(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
- Please be informed of our operating hours during the Chinese New Year Holidays. Click here for details.
OSG Screw-Hole-Related Tools（Screw size (Nominal)：M4）
Search by specifying the lower class category
Hand Taps
Spiral Taps
Point Taps
Roll Taps
Taps for Pipes
Thread Cutters
Thread-Cutting-Related Tools
Dies
Modification/Removal Tools
| Days to Ship |
|
|---|
-
Spiral Tap for General Application_EX-SFT
OSG
Used for drilling blind holes. For carbon steel, steel alloy, and nonferrous metal, this is suitable for cutting materials where the metal waste forms a continuous coil.
Standard Price: SGD 13.40- Days to Ship: 4 Day(s) or more -
Model A Tap Series, Spiral Tap A-SFT
OSG
Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. A spiral tap with a spiral groove mainly used for blind holes.
Standard Price: SGD 25.63- Days to Ship: 4 Day(s) or more -
Pointed Tap Series, General Purpose EX-POT
OSG
For general use, ideal with carbon steel, alloy steel, and non-ferrous metals for cutting materials where the metal waste forms a continuous coil. Chips are reliably pushed forward so that they don't get in the way
Standard Price: SGD 12.58- Days to Ship: 4 Day(s) or more -
Tungsten Carbide Straight Flutes Tap for Hardened Steels (50 HRC〜)_VX-OT
OSG
Ideal for tapping hardened steel (alloy steel, die steel, tool steel, etc.) of 50 HRC or higher
Standard Price: SGD 175.58 Days to Ship: 4 Day(s) or more -
Fluteless (Nu-Roll) Tap TiN coated_TIN-NRT
OSG
Steel and non-ferrous alloys are equally suitable. Capable of high-speed cutting, features greatly improved durability, and provides high-efficiency tapping.
Standard Price: SGD 28.58 Days to Ship: 4 Day(s) or more -
Tungsten Carbide Straight Flutes Tap for Hardened Steels (〜 55 HRC)_WH55-OT
OSG
Suitable for tapping hardening steel up to 55 HRC.
Work material: High hardness steel to 55 HRC
For coating / surface treatment / steel
Accuracy (class) OH3Standard Price: SGD 136.25 Days to Ship: 4 Day(s) or more -
Spiral Tap for Stainless Steels_EX-SUS-SFT
OSG
Suitable for blind holes for stainless steel, heat resistant steel, nickel chromium manganese steel, etc. Well suited for materials such as carbon steel, alloy steel, etc.
Standard Price: SGD 13.97- Days to Ship: 2 Day(s) or more -
Pointed Tap Series TiN Coating TIN-POT
OSG
Features a wide range of uses, but especially suitable for high-speed tapping of stainless steel, tempered material, etc.
Standard Price: SGD 24.93 Days to Ship: 4 Day(s) or more -
Model A Tap Series, Pointed Tap A-POT
OSG
Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. Point tap with point grooves used for through holes.
Standard Price: SGD 25.45- Days to Ship: 4 Day(s) or more -
Pointed Tap for Stainless Steel use EX-SUS-POT
OSG
Offers superb sharpness and durability. Can be used to drill holes in difficult-to-cut stainless steel.
Standard Price: SGD 14.07- Days to Ship: 2 Day(s) or more -
CPM Fluteless (Nu-Roll) Tap V coated_VP-NRT
OSG
As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials
Standard Price: SGD 30.08- Days to Ship: 4 Day(s) or more -
Threading Round Die Series Pipe General Threading Round Die RD-H
OSG
[Specifications]
· Shape: Die
· Coating: Non-Coated
· Tool material: HSSStandard Price: SGD 115.17- Days to Ship: 3 Day(s) -
Spiral Tap General Purpose, Long Shank EX-LT-SFT
OSG
For standard spiral taps, it is used when the protruding length of the screw is insufficient.
Standard Price: SGD 27.89- Days to Ship: 4 Day(s) or more -
Spiral Tap TiN Coating TIN-SFT
OSG
Machined with a tapped thread length of 2D or less, it is well suited for tapping low and medium carbon steel and stainless steel using a water-soluble cutting agent.
Standard Price: SGD 25.63 Days to Ship: 8 Day(s) or more -
OSG
The work material is ideal for blind hole drilling of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 35 HRC
Standard Price: SGD 16.78 Days to Ship: 4 Day(s) or more -
Spiral Tap with Long Shank_A-LT-SFT
OSG
Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. A spiral tap with a spiral groove mainly used for blind holes.
Standard Price: SGD 43.41- Days to Ship: 4 Day(s) or more -
Pointed Tap for General Application (with OX)_EX-H-POT
OSG
For standard point taps, it is used when the protruding length of the screw is insufficient.
Standard Price: SGD 14.49 Days to Ship: 4 Day(s) or more -
Spiral Tap for Stainless Steel (Water Soluble Cutting Oil-Compatible) CC-SUS-SFT
OSG
Achieves female threading of stainless steel with a water-soluble cutting fluid.
Tool Material: Vanadium high-speed steel
Hole type: For blind holes
Work material: General steel / stainless steelStandard Price: SGD 35.70 Days to Ship: 4 Day(s) or more -
Spiral Tap TiN coated with Long Shank_TIN-LT-SFT
OSG
Machined with a tapped thread length of 2D or less, it is well suited for tapping low and medium carbon steel and stainless steel using a water-soluble cutting agent.
Standard Price: SGD 44.67 Days to Ship: 13 Day(s) or more -
Spiral Tap for Stainless Steels with Long Shank_EX-LT-SUS-SFT
OSG
Suitable for blind holes for stainless steel, heat resistant steel, nickel chromium manganese steel, etc. Well suited for materials such as carbon steel, alloy steel, etc.
Standard Price: SGD 31.02- Days to Ship: 4 Day(s) or more -
Tungsten Carbide Straight Flutes Tap_OTT
OSG
Ideal for tapping large amounts of ordinary cast iron, high-rigidity cast iron, thermosetting resin, brass cast iron, etc., using a high-precision automatic machine.
Standard Price: SGD 100.87 Days to Ship: 4 Day(s) or more -
Tungsten Carbide Straight Flutes Tap with Long Shank_LT-OTT
OSG
Ideal for tapping large amounts of ordinary cast iron, high-rigidity cast iron, thermosetting resin, brass cast iron, etc., using a high-precision automatic machine.
Standard Price: SGD 182.12 Days to Ship: 4 Day(s) or more -
Pointed Tap for Stainless Steels with Long Shank_EX-LT-SUS-POT
OSG
With excellent sharpness and durability, it is used for stainless steel through holes where poor machinability is a problem.
Standard Price: SGD 30.18- Days to Ship: 4 Day(s) or more -
Long Shank・General Application_EX-LT-POT
OSG
For standard point taps, it is used when the protruding length of the screw is insufficient.
Standard Price: SGD 27.39- Days to Ship: 4 Day(s) or more -
OSG
Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision through-hole tapping.
Standard Price: SGD 44.53 Days to Ship: 4 Day(s) or more -
Pointed Tap for Difficult-To-Cut Materials CPM-POT
OSG
The work material is ideal for through hole drilling of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC
Standard Price: SGD 16.01 Days to Ship: 4 Day(s) or more -
CPM Fluteless (Nu-Roll) Tap V coated Short Chamfer Type_VP-SC-NRT
OSG
As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials
Standard Price: SGD 33.37 Days to Ship: 4 Day(s) or more -
Fluteless Tap (X Performer)_S-XPF
OSG
There are no chipping problems compared to cutting taps for carbon steel and alloy steel, enabling long life machining. Especially useful for processing automotive forged steel parts.
* M2.6 or below can be changed to powder HSS (CPM) at any time. We ask for your understanding in advance.Standard Price: SGD 31.27 Days to Ship: 4 Day(s) or more -
Fluteless Tap for Copper_CU-NRT
OSG
CrN coating with superior wear resistance and anti-weldability for copper has been applied, with HSSE material used to achieve a long machining life for copper.
Standard Price: SGD 31.27 Days to Ship: 4 Day(s) or more -
Fluteless (Hi-Roll) Tap for Non-Ferrous Metals_B-HRT
OSG
Suitable for metals such as aluminum, magnesium, zinc, and copper and non-ferrous alloys of these materials.
Standard Price: SGD 20.81 Days to Ship: 4 Day(s) or more -
General Application(with OX)_EX-LT-H-POT
OSG
[Specifications]
· Shape: Point tap
· Screw type: metric
· Work Material: Low Carbon Steel (less than 0.25% carbon alloy) [◎] / Medium Carbon Steel (0.25 to 0.45% carbon alloy) [○] / High Carbon Steel (over 0.45% carbon alloy) [○] / Alloy Steel (SCM) [○] / Cast Steel (SC) [○] / Thermoplastic Plastic (Vinyl Chloride, Nylon, etc.) [○]Standard Price: SGD 30.18 Days to Ship: 4 Day(s) or more -
Spiral Pointed Tap with Long Shank_A-LT-POT
OSG
Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. Point tap with point grooves used for through holes.
Standard Price: SGD 41.80- Days to Ship: 4 Day(s) or more -
HR Coated Spiral Tap for Nickel Alloy_WHR-NI-SFT
OSG
A highly rigid cutting edge is realized by combining spiral taps with point grooves. Enables stable processing with a long service life for nickel base alloy (40 to 45 HRC) after aging treatment
Standard Price: SGD 45.94 Days to Ship: 4 Day(s) or more -
CPM Spiral Tap V Coated_VP-SFT
OSG
Optimal for processing steel alloy pre-hardened steel of 35 to 42 HRC.
Tool Material: Powder metal high-speed steel
Thread type: Metric
Hole type: For blind holes
Work material: General steel / heat-treated steel
Coating: Surface treatment for steelStandard Price: SGD 27.55 Days to Ship: 4 Day(s) or more -
Spiral SYNCHRO Tap with Long Shank_HS-LT-SFT
OSG
Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision blind-hole tapping.
Standard Price: SGD 52.42 Days to Ship: 4 Day(s) or more -
Tungsten Carbide Spiral Tap_OT-SFT
OSG
Ideal for tapping a large number of blind holes with high precision automatic machines, etc. in aluminum alloys, magnesium alloys, copper alloys, thermoplastic, etc.
Standard Price: SGD 118.93 Days to Ship: 4 Day(s) or more -
Tungsten Carbide Straight Flutes Tap for Die Castings_OT-DC-HT
OSG
Ideal for tapping aluminum alloy castings, etc. in large quantities with high precision automatic machines, etc.
Standard Price: SGD 111.38 Days to Ship: 4 Day(s) or more -
Pointed Tap TiN coated with Long Shank_TIN-LT-POT
OSG
Features a wide range of uses, but especially suitable for high-speed tapping of stainless steel, tempered material, etc.
Standard Price: SGD 43.91 Days to Ship: 4 Day(s) or more -
Pointed Tap V coated with Long Shank_V-LT-POT
OSG
Can be used with a wide range of soft and hard materials. Exhibits superb performance when used for high-speed / high-dilution (water-soluble cutting fluid) tapping conditions. Also effective for dry tapping
Standard Price: SGD 43.91 Days to Ship: 4 Day(s) or more -
LH Spiral SYNCHRO Tap for Aluminum_HS-AL-RFT
OSG
Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision female threading of aluminum and aluminum alloy.
Standard Price: SGD 20.31 Days to Ship: 4 Day(s) or more -
LH Spiral SYNCHRO Tap with JIS Shank_J-HS-RFT
OSG
Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision through-hole tapping.
Standard Price: SGD 36.24 Days to Ship: 4 Day(s) or more -
LH Spiral SYNCHRO Tap with Long Shank_HS-LT-RFT
OSG
Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision through-hole tapping.
Standard Price: SGD 52.42- Days to Ship: 4 Day(s) or more -
Fluteless (Nu-Roll) Tap TiN coated with Long Shank_TIN-LT-NRT
OSG
Steel and non-ferrous alloys are equally suitable. Capable of high-speed cutting, features greatly improved durability, and provides high-efficiency tapping.
Standard Price: SGD 39.69- Days to Ship: 4 Day(s) or more -
CPM Fluteless (Nu-Roll) Tap V Coated with Long Shank_VP-LT-NRT
OSG
As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials
Standard Price: SGD 39.69- Days to Ship: 4 Day(s) or more -
Grooveless Tap Series High-Speed Synchro Tap for Aluminum HS-AL-NRT
OSG
Highly accurate female thread machining is performed without producing chips, due to plastic distortion of aluminum and aluminum alloys.
Standard Price: SGD 22.92 Days to Ship: 4 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Screw size (Nominal) |
| Screw Types |
| work material |
| Pitch (P), Number of Threading(mm) |
| Tool Material Type |
| Tap Type |
| Hole type |
| Chamfer threads (Lcf) |
| Coating Type |
| Coating Y/N |
| Overall Length (L)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG |
| Product Series | Tungsten Carbide Straight Flutes Tap for Hardened Steels (50 HRC〜)_VX-OT | Tungsten Carbide Straight Flutes Tap for Hardened Steels (〜 55 HRC)_WH55-OT | Threading Round Die Series Pipe General Threading Round Die RD-H | Spiral Tap for Stainless Steel (Water Soluble Cutting Oil-Compatible) CC-SUS-SFT | Spiral Tap for Stainless Steels with Long Shank_EX-LT-SUS-SFT | Pointed Tap for Stainless Steels with Long Shank_EX-LT-SUS-POT | CPM Fluteless (Nu-Roll) Tap V coated Short Chamfer Type_VP-SC-NRT | Tungsten Carbide Straight Flutes Tap for Die Castings_OT-DC-HT | Fluteless (Nu-Roll) Tap TiN coated with Long Shank_TIN-LT-NRT | CPM Fluteless (Nu-Roll) Tap V Coated with Long Shank_VP-LT-NRT | Grooveless Tap Series High-Speed Synchro Tap for Aluminum HS-AL-NRT | ||||||||||||||||||||||||||||||||||
| Days to Ship | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 2 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 2 Day(s) or more | 4 Day(s) or more | 3 Day(s) | 4 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 13 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more |
| Screw size (Nominal) | M4 | M4 | M4 | M4 | M4 | M4 | M4 | M4 | M4 | M4 | M4 | M4 | M4 | M4 | M4 | M4 | M4 | M4 | M4 | M4 | M4 | M4 | M4 | M4 | M4 | M4 | M4 | M4 | M4 | M4 | M4 | M4 | M4 | M4 | M4 | M4 | M4 | M4 | M4 | M4 | M4 | M4 | M4 | M4 | M4 |
| Screw Types | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter |
| work material | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | High Hardness Steel (50-60 HRC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Quenched and tempered steel (45 to 55 HRC)[◎] | Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] | Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | - | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Stainless steel (SUS)[○] / Copper (Cu)[◎] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] | Nickel-based alloy (Inconel, etc.)[◎] | High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Cast Iron (FC)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Copper (Cu)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] |
| Pitch (P), Number of Threading(mm) | 0.5 ～ 0.75 | 0.5 ～ 0.7 | 0.5 ～ 0.75 | 0.7 | 0.7 | 0.7 | 0.7 ～ 0.75 | 0.7 | 0.5 ～ 0.7 | 0.7 ～ 0.75 | 0.7 | 0.5 ～ 0.7 | 0.7 | 0.7 | 0.7 | 0.5 ～ 0.7 | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 | 0.5 ～ 0.7 | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 |
| Tool Material Type | Vanadium High-Speed Steel | Powder high-speed steel | Vanadium High-Speed Steel | Carbide | Vanadium High-Speed Steel | Carbide | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Powder high-speed steel | Vanadium High-Speed Steel | Powder high-speed steel | High-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Powder high-speed steel | Powder high-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Carbide | Carbide | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Vanadium High-Speed Steel | High-speed steel | Vanadium High-Speed Steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Vanadium High-Speed Steel | Carbide | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Powder high-speed steel | Vanadium High-Speed Steel |
| Tap Type | Spiral Tap | Spiral Tap | Point tap | Hand Tap | Roll tap | Hand Tap | Spiral Tap | Point tap | Point tap | Point tap | Roll tap | Die | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Point tap | Spiral Tap | Spiral Tap | Spiral Tap | Hand Tap | Hand Tap | Point tap | Point tap | Point tap | Point tap | Roll tap | Roll tap | Roll tap | Roll tap | Point tap | Point tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Hand Tap | Point tap | Point tap | Point tap | Point tap | Point tap | Roll tap | Roll tap | Roll tap |
| Hole type | For blind hole | For blind hole | For through hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For blind hole | For through hole | For through hole | For through hole | For blind hole | - | For blind hole | For blind hole | For blind hole | For blind hole | For through hole | For blind hole | For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole | For through hole | For through hole | For through hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For through hole | For through hole | For through hole | For blind hole | For blind hole | For blind hole | For through hole / For blind hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole |
| Chamfer threads (Lcf) | 2.5P | 1.5P ～ 2.5P | 5P | 3P | 2P ～ 4P | 2.5P ～ 5P | 2.5P | 5P | 5P | 4P | 2P ～ 4P | - | 2.5P | 2.5P | 3P | 2.5P | 5P | 2.5P | 2.5P | 2.5P | 1.5P ～ 3P | 1.5P ～ 3P | 4P | 5P | 6P | 5P | 1P | 2P ～ 4P | 2P | 2.5P | 5P | 5P | 2.5P | 2.5P | 3P | 1.5P ～ 2.5P | 1.5P | 5P | 5P | 6P | 5P | 6P | 2P ～ 4P | 2P ～ 4P | 2P |
| Coating Type | Non-Coated | Other | Non-Coated | TiCN | TiN | TiCN | Non-Coated | TiN | Other | Non-Coated | TiCN | Non-Coated | Non-Coated | TiN | Non-Coated | Other | Non-Coated | TiN | TiN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiN | Non-Coated | TiCN | TiCN | CrN | Non-Coated | Non-Coated | Other | Other | TiCN | TiN | Non-Coated | Non-Coated | TiN | TiCN | Non-Coated | TiN | TiN | TiN | TiCN | Non-Coated |
| Coating Y/N | NA | Available | NA | Available | Available | Available | NA | Available | Available | NA | Available | NA | NA | Available | NA | Available | NA | Available | Available | NA | NA | NA | NA | NA | Available | NA | Available | Available | Available | NA | NA | Available | Available | Available | Available | NA | NA | Available | Available | NA | Available | Available | Available | Available | NA |
| Overall Length (L)(mm) | 52 | 52 ～ 100 | 52 | 52 | 52 | 52 | 52 | 52 | 52 | 52 | 52 | - | 100 ～ 150 | 52 | 52 | 100 ～ 150 | 52 | 52 | 100 | 100 ～ 150 | 52 | 100 | 100 ～ 150 | 100 ～ 150 | 52 | 52 | 52 | 52 | 52 | 52 | 100 | 100 ～ 150 | 52 | 52 | 100 | 52 | 52 | 100 | 100 | 52 | 52 | 100 ～ 150 | 80 ～ 120 | 80 ～ 120 | 52 |
Loading...
Configure
Specification/Dimensions
-
Screw size (Nominal)
- CTG-54
- CTG-42
- CTG-36
- CTG-28
- CTG-22
- CTG-16
- No.0
- No.0UN
- NO.0-80UNF
- No.10
- No.1
- No.1UN
- No.10UN
- No.10UNF
- S0.1
- NO.1-72UNF
- NO.1-64UNC
- NO.10-32UNF
- No.10-32UNF
- NO.10-24UNC
- No.10-24UNC
- No.12
- No.12UN
- NO.12-28UNF
- No.12-28UNF
- NO.12-24UNC
- No.12-24UNC
- No.2
- No.2UN
- S0.2
- NO.2-64UNF
- No.2-64UNF
- NO.2-56UNC
- No.2-56UNC
- No.3
- No.3UN
- S0.3
- NO.3-56UNF
- No.3-56UNF
- NO.3-48UNC
- No.3-48UNC
- No.4
- No.4UN
- S0.4
- NO.4-48UNF
- No.4-48UNF
- NO.4-40UNC
- No.4-40UNC
- No.5
- No.5UN
- S0.5
- NO.5-44UNF
- No.5-44UNF
- NO.5-40UNC
- No.5-40UNC
- 0.6
- No.6
- No.6UN
- S0.6
- NO.6-40UNF
- No.6-32UNC
- 0.7
- S0.7
- 0.8
- No.8
- No.8UN
- S0.8
- NO.8-36UNF
- No.8-36UNF
- NO.8-32UNC
- No.8-32UNC
- 0.9
- S0.9
- 1
- 1UN
- 1UNS
- G1
- M1
- NPS1
- NPT1
- NPTF1
- PF1
- PF 1
- PS 1
- PT 1
- R1
- Rp1
- S1
- UNC1
- UNF1
- W1
- 1'-11.5
- 1'-11
- 1-8UNC
- 1 1/2
- 1"1/2UN
- G1"1/2
- NPS1"1/2
- NPT1"1/2
- PS 1 1/2
- PT 1 1/2
- R1"1/2
- Rp1"1/2
- W1"1/2
- 1'1/2-11.5
- 1'1/2-11
- 1 1/2-8UN
- 1 1/4
- 1"1/4UN
- G1"1/4
- NPS1"1/4
- NPT1"1/4
- PS 1 1/4
- PT 1 1/4
- R1"1/4
- Rp1"1/4
- W1"1/4
- 1'1/4-11.5
- 1'1/4-11
- 1 1/4-8UN
- 1 1/8
- 1"1/8UN
- G1"1/8
- R1"1/8
- W1"1/8
- 1'1/8-11
- 1 1/8-8UN
- 1"1/16UN
- 1/2
- 1/2PF
- 1/2UN
- 1/2W
- G1/2
- NPS1/2
- NPT1/2
- NPTF1/2
- PF 1/2
- PS 1/2
- PT 1/2
- R1/2
- Rc1/2
- Rp1/2
- UNC1/2
- UNF1/2
- W1/2
- 1/2-20UNF
- 1/2-14
- 1/2-13UNC
- 1/2W12
- 1 3/4
- 1"3/4UN
- G1"3/4
- R1"3/4
- Rp1"3/4
- W1"3/4
- 1'3/4-11
- 1 3/4-8UN
- 1 3/8
- 1"3/8UN
- G1"3/8
- R1"3/8
- W1"3/8
- 1 3/8-8UN
- 1/4
- 1/4UN
- 1/4UNF
- 1/4W
- G1/4
- NPS1/4
- NPT1/4
- NPTF1/4
- PF1/4
- PF 1/4
- PT 1/4
- R1/4
- Rc1/4
- Rp1/4
- SM1/4
- UNC1/4
- UNF1/4
- W1/4
- 1/4-28UNF
- 1/4-20UNC
- 1/4-19
- 1/4-18
- 1/4W20
- 1 5/8
- W1"5/8
- 1 5/8-8UN
- M1 to 6
- M1～6
- W1"7/8
- 1 7/8-8UN
- 1 7/16
- 1 8
- 1'W8
- 1/8
- 1/8PT
- G1/8
- NPS1/8
- NPT1/8
- NPTF1/8
- PF1/8
- PF 1/8
- PS 1/8
- PT 1/8
- R1/8
- Rc1/8
- Rp1/8
- SM1/8
- W1/8
- 1/8-28
- 1/8-27
- 1/8-18
- 1 9/16
- M1 to 10
- 1'11.5
- 1 12
- 1 14
- 1/16
- G1/16
- NPS1/16
- NPT1/16
- R1/16
- Rp1/16
- 1/16-28
- 1/16-27
- 1 20
- M1.1
- M1.2
- S1.2
- 1.25
- 1.29
- 1.37
- M1.4
- S1.4
- 1.45
- 1.5
- M1.6
- M1.7
- M1.8
- 2
- 2UN
- G2
- M2
- M2.0
- NPS2
- NPT2
- PT 2
- R2
- Rp2
- W2
- 2'-11.5
- 2'-11
- 2-8UN
- 2 1/2
- G2"1/2
- R2"1/2
- Rp2"1/2
- 2'1/2-11
- 2'1/2-8
- W2"1/4
- 2'1/4-11
- 2 4.5
- M2 to 4.5
- 2 12
- M2.2
- M2.3
- M2.5
- M2.6
- 3
- 3M
- G3
- M3
- M3.0
- R3
- Rp3
- STI M3
- 3'-11
- 3'-8
- 3 1/2
- G3"1/2
- R3"1/2
- Rp3"1/2
- 3'1/2-11
- 3/4
- 3/4UN
- G3/4
- NPS3/4
- NPT3/4
- NPTF3/4
- PF 3/4
- PS 3/4
- PT 3/4
- R3/4
- Rp3/4
- UNC3/4
- UNF3/4
- W3/4
- 3/4-16UNF
- 3/4-14
- 3/4-10UNC
- 3/4W10
- 3/8
- 3/8UN
- 3/8UNF
- 3/8W
- G3/8
- M3～8
- NPS3/8
- NPT3/8
- NPTF3/8
- PF3/8
- PF 3/8
- PT 3/8
- R3/8
- Rc3/8
- Rp3/8
- UNC3/8
- UNF3/8
- W3/8
- 3/8-24UNF
- 3/8-19
- 3/8-18
- 3/8-16UNC
- 3/8W16
- M3 to 10
- 3/16
- SM3/16
- W3/16
- 3/32
- SM3/32
- 3.5
- M3.5
- M3.5
- 4
- 4M
- G4
- M4
- M4.0
- R4
- Rp4
- STI M4
- 4'-11
- M4 to 13
- M4.5
- M4.5
- 5
- 5M
- M5
- M5.0
- M5
- STI M5
- 5/1
- 5/8
- 5/8UN
- G5/8
- NPS5/8
- R5/8
- UNC5/8
- UNF5/8
- W5/8
- 5/8-18UNF
- 5/8-14
- 5/8-11UNC
- 5/8W11
- M5 to 13
- 5/16
- 5/16UN
- 5/16UNF
- 5/16W
- UNC5/16
- UNF5/16
- W5/16
- 5/16-24UNF
- 5/16-18UNC
- 5/16W18
- 5/32
- W5/32
- 5/64
- 5.5M
- M5.5
- M5.5
- 6
- M6
- M6.0
- STI M6
- No6-40UNF
- M6 to 20
- M7
- M7
- PG7
- 7/8
- 7/8UN
- G7/8
- NPS7/8
- R7/8
- UNC7/8
- UNF7/8
- W7/8
- 7/8-14
- 7/8-14UNF
- 7/8-9UNC
- 7/8W9
- 7/16
- 7/16UN
- UNC7/16
- UNF7/16
- W7/16
- 7/16-20UNF
- 7/16-14UNC
- 7/16W14
- 7/32
- SM7/32
- 7.5
- 8
- M8
- STI M8
- 9
- M9
- M9
- PG9
- 9/16
- 9/16UN
- UNF9/16
- W9/16
- 9/16-18UNF
- 9/16-12UNC
- SM9/32
- 9/64
- SM9/64
- 10
- M10
- M10
- STI M10
- Tr 10
- M10 to 13
- M10 to 25
- 11
- M11
- M11
- PG11
- 11/16
- SM11/32
- 11/64
- SM11/64
- 12
- M12
- M12
- STI M12
- Tr 12
- 13
- M13
- PG13.5
- M14
- M14
- Tr 14
- 15
- M15
- 15/64
- SM15/64
- 16
- M16
- M16
- PG16
- Tr 16
- 17
- M17
- M18
- M18
- Tr 18
- 19
- M19
- M19 to 32
- M19 to 38
- 20
- M20
- M20
- Tr 20
- M21
- PG21
- 22
- M22
- M22
- M22X
- Tr 22
- M23
- M24
- M24
- M24X
- Tr 24
- 25
- M25
- M25X
- Tr 25
- M25 to 50
- M25 to 70
- M26
- Tr 26
- M27
- 28
- M28
- Tr 28
- PG29
- M30
- Tr 30
- 31
- 31/32
- M32
- M33
- M34
- M35
- 36
- M36
- PG36
- M37
- M38
- 39
- M39
- M40
- 42
- M42
- PG42
- M44
- M45
- M46
- M48
- M50
- M52
- M56
- 1015
- 1020N100M
- 1020N150M
- 06510X28R
- 10154
- 12204
- 12254N100M
- 12254N150M
- 12254N200M
- 16304N100M
- 16304N150M
- 16304N200M
- 16304N250M
- 20305
- 20505N100M
- 20505N150M
- 20505N200M
- 20505N300M
- 20505N350M
- 25506N100M
- 25506N150M
- 25506N200M
- 25506N300M
- 25506N350M
- 32506
- 32506N150M
- 32506N200M
- 32506N300M
- 035083N075M
- 035083N080M
- 040123N100M
- 060163N050M
- 060163N100M
- 060163N125M
- 065103X28G
- 075203N125M
- 075203N150M
- 080153X19G
- 080153X19R
- 080203N050M
- 080203N100M
- 090244N125M
- 090244N175M
- 100254N050M
- 100254N100M
- 100254N150M
- 100254N200M
- 120204X14G
- 120204X14R
- 120304N100M
- 120304N150M
- 120304N200M
- 160264X11G
- 160264X11R
- 160404N150M
- 160404N200M
- 160404N250M
- 200305X11G
- 200305X11R
- 200505N150M
- 200505N200M
- 200505N300M
-
Screw Types
- Meter
- unified
- Whitworth
- Sewing Machine
- Taper for Pipe
- Parallel for Pipes
- Trapezoid
- Miniature
- Other
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless steel (SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
-
Pitch (P), Number of Threading(mm)
- .02
- 0.025
- 0.05
- 0.08
- 0.1
- 0.125
- 0.15
- 0.175
- 0.2
- 0.225
- 0.25
- 0.3
- 0.35
- 0.4
- 0.45
- 0.5
- 0.6
- 0.63
- 0.7
- 0.75
- 0.75、1.00、1.25、1.50、1.75、2.00、2.50、3.00
- 0.79
- 0.8
- 0.9
- 1
- 1.25
- 1.5
- 1.75
- 2
- 2.5
- 3
- 3.5
- 4
- 4.5
- 5
- 5.5
- 6
- 7
- 8
- 9
- 10
- 10、11、12、14、16、18、20、24F
- 11
- 11 1/2
- 11.5
- 12
- 13
- 14
- 16
- 18
- 19
- 20
- 24
- 26
- 27
- 28
- 30
- 32
- 36
- 40
- 44
- 48
- 56
- 64
- 72
- 80
- 100
- 150
-
Tool Material Type
-
Tap Type
-
Hole type
-
Chamfer threads (Lcf)
-
Coating Type
-
Coating Y/N
-
Overall Length (L)(mm)
Narrow search by specifying Manufacturer
-
- MISUMI (16)
- YAMAWA MFG (77)
- OSG (51)
- NACHI(FUJIKOSHI) (11)
- ISHIHASHI (7)
- TRUSCO NAKAYAMA (7)
- TANOI MFG (4)
- GUHRING (3)
- EIKOSHA (2)
- RUKO (2)
- HOZAN (1)
- LIGHTSEIKI (1)
- SANDVIK (1)
- SKC (1)
- UNION TOOL (1)
- NS TOOL (0)
- H & H (0)
- KANETEC (0)
- KO-KEN TOOL (0)
- MITSUTOMO (0)
- NEW STRONG (0)
- NIIGATA SEIKI (SK) (0)
- ONISHI MANUFACTURING (0)
- TSUBOSAN (0)
- RENNSTEIG (0)
- TOP (0)
- ENGINEER (0)
- ESCO (0)
- NOGA JAPAN (0)
CAD
-
- 2D
- 3D
Related Categories to Screw-Hole-Related Tools
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?