ONDASEISAKUSYO Ball Valves（Handle Shape：T-Shaped Handle）

• 

  T-Shaped (Three-Way) Ball Valve with T Handle

  ONDASEISAKUSYO

  Applicable fluids: Suitable for piping hot and cold water / antifreeze / oil.

  CAD ：

  2D

  Standard Price:	SGD 35.03-
  Days to Ship:	4 Day(s) or more

• 

  Double Lock Valve, CBWL7 Type, Check Valve, Ball Valve, Angled Type

  ONDASEISAKUSYO

  Has an integrated double lock joint allowing single-touch connection of resin piping. Handle length is adjustable, so a single unit can be used as a standard handle or long handle.

  CAD ：

  2D

  Standard Price:	SGD 42.96-
  Days to Ship:	7 Day(s) or more

• 

  Ball Valve, FF (Full-bore), Green T Handle

  ONDASEISAKUSYO

  The full bore design matches the nominal diameter of the pipe and is optimal for use in large-flow piping.
  
  [Features]
  · A newly launched compact full bore ball valve with a shorter face‐to‐face, distance.
  · Features improved pressure resistance.
  · Compact design
  · Compared with FF Type (full-bore), face to face distance is shortened, so space-saving piping is possible at a reasonable price.
  · Increased pressure resistance performance.
  · Thick design; the maximum allowable pressure is 4.2 MPa (600 psi).
  · Made in Japan.
  · The main components (main body, ball, cap, etc.) of our brass ball valves, valves, and BS (bronze) ball valves are manufactured in Japan.

  CAD ：

  2D

  Standard Price:	SGD 27.50-
  Days to Ship:	7 Day(s) or more

• 

  Double Lock Valve, CBW7, Ball Valve with Check Valve, Straight

  ONDASEISAKUSYO

  It is a ball valve made in Japan that can be connected to the pipe with single-action, and it has excellent workability.
  [Features]
  ・ It is integrated double-lock joint that can connect resin conduit with single-action
  ・ It has a single-action attachment/release and length adjustable handle, so 1 unit can be used as short and long handle.
  ・ Ball valve with backflow prevention function with single-action connection of cross-linked polyethylene pipe / polybutene pipe on the inlet side of running water
  ・ An outer diameter seal allows for a wide flow path and large flow rate.
  ・ Single-action connection to the pipe for excellent workability
  [Applications]
  ・ It is ideal for areas where backflow prevention is required, such as the inlet side of a water heater

  CAD ：

  2D

  Standard Price:	SGD 39.23-
  Days to Ship:	7 Day(s) or more

• 

  Ball Valve, FS, Green T Handle

  ONDASEISAKUSYO

  Applicable fluids: It is suitable for cold water, hot water, antifreeze, oil, air piping.

  CAD ：

  2D

  Standard Price:	SGD 22.92-
  Days to Ship:	7 Day(s) or more

• 

  FF2 Type (Full-Bore) Ball Valve, Full-Bore Compact, Green T Handle

  ONDASEISAKUSYO

  The pressure resistance is also improved.
  [Features]
  ・ Compared to the FF type (full ball), the face-to-face dimension is shorter, space saving piping is possible, and it is a good value.
  ・ Maximum allowable working pressure is 4.2 MPa (600 psi) with thick wall design

  CAD ：

  2D

  Standard Price:	SGD 26.82-
  Days to Ship:	7 Day(s) or more

• 

  Ball Valves, Full-Bore, Oversized Ball Type, Green T-Handle, FF Type

  ONDASEISAKUSYO

  Full-bore designed to the same nominal diameter as the pipe. Optimal for use in large flow-rate pipelines.

  CAD ：

  2D

  Standard Price:	SGD 23.51-
  Days to Ship:	4 Day(s) or more

• 

  FF Type (Full-Bore) Ball Valve, Full Bore, Orange T Handle

  ONDASEISAKUSYO

  The full bore design matches the nominal diameter of the pipe and is optimal for use in large-flow piping.

  CAD ：

  2D

  Standard Price:	SGD 23.51-
  Days to Ship:	7 Day(s) or more

• 

  FF-Type (Full Bore) Ball Valve T Handle for Firefighting Facilities

  ONDASEISAKUSYO

  [Features]
  - Certified equipment for firefighting and accident prevention.
  - Full bore design matches the nominal diameter of the pipe; optimal for use in large-flow piping.

  CAD ：

  2D

  Standard Price:	SGD 38.91-
  Days to Ship:	7 Day(s) or more

• 

  F2 Type (Standard Bore) Ball Valve, Compact Ball, T Handle

  ONDASEISAKUSYO

  Applicable fluids: Suitable for piping hot and cold water / antifreeze / oil / air.
  
  [Features]
  • Compact design delivering flow rate comparable to regular ball is perfect for installation in a tight space.

  CAD ：

  2D

  Standard Price:	SGD 27.36-
  Days to Ship:	7 Day(s) or more

• 

  F Type (Standard Bore) Ball Valve, Regular Ball, T Handle

  ONDASEISAKUSYO

  Ball valve F type (standard bore) ball valve, regular ball, T handle made by ONDA MFG.

  CAD ：

  2D

  Standard Price:	SGD 35.78-
  Days to Ship:	7 Day(s) or more

• 

  FS Type (Reduced Bore)Ball Valve, T Handle

  ONDASEISAKUSYO

  Ball valve FS type (reduced bore) ball valve, T handle made by ONDA MFG.

  CAD ：

  2D

  Standard Price:	SGD 16.58-
  Days to Ship:	7 Day(s) or more

• 

  B3 Type (Bronze) Ball Valve, T Handle

  ONDASEISAKUSYO

  Product conforming to the public building construction standard specifications documents issued by the Ministry of Land, Infrastructure, Transport and Tourism of Japan.

  CAD ：

  2D

  Standard Price:	SGD 68.24-
  Days to Ship:	7 Day(s) or more

• 

  CB1 Type, Ball Valve with Check Valve, R Screw × G Screw

  ONDASEISAKUSYO

  Space-saving due to integrated design with internal check valve. Easy to install piping, even to thin water heaters. Moreover, construction is easy because you can perform piping and heat-retention work with the handle removed. The IN side screw (on the main body side) of this product can be connected to flexible piping.

  CAD ：

  2D

  Standard Price:	SGD 28.55-
  Days to Ship:	7 Day(s) or more

• 

  CB2 Type, Ball Valve with Check Valve, Rc Screw × G Screw

  ONDASEISAKUSYO

  Space-saving due to integrated design with built-in check valve. Easy to install piping, even to thin water heaters. Moreover, construction is easy because piping and heat-retention work can be carried out with the handle removed.

  CAD ：

  2D

  Days to Ship:	7 Day(s) or more

• 

  CB3 Type, Ball Valve with Check Valve, Rc Screw × Rc Screw

  ONDASEISAKUSYO

  Space-saving due to integrated design with internal check valve. Easy to install piping, even to thin water heaters. Further, construction is easy because you can perform piping and heat-retention work with the handle removed.

  CAD ：

  2D

  Standard Price:	SGD 25.92-
  Days to Ship:	7 Day(s) or more

• 

  Ball Valve with Check Valve, R / R Thread, CB4 Type

  ONDASEISAKUSYO

  This product is integrated with a built-in check valve to save space. The IN-side thread (on the main body side) is connectable to flexible piping.
  
  [Features]
  · The built-in check valve design requires only ≤ 1/3 of normal plumbing space in comparison to separately installed check valves and other valves.
  · Easy to install piping, even to thin water heaters. The handle can also be removed for easy installation of pipes and heat insulation.
  · Can be connected directly with flexible pipe couplings.
  · The handle length is adjustable. Therefore, a single handle can be used adjusted to standard or long length.
  · Single-touch detachable for easy uninstallation.
  · By comparing the flow-rates of dedicated in-built check valves with a nominal diameter of 3/4" (20 mm) with check valves of nominal diameter 1/2" (13 mm), the flow-rate of the built-in check valves is 40% higher (manufacturer's comparison).

  CAD ：

  2D

  Standard Price:	SGD 25.92-
  Days to Ship:	7 Day(s) or more

• 

  CB5 Type, Ball Valve with Check Valve, Rc Screw × Rc Screw

  ONDASEISAKUSYO

  Space-saving due to integrated design with internal check valve. Easy to install piping, even to thin water heaters. What is more, construction is easy because you can perform piping and heat-retention work with the handle removed.

  CAD ：

  2D

  Standard Price:	SGD 30.63-
  Days to Ship:	7 Day(s) or more

• 

  CB7 Type, Ball Valve with Check Valve, R Screw x Adapter with Nut

  ONDASEISAKUSYO

  Space-saving due to integrated design with built-in check valve. Easy to install piping, even to thin water heaters. Moreover, construction is easy because piping and insulation work can be carried out with the handle removed. The IN side screw (main body side) of this product can be connected to flexible piping.

  CAD ：

  2D

  Standard Price:	SGD 29.87-
  Days to Ship:	7 Day(s) or more

• 

  CB8 Type, Ball Valve with Check Valve, Adapter with Rc Screw × Nut

  ONDASEISAKUSYO

  Non asbestos seal is included. It is space saving because of integrated built-in check valve. It uses a check valve with a large flow rate. Handle length is adjustable, so it will not get in the way of installation.
  [Features]
  ・ Since it is an integrated type with a built-in check valve, the piping space is compact compared to mounting the check valve and valve separately.
  ・ Easy piping work to a low profile water heater
  ・ Moreover, it enables piping and thermal insulation work with handle removed, making installation easy
  ・ Direct connection with flexible pipe fitting is possible
  ・ The nominal diameter 3/4 (20) has a built-in check valve dedicated for 3/4, and the flow rate is 40% larger than when using the same check valve as the nominal diameter 1/2 (13).
  ・ Since it has a length adjustable handle, 1 unit can used as short and long handle.
  ・ It is a single-action attachment/release type that does not interfere with the construction if removed.

  CAD ：

  2D

  Standard Price:	SGD 29.87-
  Days to Ship:	7 Day(s) or more

• 

  CB20 Type, Ball Valve with Check Valve, G Screw x Adapter with Nut

  ONDASEISAKUSYO

  Space-saving due to integrated design with built-in check valve. Easy to install piping, even to thin water heaters. Moreover, construction is easy because piping and insulation work can be carried out with the handle removed.

  CAD ：

  2D

  Standard Price:	SGD 29.87-
  Days to Ship:	7 Day(s) or more

• 

  CBL2 Type, Ball Valve with Check Valve, Rc Screw × G Screw, Angle Type

  ONDASEISAKUSYO

  It is space-saving for internal check valve integral. Uses a check valve with a large flow rate. Handle length is adjustable, so it won't get in the way of construction.

  CAD ：

  2D

  Standard Price:	SGD 29.15-
  Days to Ship:	7 Day(s) or more

• 

  CBL14 Type, Ball Valve with Check Valve, Adapter with Nut x G Screw Angle Type

  ONDASEISAKUSYO

  Non asbestos packing is included. Space saving thanks to integral check valve. Uses a check valve with a large flow rate. Handle length is adjustable, so it won't get in the way of construction.

  CAD ：

  2D

  Standard Price:	SGD 32.32-
  Days to Ship:	7 Day(s) or more

• 

  CBL20, Ball Valve with Check Valve, G Screw × Adapter with Nut, Angled

  ONDASEISAKUSYO

  Asbestos-free packing is included. It is space-saving for internal check valve integral. Uses a check valve with a large flow rate. Handle length is adjustable, so it won't potentially impede construction.

  CAD ：

  2D

  Standard Price:	SGD 32.32-
  Days to Ship:	7 Day(s) or more

• 

  CB26 Type, Ball Valve with Check Valve, HIVP x Adapter with Nut

  ONDASEISAKUSYO

  HIVP (impact resistant rigid PVC pipe) can be directly inserted into the ball valve with check valve.

  CAD ：

  2D

  Standard Price:	SGD 35.64-
  Days to Ship:	7 Day(s) or more

• 

  CB27 Check Valve and Ball Valve HIVP x G Screw

  ONDASEISAKUSYO

  [Features]
  ・ HIVP (impact resistant rigid PVC pipe) can be directly inserted into the ball valve with check valve

  CAD ：

  2D

  Standard Price:	SGD 32.73-
  Days to Ship:	7 Day(s) or more

• 

  CBL26 Type, Ball Valve with Check Valve, HIVP x Adapter with Nut Angle Type

  ONDASEISAKUSYO

  HIVP (impact-resistant hard PVC pipe) can be inserted directly. Non asbestos packing is included. Space-saving integrated check valve. Uses a check valve with a large flow rate. Handle length is adjustable, so it does not get in the way of construction.

  CAD ：

  2D

  Standard Price:	SGD 37.70-
  Days to Ship:	7 Day(s) or more

• 

  CBL27 Type, Ball Valve with Check Valve, HIVP x G Screw, Angled Type

  ONDASEISAKUSYO

  HIVP (impact-resistant hard PVC pipe) can be inserted directly. Space-saving thanks to integration of internal check valve. Uses a check valve with a high flow rate. Handle length is adjustable, so it will not get in the way of installation.
  
  [Features]
  · Check valve built-in design requires only 1/3 or less of conventional piping space, compared to when check valves and other valves are installed separately.
  · Easy to install piping, even to thin water heaters.
  · The handle can also be removed for easy installation of pipes and heat insulation.
  · Can be connected directly with a flexible coupling.
  · A dedicated check valve for a nominal diameter of 3/4 (20) is included, and the handle length is adjustable when compared to the same check valve used for a nominal diameter of 1/2 (13), so one unit can be used with a standard handle and long neck handle.
  · Features single-touch removal so that when it is removed installation is

  CAD ：

  2D

  Standard Price:	SGD 36.60-
  Days to Ship:	7 Day(s) or more

Loading...