CAD ：

  2D

  Standard Price:	SGD 19.05-
  Days to Ship:	4 Day(s) or more

• 

  Han Waterproof D-Model Connector (Crimped Connection)

  MISUMI

  D Model Connector

  • Volume Discount

  • UL
  • CSA
  • CE-Compliant
  • For Power Supply
  • For Signal
  • Connection between Boards
  • Caulking
  • Insertion
  • Silver-Plated

  CAD ：

  2D

  Standard Price:	SGD 11.53-
  Days to Ship:	4 Day(s) or more

• 

  Han Waterproof DD-Model Connector (Crimped Connection)

  MISUMI

  Waterproof DD type connector manufactured by HARTING.
  This is a high-density connector that can be incorporated into the hood or pedestal of the Han-E series.

  • Volume Discount

  • UL
  • CSA
  • CE-Compliant
  • For Power Supply
  • For Signal
  • Connection between Boards
  • Connection in Boards
  • Caulking
  • Insertion
  • Silver-Plated

  CAD ：

  2D

  Standard Price:	SGD 30.89-
  Days to Ship:	4 Day(s) or more

• 

  HA Series Slim Connector

  WEIDMULLER

  A slim type internal connector with which the wiring method can be selected (250 V, 22 A / 16 A, number of poles: 10 / 16 / 32 / 48 (+ PE))

  • Volume Discount

  Standard Price:	SGD 8.72-
  Days to Ship:	4 Day(s) or more

• 

  HKP Series

  HONDA TSUSHIN KOGYO

  2.54 mm pitch, straight, right angle through hole type connector.
  
  [Features]
  · Based on our original design, the contacts have provide highly reliable contact.
  · A wide range of connection combinations are possible from single circuit connections to multi-circuit connections.
  · Wire connection work is performed using a crimping machine that can perform wire connections for 3, 000 terminals/H and a hand tool for small lots is also available.
  · A UL-certified product is used as an insulator.
  · Reworking wiring mistakes is also simplified using the removal tool.
  ▪ Mating with FFC, MFC, HSC, DIC series is supported

  Standard Price:	SGD 3.89
  Days to Ship:	10 Day(s) or more

• 

  MRP Series Housings

  HONDA TSUSHIN KOGYO

  Housing for the MRP series.
  
  [Features]
  · Dual screw and a spring lock mechanism that can withstand any shock.
  · Dust-proof mechanism with excellent environmental resistance.
  · Optimal for device miniaturization via improvement of robustness, compactness, weight and density.
  · A relay type case is also provided

  Standard Price:	SGD 2.60-
  Days to Ship:	3 Day(s) or more

• • On Sale Till 31/03/2025

  

  1.25-mm Pitch Miniature Crimp Connector (UL Standard Certified Product), DF13 Series【1-100 Pieces Per Package】

  HIROSE ELECTRIC

  Connector for board-to-cable connection with 1.25-mm pitch. Choose from a number of variations from 2–40 pin, straight-mount, right-angle mount, DIP, and SMT.
  
  [Features]
  · Small.
  · A low-profile design with a mounting height of 5.8 mm. (The SMT mounting is a straight type, the DIP type is a straight 5.3-mm, and the right-angle type is 3.6-mm.)
  · Multipole
  · The dual-row type is a multipole connector with up to 40 pins. It is a high-density connector with a surface area of 30% compared to the single-row type.
  · Supports automatic mounting.
  · The header is available with a suction surface that supports vacuum suction . Therefore, automatic mounting using embossed packing is possible.
  · Complete basic functionality despite compact form factor.
  · The header includes a box structure to prevent twisting and ensure incorrect insertion is completely prevented.
  · Additionally, the Surface Mount (SMT) header is fitted with a reinforcement bracket to prevent solder from peeling.
  
  In-stock made-to-order products cannot be returned or canceled. Thank you for your understanding.

  Standard Price:	SGD 0.50-
  	Special Price
  Days to Ship:	3 Day(s) or more

• 

  1.25‑mm Pitch Low-Profile Type Crimp Connector, DF14 Series

  HIROSE ELECTRIC

  Connector for board-to-cable connection with 1.25-mm pitch. A low-profile type with a lower circuit board mounting height.
  
  [Features]
  · Thin type.
  · A dedicated right-angle connector to achieve a low-profile on top of circuit boards.
  · Circuit board mounting height: 2.5 mm.
  · This makes it possible to draw signals from places where there is no space between the circuit boards.
  · In addition, the profile of the offset type is lower than the board mounting height of 1.6 mm.
  · Supports automatic mounting.
  · The header has a vacuum absorption surface. Therefore, automatic mounting by embossed packing is possible.
  · Additionally, magazine packing is also available for the on-board type.
  · Four-walled type prevents socket from scraping the circuit board.
  · Header includes a box structure to prevent twisting to ensure incorrect insertion is completely prevented. Circuit board also includes walls to prevent damage caused by scraping when performing insertion and removal from the socket.
  · Additionally, a reinforcement bracket is included to prevent solder from peeling.
  In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

  Standard Price:	SGD 1.69
  Days to Ship:	3 Day(s) or more

• 

  1.78‑mm Pitch Rectangular Interface Connector QM Series

  HIROSE ELECTRIC

  Terminal opening and connection portion both possess a 1.78-mm pitch grid array, small size, and high density. Terminals are constructed with a ribbon shape, making them strong against prying and ensured for 1,000 insertions and extractions.
  
  [Features]
  · Terminal opening and connection portion both possess a 1.78-mm pitch grid array for use with small electric devices.
  · Terminals are constructed with a ribbon shape, making them strong against prying and ensured frequent insertions and extractions.
  · Able to be press welded when bunched with 0.89-mm (.35°) pitch cable (No.30 AWG) in an attempt to reduce work effort.
  · The dip connector, along with a construction that allows the grounding of electrical interference waves arising from the cable and connector on the circuit board surface, includes a circuit board snap stop.
  · The cover case is made of a die cast zinc amalgam effective in blocking electromagnetic waves, and a receptacle side bracket is included for effective noise reduction.
  · There are two types of cover case: hood type and lock (bevel opening) type. The lock type allows for single-action operation.

  Standard Price:	SGD 13.53
  Days to Ship:	4 Day(s) or more

• 

  HIF3F Series 2.54‑mm Pitch Box Type Pin Header

  HIROSE ELECTRIC

  This box type pin header is constructed to prevent reverse insertion. Able to be mated with HIF3B series sockets.
  
  [Features]
  ▪ Reverse insertion prevention: pin header equipped with a HIF3E series connector portion protector wall to prevent reverse insertion.
  ▪ Compatibility: pin header compatible with HIF3B series.

  Standard Price:	SGD 2.72-
  Days to Ship:	3 Day(s) or more

• 

  2.54-mm Pitch Low Profile Connector, HIF3FB and HIF3FC Series

  HIROSE ELECTRIC

  A 2.54-mm pitch RoPro file board-to-board (stacking or perpendicular) and board-to-cable connector.
  
  [Features]
  ・Prevents flux oozing: HIF3FC series straight type connectors have methods in place to prevent flux oozing.
  ・Low profile: pin heads are at a low height of 9.2 mm.
  ・The space between circuit boards when stacking is 12.2 mm.

  Standard Price:	SGD 2.30-
  Days to Ship:	3 Day(s) or more

• 

  2 mm Pitch, Direct-To-Circuit Board Connector, DF4 Series

  HIROSE ELECTRIC

  Connector for direct board-to-cable connection with 2-mm pitch. By directly attaching the terminal insertion socket into the circuit board, the header cost can be minimized.
  
  [Features]
  ・Minimizes header cost: using a dual insertion-removal socket and directly attached connector terminal harness, both circuit boards can have their separate functions used as-is, reducing the required number of headers for a dual terminal socket harness from 2 to 1.
  ・Small type/multi-pin: a wide range of small types with a number of pins.
  ・Circuit board mounting height: 4.3 mm (1 crimp attachment array), maximum pin number: 32 (2 crimp attachment arrays).
  ・Temporary circuit board fastening mechanism: Connector can be temporarily affixed to the circuit board in order to make insertion easier.

  Standard Price:	SGD 0.25-
  Days to Ship:	3 Day(s) or more

• 

  3.5‑mm Pitch 2-Row Connector For Small Internal Power Supplies, MDF6 Series【1-100 Pieces Per Package】

  HIROSE ELECTRIC

  Connector for board-to-cable connection with 3.5mm pitch. Although compact in size, this connector supports 7 maximum amperes, and its inner-lock construction provides a highly reliable connection, ideal for internal power supplies.
  
  [Features]
  · Compact type with 3.5mm pitch: A small-size, space-saving power supply connector, with pitch between adjacent contacts set at 3.5 mm, and arranged in a double-row pattern with 5 mm between opposing sides.
  · 7A current rating ensured: Despite the compact size of the power supply, 7A current rating is ensured with use of AWG #16 wires (UL/CSA rating is 6A). Box-style header: Twist-resistant due to its box-style construction, enabling complete prevention of insertion errors.
  · Equipped with inner-type full lock: An inner-type full lock with a locking section that is not exposed to the outside ensures secure engagement for a high level of safety.
  In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

  Standard Price:	SGD 1.65-
  Days to Ship:	3 Day(s) or more

• 

  DeviceNet Compliant Connector, HR31 Series

  HIROSE ELECTRIC

  These are DeviceNet standard compliant connectors. These connectors simplify connection, reduce plug connector size, and promote differentiation compared to conventional parts.
  
  [Features]
  · DeviceNet compliant: The HR31 series is a FA network device standards product. (Terminal contacts: Gold-plated)
  · Screw-lock: All screw-lock equipped products can be securely locked, allowing for increased locking strength.
  · Snap-lock: The snap-lock feature creates a tactile click when mating.
  · Commercially available tools can be used: These connectors are designed to be used with crimp tools conforming to JIS C 9711 standards.
  · Designed to allow for removal by ⌀1 mm pin when improperly wired.
  · Protected contacts: The crimped contacts are protected by the plug housing, reducing damage to the contacts during connection.

  Standard Price:	SGD 6.09
  Days to Ship:	4 Day(s) or more

• 

  Rectangular Miniature Multi-Pin Rack / Panel Crimp Connector, QR/P1 Series【1-100 Pieces Per Package】

  HIROSE ELECTRIC

  Compact, high-density mounted, rectangular multipole rack/panel plug-in connector QR/P. Compact crimp terminals divided into power supply and signal use.
  
  [Features]
  · The terminals have smooth insertion and removal feel, and stable contact pressure is achieved by point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
  · The terminals are made compact by segregating according to those for power and those for signals.
  · The housing internal pinout has pin 12 opposing pin 2 on one side, pins 8, 24 opposing pin 2 on both sides (total: 4 pins), and pin 32 opposing pin 3 on one side (total: 6 pins) with a greater distance of separation from other pins. These terminal pins feature a creepage distance that can adequately withstand high voltages. Therefore, the terminals can be used as power supply terminals.
  · Additionally, a flame retardant material (UL9V-0) is used for the insulating material.
  · Guide pins are metallic to withstand coupling impact.
  · Installation to a panel or rack is achieved via a floating bush. Therefore, insertion and removal do not require the application of excessive force.
  In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

  Standard Price:	SGD 6.83-
  Days to Ship:	4 Day(s) or more

• 

  Rack and Panel Connector, QR/P4 Series

  HIROSE ELECTRIC

  Rectangular multipolar racks with plug-ins connector/panel connector QR/miniaturization of P1/Implementation of high density. • Small design with the insulation and the guide pin incorporated into a single body shape.
  
  [Features]
  · The terminals have a smooth insertion and removal feel, and stable contact pressure is achieved by point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
  · The terminals are made compact by segregating according to those for power and those for signals.
  • The signal terminal pitch inside the housing is 2.54 mm, and the 2 poles on both sides (total: 4 poles) are distributed with 5.08-mm pitches for sufficient durability to withstand high voltage, so these units can be used for power supplies.
  • In addition, the insulation is a flame retardant material (UL9V-0).
  • The small design features guide pins and insulation joined in a single body shape.
  • Mounting to the panel or the rack uses a stepped screw system to fix the product in place, allowing for comfortable insertion and removal operations.
  • The female-type housing uses a mating surface deeper than the contact point for female terminals, for a structure with finger testing (compliant with UL standard 1950) capabilities.
  • This product has obtained UL, CSA, and TUV certifications.

  Standard Price:	SGD 4.27
  Days to Ship:	4 Day(s) or more

Loading...