Radius End Mills (Carbide)（Machining Application：Side）

• 

  XAL Coated Carbide Radius End Mill, 4-Flute, 45° Torsion / Short Model

  MISUMI

  Introducing the short type in the 4-flute radius for high-efficiency and high-speed machining

  • Volume Discount

  Standard Price:	SGD 28.71-
  Days to Ship:	4 Day(s) or more

• 

  TSC series carbide tapered neck radius end mill, 2-flute / tapered neck model

  MISUMI

  [Features]·Suppresses chattering by adopting short flute length and back taper shape on peripheral edge·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes

  Days to Ship:	4 Day(s) or more

• 

  Carbide Radius End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model

  MISUMI

  Comes with the rounded edge that suppresses machining streaks in standing-wall multi-stage machining

  • Volume Discount

  • Non-Coated
  • Aluminum
  • 3 Flutes

  Standard Price:	SGD 99.62-
  Days to Ship:	4 Day(s) or more

• 

  ULTRA WX Micro Grain Carbide End Mills TiAlN Coated 4 Flutes Short with Corner Radius (Super Hard)

  OSG

  Next generation high torsion radius end mill with great chip discharge performance and high blade rigidity. Supports a wide range of cutter passes including ramping and profile processing in addition to normal 2D machining.

  Standard Price:	SGD 458.33-
  Days to Ship:	3 Day(s) or more

• 

  TSC series carbide radius end mill, 4-flute, 45° spiral / long shank, short model

  MISUMI

  [Features]·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes·Because of its high chip removal capability performance, it is possible to process at feed rate that is more than double compared to that of standard end mill·Long shank type ideal for deep cavity milling·For ø7 and above, shank diameter is thinner than cutting diameter to prevent interference·Can be regrinded. Please refer to the pag...Readmore

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • S (Short)

  Standard Price:	SGD 111.00-
  Days to Ship:	4 Day(s) or more

• 

  TSC series carbide radius end mill, 2-flute / short model

  MISUMI

  [Features]·Short flute length type with cutting edge radius attached to general purpose 2-flute end mill·Radius cutting edge is also effective in suppressing chipping·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes
  • S (Short)

  Days to Ship:	4 Day(s) or more

• 

  TSC series carbide radius end mill, 3-flute, 45° spiral, stub / tapered neck model

  MISUMI

  By the adoption of 3-blade shape and tapered neck, chattering is suppressed in deep engraving

  • Volume Discount

  • TS
  • High-Hardness Steel
  • 3 Flutes
  • B (Stub)

  Standard Price:	SGD 88.92-
  Days to Ship:	4 Day(s) or more

• 

  Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill

  MISUMI

  [Features]·Alteration end mill that can specify radius size of carbide end mill in 0.1 mm increments·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Non-Coated
  • General Steel

  Days to Ship:	5 Day(s) or more

• 

  XCP Coated Carbide Radius End Mill For Tempered Steel / High Hardness Steel Machining / 4-Flute / Regular Type

  MISUMI

  · A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).· Coating with excellent hardness and heat resistance makes it suitable for high speed machining.· 4-flute radius end mill that achieves high feed/high speed machining

  • High-Hardness Steel
  • 4 Flutes
  • SR

  Standard Price:	SGD 35.32-
  Days to Ship:	4 Day(s) or more

• 

  GS MILL radius GS4-R

  NACHI(FUJIKOSHI)

  Ideal for corner rounding and high-speed contour machining of molds and machine parts.

  Standard Price:	SGD 75.97-
  Days to Ship:	3 Day(s) or more

• 

  ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Long with Corner Radius

  OSG

  Long shank type to enable machining deep parts. Can be also used as a corner chipping countermeasure.

  Standard Price:	SGD 176.38-
  Days to Ship:	3 Day(s) or more

• 

  ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes High Helix Short with Corner Radius

  OSG

  The highly sharp, positive cutting blade prevents the occurrence of work-hardening. Supports various cutter paths due to the rounded corners.

  Standard Price:	SGD 200.97-
  Days to Ship:	3 Day(s) or more

• 

  Radius End Mill 2-Flute

  ATOM

  Simultaneously machines rounded corners and straight base surfaces. High precision radius shape smoothly connects the straight part with the rounded part.

  Standard Price:	SGD 76.84-
  Days to Ship:	4 Day(s) or more

• 

  Solid End Mill for Aluminum Machining (Regular Blade) (with Corner Radius) AL-SEES3-R Type

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Standard Price:	SGD 172.40-
  Days to Ship:	6 Day(s) or more

• 

  Super One-Cut End Mill DZ-SOCS4 Type (Regular Blade Length) (With Rounded Corners)

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Standard Price:	SGD 112.30-
  Days to Ship:	3 Day(s) or more

• 

  One-Cut Radius End Mill for Heat Resistant Alloy DV-OCSAR Type

  DIJET

  [Features]· Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Standard Price:	SGD 153.52-
  Days to Ship:	14 Day(s)

• 

  Endmill with 3 Carbide Flutes for Aluminum Alloys for Use with Vertical Walls ALRE-3DLC

  KYOWA SEIKO

  [Specifications]· Shape: Radius End Mill (carbide)· Material: Super Micro Grain Alloy· Work materials: General steel [◎] / tempered steel [○] / stainless steel [◎] / cast iron [◎][Applications] Flat Surfaces / Side Surfaces / Curved Surfaces / Grooves / Inclined Cutting

  Standard Price:	SGD 160.58-
  Days to Ship:	6 Day(s) or more

• 

  Endmill with 3 Carbide Flutes and Corner Radius for Aluminum Alloys Short Type ALERS-3DLC

  KYOWA SEIKO

  [Specifications]· Shape: Radius End Mill (carbide)· Material: Super Micro Grain Alloy· Work Materials: Aluminum [◎], Copper [◎][Applications] Flat Surfaces / Side Surfaces / Curved Surfaces / Grooves / Inclined Cutting

  Standard Price:	SGD 106.06-
  Days to Ship:	6 Day(s) or more

• 

  WATERMILLS ® End Mill for Aluminum WR345 3-Flute High-Helix AL R345, No Coating

  WATERMILLS

  [Features]·Strong twist.·Quieter and smoother cutting.·Can be used for both roughing and finishing.·The unique groove shape enables smooth chip shape and discharge.·Center cut.·It has a cylindrical second angle to prevent chattering.

  Standard Price:	SGD 60.47-
  Days to Ship:	6 Day(s) or more

• 

  XAL series carbide radius end mill, 3-flute, 45° torsion / regular model

  MISUMI

  3-flute 45° helix radius that's resistant to chattering is available at an affordable price

  • Volume Discount

  • XAL
  • General Steel
  • 3 Flutes

  Days to Ship:	4 Day(s) or more

• 

  XAL series carbide radius end mill, 4-flute, 45° torsion / regular model

  MISUMI

  4-Flute Radius for High-Efficiency and High-Speed Machining

  • Volume Discount

  • XAL
  • General Steel
  • 4 Flutes

  Days to Ship:	4 Day(s) or more

• 

  (Economy series) XAL series carbide radius end mill, 2-flute / short model

  MISUMI

  Radius end mills are available at low prices

  • Volume Discount

  • XAL
  • General Steel
  • 2 Flutes

  Standard Price:	SGD 24.47-
  Days to Ship:	4 Day(s) or more

• 

  (Economy series) XAL series carbide radius end mill, 4-flute / short model

  MISUMI

  The 4-flute type that simultaneously achieves improved efficiency and tool cost reduction can be selected from 17 sizes

  • Volume Discount

  • XAL
  • General Steel
  • 4 Flutes

  Standard Price:	SGD 31.78-
  Days to Ship:	4 Day(s) or more

• 

  TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model

  MISUMI

  [Features]·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed·Uses 3-flute shape that is resistant to chattering, so plunge processing is possible·By adopting stub flute length that has same flute length as cutting diameter, it is possible to process bottom surface while suppressing chattering·Versatile typ...Readmore

  • Volume Discount

  • TS
  • High-Hardness Steel
  • 3 Flutes
  • B (Stub)

  Standard Price:	SGD 91.13-
  Days to Ship:	4 Day(s) or more

• 

  TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model

  MISUMI

  [Features]·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed·Uses 3-flute shape that is resistant to chattering, so plunge processing is possible·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish·Can be regrinded. Please refer to the page dedicated to "regrinding servi...Readmore

  • Volume Discount

  • TS
  • High-Hardness Steel
  • 3 Flutes
  • S (Short)

  Standard Price:	SGD 85.60-
  Days to Ship:	4 Day(s) or more

• 

  TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade

  MISUMI

  [Features]·High rigidity is achieved by adopting negative radius and short blade length without helix angle and chattering is suppressed even at pocket corners·Since it has back taper, it is possible to perform machining without peripheral edge hitting side when machining corners·Even for bottom surface processing, single machine can handle from middle finish to final finish, realizing reduction in process time

  • Volume Discount

  • TS
  • High-Hardness Steel
  • 4 Flutes

  Standard Price:	SGD 66.54-
  Days to Ship:	4 Day(s) or more

• 

  TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model

  MISUMI

  [Features]·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed·By adopting stub flute length that has same flute length as cutting diameter, it is possible to process bottom surface while suppressing chattering·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish·Can be r...Readmore

  • Volume Discount

  • TS
  • High-Hardness Steel
  • 4 Flutes
  • B (Stub)

  Standard Price:	SGD 58.97-
  Days to Ship:	4 Day(s) or more

• 

  TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model

  MISUMI

  [Features]·High rigidity and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • High-Hardness Steel
  • 4 Flutes
  • S (Short)

  Standard Price:	SGD 87.76-
  Days to Ship:	4 Day(s) or more

• 

  TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model

  MISUMI

  Long neck type with interference prevention can be selected from a number of effective lengths

  • Volume Discount

  • TS
  • High-Hardness Steel
  • 4 Flutes
  • S (Short)

  Standard Price:	SGD 94.36-
  Days to Ship:	4 Day(s) or more

• 

  TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model

  MISUMI

  [Features]·Designed with optimum blade length, shank length and overall length considering processing using shrink fit holder·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 3 Flutes
  • B (Stub)

  Standard Price:	SGD 78.78-
  Days to Ship:	4 Day(s) or more

• 

  TSC series carbide radius end mill (for shrinkage fitting), 4-flute, 45° spiral / stub model

  MISUMI

  [Features]·Designed with optimum blade length, shank length and overall length considering processing using shrink fit holder·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • B (Stub)

  Standard Price:	SGD 82.77-
  Days to Ship:	4 Day(s) or more

• 

  TSC series carbide radius end mill, 3-flute, 45° spiral / stub model

  MISUMI

  [Features]·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 3 Flutes
  • B (Stub)

  Days to Ship:	4 Day(s) or more

• 

  TSC Series Carbide Radius End Mill, 3-Flute / 45° Spiral / Short Type

  MISUMI

  [Features]·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 3 Flutes
  • S (Short)

  Days to Ship:	4 Day(s) or more

• 

  TSC series carbide radius end mill, 3-flute, 45° spiral / regular model

  MISUMI

  [Features]·Radius type of multi-function end mill·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·Radius cutting edge is also effective in suppressing chipping

  • Volume Discount

  • TS
  • General Steel
  • 3 Flutes
  • R (Regular)

  Days to Ship:	4 Day(s) or more

• 

  TSC series carbide radius end mill, 4-flute, 45° spiral / stub model

  MISUMI

  [Features]·Radius type of multi-function end mill·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·Radius cutting edge is also effective in suppressing chipping·By adopting stub blade length that is 1.5 times longer than cutting diameter, it is possible to process bottom surface w...Readmore

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • B (Stub)

  Days to Ship:	4 Day(s) or more

• 

  TSC series carbide radius end mill, 4-flute, 45° spiral / short model

  MISUMI

  [Features]·Multi-function end mill radius type.·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·Radius cutting edge is also effective in suppressing chipping·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • S (Short)

  Days to Ship:	4 Day(s) or more

• 

  TSC series carbide radius end mill, 4-flute, 45°, regular model

  MISUMI

  [Features]·Radius type of multi-function end mill·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·Radius cutting edge is also effective in suppressing chipping·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • R (Regular)

  Days to Ship:	4 Day(s) or more

• 

  TSC series carbide radius end mill, 2-flute stub model

  MISUMI

  [Features]·Rigidity-oriented type designed with optimum blade length, shank length and overall length in consideration of processing using shrink fit holder·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes
  • B (Stub)

  Standard Price:	SGD 46.90-
  Days to Ship:	4 Day(s) or more

• 

  TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model

  MISUMI

  [Features]·Short flute length type with cutting edge radius attached to general purpose 2-flute end mill·Radius cutting edge is also effective in suppressing chipping·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes
  • B (Stub)

  Days to Ship:	4 Day(s) or more

• 

  TSC series carbide radius end mill, 2-flute / regular model

  MISUMI

  [Features]·General purpose 2-flute end mill with regular flute length type with cutting edge radius·Radius cutting edge is also effective in suppressing chipping·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes
  • R (Regular)

  Days to Ship:	4 Day(s) or more

• 

  TSC Series Carbide Radius End Mill for Shrink Fit Holder/4-Flute/Stub Type

  MISUMI

  [Features]·Designed with optimum blade length, shank length and overall length considering processing using shrink fit holder·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • B (Stub)

  Standard Price:	SGD 56.96-
  Days to Ship:	4 Day(s) or more

• 

  TSC Series Carbide Radius End Mill 4-Flute / Stub Type

  MISUMI

  [Features]·Short flute length type with cutting edge radius attached to general purpose 4-flute end mill·Radius cutting edge is also effective in suppressing chipping·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • B (Stub)

  Days to Ship:	4 Day(s) or more

• 

  TSC series carbide radius end mill, 4-flute / short model

  MISUMI

  [Features]·Short flute length type with cutting edge radius attached to general purpose 4-flute end mill·Radius cutting edge is also effective in suppressing chipping·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • S (Short)

  Days to Ship:	4 Day(s) or more

• 

  TSC series carbide radius end mill, 4-flute / regular model

  MISUMI

  [Features]·Regular flute length type with cutting edge radius attached to general-purpose 4-flute end mill·Radius cutting edge is also effective in suppressing chipping·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • R (Regular)

  Days to Ship:	4 Day(s) or more

• 

  TSC series carbide radius end mill, 4-flute, 45° spiral, stub / tapered neck model

  MISUMI

  [Features]·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed·Taper neck is effective in suppressing chattering·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, rang...Readmore

  • Volume Discount

  • TS
  • High-Hardness Steel
  • 4 Flutes
  • B (Stub)

  Standard Price:	SGD 116.38-
  Days to Ship:	4 Day(s) or more

Loading...