MISUMI Locating Pins（Page2）

• 

  Locating Pins - Large Head, Bullet Nose, Compact - Press Fit

  MISUMI

  R shape at insertion guide enables smooth insertion of workpiece. Compact Type with specifiable shorter L dimension.

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

• 

  Locating Pins - Large Head, Tapered (Threaded)

  MISUMI

  - Locating Pins - Large Head, Tapered (Threaded) from MISUMI.
  - Large Head, Tapered, Press Fit + Lock Nut Shape. Improved maintainability compared to Press Fit Type.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Polishing and centering hole sometimes not available for SUS304.
  - Provided 2 options of alteration, Wrench Hole Machining (LAC), or Wrench Flats (SC).
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Locating Pins - Large Head, Tapered - Threaded, Hex Socket

  MISUMI

  - Locating Pins - Large Head, Tapered - Threaded, Hex Socket from MISUMI.
  - Hex Socket is attached to the tip of Large Head, Tapered, Threaded. It is easy to mount as you can stop the head rotation.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Small Diameter Locating Pin - Small Head / Press Fit

  MISUMI

  - Small Diameter Locating Pin - Small Head / Press Fit from MISUMI.
  - Insertion Guide Tip Type can be selected 4 types, Tapered, Taper R, Spherical and Flat.
  - Material code SG and DG are applicable to L configurable type of sphere only.
  - L selectable type is applicable to spherical tip type only.
  - SUS304 may not be polished.
  - Chamfering of mounting portion and change of tolerance are available as alterations.
  - Shaft diameter can be configured up to 3 mm.
  

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Locating Pins - Press Fit

  MISUMI

  - Locating Pins - Press Fit from MISUMI.
  - Large Flat Head with each dimension configurable. The tolerances on both ends are also configurable.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Polishing and centering hole sometimes not available for SUS304.
  - Provided 3 options of alteration, Insertion guide (GDC), Air vent (AC), or C Chamfered Size Changes (CN).
  

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  MiSUMi Economy

  Locating Pins Large Head, Round Tapered, Press Fit

  MISUMI

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s)

• 

  Marker Pins - with Flathead Slot

  MISUMI

  - Marker Pins - with Flathead Slot, JPLB / JPLBK / JPLBM / JPLBS series from MISUMI.
  - Have the Flathead Slot provided and thus, can be mounted easily by using the screwdriver.
  - The material of marker pin can be selected 2 types, Steel S45C Equivalent, Stainless Steel SUS304.
  - SUS304 type marker pins may not be polished and may have no centering hole.
  - The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
  

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Locating Pins - Shouldered (Tapered - Shoulder Thickness Configurable-Press Fit)

  MISUMI

  - Locating Pins - Shouldered (Tapered - Shoulder Thickness Configurable-Press Fit) from MISUMI.
  - Insertion guide tip shape can be selected 2 types, round, and diamond.
  - SUS440C or 13Cr stainless has an identification groove on D part.
  - A machining step remains on the shoulder top for Diamond Shape.
  - SUS304 may not be polished and may have no centering hole.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Locating Pins-High Hardness Stainless Steel/R/Taper R/Press Fit

  MISUMI

  R and Taper R Types have been newly added to the High Hardness Stainless Steel Locating Pin product line-up. For orders of up to 1,000 pcs., 7th day shipping is available.

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

• 

  Positioning Pin - High Hardness Stainless Steel, Shouldered, Tepered Press Fit

  MISUMI

  Shouldered and Tapered Type has been newly added to the High Hardness Stainless Steel Locating Pin product line-up. For orders of up to 500 pcs., 5th day shipping is available.

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

• 

  [Clean & Pack] Small Diameter Locating Pin - Straight

  MISUMI

  Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
  This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

  ■Part Number for Clean & Pack Products

  ·Degreasing (Anti-rust single packing)	: Part Number SL-□□
  ·Precision cleaning (Degassing double packing)	: Part Number SH-□□
  ·Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

  Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
  SL-□□	Degreasing	Anti-rust packing	Oil removal	General environment	Regular assembly process
  					Post battery assembly process
  SH-□□	Precision cleaning	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
  					LCD-related post assembly process
  					In-vehicle camera assembly process
  SHD-□□	Electrolytic polishing + precision cleaning	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
  					Liquid crystal deposition process
  					Pre-OLED process

  ■Notes
  Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
  Please be careful about the application location and storage environment.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	7 Day(s) or more

• 

  MiSUMi Economy

  Locating Pins Large Head, Round Tapered, Configurable - Tolerance, Taper R Selectable, Press Fit

  MISUMI

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s)

• 

  MiSUMi Economy

  Locating Pins Large Head, Tapered, Configurable - Taper Angle, Tolerance Selectable, Press Fit

  MISUMI

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s)

• 

  MiSUMi Economy

  Locating Pins Large Head, Spherical, Tapped

  MISUMI

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s)

• • On Sale Till 31/03/2025

  

  Locating Pins - Sphere Small Head (Press Fit)

  MISUMI

  - Locating Pins - Sphere Small Head (Press Fit) from MISUMI.
  - The Sphere Head can prevent the mating material from being scratched even when you insert by sliding horizontally against the pin end.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polished, centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Insertion guide tip shape can be selected 2 types, round, and diamond.
  

  • Volume Discount

  CAD ：

  2D / 3D

  	Special Price
  Days to Ship:	Same day or more

• • On Sale Till 31/03/2025

  

  Locating Pins - Large Flat Head (Press Fit)

  MISUMI

  - Locating Pins - Large Flat Head (Press Fit) from MISUMI.
  - Flat Head Type. Suitable if the mating side has limited space.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Polished, centering hole is may not available for SUS304.
  - The material of locating pin can be selected 3 types, SKS3 Equivalent, SUS304, SUS440C or 13Cr stainless.
  - The insertion guide is applicable to tolerance p6 only.
  - The tolerance of locating pin head is h6.
  

  • Volume Discount

  CAD ：

  2D / 3D

  	Special Price
  Days to Ship:	Same day or more

• 

  Locating Pins - Flanged Flat

  MISUMI

  - Locating pins - flanged flat from MISUMI.
  - Insertion guide tip shape can be selected 2 types, round, and diamond.
  - Insertion guide tip type can be selected 2 types, Tapered (A shape), and Taper R (B Shape).
  - The flange of pin has 2 shapes available, round flange and compact flange.
  - It can be used by fixing the flange with bolts. 2 types of tip shapes are available.
  - The material of pin can be selected 2 types, SKS3 Equivalent or SUS304 Equivalent.
  

  CAD ：

  2D / 3D

  Days to Ship:	7 Day(s)

• 

  Plate Centering Pins

  MISUMI

  - Plate Centering Pins, BCMPA / CMPA / SCMPA series from MISUMI.
  - Suitable for centering thin objects.
  - Can be used for attaching gripper.
  - Center holes may disappear depending on dimension B.
  - The material of pin can be selected 2 types, steel S45C Equivalent or stainless steel SUS304.
  - SUS304 Plate Centering Pins may not be polished and may have no centering hole.
  - When the L dimension of tapped type is less than Mx4, the tapped hole or pilot hole for tapping may go through.
  

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Feed Pins - Shouldered - Threaded

  MISUMI

  Locating Pins with the tapered part configurable to be longer. The Shoulder supports the workpiece so that it will not damage the base.

  CAD ：

  2D / 3D

  Days to Ship:	7 Day(s)

• 

  Small Diameter Locating Pin - Shouldered, Threaded

  MISUMI

  - Small Diameter Locating Pin - Shouldered, Threaded from MISUMI.
  - Insertion Guide Tip Type can be selected 4 types, Tapered, Taper R, Spherical and Flat.
  - The material of pin can be selected 2 types, SK95 (SK4) Equivalent and SUS304.
  - The hardness of steel pin is 50～58HRC.
  - SUS304 may not be polished.
  - When L=0, an undercut will be added at the neck of the thread.
  - Shaft diameter can be selected up to 4 mm.
  

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Press Fit

  MISUMI

  - Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Press Fit from MISUMI.
  - Sphere Large Head with each dimension configurable. The tolerances on both ends are also configurable.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Hard Chrome Plating and buff finished products are not available in Precision Grade Tolerance.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Polishing and centering hole is sometimes not available for SUS304.
  - When the P dimension is small, a centering hole will cause the sphere section to become small.
  

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Locating Pins for Height Adjusting - Large Head Threaded

  MISUMI

  Locating pins for printed circuit boards. B dimension is fixed short for thin boards. Reasonably priced.

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s)

• 

  MiSUMi Economy

  Locating Pins Large Head, Tapered, Press Fit, Standard

  MISUMI

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s)

• 

  MiSUMi Economy

  Locating Pins Large Head, Spherical, Press Fit, Standard

  MISUMI

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s)

• 

  Pusher Pins - Straight

  MISUMI

  - Pusher Pins – Straight from MISUMI.
  - Insertion Guide Tip Type can be selected 4 types, Tapered, Taper R, Spherical and Flat.
  - The material of pin can be selected 3 types, Conductive MC Nylon CDR2 (Black), PEEK (Natural Ivory), Polyacetal (White).
  - The outer diameter of pin can be selected 7 sizes, 6, 8, 10, 12, 15, 20 and 25 mm.
  - The mounting thread length is M x 2. (When L<20, the mounting thread length is M x 1.5).
  

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Feed Pins - Solid - Press Fit

  MISUMI

  - Feed Pins - Solid - Press Fit from MISUMI.
  - Length of tapered part can be specified depending on applications or environment. It is installed by press-fitting.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - SUS304 feed Pins may not be polished and may have no centering hole.
  - The outer diameter of the mounting part can be selectable from 2 mm to 10 mm.
  - The outer diameter of the feed pin tip can be selectable from 2.5 mm to 13 mm.
  

  CAD ：

  2D / 3D

  Days to Ship:	7 Day(s)

• 

  Locating Pins - High Hardness Stainless Steel, Large Flat Head (Press Fit)

  MISUMI

  - Locating Pins - High Hardness Stainless Steel, Large Flat Head (Press Fit)
  - Large Flat Head with each dimension configurable. We reduced the price drastically compared to the conventional products.
  - If the diameter of locating pin exceeds Ø10, core hardness may be 30HRC~.
  - The tightening torque (ref. value) for hardened products is strength class 10.9. Not applicable when using locking materials or lock washers.
  - The material of this locating pin is made of High hardness stainless steel.
  

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

• 

  Locating Pins - High Hardness Stainless Steel, Straight (Tapped)

  MISUMI

  - Locating Pins - High Hardness Stainless Steel, straight (Tapped) from MISUMI.
  - The sphere head can prevent the mating side from being scratched. Selectable tolerance with each dimension configurable.
  - The tightening torque (ref. value) for hardened products is strength class 10.9. Not applicable when using locking materials or lock washers.
  - For tapped type, unless described otherwise on the drawing, the spec. design is the same as for Press Fit Type. For D Tolerance g6, h7, no Insertion guide is provided. (ℓ1)
  

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

• 

  Locating Pins - Straight, Tapered (Tapped)

  MISUMI

  - Locating Pins - Straight, Tapered (Tapped) from MISUMI.
  - The short lead time and economical price are achieved by narrowing down the tolerance and dimensions.
  - The material of pin can be selected 2 types, steel SKS3 Equivalent or stainless steel SUS304.
  - On some combination of dimensions, the center hole may not be available.
  - Polishing and centering hole is sometimes not available for SUS304.
  - The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
  

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Locating Pins-High Hardness Stainless Steel/R/Taper R/Threaded

  MISUMI

  R and Taper R Types have been newly added to the High Hardness Stainless Steel Locating Pin product line-up. For orders of up to 1,000 pcs., 7th day shipping is available.

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

• 

  Locating Pin High Hardness Stainless Steel Taper with Flange - Female Thread -

  MISUMI

  Shouldered and Tapered Type has been newly added to the High Hardness Stainless Steel Locating Pin product line-up. For orders of up to 500 pcs., 5th day shipping is available.

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

• 

  MiSUMi Economy

  Locating Pins Large Head, Tapered, Threaded, Hex Socket

  MISUMI

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s)

• 

  MiSUMi Economy

  Locating Pins Small Head, Spherical, Press Fit, Standard

  MISUMI

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s)

• 

  Locating Pins - Sphere Large Head (Threaded)

  MISUMI

  - Locating Pins - Sphere Large Head (Threaded) from MISUMI.
  - Sphere Large Head, Threaded + Lock Nut Type. Improved maintainability compared to Press Fit Type.
  - Polished, Centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
  - Provided 3 options of alteration, Sphere tip (RC), Wrench Hole Machining (LAC), or Wrench Flats (SC).
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Locating Pins - Small Flat Head (Press Fit)

  MISUMI

  Flat Head Type. Suitable if the mating side has limited space.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Small Diameter Locating Pin - Shouldered, Press Fit

  MISUMI

  - Small Diameter Locating Pin - Shouldered, Press Fit from MISUMI.
  - Insertion Guide Tip Type can be selected into 4 types, Tapered tip, Taper R tip, Spherical tip, and Flat tip.
  - The material of locating pin can be selected 2 types, Steel SK95(SK4) Equivalent, Stainless Steel SUS304.
  - SUS304 may not be polished.
  - The hardness level of SK95 (SK4) Equivalent is 50～58HRC.
  - The outer diameter of the locating pin can be selectable up to 4 mm.
  

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Locating Pins - Plastic, Small Head

  MISUMI

  - Locating Pins - Plastic, Small Head from MISUMI.
  - A Small Head Plastic Locating Pins which prevent workpiece damages.
  - Insertion guide tip type can be selected 3 types, Tapered, Flat and Spherical.
  - The outer diameter tolerance is the result of measurement at room temperature.
  - The material of locating pin can be selected 4 types, Polyacetal (Black), MC Nylon (Blue), Conductive MC Nylon CDR2 (Black), or PEEK (Natural Ivory).
  - The mounting method is press fit, with m6 tolerance.
  

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

• 

  Tapered Plunging Locating Pin

  MISUMI

  - Tapered Plunging Locating Pin, PICP series from MISUMI.
  - The tapered section holds a workpiece, which enables positioning without wobbling.
  - The pin of Tapered Plunging Locating Pin, PICP series is made of SKD11 with hardness level at 60～63HRC.
  - The body of Tapered Plunging Locating Pin, PICP series is made of S45C.
  - The spring part of Tapered Plunging Locating Pin, PICP series is made of SWP-B.
  - Variation of PICP series have 2 types available, PICP6 or PICP10.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 82.55-
  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - Small Head, Round Tapered - Threaded

  MISUMI

  Large Head, Tapered, with the configurable dimension for each part. The tolerances on both ends and the tapered dimensions are also configurable.

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Locating Pins - Large Head Tapered (Plastic Tip - Press Fit)

  MISUMI

  - Locating Pins - Large Head Tapered (Plastic Tip - Press Fit) from MISUMI.
  - Plastic material bonded to the tip of insertion guide prevents the workpiece from being scratched.
  - SUS304 locating Pins may not be polished and may have no centering hole.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
  

  CAD ：

  2D / 3D

  Days to Ship:	8 Day(s) or more

• 

  Locating Pins for Grippers - Stepped

  MISUMI

  [Features]Positioning pin stepped type used for mounting an opening / closing chuck.

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Locating Pins - Large Flat Head (Tapped)

  MISUMI

  - Locating Pins - Large Flat Head (Tapped) from MISUMI.
  - Large Flat Head with the shape designed to be mounted from back using bolts. Improved maintainability compared to Press Fit Type.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polished, centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - The tolerance of the mounting part is g6.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Locating Pins - Large Flat Head (Threaded)

  MISUMI

  - Locating Pins - Large Flat Head (Threaded) from MISUMI.
  - Large Flat Head, Press Fit + Lock Nut Type. Improved maintainability compared to Press Fit Type.
  - Polished, Centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
  - Provided 4 options of alteration, Sphere tip (RC), C Chamfered size (CN), Hex Socket Machining (RAC) or Wrench Hole Machining (LAC)
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Locating Pins - Screw Mounted

  MISUMI

  "The pin body is secured by the bolts. Can be used even on portions where the tapped screws cannot be used, because the bolt can be tightened from the top of the insertion guide."

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Pusher Pins - Small Head

  MISUMI

  A Small Head Plastic Pin used as the Workpiece Holder.

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

Loading...