MISUMI Hose, Tube

• 

  Mold-Cooling Flexible Hoses

  MISUMI

  [Features]
  · Flexible hose is more flexible than conventional metal flexible hoses.
  ・ The hose section is closely braided simultaneously with PTFE extrusion molding, so the impact pressure resistance is improved.
  
  [Heat and cold resistance]
  · It can be used continuously under the temperature condition of -54 ° C to + 200 ° C. However, only when using this product alone.
  
  [Non-absorbable]
  · Since PTFE does not absorb water, fluid does not bleed on the outside of the pipe.
  
  [Storage life]
  · PTFE has less deterioration over time like rubber hoses, and its storage life is improved.
  
  [Available fluid] water, oil

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 94.15-
  Days to Ship:	4 Day(s) or more

• 

  Hot-Water Tubes

  MISUMI

  [M-NB]
  [materials] PA12
  [specification temperature range] -15 to 90 ° C
  [color] blue, milky white
  
  [M-WE]
  [materials] polyolefin system
  [specification temperature range] 0 to 99 ° C (water) -30 to 30 99 ° C (air)
  [color] milky white
  
  [M-SET]
  [materials] fluorocarbon resin
  [specification temperature range]-65 to 200 ° C
  [color] black , transparent
  
  [M-SFT]
  [materials] fluorocarbon resin
  [specification temperature range]-65 to 260 ° C
  [color] transparent
  
  ● Before use,
  select one tube according to the temperature of cooling water Please give me.
  2 Tubes can be used with both cooling water and oil. (※ M-WE is only water)
  3 When inserting a tube into a mold cooling one-touch joint or tightening joint, cut both ends of the tube at a right angle before use.
  Be careful when the end face of the tube is cut diagonally, as it may cause dropout of the tube or water leakage trouble.
  4 Attach the hot water tube to the one-touch fitting in combination with the dedicated insert sleeve .
  Please note that using a hot water tube without an insert sleeve may cause the tube to come off or leak problems.
  (5) The breaking pressure of the hot water tube (M-SFT) decreases as the temperature rises. Therefore, when using at high temperatures, check the breaking pressure table in [Standards / Delivery tab] before using.
  6 Tightening Fittings StraightWhen reattaching the tube to the tightening joint L-shape , cut the part once attached and then attach it.
  Keep in mind that it may cause drop-off of the tube and water leakage if it is installed as it is.
  

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Silicone Hose for High Temperature Water (Heat resistance 170°C)

  MISUMI

  [Features]
  - Resistant to coolant, freeze bursting, cracking, aging, and ozone. (SAE J20R3 Class A)
  [Applications]
  ・Water
  [Operating temperature range]
  ・-54 to 170℃
  [Material]
  ・Silicon (inside/outside) 3-layer structure with polyester fiber reinforcement

  Standard Price:	SGD 37.46-
  Days to Ship:	6 Day(s)

• 

  MOLD-COOLING FLEXIBLE HOSES (STAINLESS STEEL)

  MISUMI

  [Bending radius]
  · Bending radius is about 1/3 compared to conventional stainless steel flexible hoses ( SUS-TKSP, SUS-TKSF ) .
  
  [Corrosion resistance]
  · It is a product using stainless steel and is excellent in corrosion resistance.
  
  [Non-absorbable]
  · Since PTFE does not absorb water, fluid does not bleed on the outside of the pipe.
  
  【Storage Life】
  ・ PTFE has less deterioration over time like rubber hoses, and its storage life is improved.
  
  [Available fluid] -Water, oil
  
  [Operating temperature range (in single use)]
  -30 ° C to 180 ° C

  CAD ：

  2D / 3D

  Days to Ship:	8 Day(s) or more

• 

  Rubber Hose For High-Temperature Water

  MISUMI

  [Use temperature range]
  -30-120 degrees Celsius
  [application fluid] water

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

• 

  High-Temperature Rubber Hose -Heat-Resistant 120degree・Heat-Resistant 150degree-

  MISUMI

  [KGHA]
  [Operating temperature range] -30 to 120 ° C
  [Maximum operating pressure] 1.5MPa
  [Application fluid] Water / oil
  
  [WHSG]
  Operating temperature range] -30 to 150 ° C
  [Maximum operating pressure] 1.0MPa
  [Application fluid ] water
  
  [corresponding plug (Dimensions tab plug connection according to "caulking fitting · a shape (female)") ,
  high temperature hose dedicated plug (FSHG, FSHGR, FSHL)
  - high temperature hose dedicated plug (FSHLR, FSHLS)

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

• 

  Mold-Cooling Flexible Hoses (Stainless Steel)

  MISUMI

  A15A standard has been added!
  [Features]
  ・Excellent flexibility compared to metal flexible hoses.
  ・The internal hose uses fluororesin (PTFE).
  [Corrosion Resistance]
  ・This product is made of stainless steel and has excellent corrosion resistance.
  [Non-absorbent]
  ・PTFE does not absorb moisture, so fluid will not seep out to the outside of the pipe.
  [Storage Life]
  ・PTFE has less deterioration over time like rubber hoses, and has an improved storage life.
  [Usable fluid]
  ・Water, oil
  [Usable temperature range (when used alone)]
  ・-54℃ to 200℃

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

• 

  CAULKING HOSE FOR TEMPERATURE ADJUSTMENT(Heat resistance 120°C: for water and oil)

  MISUMI

  [KGHA-S]
  [Operating temperature range] -30 to 120 ° C
  [Maximum operating pressure] 1.5MPa
  [Application fluid] Water / oil
  
  [Dedicated nipple]
  Heat-conditioning crimp hose dedicated nipple (KWSN)

  CAD ：

  2D / 3D

  Standard Price:	SGD 50.36-
  Days to Ship:	6 Day(s)

• 

  A flexible hose which protect the wire braid surface with a spring

  MISUMI

  [Features]
  -A flexible hose that protects the wire blade surface with a spring.
  ・ Spring protects the exterior surface and prevents damage to the blade and crushing of the hose.
  ・ Because the spring fixes the root of the connection, it has a structure resistant to bending.
  
  [Use temperature range]
  ・ -50 ° C-200 ° C

  CAD ：

  2D / 3D

  Standard Price:	SGD 146.00-
  Days to Ship:	8 Day(s)

• 

  CAULKING HOSE FOR TEMPERATURE ADJUSTMENT (Heat resistance 150°C: for water)

  MISUMI

  
  [Operating temperature range] Water: -30 to 100℃, Air: -30 to 150℃
  [Maximum operating pressure] 1.0MPa
  [Applicable fluid] Water/air

  CAD ：

  2D / 3D

  Standard Price:	SGD 89.64-
  Days to Ship:	6 Day(s)

• 

  Resin Hose for Temperature Control

  MISUMI

  [Features]
  ・A general-purpose hose with excellent transparency.
  ・Please use with water below 60℃
  

  Standard Price:	SGD 6.29-
  Days to Ship:	8 Day(s)

Loading...