Disks（Type：Non-woven fabric disc）

• 

  Poly Light Disc S【5 Pieces Per Package】

  ICHIGUCHI

  Adopted a unique abrasive material that brings out an exceptionally glossy finish while maintaining the polishing strength of the non-woven fabric abrasive. S type has bristles set shorter than L type. Prevents nonwoven fabrics from getting caught on irregular surfaces, standing workpieces, etc.

  Standard Price:	SGD 70.69
  Days to Ship:	4 Day(s) or more

• 

  Bevel Disc Hole Type【5 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · Thanks to its umbrella-like shape, the tip of the disc remains in constant contact with the workpiece, making a beautiful finish possible.
  · Flexibility is high, so it can also fit well to uneven surfaces without shaving off too much of the workpiece.
  · Minimal clogging and no nylon deposition.
  · Can be used safely without the risk of wire scattering like a wire brush, etc.
  · Mounting hole diameter is 15 mm, usable with both electric and pneumatic grinders.
  · A user-friendly design that suppresses center run-out.
  [Applications]
  · Stubborn rust removal, blackening removal, scraping work, etc.

  Standard Price:	SGD 70.32-
  Days to Ship:	6 Day(s) or more

• 

  SG Unilon Black, 100 pcs, Soft

  YANASE

  Wipes away coating and rust without shaving the base material.
  
  [Features]
  · Wipes away coating and rust without shaving the base material.
  · Allows work to be performed safely without the scattering of a wire brush.
  · No deep scratches.
  · An attractive finished surface.
  · Has excellent polishing power

  Standard Price:	SGD 15.10
  Days to Ship:	8 Day(s)

• 

  SG Mirror Surface One Shot Disc ø100

  YANASE

  Shows its power during pre-buffing processes.
  
  [Features]
  · Shows its power during pre-buffing processes.
  · This is a new type of polishing material created by impregnating Unilon fibers with abrasive to which foamed urethane is then applied.
  · It is elastic so that a beautiful finished surface is achieved, without leaving any deep scratches.

  Standard Price:	SGD 27.69-
  Days to Ship:	4 Day(s) or more

• 

  New Soft Lap【25-40 Pieces Per Package】

  UHT

  An abrasive with abrasive grains kneaded into nonwoven fabric. There is no need to apply abrasive as there is with buffs. In addition, as the density is not as high as buffs, it supports high-speed rotation. Suitable for polishing key grooves and the inner diameter of pipes. In this type, a new soft lap is pinched with lap shafts and fixed with screws for use.

  Standard Price:	SGD 44.09-
  Days to Ship:	8 Day(s) or more

• 

  Disk Type New Soft Lap【25 Pieces Per Package】

  UHT

  An abrasive with abrasive grains kneaded into nonwoven fabric. There is no need to apply abrasive as there is with buffs. In addition, as the density is not as high as buffs, it supports high-speed rotation. Suitable for polishing key grooves and the inner diameter of pipes. In this type, a new soft lap is pinched with lap shafts and fixed with screws for use.

  Standard Price:	SGD 45.13-
  Days to Ship:	8 Day(s)

• 

  Skoo Light Disc S【5 Pieces Per Package】

  ICHIGUCHI

  Nonwoven fabric abrasive material that encloses a sufficient gap is used, so it only finishes the surface without engraving the workpiece. M (mixed item) is a nonwoven fabric abrasive material mixed with an abrasive polishing cloth. M (mixed item) has higher grinding power than S (standard item), and it is less likely to scorch.

  Standard Price:	SGD 62.64
  Days to Ship:	5 Day(s) or more

• 

  SG Unilon Black/Hard

  YANASE

  Wipes away coating and rust without shaving the base material.
  
  [Features]
  · Wipes away coating and rust without shaving the base material.
  · Allows work to be performed safely without the scattering of a wire brush.
  · No deep scratches.
  · An attractive finished surface.
  · Has excellent polishing power

  Standard Price:	SGD 25.90
  Days to Ship:	8 Day(s)

• 

  Unilon Black, Soft

  YANASE

  Wipes away coating and rust without shaving the base material.

  Standard Price:	SGD 10.00
  Days to Ship:	8 Day(s) or more

• 

  Mini FC Disc

  NEW REGISTON

  [Features]
  · Small-diameter disc suitable for narrow places and small areas. Since abrasive grains are attached to cushioning fibers, a clean finish can be achieved without over-grinding the steel.
  · Breathable so clogging doesn't occur and there are no friction burns.

  Standard Price:	SGD 6.60-
  Days to Ship:	4 Day(s) or more

• 

  "Fabric Disc" (for Double-Action Sander / Non-Woven Fabric Abrasive)【2 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · Made from non-woven nylon fibers and alundum abrasive grains, thereby ensuring gentle grinding work, suitable for finished products.
  · Attached to the pad with Velcro tape for use.
  [Applications]
  · For removing light rust from metallic products and for glazing.
  · Smoothing out wood products.
  · Tool used: dual-action sander (Velcro type).

  Standard Price:	SGD 5.79
  Days to Ship:	3 Day(s) or more

• 

  Nylon Disc【5 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · Uses nylon abrasives made by reinforcing tangled nylon fibers with abrasive dust. Compared to when the workpiece comes into direct contact with the abrasive in paper abrasive cloths, the fibers embedded in nylon abrasive agent act as a cushion, preventing excessive snagging of the workpiece. Mainly used for polishing work. No clogging as it has significant autogenous action.
  [Applications]
  · For removing burn of welding, sanding sealers at curved surfaces in woodworking, finishing before coating, satin finish, and mirror surface pretreatment.
  · Tool used: disc grinder.

  Standard Price:	SGD 62.33-
  Days to Ship:	3 Day(s) or more

• 

  "GP Nylon Disc" (Direct Screw-in Type)【5 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · It can be installed in a single action (screw type).
  · Uses a nylon abrasive agent in which abrasive is set between intertwined nylon fibers, so compared to when the workpiece comes into direct contact with the abrasive in paper abrasive cloths, the fibers embedded in nylon abrasive agent act as a cushion, preventing excessive snagging of the workpiece. Mainly used for polishing work. No clogging as it has significant autogenous action.
  [Applications]
  · For removing burn of welding, sanding sealers at curved surfaces in woodworking, finishing before coating, satin finish, and mirror surface pretreatment.
  · Tool used: disc grinder.

  Standard Price:	SGD 62.38-
  Days to Ship:	3 Day(s) or more

• 

  "New Nylon Disc" (High-Speed Rotation Type / Direct Screw-in Type)【5 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · It can be installed in a single action (screw type).
  · Even without adjusting the rotation speed, there is no burning or clogging. (High Rotation Model)
  · Uses nylon abrasives made by reinforcing tangled nylon fibers with abrasive dust.
  · It prevents over-grinding of non-abrasive materials.
  [Applications]
  · For removing burn of welding, sanding sealers at curved surfaces in woodworking, finishing before coating, satin finish, mirror surface pretreatment, and paint removal.

  Standard Price:	SGD 68.42-
  Days to Ship:	9 Day(s)

• 

  Nylon Mini Disc【5 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · Uses a nylon abrasive agent in which abrasive is set between intertwined nylon fibers, so compared to when the workpiece comes into direct contact with the abrasive in paper abrasive cloths, the fibers embedded in nylon abrasive agent act as a cushion, preventing excessive snagging of the workpiece.
  · Beautiful hairline processing is possible by using the side for straightening the line.
  [Applications]
  · For removing burns on stainless steel, aluminum and welding components. For paint film removal and mirror finishing.
  · Tool used: disc grinder.

  Standard Price:	SGD 42.08-
  Days to Ship:	4 Day(s) or more

• 

  GP Cleaning Disc【1-5 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · Polishing agent with softness for finishing with abrasive powder bound into special nylon non-woven fabric (silicon carbide).

  Standard Price:	SGD 31.25-
  Days to Ship:	3 Day(s) or more

• 

  GP Cleaning Wheel, GPCW

  TRUSCO NAKAYAMA

  [Features]
  · With flexibility, it fits well to uneven surfaces.
  · Cleans the surface without scraping the base coating.
  [Applications]
  · Rust removal, paint removal, cleaning before welding.

  Standard Price:	SGD 5.73-
  Days to Ship:	9 Day(s)

• 

  Fiber disk N-10【10 Pieces Per Package】

  NORITAKE COATED ABRASIVE

  [Features]
  · Abrasive supports applications in grinding and polishing. Can be used with various grinders.
  · N-10: Fiber disc capable of high performance grinding and having a long service life.
  · C abrasive material/A abrasive material can be selected according to the application.

  Standard Price:	SGD 20.65-
  Days to Ship:	7 Day(s) or more

• 

  Non-Woven Fabric Wheel

  NORITAKE COATED ABRASIVE

  Strong polishing force and durable. Has a wide range of uses from deburring to rust removal.

  Standard Price:	SGD 59.10-
  Days to Ship:	7 Day(s) or more

• 

  Sco-Light Flap M【5 Pieces Per Package】

  ICHIGUCHI

  Nonwoven fabric abrasive material has been processed into a flap shape. Suitable for work on both flat surfaces and irregularly shaped surfaces. Supports rough to fine finishing.
  
  [Features]
  · Polishing cloth (sandpaper) is sandwiched between nonwoven fabric abrasive material.
  · Higher abrasive power than S type, and can also be used for hairline machining.

  Standard Price:	SGD 163.21-
  Days to Ship:	5 Day(s) or more

• 

  S/C Disk

  ICHIGUCHI

  Light, safe polishing disc made from cloth (non-woven fabric) that fits surfaces ranging from flat to curved surfaces. Attach the dedicated pads for work on flat surfaces. Remove the dedicated pads for work on curved surfaces.
  
  [Features]
  · It is a nonwoven fabric abrasive disc reinforced with a strong fabric.
  · Fits well to both flat and curved surfaces for firm polishing.
  · The center is dented, which makes it easy to handle and simple to install.
  · If a dedicated pad of 96ø is attached, smooth work is possible even on flat surfaces.
  · If a dedicated pad of 68ø is attached, even curved surfaces can be polished easily.
  · Securely fits curved surfaces in addition to flat surfaces.
  · Enables smooth polishing with no clogging.
  · For removing secondary burrs after machining, spatter, rust on forged parts, burrs, and parting lines.
  · For machining scratches and mismatch leveling.
  

  Standard Price:	SGD 10.67-
  Days to Ship:	8 Day(s)

• 

  S/C Disk Ceramic Type【10 Pieces Per Package】

  ICHIGUCHI

  Light, safe polishing disc made from cloth (non-woven fabric) that fits surfaces ranging from flat to curved surfaces. Attach the dedicated pads for work on flat surfaces. Remove the dedicated pads for work on curved surfaces.
  
  [Features]
  · It is a nonwoven fabric abrasive disc reinforced with a strong fabric.
  · Fits well to both flat and curved surfaces for firm polishing.
  · The center is dented, which makes it easy to handle and simple to install.
  · If a dedicated pad of 96ø is attached, smooth work is possible even on flat surfaces.
  · If a dedicated pad of 68ø is attached, even curved surfaces can be polished easily.
  · Securely fits curved surfaces in addition to flat surfaces.
  · Enables smooth polishing with no clogging.
  · The ceramic type is ideal for harder polishing work.
  · Since it is made out of cloth, it is light and reliable.
  · Secondary burrs after machining

  Standard Price:	SGD 87.74
  Days to Ship:	5 Day(s) or more

• 

  Blade Disc【5 Pieces Per Package】

  ICHIGUCHI

  Utilizes a sintered, exceptionally powerful and flexible unique non-woven nylon polishing material. Perfect for cleaning the surface only without scratching the underlay, such as removing rust from metal surfaces, and paint or foreign substance removal.
  
  [Features]
  · It is an abrasive material that combines high peeling capacity, anti-clogging structure and softness that prevents the substrate from being scraped.
  · Removes rust, paint, and black scale.
  · According to the tool, select disc grinder type, wheel with shaft, or perforated type.
  · For rust and coating agent removal, paint, varnish, and sealant removal, overwelding repair, polyethylene molding, gasket and light spatter removal, and black scale (oxide film) removal

  Standard Price:	SGD 88.15
  Days to Ship:	3 Day(s) or more

• 

  Bevel Disc

  TRUSCO NAKAYAMA

  The disc processed into a special umbrella shape, the tip of the disc contacts the work piece at all times to deliver a beautiful finish. High flexibility allows excellent fitting to uneven surfaces without excessively scraping off the work piece. Minimum clogging with no welding of nylon. Allows safe use with no worries of wires scattering unlike with wire brushes. Allows one touch attachment / removal of the grinder with a M10 screw. Operator-friendly design with less axial deflection. Stubborn rust removal, scorching removal and crane work.

  Standard Price:	SGD 95.75
  Days to Ship:	4 Day(s) or more

• 

  Bevel Disc

  TRUSCO NAKAYAMA

  Thanks to the disc processed into a special umbrella shape, the tip of the disc contacts the work piece at all times to deliver a beautiful finish. High flexibility allows excellent fitting to uneven surfaces without excessively scraping off the work piece. Minimum clogging with no welding of nylon. Allows safe use with no worries of wires scattering unlike with wire brushes. Allows one touch attachment / removal of the grinder with a M10 screw. Operator-friendly design with less axial deflection. Scorching removal, oxide film removal and paint stripping.

  Standard Price:	SGD 70.26
  Days to Ship:	3 Day(s) or more

• 

  Bevel Disc

  TRUSCO NAKAYAMA

  The disc processed into a special umbrella shape, the tip of the disc contacts the work piece at all times to deliver a beautiful finish. High flexibility allows excellent fitting to uneven surfaces without excessively scraping off the work piece. Minimum clogging with no welding of nylon. Allows safe use with no worries of wires scattering unlike with wire brushes. Allows one touch attachment / removal of the grinder with a M10 screw. Operator-friendly design with less axial deflection. For surface roughing (scuffing) before stainless steel finishing, painting or gluing.

  Standard Price:	SGD 69.67
  Days to Ship:	3 Day(s) or more

• 

  Bevel Disc

  TRUSCO NAKAYAMA

  Thanks to the disc processed into a special umbrella shape, the tip of the disc contacts the work piece at all times to deliver a beautiful finish. High flexibility allows excellent fitting to uneven surfaces without excessively scraping off the work piece. Minimum clogging with no welding of nylon. Allows safe use with no worries of wires scattering unlike with wire brushes. Allows one touch attachment / removal of the grinder with a M10 screw. Operator-friendly design with less axial deflection. Rust removal and paint stripping.

  Standard Price:	SGD 69.83
  Days to Ship:	3 Day(s) or more

• 

  Nylon Disc Mini Hard【5 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · Uses a lot of nylon so it has a long working life.
  · Unlike a grindstone, there is no risk of excessive grinding and stable polishing is possible.
  [Applications]
  · Removes stubborn rust, black scale, etc.
  · Welding burn removal, paint peeling, finish of stainless steel, etc.

  Standard Price:	SGD 43.95-
  Days to Ship:	4 Day(s) or more

• 

  Bevel Disc Threaded Type

  TRUSCO NAKAYAMA

  [Features]
  · Thanks to its umbrella-like shape, the tip of the disc remains in constant contact with the workpiece, making a beautiful finish possible.
  · Flexibility is high, so it can also fit well to uneven surfaces without shaving off too much of the workpiece.
  · Minimal clogging and no nylon deposition.
  · Can be used safely without the risk of wire scattering like a wire brush, etc.
  · It can be attached/detached to the grinder in a single touch using a M10 screw.
  · A user-friendly design that suppresses center run-out.

  Standard Price:	SGD 69.67-
  Days to Ship:	3 Day(s) or more

• 

  miniQuickFC

  NEW REGISTON

  [Features]
  · Since abrasive grains are attached to cushioning fibers, a clean finish can be achieved without over-grinding the steel.
  · Breathable so clogging doesn't occur and there are no friction burns.

  Standard Price:	SGD 4.50-
  Days to Ship:	8 Day(s)

• 

  SKATT DISC (N) B/B【1-50 Pieces Per Package】

  ICHIGUCHI

  [Features]
  · Upgraded version of the popular product SKATT DISC.
  · Backup reinforcement enabled balanced polishing work and long life.
  · A wide array of products and rubber holders with selectable hardness enable use for a wide variety of work.
  [Applications]
  · Fine adjustment of metal and woodworking surfaces.

  Standard Price:	SGD 2.51-
  Days to Ship:	4 Day(s) or more

• 

  Pettan Unilon

  YANASE

  [Features]
  · Optimal for rust removal and paint peeling.
  · Suitable for covering scratches.
  

  Standard Price:	SGD 2.90-
  Days to Ship:	7 Day(s) or more

• 

  Hard Disc 2【10 Pieces Per Package】

  KURE GRINDING WHEEL

  [Features]
  · Polishing disc with abrasive cloth arranged in a fan shape on a plastic back plate.
  [Applications]
  · General grinding, polishing and deburring of metals, smoothing weld seams on steel, pre-grinding and scouring off rust before plating or painting

  Standard Price:	SGD 92.31
  Days to Ship:	13 Day(s) or more

Loading...