IMAO CORPORATION Leading-in / Bushing Clamps（Type：Main Body）

• 

  Remote Jack (CP300)

  IMAO CORPORATION

  · Can be remotely operated using a separately working extension bar etc.
  · Use extension bar for tapped hole machining. (Dimensions Reference)
  · When operating remotely using an extension bar, replace the knob on the extension bar to use.

  Standard Price:	SGD 344.00-
  Days to Ship:	6 Day(s) or more

• 

  Bushing Clamp (QLPU)

  IMAO CORPORATION

  Toolless clamp with lever operated boss protrusion. By using part in application configuration, a toolless clamp can be built. This series CAD data is being revised. These revisions will be completed soon.

  Standard Price:	SGD 198.70-
  Days to Ship:	8 Day(s) or more

• 

  Clamp Units (Single Type) (CP152)

  IMAO CORPORATION

  [Usage]
  · Clamp with intake from lower side of workpiece
  [Features]
  · Cylindrical shape for low interference with tool.

  CAD ：

  2D / 3D

  Standard Price:	SGD 705.46-
  Days to Ship:	6 Day(s) or more

• 

  Instroke Clamp (Hexagonal Type) PTPD

  IMAO CORPORATION

  [Features]
  · Can pull and clamp workpiece from bottom face.
  · As the clamp part is not interfering with the cutting surface, cutting processes can be simplified.
  · As operation part is sideways, compared to difficult to work hex bolt downward fixings, operation is easy.
  · Using the separately sold remote control unit, remote operation such as clamping workpiece center etc. is possible.

  Standard Price:	SGD 787.11
  Days to Ship:	6 Day(s) or more

• 

  Screw Jack (BJ330)

  IMAO CORPORATION

  [Features]
  · Suits shape of workpiece BJ733 use tip for screw jack. (See P.579)
  · By removing the fixing bolt on the bottom surface, position can be freely changed.

  Standard Price:	SGD 63.53-
  Days to Ship:	4 Day(s) or more

• 

  Instroke Clamp (QLPD)

  IMAO CORPORATION

  With the rotation of lever, clamp pin and clamp bolt draw in, clamping the workpiece. Both levered and non-lever types available. This series CAD data is being revised. These revisions will be completed soon.

  Standard Price:	SGD 282.72-
  Days to Ship:	7 Day(s) or more

• 

  Actima Clamp (ACR, ACL)

  IMAO CORPORATION

  Boss section is moved by lever operation. 2 types available: push-out / pull-in.

  Standard Price:	SGD 494.47-
  Days to Ship:	8 Day(s) or more

• 

  Air Instroke Clamp (AMWPD-W)

  IMAO CORPORATION

  [Features]
  · High clamping force.
  · Through wedge construction same size compared to air cylinder.
  · Approximately 2X clamping force.
  · Even in the event of loss of pressure due to air leakage etc. due to wedge construction.
  · there is no reduction in existing clamp force.
  · Air hole for seating sensor.
  · Seating confirmation use air hole provided, and so using the seating confirmation switch enables confirmation of workpiece seating.

  CAD ：

  2D / 3D

  Standard Price:	SGD 421.67-
  Days to Ship:	6 Day(s) or more

• 

  Clamp Unit (Flanged Type) (CP150)

  IMAO CORPORATION

  [Usage]
  · Clamp with intake from lower side of workpiece
  [Features]
  · Cylindrical shape for low interference with tool.

  CAD ：

  2D / 3D

  Standard Price:	SGD 558.75-
  Days to Ship:	9 Day(s)

• 

  Clamp Units (Double Type)(CP151)

  IMAO CORPORATION

  [Usage]
  · Clamp with intake from lower side of workpiece
  [Features]
  · Cylindrical shape for low interference with tool.

  CAD ：

  2D / 3D

  Standard Price:	SGD 954.88-
  Days to Ship:	9 Day(s)

• 

  Retracting Clamp (QLPD)

  IMAO CORPORATION

  [Features]·Left-turning and right-turning types are available, eliminating the hassle of bolt tightening. ·With or without a lever is selectable.

  CAD ：

  2D / 3D

  Standard Price:	SGD 280.96-
  Days to Ship:	9 Day(s)

• 

  Pulling Clamp (Heavy Load Type) (QLPDH)

  IMAO CORPORATION

  [Usage]
  · Clamping with instroke from upper side of workpiece.
  [Features]
  · Lever type toolless clamp.

  CAD ：

  2D / 3D

  Standard Price:	SGD 504.27-
  Days to Ship:	8 Day(s) or more

• 

  Jack (BJ334)

  IMAO CORPORATION

  [Features]
  · Use according to application height.
  · Use tip for jack suited to workpiece shape. BJ733 (See. P.577)

  Standard Price:	SGD 284.27-
  Days to Ship:	5 Day(s) or more

• 

  Standard Jack Standard (BJ334)

  IMAO CORPORATION

  [Features]
  · Main body is aluminum and so lightweight.
  · Use tip for jack BJ733 to suit workpiece shape (See P. 577)

  Standard Price:	SGD 135.75-
  Days to Ship:	6 Day(s) or more

Loading...