INTERFACE Extension Boards

• 

  DIO64 point

  INTERFACE

  [Features]
  · A 3.3V signal environment CPZ series CompactPCI I digital input/output interface module with 64 point TTL schmitt trigger input and 64 TTL open collector (with pull up resistor). Input/output common terminal. Data can be output in synchronization with the external circuit with an input handshake circuit. It is possible to acquire latch at all points simultaneously with an external signal. Supports reset signal output and external reset signal input. In addition, it has an interval timer.

  Standard Price:	SGD 888.09
  Days to Ship:	7 Day(s) or more

• 

  16-bit single phase pulse counter (4CH)

  INTERFACE

  16 bit 16 bit single phase pulse counter (4CH) type
  
  [Features]
  · A CompactPCI single phase pulse counter interface module with 16 bit 4 channels. Single phase pulse can be measured in 4 different count modes. The clock to be counted can be switched between internal and external. Can measure up to a maximum 10MHz pulse. Switch between non-isolated TTL input and photo coupler isolated input. In addition, it has an interval timer.

  Standard Price:	SGD 421.03
  Days to Ship:	6 Day(s) or more

• 

  DIO8/8 point insulation

  INTERFACE

  DIO8/8 point insulated input
  
  [Features]
  · a digital input/output product with 8 point digital signal input of sink type current drive photo coupler input compliant with PCI bus and
  8 digital signal output of high current open collector sink type output. The input section of this product is insulated from the PCI bus by a photo coupler. Since it has a timer counter, it can be used as an interval timer. Also supports reset signal input from the connector.

  Standard Price:	SGD 290.87-
  Days to Ship:	6 Day(s) or more

• 

  AD16 bit S16CH/DIO complex counter

  INTERFACE

  AD16-bit S16CH/DIO counter—complex type
  
  [Features]
  · Low Profile PCI compliant. 16-bit high speed AD conversion with single ended 16 channel FIFO/8-point digital input-output/1 channel 32-bit counter, multi-functional
  product. The AD conversion time is 10 μs when the channel is fixed and when switching the auto channel, and 20 μs when switching the software channel. In addition
  to software timing, AD conversion can be performed using an external trigger and/or programmable timer. At FIFO sampling setting, it supports external trigger, analog trigger, pre-trigger, post trigger function, counter match trigger function.
  There are 8 common digital input/output for external control (digital input/output and counter are shared).* This product switches multiple input channels with a multiplexer and performs AD conversion, so it can not sample multiple channels at the same time.
  * Auto channel switching mode: Automatically switches to the next channel via the hardware during AD conversion. This eliminates the need for software intervention and enables high-speed sampling. FIFO-method sampling uses auto channel switching.
  * Software channel switching mode: After channel switching by software, wait for the channel stabilization time before starting AD conversion. I/O method sampling uses software channel switching.

  Standard Price:	SGD 681.35
  Days to Ship:	6 Day(s) or more

• 

  DIO32 point TTL

  INTERFACE

  DIO32 point TTL
  
  [Features]
  · A CompactPCI digital input/output interface module
  with 32 point TTL schmitt trigger input and 32 point TTL open collector (with pull up resistor). Input/output common terminal. Data can be output in synchronization with the external circuit with an input handshake circuit. It is possible to acquire latch at all points simultaneously with an external signal. Supports reset signal output and external reset signal input. In addition, it has an interval timer.

  Standard Price:	SGD 322.69-
  Days to Ship:	6 Day(s) or more

• 

  CAN 64 Message FIFO Equipped

  INTERFACE

  CAN 64 message FIFO equipped type
  
  [Features]
  · 3.3 V signal environment, 3U size CompactPCI CPZ series. Low speed two-channel inter-channel isolated CAN interface product. SJA1000 is used for the CAN controller. Low-speed CAN channel uses TJA1054A for CAN transceiver, and it can communicate supporting Fault-tolerant CAN. The maximum communication speed is 125kbps. Each channel has a CAN controller, and it is possible to set different communication speeds. With the DIP switch, you can select the terminating resistor to be connected.
  Equipped with a large capacity FIFO for transmission and reception. Allows for easy and high-speed message transmission and reception without leakage. Equipped with CANbus test functionality for easy checking and analysis of CAN bus operation.

  Standard Price:	SGD 854.89
  Days to Ship:	6 Day(s) or more

• 

  10 MSPS S2CH simultaneous conversion AD 12 bit/DA 12 bit 1 CH

  INTERFACE

  10MSPS S2CH simultaneous conversion AD12 bit /DA12 bit 1CH type
  
  [Features]
  · A high-speed 12 bit AD conversion/12 bit DA conversion product conforming to the CompactPCI bus.
  It can sample up to 10MHz and it is a 2 channel input. 20MHz sampling can be realized by using two AD converters and sampling each with a clock whose phase is shifted by 180 degrees. It supports bus mastering burst transfer and scatter gathering method, enabling fast and large capacity DMA transfer. Supports external trigger, analog trigger, pre-trigger, post trigger function for trigger function. Further, it supports 1 channel DA output function. A BNC connector is used as an external connection connector, and connection with a measuring instrument can be performed easily.

  Standard Price:	SGD 1,712.42
  Days to Ship:	7 Day(s) or more

• 

  1 MSPS AD 12 bit D8/S16 CH

  INTERFACE

  1MSPS AD12 bitD8/S16CH type
  
  [Features]
  · CompactPCI analog input/output interface module with 12 bit 16 channel input and 12 bit 1 channel output.
  This module supports DMA transfer by the bus master method. It implements high-speed continuous sampling without imposing load on the CPU and provides high performance in a multitask environment. Sampling with external trigger, analog trigger can be performed. Sampling by external clock is possible. Multiple interface modules can be sampled with the same timing.

  Standard Price:	SGD 1,423.18-
  Days to Ship:	7 Day(s) or more

• 

  1 MSPS AD16 Bit D8/S16CH

  INTERFACE

  1MSPS AD16 bit D8/S16CH type
  
  [Features]
  · 3.3V signal environment 3U size CompactPCI CPZ series, high speed 16 bit AD conversion product. The AD conversion time is 1μs and high speed conversion is possible. It supports bus mastering burst transfer and scatter gathering method, enabling fast and large capacity DMA transfer. Single end 16 channels, differential 8 channel input. Supports external trigger, trigger by analog input, pretrigger, post trigger, counter value match trigger function. It also supports 1 channel counter functionality. There are 8 common digital input / output for external control. (The digital input/output and the counter are shared.) 96-pin half pitch connector is used as a connector.* This product switches multiple input channels with a multiplexer and performs AD conversion, so it can not sample multiple channels at the same time.* Also, you can not set the input range for each channel.

  Standard Price:	SGD 1,060.74
  Days to Ship:	6 Day(s) or more

• 

  20MSPS DO32 point TTL (DMA transfer)

  INTERFACE

  20MSPS DO32 point TTL (DMA transfer)
  
  [Features]
  · A digital output product with TTL level 32 point digital signal compliant with a PCI bus. Unlike ordinary digital output products that output data by I/O command, PCI-2472C is a bus master and supports DMA transfer that automatically outputs data stored in the memory space of the specified computer to the outside it is a product. For this reason, high-speed (up to 20MHz) data output (pattern output) can be performed without imposing a load on the CPU, and high I/O performance is provided in various computer environments. Since it has a timer counter, it can be used as an interval timer.
  

  Standard Price:	SGD 539.62
  Days to Ship:	6 Day(s) or more

• 

  8 axial insulation pulse motion controller (circular, linear interpolation)

  INTERFACE

  8 axis insulated pulse motion controller (circular arc, linear interpolation)
  
  [Features]
  · A motion controller product based on a PCI bus and incorporating 8 axis control circuit of stepping motor. Up to 8 motors can be controlled with a pulse train input type position control type motor driver. The four controlled axes can be
  operated independently of each other. Combined with the 1-4 axes in the parameter settings, interpolation operation can be performed with 5-8 axes. 2 PCL6045 (equivalent) is used as a controller. Because the controller supports S-shaped motion, it can make a smooth speed change at acceleration (deceleration).

  Standard Price:	SGD 1,841.69
  Days to Ship:	6 Day(s) or more

• 

  AD12 bit D8/S16CH

  INTERFACE

  AD12 bit D8/S16CH type
  
  [Features]
  · CompactPCI analog input interface module with 12-bit 16-channel input. A standard type interface module that can handle a variety of input sources with five input ranges. Sampling with external trigger, analog trigger can be performed. Sampling by external clock is possible. Multiple interface modules can be sampled with the same timing.

  Standard Price:	SGD 772.40-
  Days to Ship:	7 Day(s) or more

• 

  AD16 bit D8/S16CH FIFO (32K sample) equipped

  INTERFACE

  AD16 bit D8/S16CH FIFO (32K sample) installed type
  
  [Features]
  · A 16 bit AD conversion product with high performance, high speed, FIFO compliant with a PCI bus. Conversion time is fast 10 μs at fixed channel and 10 μs at channel switching in automatic channel switching mode. Single end 16 channels, differential 8 channel input. Trigger function is also enhanced, and in addition to pre-trigger, post trigger, it also supports trigger function by analog input.

  Standard Price:	SGD 1,784.74
  Days to Ship:	56 Day(s) or more

• 

  DIO16/16 point insulation

  INTERFACE

  DIO16/16 point insulated input type
  
  [Features]
  · 3.3V signal environment CPZ series CompactPCI digital input / output interface module with 16 point photo coupler input (supporting sink type output) and 16 point high current open collector output (sink type). Input and output part is insulated by a photo coupler in this module. Since it has a timer counter, it can be used as an interval timer.
  In addition, this product has an input/output control circuit. With this control signal, data can be input/output in synchronization with an external circuit. The input part can also be used as latch input or normal input (through input) by software setting. It also supports reset signal output and external reset signal input from the connector.
  

  Standard Price:	SGD 319.80-
  Days to Ship:	6 Day(s) or more

• 

  DIO32/32 point insulation

  INTERFACE

  DIO32/32 point insulated input type
  
  [Features]
  · 3.3V signal environment CPZ series CompactPCI digital input/output interface module with 32 point photo coupler input (supporting sink type output) and 32 point high current open collector output (sink type). This module requires an external power supply because it has an insulation power supply built-in.
  Data can be output in synchronization with the external circuit with an input handshake circuit.
  Supports reset signal output and external reset signal input. In addition, it has an interval timer.

  Standard Price:	SGD 538.67-
  Days to Ship:	4 Day(s) or more

• 

  DIO32/32 point CMOS 5V-48V/100mA

  INTERFACE

  DIO32/32 point CMOS 5V-48V/100mA
  
  [Features]
  · 32 point CMOS high voltage resistance input.
  · Input voltage: DC+5V to DC48V (maximum DC+50V).
  · Input response time: 0.5μs.
  · 32 point high current open collector output (sink type).
  · Output voltage: DC+5V to DC48V (maximum DC+50V).
  · Output response time: 1.0μs.
  · Non-isolated high speed input/output.
  · Input/output handshake function installed.
  · External interrupt input possible.
  · External reset input, with output function.
  · With interval timer.

  Standard Price:	SGD 483.16
  Days to Ship:	7 Day(s) or more

• 

  DMA forwarding GPIB 1CH

  INTERFACE

  DMA transfer GPIB 1CH type
  
  [Features]
  · 1 channel IEEE488 compliant CompactPCI GP-IB interface module. By installing the original controller, high speed at a low price can be achieved. This module supports DMA transfer by the bus master method. It implements high-speed continuous sampling without imposing load on the CPU and provides high performance and high-speed data transfer in a multitask environment. Depending on software GPC-4301N, it can be used from LabVIEW.
  

  Standard Price:	SGD 435.99-
  Days to Ship:	4 Day(s) or more

• 

  DO32 point insulation

  INTERFACE

  DO32 point isolated type.
  
  [Features]
  · A Low Profile PCI digital output product with 32 point high-current open collector output (sink type). Output section is insulated by photo coupler. Further, it requires an external power supply because it has an insulation power supply built-in. A wide input range type. Compatible with DC+5V to DC+24V (maximum rated voltage DC+30V). Data can be output in synchronization with the external circuit with an output handshake circuit. Supports reset signal output and external reset signal input. In addition, it has an interval timer.

  Standard Price:	SGD 435.49
  Days to Ship:	6 Day(s) or more

• 

  DO64 point

  INTERFACE

  [Features]
  · 3.3V signal environment with 64 points high current open collector output (sink type) CPZ series CompactPCI digital output interface module. Since this module has built-in insulation power supply, it is not necessary to supply external power to this module. (The power supply of the external load circuit is necessary.) The output is a wide range type compatible with DC+5V to DC+50V. Data can be output in synchronization with the external circuit with an output handshake circuit. Supports reset signal output and external reset signal input. In addition, it has an interval timer.

  Standard Price:	SGD 554.02
  Days to Ship:	7 Day(s) or more

• 

  PPI48 point TTL

  INTERFACE

  PPI48 input TTL
  
  [Features]
  · A CompactPCI PPI (Programmable Peripheral Interface) module with 48 TTL schmitt input and 48 TTL level output.
  Input/output common terminal. This module can use all 8255 modes. Supports reset signal output and external reset signal input. In addition, it has an interval timer.
  

  Standard Price:	SGD 425.31
  Days to Ship:	7 Day(s) or more

• 

  Timer (32 Bits, 1 Channel)

  INTERFACE

  Timer (32 bit 1CH) type
  
  [Features]
  · CompactPCI timer interface module with 1 channel 32 bit timer. Interval timer and free run counter are available. With an interval timer that can be set from 1 μs, highly accurate measurement control can be achieved. It can be used as OS timer with the application.

  Standard Price:	SGD 247.49
  Days to Ship:	6 Day(s) or more

• 

  Voltage/current output DA12 bit 4CH

  INTERFACE

  Voltage/current output DA12 bit 4CH (bus insulated) type
  
  [Features]
  · CompactPCI analog output interface module with 12 bit 4 channel output. Current output is possible. This module is bus insulated. The current loop detection is supported by the current loop. Output through external trigger and external clock possible. Multiple interface modules can be output with the same timing. Also supports reset signal input.
  

  Standard Price:	SGD 1,653.68
  Days to Ship:	6 Day(s) or more

Loading...