ONDASEISAKUSYO Ball Valves（Handle Shape：Lever）

• 

  Free Ball, M3 Type, R Screw x R Screw

  ONDASEISAKUSYO

  • M3 Series Brass Ball Valve -PT Male Connection.
  • Main body ball valves shape: straight.
  • M3 Ball valve 2 type are available full bore and reduced bore.
  • M3 Body material: Brass (B3771BE).
  • Cap and Ball material: Brass B3604BE for ball chrome plating.
  • O-Ring material is NBR (Nitrile Rubber)• Ball seal material: PTFE.
  • Handle material: POM (With cover PP).
  • Handle Shape: Lever handle type.
  • Applicable Fluid: Hot and cold Water, Oil and Air.
  • Maximum Operation Pressure: 1.0 MPa.
  • Operation Temperature: -20 to 80 °C.
  

  CAD ：

  2D

  Standard Price:	SGD 12.96-
  Days to Ship:	7 Day(s) or more

• 

  Ball Valves, Full-Bore, Oversized Ball Type, Green Lever Handle, FF Type

  ONDASEISAKUSYO

  Full-bore designed to the same nominal diameter as the pipe. Optimal for use in large flow-rate pipelines.

  CAD ：

  2D

  Standard Price:	SGD 23.51-
  Days to Ship:	4 Day(s) or more

• 

  FF Type (Full Bore) Ball Valve for Fire Extinguishing Facilities, Lever Handle

  ONDASEISAKUSYO

  [Features]
  • Certified for fire-fighting and accident prevention.
  • Fire and Disaster Management Agency Initiative certification was obtained following development according to conventional performance evaluation standards in accordance with the Fire Service Law (notice December 26, 2008).
  • As a result, there was no distinction between wet and dry in the performance evaluation, and a new performance test was added.
  • A "Proof of Certification" seal is attached to each certified product.
  • Products on which "Proof of Certification" is regarded as compliant with technical standards for equipment, etc. set by the national government, and fire departments are not required to performed individual performance validation testing.
  • The nominal diameters (A) listed on the parts list are fire

  CAD ：

  2D

  Standard Price:	SGD 38.91-
  Days to Ship:	7 Day(s) or more

• 

  Ball Valves, FF Type (Full-Bore) Green Lever Handle

  ONDASEISAKUSYO

  Full-bore designed to the same nominal diameter as the pipe. Optimal for use in large flow-rate pipelines.

  CAD ：

  2D

  Standard Price:	SGD 27.50-
  Days to Ship:	7 Day(s) or more

• 

  Ball Valve, FS Type, Green Lever Handle

  ONDASEISAKUSYO

  Applicable fluids: Suitable for piping cold water / antifreeze / oil / air.

  CAD ：

  2D

  Standard Price:	SGD 22.92-
  Days to Ship:	7 Day(s) or more

• 

  F Type (Standard Bore), Ball Valve, Regular Ball, Lever Handle

  ONDASEISAKUSYO

  • F Type Regular Ball Valve 400psi
  • ONDA MFG product code: F
  • F ball valve is standard bore type.
  • Main body ball valves shape: straight.
  • Body material: Brass B3771BE.
  • Cap and Ball material: Brass B3604BE for ball chrome plating.
  • O-Ring material is Fluoroelastomer Rubber FKM.
  • Ball seal material: PTFE.
  • Handle material: SUS (With handle cover PP).
  • Handle Shape: Lever
  handle type.
  • Applicable Fluid: Hot and cold Water, Oil, Air.
  • Operating pressure: 2.8MPa for (-15 to 70°C) / 0.5MPa for (150°C or less)
  

  CAD ：

  2D

  Days to Ship:	7 Day(s) or more

• 

  T Type (Three-way) Ball Valve, Lever Handle

  ONDASEISAKUSYO

  Applicable fluids: Suitable for piping hot and cold water / antifreeze / oil.

  CAD ：

  2D

  Standard Price:	SGD 26.81-
  Days to Ship:	7 Day(s) or more

• 

  E-Bowl, ME3, R Screw x R Screw

  ONDASEISAKUSYO

  Small ball valve with a simple design and reasonable price. The single-touch detachable handle allows easy installation.
  
  [Features]
  · Reasonable because the distance between faces is shorter and the number of parts are smaller than those of free ball and miniature ball valves.
  · Does not hinder installation with single-touch removal type handle.

  CAD ：

  2D

  Days to Ship:	7 Day(s) or more

• 

  Double Lock Valve, WB2, Tapered Female Screw, Single-Touch Detachable Handle

  ONDASEISAKUSYO

  Compact and neat piping can be achieved by integration of the piping adapter and ball valve stopcock.

  Standard Price:	SGD 38.85-
  Days to Ship:	7 Day(s) or more

• 

  FF Type (Full-Bore) Ball Valve, Full Bore, Orange Lever Handle

  ONDASEISAKUSYO

  It is ideal for piping with large flow rates because of the same full-bore design as the nominal diameters of piping.

  CAD ：

  2D

  Standard Price:	SGD 23.51-
  Days to Ship:	7 Day(s) or more

• 

  FS Type (Reduced Bore) Ball Valve, Lever Handle

  ONDASEISAKUSYO

  • FS Series Regular Ball Valve 600PSI
  • ONDA MFG product code: FS.
  • FS ball valve is reduced bore type.
  • Main body ball valves shape: straight.
  • Body material: Brass B3771BE.
  • Cap and Ball material: Brass B3604BE for ball chrome plating.
  • O-Ring material is Fluoroelastomer Rubber FKM.
  • Ball seal material: PTFE.
  • Handle material: ZDC2 (With handle cover PP).
  • Handle Shape: Lever
  handle type.
  • Applicable Fluid: Hot and cold Water, Oil, Air.
  • Operating pressure: 4.2MPa for (-15 to 70°C) / 0.5MPa for (150°C or less)
  

  CAD ：

  2D

  Standard Price:	SGD 19.76-
  Days to Ship:	4 Day(s) or more

• 

  Free Ball (Angled), ML3 Type, R Thread × R Thread

  ONDASEISAKUSYO

  [Features]
  ・ The standard handle (green) is compact and convenient for opening and closing in tight spaces. It can be closed by turning the handle clockwise when shipped.
  ・ By integrating space saving ball valve and fitting, the piping space can be reduced to 1/2 of the conventional type.
  ・ Handle position and opening/closing direction can be freely changed depending on piping
  [Applications]
  ・ Pneumatic equipment such as compressors
  ・ Machine tools and equipment
  ・ Copper pipe distribution equipment
  ・ Small pump accessory
  ・ Ships, agricultural equipment
  ・ Instrumentation equipment
  ・ Other industrial machine and equipment

  CAD ：

  2D

  Standard Price:	SGD 20.35
  Days to Ship:	7 Day(s) or more

• 

  MR Type (Miniature) Ball Valve MR1 R Screw × R Screw

  ONDASEISAKUSYO

  Applicable fluids: Suitable for piping cold water / antifreeze / oil / air.

  CAD ：

  2D

  Standard Price:	SGD 16.39-
  Days to Ship:	7 Day(s) or more

• 

  Double Lock Valve, WB1 Type, Taper Male Screw, Single-Touch Removable Handle, Made of Brass

  ONDASEISAKUSYO

  It can be connected to resin conduit using a single-action. The "double-lock structure" fixes firmly, and the "double-seal structure" eliminates risk of water leakage. The tapered male thread of this product can be connected to a flexible pipe.

  Standard Price:	SGD 38.85-
  Days to Ship:	7 Day(s) or more

• 

  Double-Lock Valve, WB5 Type, Tapered Male Thread, Single-Touch Removable Handle, Bronze

  ONDASEISAKUSYO

  Single-touch connection to resin pipes. The 'double-lock structure' secures to the 'double-seal structure' without risk of water leakage. The R thread of this product is connectable to flexible piping.

  Standard Price:	SGD 47.71-
  Days to Ship:	7 Day(s) or more

• 

  Double Lock Valve, WB24 Type, Adapter with Nut

  ONDASEISAKUSYO

  It is a ball valve with an outer diameter seal that allows for a wide flow path and large flow rate.
  [Features]
  ・ It is a brass ball valve suitable for single-action construction of cross-linked polyethylene pipes / polybutene pipes and for connecting to parallel male threads
  ・ It is a product manufactured in Japan
  ・ Single-action connection to the pipe for excellent workability
  ・ Single-action connection of resin conduit is possible
  ・ The "double-lock structure" fixes firmly, and「the "double-seal structure" that eliminates risk of water leakage」
  [Applications]
  ・ It is ideal for water piping that requires a ball valve because it can construct securely with single-action

  CAD ：

  2D

  Standard Price:	SGD 38.85-
  Days to Ship:	7 Day(s) or more

• 

  Double Lock Valve, WB12 Type, Intermediary Valve

  ONDASEISAKUSYO

  It can be connected to resin conduit using a single-action. The "double-lock structure" fixes firmly, and the "double-seal structure" eliminates risk of water leakage.

  Standard Price:	SGD 47.33-
  Days to Ship:	7 Day(s) or more

• 

  Double Lock Valve, WB27 Type, Parallel Male Screw, Made of Brass

  ONDASEISAKUSYO

  Brass ball valve for connecting to parallel female threads.
  [Features]
  ・ It is ideal for single-action construction of cross-linked polyethylene pipe / polybutene pipe
  ・ Adjustable flow rate to save water
  ・ It can pipe neatly with single-action connection. It is a product manufactured in Japan
  ・ An outer diameter seal allows for a wide flow path and large flow rate.
  ・ Single-action connection to the pipe for excellent workability
  ・ The normal ball valve is used with the valve fully open and fully closed, but this product is a special ball valve with adjustable flow rate (intermediate opening/closing).
  ・ Adjusting the direction of the handle (milling machine) can easily save water, etc.
  [Applications]
  ・ It is ideal for water piping that requires a ball valve (ball valve stopcocks for washbasins and sinks)

  Standard Price:	SGD 49.16
  Days to Ship:	7 Day(s) or more

• 

  Double Lock Valve WB10L for Toilet Angle Ball Valve

  ONDASEISAKUSYO

  [Features]
  ▪ Compared to general pipes, there are fewer connections and the risk of leaks is reduced.
  ▪ Reduces effort required to connect during installation.
  ▪ The ball valve function 90° opening and closing is an easy operation.
  ▪ The flow can be simply adjusted with the orientation of the handles (0° to 90°).
  ▪ Compact and neat piping can be achieved by integration of the piping adapter and ball valve stop cock.
  ▪ The mounting screws can also be hidden neatly by affixing the included cosmetic sticker to the seat.

  CAD ：

  2D

  Standard Price:	SGD 56.96
  Days to Ship:	7 Day(s) or more

• 

  CAPORI 2 Ball Valve, KSB1 Type, Tapered Male Screw

  ONDASEISAKUSYO

  The additional construction-check mechanism and new stepped shape provides reliability and a solid connection.

  CAD ：

  2D

  Standard Price:	SGD 39.89-
  Days to Ship:	7 Day(s) or more

• 

  CAPORI 2 Ball Valve, KSB2, Tapered Female Screw

  ONDASEISAKUSYO

  The addition of an installation-check mechanism and new stepped design provides reliability and a solid connection.
  
  [Features]
  · Designed with a split ring that features a larger protrusion for secure assembly to the barb grooves of the main body after tightening the cap nut.
  · Pull-out strength and sealing performance have been improved.
  · A side hole (check window) can be included in the main body to visually check insertion of the pipe following connection.
  · Completion of nut tightening can be confirmed by examining whether the split ring is protruding from the end face of the cap nut.
  · Easy to tighten. Tightening torque is reduced from 40 N·m to 25 N·m (*compared with MISUMI's nominal diameter of 13).

  CAD ：

  2D

  Standard Price:	SGD 39.89-
  Days to Ship:	7 Day(s) or more

• 

  Ball Valve, M1 Type Free Ball

  ONDASEISAKUSYO

  Space-saving piping. Handle position and direction of opening and closing can be freely adjusted depending on your piping needs.

  CAD ：

  2D

  Standard Price:	SGD 22.06-
  Days to Ship:	7 Day(s) or more

• 

  FF2 Type (Full-Bore) Ball Valve, Compact Full Bore, Green Lever Handle

  ONDASEISAKUSYO

  Compact type with short face-to-face dimension is now available for full-bore ball valves. The pressure resistance is also improved.
  [Features]
  · A compact design. Compared to the FF type (full ball), the face-to-face dimension is shorter, space saving piping is possible, and it is a good value.
  ・ Pressure resistance performance is increased. Maximum allowable working pressure is 4.2 MPa (600 psi) with thick wall design

  CAD ：

  2D

  Standard Price:	SGD 19.47-
  Days to Ship:	4 Day(s) or more

• 

  F2 Type (Standard Bore) Ball Valve, Compact Ball, Lever Handle

  ONDASEISAKUSYO

  The flow rate is almost the same as regular balls, and the compact design allows space saving piping.

  CAD ：

  2D

  Standard Price:	SGD 27.36-
  Days to Ship:	7 Day(s) or more

• 

  B3 Type (Bronze), Ball Valve, Lever Handle

  ONDASEISAKUSYO

  Product conforming to the public building construction standard specifications documents issued by the Ministry of Land, Infrastructure, Transport and Tourism of Japan.

  CAD ：

  2D

  Standard Price:	SGD 68.24-
  Days to Ship:	7 Day(s) or more

• 

  Free Bore, M1, R Type, Rc Screw x Rc Screw

  ONDASEISAKUSYO

  Operation made easier via use of a long handle. Space-saving piping. Handle position and opening and closing direction can be adjusted depending on the customer's piping needs.
  
  [Features]
  · The grip is 15 mm longer than a standard (green) handle and it is easy to grasp, so opening and closing is easy.
  · The handle's opening and closing direction is counterclockwise, which is the opposite of a standard (green) handle (when shipped).
  · Piping space is reduced by about 1/2 of conventional types thanks to integration of a space-saving ball valve and fitting.
  · Handle position and direction of opening and closing can be freely adjusted depending on the customer's piping needs.
  · Refer to the following handle position changing procedure for changing the handle position.

  CAD ：

  2D

  Standard Price:	SGD 19.03-
  Days to Ship:	3 Day(s) or more

• 

  Free Ball, M2 Type, R Type, Rc Screw × R Screw

  ONDASEISAKUSYO

  Operation made easier by adoption of long handle. Space-saving. Handle position and direction of opening and closing can be adjusted depending on your piping needs.

  CAD ：

  2D

  Standard Price:	SGD 19.03-
  Days to Ship:	7 Day(s) or more

• 

  Free Ball, M3 Type, R Type, R Screw × R Screw

  ONDASEISAKUSYO

  Operation will be easier by adopting long handle . Space-saving piping. Handle position and direction of opening and closing can be adjusted depending on your piping needs.

  CAD ：

  2D

  Standard Price:	SGD 19.03
  Days to Ship:	7 Day(s) or more

• 

  Free Ball, M5, R Type, R Thread × Hose Nipple

  ONDASEISAKUSYO

  Utilizes an easy-to-operate long handle. Space-saving piping. The position of the handle and its opening and closing direction can be changed to suit the piping layout.

  CAD ：

  2D

  Standard Price:	SGD 20.35
  Days to Ship:	7 Day(s) or more

• 

  Free Ball M8 Type, R Type, R Screw × Ring Joint

  ONDASEISAKUSYO

  Operation made easier by adoption of long handle. Space-saving. Handle position and direction of opening and closing can be adjusted depending on your piping needs.

  CAD ：

  2D

  Standard Price:	SGD 22.19
  Days to Ship:	7 Day(s) or more

• 

  Free Ball, M1 Type, Rc Screw x Rc Screw

  ONDASEISAKUSYO

  Space-saving piping. Handle position and direction of opening and closing can be freely adjusted depending on your piping needs.

  CAD ：

  2D

  Standard Price:	SGD 19.03-
  Days to Ship:	4 Day(s) or more

• 

  Free Ball, M2 Type, Rc Screw x R Screw

  ONDASEISAKUSYO

  [Features]
  ・ The standard handle (green) is compact and convenient for opening and closing in tight spaces. It can be closed by turning the handle clockwise when shipped.
  ・ By integrating space saving ball valve and fitting, the piping space can be reduced to 1/2 of the conventional type.
  ・ Handle position and opening/closing direction can be freely changed depending on piping
  [Applications]
  ・ Pneumatic equipment such as compressors
  ・ Machine tools and equipment
  ・ Copper pipe distribution equipment
  ・ Small pump accessory
  ・ Ships, agricultural equipment
  ・ Instrumentation equipment
  ・ Other industrial machine and equipment

  CAD ：

  2D

  Standard Price:	SGD 19.03-
  Days to Ship:	4 Day(s) or more

• 

  Free Ball, M5 Type, R Screw × Hose Nipple

  ONDASEISAKUSYO

  Space-saving piping. Handle position and direction of opening and closing can be freely adjusted depending on your piping needs.

  CAD ：

  2D

  Standard Price:	SGD 20.35
  Days to Ship:	7 Day(s) or more

• 

  Free Ball, M6, R Screw × Hose Joint

  ONDASEISAKUSYO

  Space-saving piping. Handle position and direction of opening and closing can be freely adjusted depending on your piping needs.

  CAD ：

  2D

  Standard Price:	SGD 22.62-
  Days to Ship:	7 Day(s) or more

• 

  Free Ball, M7, R Thread × Air Plug

  ONDASEISAKUSYO

  [Features]
  ・ The standard handle (green) is compact and convenient for opening and closing in tight spaces. It can be closed by turning the handle clockwise when shipped.
  ・ By integrating space saving ball valve and fitting, the piping space can be reduced to 1/2 of the conventional type.
  ・ Handle position and opening/closing direction can be freely changed depending on piping
  [Applications]
  ・ Pneumatic equipment such as compressors
  ・ Machine tools and equipment
  ・ Copper pipe distribution equipment
  ・ Small pump accessory
  ・ Ships, agricultural equipment
  ・ Instrumentation equipment
  ・ Other industrial machine and equipment

  CAD ：

  2D

  Standard Price:	SGD 25.21
  Days to Ship:	7 Day(s) or more

• 

  Free Ball, M8 Type, R Screw × Ring Joint

  ONDASEISAKUSYO

  Space-saving piping. Handle position and direction of opening and closing can be freely adjusted depending on your piping needs.

  CAD ：

  2D

  Standard Price:	SGD 22.19
  Days to Ship:	7 Day(s) or more

• 

  Free Ball, M11 Type, Ring Joint x Ring Joint

  ONDASEISAKUSYO

  [Features]
  ・ The standard handle (green) is compact and convenient for opening and closing in tight spaces. It can be closed by turning the handle clockwise when shipped.
  ・ By integrating space saving ball valve and fitting, the piping space can be reduced to 1/2 of the conventional type.
  ・ Handle position and opening/closing direction can be freely changed depending on piping
  [Applications]
  ・ Pneumatic equipment such as compressors
  ・ Machine tools and equipment
  ・ Copper pipe distribution equipment
  ・ Small pump accessory
  ・ Ships, agricultural equipment
  ・ Instrumentation equipment
  ・ Other industrial machine and equipment

  CAD ：

  2D

  Standard Price:	SGD 25.89
  Days to Ship:	7 Day(s) or more

• 

  Free Ball (Angled), ML1 Type, Rc Thread × Rc Thread

  ONDASEISAKUSYO

  Space-saving piping. Handle position and direction of opening and closing can be freely adjusted depending on your piping needs.

  CAD ：

  2D

  Standard Price:	SGD 21.50
  Days to Ship:	4 Day(s) or more

• 

  Free Ball (Angle), ML2 Type, R Screw × Rc Screw

  ONDASEISAKUSYO

  [Features]
  ・ The standard handle (green) is compact and convenient for opening and closing in tight spaces. It can be closed by turning the handle clockwise when shipped.
  ・ By integrating space saving ball valve and fitting, the piping space can be reduced to 1/2 of the conventional type.
  ・ Handle position and opening/closing direction can be freely changed depending on piping
  [Applications]
  ・ Pneumatic equipment such as compressors
  ・ Machine tools and equipment
  ・ Copper pipe distribution equipment
  ・ Small pump accessory
  ・ Ships, agricultural equipment
  ・ Instrumentation equipment
  ・ Other industrial machine and equipment

  CAD ：

  2D

  Standard Price:	SGD 17.73-
  Days to Ship:	4 Day(s) or more

• 

  Free Ball (Angle) ML6 Type, R Screw × Hose Joint

  ONDASEISAKUSYO

  Space-saving piping. Handle position and direction of opening and closing can be freely adjusted depending on your piping needs.

  CAD ：

  2D

  Standard Price:	SGD 24.36-
  Days to Ship:	7 Day(s) or more

• 

  Free Ball (Angle) ML7 Type R Screw × Air Plug

  ONDASEISAKUSYO

  Space-saving piping. Handle position and direction of opening and closing can be freely adjusted depending on your piping needs.

  CAD ：

  2D

  Standard Price:	SGD 26.29
  Days to Ship:	4 Day(s) or more

• 

  E-Bowl,ME1, Rc Screw x Rc Screw

  ONDASEISAKUSYO

  Small ball valve with a simple design and reasonable price. The single-touch detachable handle allows easy installation.
  
  [Features]
  · Reasonable because the distance between faces is shorter and the number of parts are smaller than those of free ball and miniature ball valves.
  · Does not hinder installation with single-touch removal type handle.

  CAD ：

  2D

  Standard Price:	SGD 15.36-
  Days to Ship:	7 Day(s) or more

• 

  E-Ball, ME2 Type, Rc Screw × R Screw

  ONDASEISAKUSYO

  Small ball valve with a simple design and reasonable price. The single-touch detachable handle allows easy installation.

  CAD ：

  2D

  Standard Price:	SGD 14.63-
  Days to Ship:	4 Day(s) or more

• 

  MR Type (Miniature) Ball Valve, MR2 Type, Rc Screw × R Screw

  ONDASEISAKUSYO

  Ball valve MR type (miniature) ball valve MR2 type tapered female thread × tapered male thread made by ONDA MFG.

  CAD ：

  2D

  Standard Price:	SGD 16.39
  Days to Ship:	7 Day(s) or more

• 

  MR Type (Miniature) Ball Valve MR3 Rc Screw × Rc Screw

  ONDASEISAKUSYO

  Applicable fluids: Suitable for piping cold water / antifreeze / oil / air.

  CAD ：

  2D

  Days to Ship:	7 Day(s) or more

Loading...