Locating Pins（Insertion Guide Tip Type：Spherical）

• • Recommendation

  

  MiSUMi Economy

  Large Head Locating Pins - Spherical

  MISUMI

  - Large Head Locating Pins – Spherical tip type, C-JPQB / C-JPQD series from MISUMI.
  - Standard type with spherical head. Rod diameter tolerance that can be specified for the press-fit part and lead-in part: m6, p6.
  - The mounting method is press-fit type, which is simple and convenient.
  - Optional Material: Iron (SKS3); Stainless Steel (SUS304, SUS440C), suitable for positioning of a variety of workpieces.
  - SUS304 Material, effectively ensuring anti-rust.
  - The lead-in part of the sphere can make the workpiece lead in by sliding sideways, without damage.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 2.64-
  Days to Ship:	Same day or more

• 

  MiSUMi Economy

  Locating Pin - Straight, Configurable[RoHS Comliant]

  MISUMI

  RoHS10 compliant.
  Straight Type Locating Pins with the diameter configurable in 0.01 mm increments.
  * Minimum order quantity is set. The minimum order quantity may differ depending on the type and size. Please check details in the Part Number tab or WOS (Web Order System).

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

• • On Sale Till 31/03/2025

  

  Small Diameter Locating Pin - Straight / Small Head

  MISUMI

  - Small Diameter Locating Pin - Straight / Small Head from MISUMI.
  - Insertion Guide Tip Type can be selected into 4 types, Tapered tip, Taper R tip, Spherical tip, and Flat tip.
  - The material of locating pin can be selected 5 types, Steel SKD61, Steel SK95(SK4), Stainless Steel SUS304, Stainless Steel SUS304 Equivalent, Stainless Steel SUS440C or 13Cr.
  - The outer diameter of the locating pin can be configurable up to 3 mm.
  - SUS304 may not be polished.
  

  • Volume Discount

  CAD ：

  2D / 3D

  	Special Price
  Days to Ship:	Same day or more

• 

  MiSUMi Economy

  Locating Pins Large Head, Spherical, Threaded

  MISUMI

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s)

• 

  MiSUMi Economy

  Locating Pins Straight, Sphere, Tapped

  MISUMI

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s)

• 

  Locating Pins - Straight, Sphere (Tapped)

  MISUMI

  - Locating Pins - Straight, Sphere (Tapped) from MISUMI.
  - The sphere head can prevent the mating side from being scratched. Selectable tolerance with each dimension configurable.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - When the D dimension is small, a centering hole will cause the sphere section to become small.
  - On some combination of dimensions, the center hole may not be available.
  - Polishing and centering hole is sometimes not available for SUS304.
  

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Locating Pins - Plastic, Small Diameter

  MISUMI

  - Locating Pins - Plastic, Small Diameter from MISUMI.
  - Having a metal core, it is less prone to be broken when used for side locating.
  - The outer diameter tolerance is the result of measurement at room temperature.
  - Core Rod material of locating pin is made of SUS304.
  - There is a flat part of Ø0.2 or below at the tip of Straight Type, Spherical Type and Small Head Type.
  - MC nylon of flat tip type is not available.
  

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

• 

  Small Diameter Locating Pins - High Hardness Stainless Steel - Solid

  MISUMI

  - Small Diameter Locating Pins - High Hardness Stainless Steel – Solid from MISUMI.
  - Locating Pins for Micromachining less than Ø3. Corrosion-resistant and rigid. Suitable for locating Base, etc.
  - The tip shape is selectable from four types, Flat (SF), Sphere (SP), Taper (ST), or Tapered (SX).
  - Chamfering or tolerance changing of mounting portion is available as alteration.
  - Note that High Hardness Stainless Steel contains Mn and dissolves by acid.
  - High Hardness Stainless Steel is weakly magnetic.
  

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

• • On Sale Till 31/03/2025

  

  Locating Pins - Sphere Large Head (Press Fit)

  MISUMI

  - Locating Pins - Sphere Large Head (Press Fit) from MISUMI.
  - The Sphere Head can prevent the mating material from being scratched even when you insert by sliding horizontally against the pin end.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polished, centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Insertion guide tip shape can be selected 2 types, round, and diamond.
  

  • Volume Discount

  CAD ：

  2D / 3D

  	Special Price
  Days to Ship:	Same day or more

• 

  Locating Pins - Plastic, Large Head - Press Fit

  MISUMI

  - Locating Pins - Plastic, Large Head - Press Fit from MISUMI.
  - Plastic Locating Pins which prevent workpiece damage.
  - Insertion guide tip type can be selected 3 types, Tapered, Flat and Spherical.
  - The outer diameter tolerance is the result of measurement at room temperature.
  - The material of locating pin can be selected 4 types, Polyacetal (Black), MC Nylon (Blue), Conductive MC Nylon CDR2 (Black), or PEEK (Natural Ivory).
  - The mounting method is press fit, with m6 tolerance.
  

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Locating Pins - Straight, Sphere (Press Fit)

  MISUMI

  - Locating Pins - Straight, Sphere (Press Fit) from MISUMI.
  - The sphere head can prevent the mating side from being scratched. Selectable tolerance with each dimension configurable.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - When the D dimension is small, a centering hole will cause the sphere section to become small.
  - On some combination of dimensions, the center hole may not be available.
  - Polishing and centering hole is sometimes not available for SUS304.
  

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Locating Pin High Hardness Stainless Small Head Spherical -Press Fit-

  MISUMI

  For High Hardness Stainless Steel Sphere Small Head, the configurable range of dimensions has been further widened and the number of available alterations has been increased. For orders of up to 1,000 pcs., 7th day shipping is available.

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

• 

  Small Diameter Locating Pins - High Hardness Stainless Steel - Small Head

  MISUMI

  "High accuracy positioning is available, because the O.D. can be configured in 0.01mm increment on either of the mounting side or the locating side."

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

• 

  Small Diameter Locating Pin - with Shoulder Seat

  MISUMI

  - Small Diameter Locating Pin - with Shoulder Seat from MISUMI.
  - Insertion Guide Tip Type can be selected into 4 types, Tapered tip, Spherical tip, and Flat tip.
  - The outer diameter of the locating pin can be configurable from 1.0 to 3.5 mm.
  - The shoulder part is provided to prevent pin extraction.
  - The overall length of the product can be configurable from 13.0 mm to 30.0 mm.
  - The material of locating pin is made of Stainless Steel SUS304.
  

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Locating Pins - High Hardness Stainless Steel Sphere Large Head (Threaded)

  MISUMI

  - Locating Pins - High Hardness Stainless Steel Sphere Large Head (Threaded) from MISUMI.
  - Sphere Large Head with each dimension configurable. We reduced the price drastically compared to the conventional products.
  - If the diameter exceeds Ø10, core hardness may be 30HRC~.
  - For Tightening Torque (Reference Value), Tightening Torque Strength Class (10.9). Not applicable when using Locking Agents or Spring Washers.
  - The material of this locating pin is made of High hardness stainless steel with a hardness level at 35HRC~.
  

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

• 

  Small Diameter Locating Pin - Small Head / Press Fit

  MISUMI

  - Small Diameter Locating Pin - Small Head / Press Fit from MISUMI.
  - Insertion Guide Tip Type can be selected 4 types, Tapered, Taper R, Spherical and Flat.
  - Material code SG and DG are applicable to L configurable type of sphere only.
  - L selectable type is applicable to spherical tip type only.
  - SUS304 may not be polished.
  - Chamfering of mounting portion and change of tolerance are available as alterations.
  - Shaft diameter can be configured up to 3 mm.
  

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  [Clean & Pack] Small Diameter Locating Pin - Straight

  MISUMI

  Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
  This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

  ■Part Number for Clean & Pack Products

  ·Degreasing (Anti-rust single packing)	: Part Number SL-□□
  ·Precision cleaning (Degassing double packing)	: Part Number SH-□□
  ·Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

  Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
  SL-□□	Degreasing	Anti-rust packing	Oil removal	General environment	Regular assembly process
  					Post battery assembly process
  SH-□□	Precision cleaning	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
  					LCD-related post assembly process
  					In-vehicle camera assembly process
  SHD-□□	Electrolytic polishing + precision cleaning	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
  					Liquid crystal deposition process
  					Pre-OLED process

  ■Notes
  Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
  Please be careful about the application location and storage environment.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	7 Day(s) or more

• 

  MiSUMi Economy

  Locating Pins Large Head, Spherical, Tapped

  MISUMI

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s)

• • On Sale Till 31/03/2025

  

  Locating Pins - Sphere Small Head (Press Fit)

  MISUMI

  - Locating Pins - Sphere Small Head (Press Fit) from MISUMI.
  - The Sphere Head can prevent the mating material from being scratched even when you insert by sliding horizontally against the pin end.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polished, centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Insertion guide tip shape can be selected 2 types, round, and diamond.
  

  • Volume Discount

  CAD ：

  2D / 3D

  	Special Price
  Days to Ship:	Same day or more

• 

  Small Diameter Locating Pin - Shouldered, Threaded

  MISUMI

  - Small Diameter Locating Pin - Shouldered, Threaded from MISUMI.
  - Insertion Guide Tip Type can be selected 4 types, Tapered, Taper R, Spherical and Flat.
  - The material of pin can be selected 2 types, SK95 (SK4) Equivalent and SUS304.
  - The hardness of steel pin is 50～58HRC.
  - SUS304 may not be polished.
  - When L=0, an undercut will be added at the neck of the thread.
  - Shaft diameter can be selected up to 4 mm.
  

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Press Fit

  MISUMI

  - Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Press Fit from MISUMI.
  - Sphere Large Head with each dimension configurable. The tolerances on both ends are also configurable.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Hard Chrome Plating and buff finished products are not available in Precision Grade Tolerance.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Polishing and centering hole is sometimes not available for SUS304.
  - When the P dimension is small, a centering hole will cause the sphere section to become small.
  

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Locating Pins for Height Adjusting - Large Head Threaded

  MISUMI

  Locating pins for printed circuit boards. B dimension is fixed short for thin boards. Reasonably priced.

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s)

• 

  MiSUMi Economy

  Locating Pins Large Head, Spherical, Press Fit, Standard

  MISUMI

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s)

• 

  Pusher Pins - Straight

  MISUMI

  - Pusher Pins – Straight from MISUMI.
  - Insertion Guide Tip Type can be selected 4 types, Tapered, Taper R, Spherical and Flat.
  - The material of pin can be selected 3 types, Conductive MC Nylon CDR2 (Black), PEEK (Natural Ivory), Polyacetal (White).
  - The outer diameter of pin can be selected 7 sizes, 6, 8, 10, 12, 15, 20 and 25 mm.
  - The mounting thread length is M x 2. (When L<20, the mounting thread length is M x 1.5).
  

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Locating Pins - High Hardness Stainless Steel, Straight (Tapped)

  MISUMI

  - Locating Pins - High Hardness Stainless Steel, straight (Tapped) from MISUMI.
  - The sphere head can prevent the mating side from being scratched. Selectable tolerance with each dimension configurable.
  - The tightening torque (ref. value) for hardened products is strength class 10.9. Not applicable when using locking materials or lock washers.
  - For tapped type, unless described otherwise on the drawing, the spec. design is the same as for Press Fit Type. For D Tolerance g6, h7, no Insertion guide is provided. (ℓ1)
  

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

• 

  MiSUMi Economy

  Locating Pins Small Head, Spherical, Press Fit, Standard

  MISUMI

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s)

• 

  Locating Pins - Sphere Large Head (Threaded)

  MISUMI

  - Locating Pins - Sphere Large Head (Threaded) from MISUMI.
  - Sphere Large Head, Threaded + Lock Nut Type. Improved maintainability compared to Press Fit Type.
  - Polished, Centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
  - Provided 3 options of alteration, Sphere tip (RC), Wrench Hole Machining (LAC), or Wrench Flats (SC).
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Small Diameter Locating Pin - Shouldered, Press Fit

  MISUMI

  - Small Diameter Locating Pin - Shouldered, Press Fit from MISUMI.
  - Insertion Guide Tip Type can be selected into 4 types, Tapered tip, Taper R tip, Spherical tip, and Flat tip.
  - The material of locating pin can be selected 2 types, Steel SK95(SK4) Equivalent, Stainless Steel SUS304.
  - SUS304 may not be polished.
  - The hardness level of SK95 (SK4) Equivalent is 50～58HRC.
  - The outer diameter of the locating pin can be selectable up to 4 mm.
  

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Locating Pins - Plastic, Small Head

  MISUMI

  - Locating Pins - Plastic, Small Head from MISUMI.
  - A Small Head Plastic Locating Pins which prevent workpiece damages.
  - Insertion guide tip type can be selected 3 types, Tapered, Flat and Spherical.
  - The outer diameter tolerance is the result of measurement at room temperature.
  - The material of locating pin can be selected 4 types, Polyacetal (Black), MC Nylon (Blue), Conductive MC Nylon CDR2 (Black), or PEEK (Natural Ivory).
  - The mounting method is press fit, with m6 tolerance.
  

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

• 

  Pusher Pins - Small Head

  MISUMI

  A Small Head Plastic Pin used as the Workpiece Holder.

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

• 

  Small Diameter Plunging Locating Pins

  MISUMI

  [Features]Small diameter pin unit in which the spring-retaining pin performs strokes.

  CAD ：

  2D / 3D

  Days to Ship:	8 Day(s) or more

• 

  Locating Pins - Plastic, Large Head - Tapped

  MISUMI

  Plastic Locating Pins which prevent workpiece damages.

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

• 

  MiSUMi Economy

  Locating Pins Small Head, Spherical, Tapped

  MISUMI

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s)

• 

  Locating Pins - High Hardness Stainless Steel Sphere Large Head (Press Fit)

  MISUMI

  - Locating Pins - High Hardness Stainless Steel Sphere Large Head (Press Fit) from MISUMI.
  - Sphere Large Head with each dimension configurable. We reduced the price drastically compared to the conventional products.
  - The material of this locating pin is made of High hardness stainless steel with a hardness level at 35HRC~.
  - If the diameter exceeds Ø10, core hardness may be 30HRC~.
  - For high hardness stainless steel sphere large head type, the configurable range of dimensions has been further widened.
  

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

• 

  Locating Pins - High Hardness Stainless Steel, Straight (Press Fit)

  MISUMI

  - Locating Pins - High Hardness Stainless Steel, straight (Press Fit) from MISUMI.
  - A straight positioning pin made of high hardness stainless steel.
  - Insertion Guide Tip Type can be selected into 3 types, Tapered, Tapered R or Spherical.
  - Tapped type locating pin provided tapped thread for disassembled.
  - For tapped type, unless described otherwise on the drawing, the spec, design is the same as for Press fit type.
  - The tightening torque (ref. value) is tightening torque strength class 10.9. Not applicable when using locking materials or lock washers.
  

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

• 

  Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Threaded

  MISUMI

  - Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable – Threaded from MISUMI.
  - Sphere Large Head with each dimension configurable. The tolerances on both ends are also configurable.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Hard Chrome Plating and buff finished products are not available in Precision Grade Tolerance.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Polishing and centering hole is sometimes not available for SUS304.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Locating Pins - Sphere Large/Small Head (Set Screw-Set Screw Flat Shape)

  MISUMI

  Large Head/Small Head, Tapered, Set Screw Type. Selectable from Circumference Groove, Notched and Set Screw Flat Shapes.

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Locating Pins - Sphere Large Head (Tapped)

  MISUMI

  - Locating Pins - Sphere Large Head (Tapped) from MISUMI.
  - Sphere Large Head with the shape designed to be mounted from back using bolts. Improved maintainability compared to Press Fit Type.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polished, centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - The spherical head may be polished.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Locating Pins - Sphere Small Head (Tapped)

  MISUMI

  - Locating Pins - Sphere Small Head (Tapped) from MISUMI.
  - Sphere Small Head with the shape designed to be mounted from back using bolts. Improved maintainability compared to Press Fit Type.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polished, centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - The spherical head may be polished.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Detection Pins for Weld Nuts

  MISUMI

  Weld nut detection pin. Please use it together with the workpiece detection unit (PCPNA).

  CAD ：

  2D / 3D

  Days to Ship:	7 Day(s)

• 

  Locating Pins - High Hardness Stainless Steel Sphere Large Head (Tapped)

  MISUMI

  Sphere Large Head with each dimension configurable. We reduced the price drastically compared to the conventional products.

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

• 

  Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Tapped

  MISUMI

  - Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable – Tapped from MISUMI.
  - Sphere Large Head with each dimension configurable. The tolerances on both ends are also configurable.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Hard Chrome Plating and buff finished products are not available in Precision Grade Tolerance.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Polishing and centering hole is sometimes not available for SUS304.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Locating Pins for Height Adjusting - Large Head Press Fit

  MISUMI

  Locating pins for printed circuit boards. B dimension is fixed short for thin boards. Reasonably priced.

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s)

• 

  Locating Pins for Height Adjusting - Small Head Press Fit

  MISUMI

  Locating pins for printed circuit boards. B dimension is fixed short for thin boards. Reasonably priced.

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s)

• 

  Locating Pins for Height Adjusting - Small Head Tapped

  MISUMI

  Locating pins for printed circuit boards. B dimension is fixed short for thin boards. Reasonably priced.

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s)

Loading...