(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
SANDVIK Turning Inserts（work material：Non-ferrous metal）
| Days to Ship |
|
|---|
-
CoroTurn 107 Triangular Shaped 60°
SANDVIK
[Features]
Carbide-coated insert for outer-diameter machining of small components
Precision class
Triangular-shaped insert
Left/right handed insert
Positive insert
For general engineering and machining heat-resistant alloys
For finishingStandard Price: SGD 10.54- Days to Ship: 8 Day(s) or more -
Insert For CoroCut MB, For Grooving, MB-..G
SANDVIK
[Features]
CoroCut MB, insert for grooving
Carbide-coated insert
For grooving
Width: 3.0 mmStandard Price: SGD 32.30- Days to Ship: 8 Day(s) or more -
SANDVIK
[Features]
CoroCut 2 inserts
Solid carbide-coated tip
For parting and grooving
The rail lock provides high clamp rigidity
2-cutting-edge specification
For parting
For high-feed machining
Seat size: G
Width: 3.0 mmStandard Price: SGD 39.30- Days to Ship: 8 Day(s) or more -
CoroCut MB Insert For Face Grooving
SANDVIK
[Features]
CoroCut MB, insert for grooving
Carbide-coated insert
For face grooving
Width: 1.5 mmStandard Price: SGD 61.60- Days to Ship: 8 Day(s) or more -
Standard Price: SGD 50.60- Days to Ship: 8 Day(s) or more -
CoroCut XS Insert For Grooving
SANDVIK
[Features]
Insert for CoroCut XS
Carbide-coated insert
For machining small components
For grooving
Width: 1.5 mmStandard Price: SGD 47.60- Days to Ship: 8 Day(s) or more -
Standard Price: SGD 76.70- Days to Ship: 10 Day(s) -
CoroCut 1/2 For Grooving (2-Flute)
SANDVIK
[Features]
CoroCut 2 inserts
2-cutting-edge specification
Solid carbide-coated insert
High clamp rigidity
For grooving
For medium-feed machining
Seat size: J
Width: 5.0 mmStandard Price: SGD 34.45- Days to Ship: 10 Day(s) -
Standard Price: SGD 56.70- Days to Ship: 8 Day(s) or more -
SANDVIK
[Features]
T-Max Q-Cut insert
Solid carbide-coated insert
For parting and -grooving
Single-cutting-edge specification
For profiling
For medium-feed machining
Full R
Width: 3.0 mmStandard Price: SGD 21.70- Days to Ship: 8 Day(s) or more -
CoroThread 266 NPT 60° NPSC, NPTR, LINEPIPE1) With Finishing Blade
SANDVIK
[Features]
CoroThread 266, insert for threading
Solid carbide-coated insert
Newly designed inserts with improved ease of mounting and a guide rail with high clamp rigidity
For outer-diameter threading
For NPT 60° threads
Machining pitch: for 18 threadsStandard Price: SGD 39.90- Days to Ship: 8 Day(s) or more -
Standard Price: SGD 158.88- Days to Ship: 8 Day(s) or more -
SANDVIK
[Features]
CoroCut 2 inserts
Solid carbide-coated tip
For parting and grooving
The rail lock provides high clamp rigidity
2-cutting-edge specification
For grooving
For low-feed machining
Seat size: F
Width: 3.0 mm
Full RStandard Price: SGD 43.30- Days to Ship: 8 Day(s) or more -
SANDVIK
[Features]
Insert for CoroCut XS
Carbide-coated insert
For machining small components
For parting
Width: 2 mmStandard Price: SGD 48.30- Days to Ship: 8 Day(s) or more -
CoroTurn 107 Diamond Shaped 35°
SANDVIK
[Features]
Carbide-coated insert for outer-diameter machining of small components
Left/right handed insert
Diamond-shaped 35° insert
Positive insert
For general engineering and machining heat-resistant alloys
For finishingStandard Price: SGD 26.22- Days to Ship: 8 Day(s) or more -
CoroTurn 107 Round Insert For Turning
SANDVIK
[Features]
Carbide-coated insert for outer-diameter machining of small components
Round insert
Positive insert
For machining heat-resistant alloys
For semi-finishingStandard Price: SGD 15.00 Days to Ship: 10 Day(s) -
Standard Price: SGD 9.45 Days to Ship: 8 Day(s) -
SANDVIK
[Features]
T-Max Q-Cut insert
Solid carbide-coated insert
For parting and grooving
Single-cutting-edge specification
For machining reliefs, recesses etc.
For medium-feed machining
Width: 4.0 mmStandard Price: SGD 30.20 Days to Ship: 10 Day(s) -
CoroThread 266 Metric 60° With Finishing Blade
SANDVIK
[Features]
CoroThread 266, insert for threading
Solid carbide-coated insert
Newly designed inserts with improved ease of mounting and a guide rail with high clamp rigidity
For outer-diameter threading
For metric threads
Machining pitch: for 5.0 mmStandard Price: SGD 39.59- Days to Ship: 8 Day(s) or more -
CoroThread 266 Whitworth 55° (BSW, BSF, BSP) With Finishing Blade
SANDVIK
[Features]
CoroThread 266, insert for threading
Solid carbide-coated insert
Newly designed inserts with improved ease of mounting and a guide rail with high clamp rigidity
For outer-diameter threading
For 55° Whitworth threads
Machining pitch: for 5 threadsStandard Price: SGD 39.90- Days to Ship: 8 Day(s) or more -
SANDVIK
[Features]
CoroThread 266, insert for threading
Solid carbide-coated insert
Newly designed inserts with improved ease of mounting and a guide rail with high clamp rigidity
For outer-diameter threading
For BSPT 55° threads
Machining pitch: for 11 threadsStandard Price: SGD 44.20- Days to Ship: 8 Day(s) or more -
ISO Trapezoid 30° Thread Crest, With Chamfering Blade
SANDVIK
[Features]
CoroThread 266, insert for threading
Solid carbide-coated insert
Newly designed inserts with improved ease of mounting and a guide rail with high clamp rigidity
For outer-diameter threading
For trapezoidal 30° threads
Machining pitch: for 8 mmStandard Price: SGD 49.90- Days to Ship: 8 Day(s) or more -
SANDVIK
[Features]
CoroCut 1 inserts
1-cutting-edge specification
Solid carbide-coated insert
High clamp rigidity
For grooving
For medium-feed machining
Seat size: G
Width: 4.0 mm
Full RStandard Price: SGD 30.20- Days to Ship: 8 Day(s) or more -
CoroCut 1/2 For Profiling & Turning
SANDVIK
[Features]
CoroCut 2 inserts
Solid carbide-coated tip
For parting and grooving
The rail lock provides high clamp rigidity
2-cutting-edge specification
For turning
For medium-feed machining
Seat size: G
Width: 3.0 mmStandard Price: SGD 51.30- Days to Ship: 8 Day(s) or more -
T-Max P CBN Negative Insert For Turning (Diamond Shaped 80°)
SANDVIK
T-Max P CBN Negative Insert
[Application]
Outer Diameter/Inner Diameter
[Specifications]
Shape: C (80° Diamond-Shape)
Available corners: 2
Rake angle: Negative
Selfishly: No-hand
Tip relief angle(°): 0Standard Price: SGD 21.90- Days to Ship: 10 Day(s) -
SANDVIK
[Features]
T-Max S, carbide-coated insert for general machining
Precision class
Square-shaped insert
Positive insert
For general steel machining
Without breakerStandard Price: SGD 8.36- Days to Ship: 8 Day(s) or more -
Standard Price: SGD 70.78- Days to Ship: 10 Day(s) -
CoroCut XS Insert For Threading Without Finishing Blade V-Shaped 60°
SANDVIK
[Features]
Insert for CoroCut XS
Carbide-coated insert
For machining small components
For threadingStandard Price: SGD 48.30- Days to Ship: 8 Day(s) or more -
CoroCut XS Insert For Front Turning / Back Turning
SANDVIK
[Features]
CoroCut XS insert
For outer-diameter machining of small components
Carbide-coated insert
For back turning
Nose R: 0.20 mmStandard Price: SGD 48.30- Days to Ship: 8 Day(s) or more -
CoroTurn 107 Positive Insert For Turning (Square Shaped 90°)
SANDVIK
[Features]
A carbide-coated insert for machining the general inner diameters and outer diameters of small components
Square-shaped insert
Positive insert
For machining stainless steel
For finishingStandard Price: SGD 19.40 Days to Ship: 8 Day(s) -
Standard Price: SGD 17.00- Days to Ship: 8 Day(s) or more -
Standard Price: SGD 23.76- Days to Ship: 10 Day(s) -
Standard Price: SGD 279.07- Days to Ship: 10 Day(s) -
Standard Price: SGD 29.76- Days to Ship: 8 Day(s) or more -
Standard Price: SGD 33.97- Days to Ship: 10 Day(s) -
Standard Price: SGD 45.96- Days to Ship: 8 Day(s) or more -
Standard Price: SGD 232.96 Days to Ship: 8 Day(s) -
Standard Price: SGD 20.90- Days to Ship: 10 Day(s) -
Standard Price: SGD 15.87- Days to Ship: 3 Day(s) or more -
SANDVIK
[Features]
T-Max Q-Cut insert
Solid carbide-coated insert
For parting and grooving
Single-edge specification
For grooving
For low-feed machining
Width: 5.0 mmStandard Price: SGD 19.90- Days to Ship: 8 Day(s) or more -
Standard Price: SGD 20.00- Days to Ship: 8 Day(s) or more -
T-Max Q-Cut (151.3 Type) For Face Grooving, Inner Diameter Grooving, Turning
SANDVIK
[Features]
T-Max Q-Cut insert
Solid carbide-coated insert
For parting and grooving
Single-cutting-edge specification
For grooving
For low-feed machining
Width: 4.0 mmStandard Price: SGD 21.60- Days to Ship: 8 Day(s) -
CoroThread 266 V-Shaped 55° Without Finishing Blade
SANDVIK
[Features]
CoroThread 266, insert for threading
Solid carbide-coated insert
Newly designed inserts with improved ease of mounting and a guide rail with high clamp rigidity
For inner-diameter threading
Without finishing blade, for 55° threads
Machining pitch: for 7-4 threadsStandard Price: SGD 39.90- Days to Ship: 8 Day(s) or more -
CoroThread 266 UN 60° With Finishing Blade
SANDVIK
[Features]
CoroThread 266, insert for threading
Solid carbide-coated insert
Newly designed inserts with improved ease of mounting and a guide rail with high clamp rigidity
For outer-diameter threading
For inch threads
Machining pitch: for 5 threadsStandard Price: SGD 39.59- Days to Ship: 8 Day(s) or more -
Standard Price: SGD 44.90 Days to Ship: 10 Day(s)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Shape |
| work material |
| Application |
| Available corners |
| Breaker Use |
| Rake angle |
| Nose R |
| Selfishly |
| Groove Width (For Grooving / Plunging) |
| Pitch (for Threading) |
| O.D./ I.D. (For Threading) |
| Screw Types (for threading) |
| Number of threads (for threading) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK |
| Product Series | CoroThread 266 NPT 60° NPSC, NPTR, LINEPIPE1) With Finishing Blade | CoroTurn XS Insert Bar For Face Grooving CXS..F..AR/L(1)/CXS..F..AR/L(2) | CoroThread 266 Whitworth 55° (BSW, BSF, BSP) With Finishing Blade | T-Max P CBN Negative Insert For Turning (Diamond Shaped 80°) | CoroCut XS Insert For Threading Without Finishing Blade V-Shaped 60° | CoroTurn 107 Positive Insert For Turning (Square Shaped 90°) | T-Max Q-Cut (151.3 Type) For Face Grooving, Inner Diameter Grooving, Turning | ||||||||||||||||||||||||||||||||||||||
| Days to Ship | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 10 Day(s) | 10 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 10 Day(s) | 8 Day(s) | 10 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 10 Day(s) | 8 Day(s) or more | 10 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) | 8 Day(s) or more | 10 Day(s) | 10 Day(s) | 8 Day(s) or more | 10 Day(s) | 8 Day(s) or more | 8 Day(s) | 10 Day(s) | 3 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 10 Day(s) |
| Shape | T (Triangle) | Other | Other | Other | T (Triangle) | Other | T (Triangle) | Other | Other | Other | T (Triangle) | Other | Other | Other | V (35° Diamond-Shaped) | R (Circular) | T (Triangle) | Other | T (Triangle) | T (Triangle) | T (Triangle) | T (Triangle) | Other | Other | C (80° Diamond-Shape) | S (Rectangular) / T (Triangle) | Other | Other | Other | S (Rectangular) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | Other | Other | Other | T (Triangle) | T (Triangle) | Other | T (Triangle) | Other | Other | Other | T (Triangle) | T (Triangle) | T (Triangle) |
| work material | Non-ferrous metal | Non-ferrous metal | Non-ferrous metal | Non-ferrous metal | Non-ferrous metal | Non-ferrous metal | Non-ferrous metal | Non-ferrous metal | Non-ferrous metal | Non-ferrous metal | Non-ferrous metal | Non-ferrous metal | Non-ferrous metal | Non-ferrous metal | Non-ferrous metal | Non-ferrous metal | Non-ferrous metal | Non-ferrous metal | Non-ferrous metal | Non-ferrous metal | Non-ferrous metal | Non-ferrous metal | Non-ferrous metal | Non-ferrous metal | Non-ferrous metal | Non-ferrous metal | Non-ferrous metal | Non-ferrous metal | Non-ferrous metal | Non-ferrous metal | Non-ferrous metal | Non-ferrous metal | Non-ferrous metal | Non-ferrous metal | Non-ferrous metal | Non-ferrous metal | Non-ferrous metal | Non-ferrous metal | Non-ferrous metal | Non-ferrous metal | Non-ferrous metal | Non-ferrous metal | Non-ferrous metal | Non-ferrous metal | Non-ferrous metal |
| Application | Outer Diameter/Inner Diameter | Grooving / Parting | Grooving / Parting | Grooving / Parting | Threading | Grooving / Parting | Threading | Grooving / Parting | Grooving / Parting | Grooving / Parting | Threading | Grooving / Parting | Grooving / Parting | Grooving / Parting | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Grooving / Parting | Threading | Threading | Threading | Threading | Grooving / Parting | Grooving / Parting | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Grooving / Parting | Threading | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Grooving / Parting | Grooving / Parting | Grooving / Parting | Grooving / Parting | Threading | Grooving / Parting | Outer Diameter/Inner Diameter | Grooving / Parting | Grooving / Parting | Grooving / Parting | Threading | Threading | Threading |
| Available corners | 3 | 1 | 2 | 1 | 3 | 2 | 3 | 1 / 2 | 1 | 1 | 3 | 1 | 2 | 2 | 2 | 1 | 3 | 1 | 3 | 3 | 3 | 3 | 1 | 2 | 2 | 3 / 4 | 1 | 2 | 2 | 4 | 2 | 2 | 1 | 1 | 1 | 3 | 1 | 1 | 3 | 1 | 1 | 1 | 3 | 3 | 3 |
| Breaker Use | Finish / Medium grinding | - | - | - | - | - | Finish | - | - | - | Finish | - | - | - | Finish / Medium grinding | - | - | - | Finish | Finish | Finish | - | - | - | - | - | - | Finish | - | - | Finish / Medium grinding | - | - | - | - | - | - | - | Finish / Medium grinding | - | - | - | - | Finish | Finish |
| Rake angle | Pozidriv | - | - | - | - | - | - | - | - | - | - | - | - | - | Pozidriv | Pozidriv | - | - | - | - | - | - | - | - | Negative | - | - | - | - | Pozidriv | Negative | Negative | - | - | - | - | - | - | Negative | - | - | - | - | - | - |
| Nose R | 0.2 ～ Other | Other | 0.2 | 0.2 ～ Other | - | Other | - | 0.8 ～ Other | 0.2 | Other | - | 0.2 | Other | Other | 0.2 ～ Other | Other | 0.4 | Other | - | - | - | - | Other | 0.8 ～ 1.2 | 0.8 ～ 1.2 | 0.4 ～ Other | Other | Other | 0.2 ～ Other | 0.8 | 0.4 ～ 1.6 | 0.8 ～ 1.2 | Other | 0.2 | Other | Other | - | Other | 0.4 ～ 0.8 | 0.2 ～ Other | 0.2 ～ Other | 0.4 ～ Other | Other | - | - |
| Selfishly | Right-hand / Left-hand / No-hand | Right-hand / Left-hand | Right-hand / Left-hand / No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand | No-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand / No-hand | No-hand | No-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand / No-hand | No-hand | No-hand | No-hand | Right-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | No-hand | No-hand | No-hand | No-hand | Left-hand | Right-hand / Left-hand | Right-hand | Right-hand / Left-hand | No-hand | No-hand | No-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand |
| Groove Width (For Grooving / Plunging) | - | 0.73 mm ～ 3.18 mm | 2.0 mm ～ 5.0 mm | 1.00 mm ～ 4.00 mm | - | 0.50 mm ～ 2.50 mm | - | 3.18 mm ～ 10.00 mm | 1.50 mm ～ 4.00 mm | 3.00 mm ～ 10.00 mm | - | 2.00 mm ～ 5.00 mm | 3.00 mm ～ 8.00 mm | 0.70 mm ～ 2.50 mm | - | - | - | 3.00 mm | - | - | - | - | 2.00 mm ～ 8.00 mm | 5.00 mm ～ 8.00 mm | - | - | 2.00 mm ～ 3.00 mm | - | - | - | - | - | 3.00mm ～ 8.00mm | 2.7mm ～ 3.8mm | 1.00mm ～ 2.00mm | 2.15mm ～ 4.15mm | - | 2.00mm ～ 5.00mm | - | 1.85 mm ～ 10.00 mm | 1.85 mm ～ 6.00 mm | 3.00 mm ～ 6.00 mm | - | - | - |
| Pitch (for Threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.50 mm ～ 5.50 mm | - | - | 1.50 mm ～ 3.00 mm | - | - | - | - | - | Min. 0.2 mm / Max. 1 mm ～ Min. 0.2 mm / Max. 2 mm | - | - | - | - | - | - | - | - | 1.5-3mm | - | - | - | - | - | - | - | - |
| O.D./ I.D. (For Threading) | - | - | - | - | Outer Diameter / Internal Diameter | - | Outer Diameter / Internal Diameter | - | - | - | Outer Diameter / Internal Diameter | - | - | - | - | - | - | - | Outer Diameter / Internal Diameter | Outer Diameter / Internal Diameter | Outer Diameter / Internal Diameter | Outer Diameter / Internal Diameter | - | - | - | - | - | - | Outer Diameter | - | - | - | - | - | - | - | Internal Diameter | - | - | - | - | - | Outer Diameter / Internal Diameter | Outer Diameter / Internal Diameter | Outer Diameter / Internal Diameter |
| Screw Types (for threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ISO Meter 60° | Whitworth 55° | - | Trapezoid 30° | - | - | - | - | - | General Purpose 60° | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | unified 60° | - |
| Number of threads (for threading) | - | - | - | - | 3TPI ～ 16TPI | - | 4TPI ～ 5TPI | - | - | - | 8TPI ～ 27TPI | - | - | - | - | - | - | - | - | 4.5TPI ～ 28TPI | 8TPI ～ 28TPI | - | - | - | - | - | - | Min. 80 / Max. 12 (inches) ～ Min. 80 / Max. 24 (inches) | - | - | - | - | - | - | - | - | 16-8TPI | - | - | - | - | - | 7-4TPI ～ 28-14TPI | 4.5TPI ～ 32TPI | 8TPI ～ 27TPI |
Loading...
Configure
Specification/Dimensions
-
Shape
- C (80° Diamond-Shape)
- D (55° Diamond-Shape)
- R (Circular)
- S (Rectangular)
- T (Triangle)
- V (35° Diamond-Shaped)
- W (Hexagonal Type)
- Other
-
work material
- Steel
- Stainless Steel
- Cast Iron
- Non-ferrous metal
- Heat-resistant alloy, titanium alloy
- High Hardness Material
-
Application
- Outer Diameter/Inner Diameter
- Grooving / Parting
- Threading
- Other
-
Available corners
- 1
- 2
- 3
- 4
- 6
- 8
- 9 or more
-
Breaker Use
- Finish
- Medium grinding
- Medium to deep grinding
- Heavy cutting
- Light Cutting
- Rough cutting
- Medium to coarse grinding
-
Rake angle
- Negative
- Pozidriv
-
Nose R
-
Selfishly
-
Groove Width (For Grooving / Plunging)
-
Pitch (for Threading)
-
O.D./ I.D. (For Threading)
-
Screw Types (for threading)
-
Number of threads (for threading)
Narrow search by specifying Manufacturer
-
- MISUMI (5)
- SUMITOMO ELECTRIC HARDMETAL (342)
- KYOCERA (107)
- SANDVIK (80)
- NGK SPARK PLUG (22)
- TUNGALOY (16)
- BIG DAISHOWA SEIKI (5)
- OSG (2)
- SANWA SEISAKUSYO (2)
- WIDIA (1)
- NOGA JAPAN (0)
- KOSHUHA (0)
CAD
-
- 2D
- 3D
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?