Locating Pins（Insertion Guide Tip Type：Tapered）

• 

  MiSUMi Economy

  Locating Pin - Straight, Configurable[RoHS Comliant]

  MISUMI

  RoHS10 compliant.
  Straight Type Locating Pins with the diameter configurable in 0.01 mm increments.
  * Minimum order quantity is set. The minimum order quantity may differ depending on the type and size. Please check details in the Part Number tab or WOS (Web Order System).

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

• 

  Locating Pins - Tip Shape Selectable (Straight Tapped)

  MISUMI

  - Locating Pins - Tip Shape Selectable (Straight Tapped) from MISUMI.
  - The tip shape is selectable from three types. To be mounted from back using bolts. Improved maintainability compared to the press fit type.
  - The material of locating pin can be selected 4 types, S45C Equivalent, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - SUS440C or 13Cr stainless of round type and diamond type has an identification groove at any position on D part.
  - The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• • On Sale Till 31/03/2025

  

  Locating Pins - Large Head, Tapered (Press Fit)

  MISUMI

  - Locating Pins - Large Head, Tapered (Press Fit) from MISUMI.
  - Tapered Head Standard Type. Press Fit. Economical and there is a variety of selections to choose from. Same day shipping available.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polished, centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - The insertion guide is applicable to tolerance p6 only.
  

  • Volume Discount

  CAD ：

  2D / 3D

  	Special Price
  Days to Ship:	Same day or more

• 

  MiSUMi Economy

  Locating Pins Straight, Tapered, Standard, Tapped

  MISUMI

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s)

• • On Sale Till 31/03/2025

  

  Small Diameter Locating Pin - Straight / Small Head

  MISUMI

  - Small Diameter Locating Pin - Straight / Small Head from MISUMI.
  - Insertion Guide Tip Type can be selected into 4 types, Tapered tip, Taper R tip, Spherical tip, and Flat tip.
  - The material of locating pin can be selected 5 types, Steel SKD61, Steel SK95(SK4), Stainless Steel SUS304, Stainless Steel SUS304 Equivalent, Stainless Steel SUS440C or 13Cr.
  - The outer diameter of the locating pin can be configurable up to 3 mm.
  - SUS304 may not be polished.
  

  • Volume Discount

  CAD ：

  2D / 3D

  	Special Price
  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - Tip Shape Selectable (Full Threaded)

  MISUMI

  - Locating Pins - Tip Shape Selectable (Full Threaded) from MISUMI.
  - Screw-fitting type without pilot. Costs for hole machining on fixtures can be reduced.
  - The material of pin can be selected 2 types, steel SKS3 Equivalent or stainless steel SUS304.
  - The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
  - Provided 3 options for alteration, Wrench flat, Wrench hole (φ3.5 mm) or Hex socket machining.
  - Any alteration cannot be combined with the other alteration.
  

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Locating Pins - Tip Shape Selectable (Threaded)

  MISUMI

  - Locating Pins - tip shape selectable (Threaded) from MISUMI.
  - Insertion guide tip type can be selected 3 types, Tapered, Taper R, and Spherical.
  - Insertion guide tip shape can be selected 2 types, round, and diamond.
  - The material of locating pin can be selected 4 types, SKS3 Equivalent, S45C Equivalent, SUS304, SUS440C or 13Cr stainless.
  - A fully threaded type of L=0 without pivot is also available.
  - Polished, centering hole is may not available for SUS304.
  

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  MiSUMi Economy

  Large Head Locating Pins - Tapered

  MISUMI

  - Large Head Locating Pins – Tapered tip type C-JPBB / C-JPDB series from MISUMI.
  - This is an economy item; The price is cheaper than the MISUMI standard product.
  - Standard type with tapered lead-in part. Press-fit use, the tolerance of the press-fit part can be specified: m6, p6, g6.
  - The head is available in round and polygonal types. The fixed type is cheap, and the freely specified type is rich in specifications.
  - Optional Material: Iron (SKS3); Stainless Steel (SUS304, SUS440C), suitable for positioning of a variety of workpieces.
  - Hard chrome plated surface, effectively ensuring surface hardness and antirust.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 2.28-
  Days to Ship:	Same day

• • On Sale Till 31/03/2025

  

  Locating Pins - Air Vent (Tapped)

  MISUMI

  - Locating Pins - Air Vent (Tapped) from MISUMI.
  - Since there is an air groove, it is easy to insert a pin. It is attached with a female thread.
  - The material of pin can be selected 3 types, SUJ2 or SUS304 Equivalent, SUS440C or 13Cr stainless.
  - Mounting method can be selected 2 types, Thread or Tapped.
  - The outer diameter of pin can be selected 5 sizes, 5, 6, 8, 10, and 12 mm.
  - The tolerance of outer diameter is g6.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 1.94-
  	Special Price
  Days to Ship:	Same day or more

• 

  Locating Pins - Small Head, Tapered (Press Fit)

  MISUMI

  - Locating Pins - Small Head, Tapered (Press Fit) from MISUMI.
  - Tapered Head Standard Type. Press Fit. Economical and there is a variety of selections to choose from. Same day shipping available.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polished, centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - The insertion guide is applicable to both the tolerance m6 and p6.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Small Diameter Locating Pins - High Hardness Stainless Steel - Solid

  MISUMI

  - Small Diameter Locating Pins - High Hardness Stainless Steel – Solid from MISUMI.
  - Locating Pins for Micromachining less than Ø3. Corrosion-resistant and rigid. Suitable for locating Base, etc.
  - The tip shape is selectable from four types, Flat (SF), Sphere (SP), Taper (ST), or Tapered (SX).
  - Chamfering or tolerance changing of mounting portion is available as alteration.
  - Note that High Hardness Stainless Steel contains Mn and dissolves by acid.
  - High Hardness Stainless Steel is weakly magnetic.
  

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

• 

  Locating Pin High Hardness Stainless Steel Straight Tip Shape Selection -Press Fit-

  MISUMI

  Straight Type with the diameter configurable in 0.01 mm increments has been newly offered. For orders of up to 1,000 pcs., 7th day shipping is available.

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

• 

  MiSUMi Economy

  Locating Pins Small Head, Tapered, Tapped

  MISUMI

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s)

• 

  Locating Pins - Large Head, Tapered (Tapped)

  MISUMI

  - Locating Pins - Large Head, Tapered (Tapped) from MISUMI.
  - Large Head, Tapered with the shape designed to be mounted from back using bolts. Improved maintainability compared to Press Fit Type.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polished, centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Insertion guide tip shape can be selected 2 types, round, and diamond.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Height Adjusting Pins - Press Fit

  MISUMI

  - Height Adjusting Pins - Press Fit from MISUMI.
  - Small Head, Tapered, with each dimension configurable. The tolerances on both ends and the tapered dimensions are also configurable.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polished, centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Hard Chrome Plating products are not available in Precision Grade Tolerance.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - Shouldered (Tapered - Shoulder Thickness Configurable-Tapped)

  MISUMI

  - Locating Pins - Shouldered (Tapered - Shoulder Thickness Configurable-Tapped) from MISUMI.
  - Insertion guide tip shape can be selected 2 types, round, and diamond.
  - SUS440C or 13Cr stainless has an identification groove on D part.
  - A machining step remains on the shoulder top for Diamond Shape.
  - SUS304 may not be polished and may have no centering hole.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  MiSUMi Economy

  Locating Pins Tip Shape Selectable, Tapped

  MISUMI

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s)

• 

  Locating Pins - Tip Shape Selectable (Configurable Shoulder Thickness-Threaded)

  MISUMI

  - Locating Pins - Tip Shape Selectable (Configurable Shoulder Thickness-Threaded) from MISUMI.
  - The tip shape and the fixed shape of the Shouldered type are selectable from three types respectively.
  - The material of pin can be selected 4 types, steel SKS3 Equivalent, S45C, stainless steel SUS304, SUS440C or 13Cr stainless.
  - SUS304 may not be polished and may have no centering hole.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - A machining step remains on the shoulder top for Diamond shape.
  

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

• 

  MiSUMi Economy

  Locating Pins Large Head, Tapered, Threaded

  MISUMI

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s)

• 

  Locating Pins - Plastic, Large Head - Press Fit

  MISUMI

  - Locating Pins - Plastic, Large Head - Press Fit from MISUMI.
  - Plastic Locating Pins which prevent workpiece damage.
  - Insertion guide tip type can be selected 3 types, Tapered, Flat and Spherical.
  - The outer diameter tolerance is the result of measurement at room temperature.
  - The material of locating pin can be selected 4 types, Polyacetal (Black), MC Nylon (Blue), Conductive MC Nylon CDR2 (Black), or PEEK (Natural Ivory).
  - The mounting method is press fit, with m6 tolerance.
  

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Locating Pins - Sphere Small Head - Press Fit

  MISUMI

  Full Thread Type has been newly added to the High Hardness Stainless Steel Locating Pin product line-up. For orders of up to 1,000 pcs., 7th day shipping is available.

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

• 

  Locating Pins - Tip Shape Selectable (Press Fit)

  MISUMI

  - Locating Pins - Tip Shape Selectable (Press Fit) from MISUMI.
  - The tip shape is selectable from three types, Tapered (A), Taper R (B), Spherical (C). Highly customizable with each dimension configurable. Press Fit.
  - The material of pin can be selected 4 types, steel SKS3 Equivalent, S45C, stainless steel SUS304, SUS440C or 13Cr stainless.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Polishing and centering hole is sometimes not available for SUS304.
  

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Locating Pins - High Hardness Stainless Steel Large Head, Tapered (Press Fit)

  MISUMI

  - Locating Pins - High Hardness Stainless Steel Large Head, Tapered (Press Fit) from MISUMI.
  - Large Head Tapered with each dimension configurable. We reduced the price drastically compared to the conventional products.
  - The material of this locating pin is made of High hardness stainless steel with a hardness level at 35HRC~.
  - If the diameter exceeds Ø10, core hardness may be 30HRC~.
  - For high hardness stainless steel large head tapered type, the configurable range of dimensions has been further widened and the number of available alterations has been increased.
  

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

• 

  Locating Pins - Straight, Tapered (Press Fit)

  MISUMI

  - Locating Pins - Large Head, Tapered (Threaded) from MISUMI.
  - Large Head, Tapered, Press Fit + Lock Nut Shape. Improved maintainability compared to Press Fit Type.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Polishing and centering hole sometimes not available for SUS304.
  - Provided 2 options of alteration, Wrench Hole Machining (LAC), or Wrench Flats (SC).
  

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• • On Sale Till 31/03/2025

  

  Locating Pins - Air Vent (Threaded)

  MISUMI

  [Features]Since there is an air groove, it is easy to insert a pin. It is attached with a male thread.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 3.76-
  	Special Price
  Days to Ship:	Same day or more

• 

  Locating Pins - Small Head, Round Tapered - Press Fit

  MISUMI

  - Locating Pins - Small Head, Round Tapered - Press Fit from MISUMI.
  - Large Head, Tapered, with configurable dimensions for each part. The tolerances on both ends and the tapered dimensions are also configurable.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polished, centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• • On Sale Till 31/03/2025

  

  Locating Pins - Small Head, Tapered (Tapped)

  MISUMI

  - Locating Pins - Small Head, Tapered (Tapped) from MISUMI.
  - Small Head, Tapered with the shape designed to be mounted from back using bolts. Improved maintainability compared to Press Fit Type.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polished, centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Insertion guide tip shape can be selected 2 types, round, and diamond.
  

  • Volume Discount

  CAD ：

  2D / 3D

  	Special Price
  Days to Ship:	Same day or more

• 

  Small Diameter Locating Pins - High Hardness Stainless Steel - Small Head

  MISUMI

  "High accuracy positioning is available, because the O.D. can be configured in 0.01mm increment on either of the mounting side or the locating side."

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

• 

  MiSUMi Economy

  Locating Pins Large Head, Tapered, Screw Mounted, Standard/Compact

  MISUMI

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s)

• 

  Small Diameter Locating Pin - with Shoulder Seat

  MISUMI

  - Small Diameter Locating Pin - with Shoulder Seat from MISUMI.
  - Insertion Guide Tip Type can be selected into 4 types, Tapered tip, Spherical tip, and Flat tip.
  - The outer diameter of the locating pin can be configurable from 1.0 to 3.5 mm.
  - The shoulder part is provided to prevent pin extraction.
  - The overall length of the product can be configurable from 13.0 mm to 30.0 mm.
  - The material of locating pin is made of Stainless Steel SUS304.
  

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Locating Pins - Small Head, Round Tapered - Tapped

  MISUMI

  - Locating Pins - Small Head, Round Tapered – Tapped from MISUMI.
  - Large Head, Tapered, with configurable dimensions for each part. The tolerances on both ends and the tapered dimensions are also configurable.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polished and centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Locating Pins - Large Head, Tapered (Threaded)

  MISUMI

  - Locating Pins - Large Head, Tapered (Threaded) from MISUMI.
  - Large Head, Tapered, Press Fit + Lock Nut Shape. Improved maintainability compared to Press Fit Type.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Polishing and centering hole sometimes not available for SUS304.
  - Provided 2 options of alteration, Wrench Hole Machining (LAC), or Wrench Flats (SC).
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Locating Pins - Large Head, Tapered - Threaded, Hex Socket

  MISUMI

  - Locating Pins - Large Head, Tapered - Threaded, Hex Socket from MISUMI.
  - Hex Socket is attached to the tip of Large Head, Tapered, Threaded. It is easy to mount as you can stop the head rotation.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Small Diameter Locating Pin - Small Head / Press Fit

  MISUMI

  - Small Diameter Locating Pin - Small Head / Press Fit from MISUMI.
  - Insertion Guide Tip Type can be selected 4 types, Tapered, Taper R, Spherical and Flat.
  - Material code SG and DG are applicable to L configurable type of sphere only.
  - L selectable type is applicable to spherical tip type only.
  - SUS304 may not be polished.
  - Chamfering of mounting portion and change of tolerance are available as alterations.
  - Shaft diameter can be configured up to 3 mm.
  

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  One-Touch Flex Locator, Cam Handle Type (Pin)

  IMAO CORPORATION

  - ONE-TOUCH FLEX LOCATOR CLAMPERS (Cam Handle) from IMAO CORPORATION.
  - The shape of tips can be selected 2 types, Tapered pin (CP731-LC), Straight pin (CP731-SC).
  - The body of ONE-TOUCH FLEX LOCATOR CLAMPERS is made of SCM440 steel Nitrocarburized.
  - The Cam Handle of ONE-TOUCH FLEX LOCATOR CLAMPERS is made of SCM440 steel, Black oxide finished, Quenched & tempered.
  - The ball of ONE-TOUCH FLEX LOCATOR CLAMPERS is made of SUJ2 steel.
  - Clamping and unclamping by cam handle.
  

  CAD ：

  2D / 3D

  Standard Price:	SGD 281.27-
  Days to Ship:	9 Day(s) or more

• 

  Locating Pins - Shouldered (Tapered - Shoulder Thickness Configurable-Press Fit)

  MISUMI

  - Locating Pins - Shouldered (Tapered - Shoulder Thickness Configurable-Press Fit) from MISUMI.
  - Insertion guide tip shape can be selected 2 types, round, and diamond.
  - SUS440C or 13Cr stainless has an identification groove on D part.
  - A machining step remains on the shoulder top for Diamond Shape.
  - SUS304 may not be polished and may have no centering hole.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Positioning Pin - High Hardness Stainless Steel, Shouldered, Tepered Press Fit

  MISUMI

  Shouldered and Tapered Type has been newly added to the High Hardness Stainless Steel Locating Pin product line-up. For orders of up to 500 pcs., 5th day shipping is available.

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

• 

  [Clean & Pack] Small Diameter Locating Pin - Straight

  MISUMI

  Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
  This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

  ■Part Number for Clean & Pack Products

  ·Degreasing (Anti-rust single packing)	: Part Number SL-□□
  ·Precision cleaning (Degassing double packing)	: Part Number SH-□□
  ·Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

  Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
  SL-□□	Degreasing	Anti-rust packing	Oil removal	General environment	Regular assembly process
  					Post battery assembly process
  SH-□□	Precision cleaning	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
  					LCD-related post assembly process
  					In-vehicle camera assembly process
  SHD-□□	Electrolytic polishing + precision cleaning	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
  					Liquid crystal deposition process
  					Pre-OLED process

  ■Notes
  Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
  Please be careful about the application location and storage environment.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	7 Day(s) or more

• 

  MiSUMi Economy

  Locating Pins Large Head, Tapered, Configurable - Taper Angle, Tolerance Selectable, Press Fit

  MISUMI

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s)

• 

  Locating Pins - Flanged Flat

  MISUMI

  - Locating pins - flanged flat from MISUMI.
  - Insertion guide tip shape can be selected 2 types, round, and diamond.
  - Insertion guide tip type can be selected 2 types, Tapered (A shape), and Taper R (B Shape).
  - The flange of pin has 2 shapes available, round flange and compact flange.
  - It can be used by fixing the flange with bolts. 2 types of tip shapes are available.
  - The material of pin can be selected 2 types, SKS3 Equivalent or SUS304 Equivalent.
  

  CAD ：

  2D / 3D

  Days to Ship:	7 Day(s)

• 

  Feed Pins - Shouldered - Threaded

  MISUMI

  Locating Pins with the tapered part configurable to be longer. The Shoulder supports the workpiece so that it will not damage the base.

  CAD ：

  2D / 3D

  Days to Ship:	7 Day(s)

• 

  Small Diameter Locating Pin - Shouldered, Threaded

  MISUMI

  - Small Diameter Locating Pin - Shouldered, Threaded from MISUMI.
  - Insertion Guide Tip Type can be selected 4 types, Tapered, Taper R, Spherical and Flat.
  - The material of pin can be selected 2 types, SK95 (SK4) Equivalent and SUS304.
  - The hardness of steel pin is 50～58HRC.
  - SUS304 may not be polished.
  - When L=0, an undercut will be added at the neck of the thread.
  - Shaft diameter can be selected up to 4 mm.
  

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  MiSUMi Economy

  Locating Pins Large Head, Tapered, Press Fit, Standard

  MISUMI

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s)

• 

  Pusher Pins - Straight

  MISUMI

  - Pusher Pins – Straight from MISUMI.
  - Insertion Guide Tip Type can be selected 4 types, Tapered, Taper R, Spherical and Flat.
  - The material of pin can be selected 3 types, Conductive MC Nylon CDR2 (Black), PEEK (Natural Ivory), Polyacetal (White).
  - The outer diameter of pin can be selected 7 sizes, 6, 8, 10, 12, 15, 20 and 25 mm.
  - The mounting thread length is M x 2. (When L<20, the mounting thread length is M x 1.5).
  

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Feed Pins - Solid - Press Fit

  MISUMI

  - Feed Pins - Solid - Press Fit from MISUMI.
  - Length of tapered part can be specified depending on applications or environment. It is installed by press-fitting.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - SUS304 feed Pins may not be polished and may have no centering hole.
  - The outer diameter of the mounting part can be selectable from 2 mm to 10 mm.
  - The outer diameter of the feed pin tip can be selectable from 2.5 mm to 13 mm.
  

  CAD ：

  2D / 3D

  Days to Ship:	7 Day(s)

Loading...