Vernier Calipers（Display Method：Digital）

• 

  [Kanon] Vernier Caliper, Flat Head Caliper E-PITA

  NAKAMURASEISAKU

  The flat head makes it easy to measure from any corner.
  [Features]
  ·The design has been completely redesigned! A wide variety of sizes are also available.
  ·Digital type pita calipers.
  ·The display is large and easy to read.
  
  List of vernier calipers List of standard vernier calipers List of digital vernier calipers See how to use vernier caliper

  Standard Price:	SGD 143.57-
  Days to Ship:	Same day or more

• • On Sale Till 31/03/2025

  

  Vernier Caliper, Digital Calipers Made From Carbon Fiber

  SHINWASOKUTEI

  Calipers used for various dimensional measurements.
  [Features]
  · Made from digital carbon fiber, it is lightweight, non-rusting, and non-scratching.
  · With auto power off function which automatically switches off power after 5 minutes in the non-operational state.
  [Applications]
  · Ideal for outer diameter measurement, inner diameter measurement, depth measurement (150 mm), and step measurement.

  Standard Price:	SGD 23.45-
  	Special Price
  Days to Ship:	Same day

• 

  Vernier Caliper, Digital Calipers SDV-100/SDV-150

  SK 11

  Digital type allows easy measurement of outer diameter, inner diameter, level difference and depth, etc.
  [Features]
  · Measurement values are instantly displayed on the digital display.
  · With zero setting function to enable relative measurements and indirect measurements.
  · With a hold function that can set and hold a read value.
  [Applications]
  · Measuring outer diameter, inner diameter, level difference and depth, etc.

  Standard Price:	SGD 40.44-
  Days to Ship:	4 Day(s) or more

• 

  Digital Vernier Calipers (Maximum Measurement Length 150 to 200 mm)

  MISUMI

  A standard-type digital vernier caliper.
  · Usable for measurement of outer diameter, internal diameter, step difference, and depth.
  · Digital display for easy reading.
  · With holding function.

  Standard Price:	SGD 126.35-
  Days to Ship:	Same day or more

• 

  Digital calipers with mini hold function

  SHINWASOKUTEI

  Calipers that can perform outer diameter and inner diameter measurement, depth measurement, step measurement, comparison measurement, and indirect measurement.
  [Features]
  · Digital display can be understood at a glance.
  · The minimum read value is 0.01 mm, ideal for extremely precise work.
  · With zero setting function to enable relative measurements and indirect measurements.
  · Equipped with a hold function that's useful when the display is not visible.
  · The unit features a drip-proof structure.
  [Applications]
  · Used for various dimensional measurements.

  Standard Price:	SGD 65.93
  Days to Ship:	Same day

• 

  [Kanon] Vernier Caliper, Long Jaw Caliper E-LSM

  NAKAMURASEISAKU

  [Features]
  · Ideal for measuring diameters for spheres, pipes, etc.
  · Long jaw calipers with "long length jaw" ideal for measuring large diameter pipes, etc.
  · Outer jaw length is 1/2 or more of the measurement length, ideal for diameter measurement of spheres, pipes, etc.
  · Printer output function included

  Standard Price:	SGD 3,243.80
  Days to Ship:	8 Day(s)

• 

  Digital Vernier Calipers (High-Speed Model LCD)

  TRUSCO NAKAYAMA

  [Features]
  · Features a high-speed model LCD.
  · Digital display for clear viewing.
  · With hold function.
  · Comes with complete inspection tables.
  [Applications]
  · Exterior measurements, interior measurements, step measurements, depth measurements.

  Standard Price:	SGD 92.30-
  Days to Ship:	4 Day(s) or more

• 

  Digital Vernier Calipers, Left-Handed

  NIIGATA SEIKI (SK)

  Digital calipers dedicated for left-handed people.
  [Features]
  · Clearly visible digital display.
  · Material: Stainless steel
  · Power supply: SR44 (silver oxide battery) x 1 included for testing.
  [Applications]
  · Can be used for measuring outside, inside, level difference and depth.

  Standard Price:	SGD 229.25-
  Days to Ship:	4 Day(s) or more

• 

  Digital Vernier Calipers With Large Text And Hold Function (150 mm / 200 mm / 300 mm / 450 mm / 600 mm / 1,000 mm)

  SHINWASOKUTEI

  Digital indicator calipers where there is no need to read the main scale. Equipped with a hold convenient for measuring places where the LCD unit is not visible. The minimum read value is 0.01 mm, ideal for extremely precise work.
  [Features]
  · With zero setting function to enable relative measurements and indirect measurements.
  · A hold function is useful when the display is not visible.
  · Drip-proof unit parts.
  (Can be used when wet if immediately wiped dry.)
  [Applications]
  · External measurements, internal measurements, step measurements, depth measurements

  Standard Price:	SGD 143.57-
  Days to Ship:	Same day or more

• 

  [Kanon] Vernier Caliper, Centerline Caliper E-RM-J

  NAKAMURASEISAKU

  Two measurements are possible. Multifunctional round hole pitch vernier caliper.
  [Features]
  ·Both the hole-to-hole pitch and the pitch from the end face to the hole can be "directly read with a single tool".
  ·It can be read directly by offset input.
  ·By setting the upper offset value (15.00 mm) and the lower offset value (7.50 mm), this machine displays the measured pit dimensions in actual size, eliminating the need to calculate additions and subtractions to the displayed values like conventional products. has become much easier to use.
  ·With this single vernier caliper, you can directly read the pitch from hole to hole and the pitch from the edge to the hole.
  [Applications]
  ·Sheet metal processing products and construction housing.
  ·The upper and lower offset values can be easily set by pressing the "SET" button.
  
  List of vernier calipers List of hole pitch vernier calipers List of digital vernier calipers See how to use vernier caliper

  Standard Price:	SGD 1,019.38-
  Days to Ship:	8 Day(s)

• 

  [Kanon] ULJ Caliper with Judgment Function

  NAKAMURASEISAKU

  [Features]
  · "Judgment function" allows pass/fail to be determined instantly.
  · When dividing go/no-go products for mass production parts, work time can be significantly reduced.
  · By setting the acceptance criteria for the measured workpiece in advance, the OK/NG display can be checked instantaneously on the panel.
  · Anyone can make measurements, simply and quickly.
  · The flat head tip perfectly contacts complex shapes that had been difficult to measure with conventional calipers, allowing end face measurement without stress

  Standard Price:	SGD 182.40-
  Days to Ship:	8 Day(s)

• 

  [Kanon] Centerline Caliper E-RX-J

  NAKAMURASEISAKU

  [Features]
  · The pitch of circular holes can be measured by direct reading.
  · Pitch measurement is also possible between stepped holes.
  · Made of stainless steel (SUS420J2).
  [Applications]
  · For measurement at hole drilling sites.

  Standard Price:	SGD 1,414.10
  Days to Ship:	8 Day(s)

• 

  [Kanon] Centerline Caliper E-RM-2

  NAKAMURASEISAKU

  [Features]
  · Ideal for measuring hole pitch: Round-hole pitch calipers ideal for measuring "small-diameter holes and narrow pitch" and "offset types" because the measuring element moves vertically.
  · Since the measuring element of the main scale moves vertically, it possible to measure not only same-diameter holes but also the pitch between different diameter holes.
  · A dedicated gauge block is supplied as an accessory.
  · Printer output function included

  Standard Price:	SGD 1,058.09-
  Days to Ship:	8 Day(s) or more

• 

  [Kanon] Caliper E-PEAK

  NAKAMURASEISAKU

  [Features]
  · Evolution of calipers (leading to reduced measurement time and labor saving).
  · Automatically retains the maximum and minimum values.
  · The maximum value mode (Max) is useful for measuring inner diameters. The E-PEAK calipers automatically hold the maximum value of the inner diameter.
  · Minimum value mode is convenient for outer diameter measurements in hard-to-see places. E-PEAK calipers automatically maintain the minimum value of the outer diameter.

  Standard Price:	SGD 196.10-
  Days to Ship:	4 Day(s) or more

• 

  [Kanon] Centerline Caliper E-RM60B

  NAKAMURASEISAKU

  [Features]
  · Ideal for measuring the pitch between holes of the same diameter on a long workpiece.
  · Large digital calipers with a "measurement length of 600 mm" ideal for equal diameter hole measurements with long workpieces.
  · Long calipers which can measure the pitch between 2 holes of the same diameter and the distance between the edge and the hole center.
  · A dedicated gauge block is supplied as an accessory.
  · Printer output function included

  Standard Price:	SGD 2,123.20
  Days to Ship:	10 Day(s)

• 

  [Kanon] Centerline Caliper E-RM30DX

  NAKAMURASEISAKU

  [Features]
  · Ideal for measuring hole pitch from wall surfaces.
  · A multifunction, direct reading type, digital round hole pitch caliper, with which "3 measurements" can be enabled by replacing the gauge head.

  Standard Price:	SGD 1,192.20
  Days to Ship:	Quote

• 

  [Kanon] Vernier Caliper For Inside Measurement E-ICM-J

  NAKAMURASEISAKU

  [Features]
  · Ideal for internal measurements in deep places.
  · Inside calipers with a "long-narrow jaw" ideal for inner depth measurements.
  · Long and thin jaw is ideal for internal measurements in deep holes.
  · A digital direct reading type

  Standard Price:	SGD 653.10
  Days to Ship:	8 Day(s)

Loading...