Lamp Fixtures for Inspection（Irradiation Direction：Oblique Ray）

• 

  Infrared Lighting Infrared Series

  IMAC

  Infrared light ideal for transmission type inspection of packages, liquids, printing, etc.
  [Features]
  · Adopts a wavelength peak of 850 nm, 950 nm, 1,200 nm or 1,450 nm.
  · Can be used for inspections that cannot be performed using visible light.
  · High transmittance infrared light is optimal for inspections where liquid is permeated or printed patterns are erased.
  [Applications]
  · Ideal for detecting foreign objects in liquid.
  · Convenient for visual inspection and character recognition after erasing patterns from the work surface.
  · Ideal for non-contact spectroscopic analysis and sugar concentration measurement, etc.

  CAD ：

  2D / 3D

  Standard Price:	SGD 737.45-
  Days to Ship:	18 Day(s) or more

• 

  Direct Ring Light (Direct Light) IDR Series

  IMAC

  This general-purpose ring light supports a diverse range of visual inspections.
  [Features]
  · A high concentration of shell type LEDs is mounted, and light can be effectively focused on the center by the angle of the circuit board.
  · The tilt is ideal for inspecting for scratches, edges, and alignment markings.
  · The lineup contains various sizes, from standard outer diameters of 32 mm / internal diameter 10 mm to external diameter 140 mm/ internal diameter 95 mm.
  · Light color: Can be selected from white / red / blue / green.
  [Applications]
  · Optimized for character recognition and 2D code reading.
  · Convenient for mounting substrate parts inspection and alignment mark reading.

  CAD ：

  2D / 3D

  Standard Price:	SGD 297.24-
  Days to Ship:	8 Day(s) or more

• 

  LED Lamps- Multi Lightings

  MISUMI

  LED lighting has a longer lifespan than traditional halogen and fluorescent lights. Maintenance frequency can be reduced.

  CAD ：

  2D / 3D

  Standard Price:	SGD 572.78-
  Days to Ship:	9 Day(s) or more

• 

  LED Lamps- Lightings / Direct Ring

  MISUMI

  LED light has a longer lifespan than conventional halogen and fluorescent lamps. Maintenance frequency can be reduced.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 673.85-
  Days to Ship:	4 Day(s) or more

• 

  OPTEX FA Direct Bar Lighting, OPDB Series

  OPTEX FA

  It can widely be used as oblique lighting and backlight.
  [Features]
  ・ It can be selected from a lineup of 6 sizes depending on the illuminated area
  ・ Free mounting position with movable nuts
  ・ Since it has movable nuts, it is easy to adjust with the mounting jig.
  ・ It achieves high levels of illuminance, even when illuminating over long distances.
  ・ Adjusting the installation angle makes it illuminate from the optimum position
  ・ It can be installed freely, supporting various applications
  ・ It can be used as high-luminance surface lighting with a diffuser plate attached

  CAD ：

  2D

  Standard Price:	SGD 226.42-
  Days to Ship:	20 Day(s) or more

• 

  Low Angle Direct Ring Lighting OPDR-LA Series

  OPTEX FA

  Low angle ring lighting ideal for edge extraction and scratch inspection on glossy surfaces.
  
  [Features]
  · Lighting that makes out surface scratches and similar defects and features by illuminating the workpiece from a shallow angle (in respect to the workpiece).
  · Makes out any differences in the scatter rate by illuminating the target object from an angle and controlling the generation of any ghosting/unwanted reflections.

  CAD ：

  2D

  Standard Price:	SGD 329.12-
  Days to Ship:	20 Day(s) or more

• 

  Low Angle Ring Light (Direct Light) IDR-LA Series

  IMAC

  General purpose ring lighting ideal for scratch inspection/edge detection by illuminating from a low angle.
  [Features]
  · Mounted on direct ring lighting at an angle.
  · Ideal for edge detection and scratch inspection with oblique irradiation.
  · The lineup contains various sizes, from standard outer diameters of 40 mm / internal diameter 15 mm to external diameter 200 mm/ internal diameter 170 mm.
  · Light color: Can be selected from white / red / blue / green.
  [Applications]
  · Ideal for inspecting tablets or powder for foreign matter and scratches or dirt.
  · Useful for reading engraved text on metal surfaces or substrate and sheet edge extraction.

  CAD ：

  2D / 3D

  Standard Price:	SGD 326.61-
  Days to Ship:	8 Day(s) or more

• 

  Horizontal Opposed Ring Light (Direct Light) IDRA-T Series

  IMAC

  General-purpose ring lighting that can emphasize irregularities by irradiation in the horizontal direction.
  [Features]
  · Shell type LEDs are mounted horizontally.
  · Ideal for edge detection and minute scratch inspection using horizontal irradiation.
  · The lineup contains various sizes, from standard outer diameters of 78 mm / internal diameter 46 mm to external diameter 206 mm/ internal diameter 170 mm.
  · Light color: Can be selected from white / red / blue / green.
  [Applications]
  · Ideal for inspecting tablets or powder for foreign matter and fine scratches or dirt.
  · Useful for reading engraved text on metal surfaces.
  · Optimal for circuit board and sheet edge extraction.

  CAD ：

  2D / 3D

  Standard Price:	SGD 737.60-
  Days to Ship:	13 Day(s) or more

• 

  UV Illumination UV-CAN Series

  IMAC

  405 nm, 375 nm, 365 nm ultraviolet lighting.
  Enables inspections clearer than those using visible light. Output 2 times that of the conventional model.

  CAD ：

  2D / 3D

  Standard Price:	SGD 1,881.82-
  Days to Ship:	18 Day(s) or more

• 

  Direct Ring Light MDRL Series

  MORITEX

  [Features]
  · High-illuminance LEDs are densely arranged so that illumination from all directions in 360° produces uniform shadowless illumination.
  · Standard type LED lighting fixture that can be used for a wide range of applications.
  · Choose a model that matches the manufacturer lens.

  Standard Price:	SGD 789.10
  Days to Ship:	63 Day(s) or more

• 

  Horizontal Direct Ring Lighting OPDR-H Series

  OPTEX FA

  Direct ring lighting that can emphasize uneven areas by illuminating from the horizontal direction.
  
  [Features]
  · Lighting that makes out surface scratches and similar defects and features by illuminating the workpiece from a shallow angle (in respect to the workpiece).
  · Makes out any differences in the scatter rate by illuminating the target object from an angle and controlling the generation of any ghosting/unwanted reflections.

  CAD ：

  2D

  Standard Price:	SGD 739.92-
  Days to Ship:	20 Day(s) or more

• 

  Direct Ring Lighting OPDR Series

  OPTEX FA

  It produces high-luminance levels by condensing light in the central part.
  [Features]
  ・ It achieves high-luminance illuminate by condensing light on a fixed distance to the workpiece
  ・ Uniformity is high because light is condensed from the outer perimeter of the ring
  ・ It is possible to illuminate over a wide range according to the size of the lighting.
  ・ It is effective for capturing by differences in reflectance of workpiece

  CAD ：

  2D

  Standard Price:	SGD 326.59-
  Days to Ship:	20 Day(s) or more

• 

  LED Lighting Series Spot Lighting PDS Series

  KONDO SEISAKUSHO

  Ideal for saving space measures.
  
  [Features]
  · Suitable for restricted inspection spaces
  · Where lighting equipment could not previously fit.

  CAD ：

  2D

  Days to Ship:	48 Day(s) or more

• 

  Sensing LED Ring Lighting OPR Series

  OPTEX FA

  To lighting that self-controls brightness.
  [Features]
  ・ [FALUX sensing]Brightness monitoring and feedback control possible by mounting
  ・ By adopting attachment lens, irradiation angle can be switched to 3 modes
  ・ Improves the uniformity of illuminance distribution while increasing the specific light intensity 2 to 3 times

  CAD ：

  2D / 3D

  Standard Price:	SGD 502.87-
  Days to Ship:	6 Day(s) or more

• 

  Sensing Bar Lighting OPB-S Series

  OPTEX FA

  Bar lighting is three times brighter than conventional models and is equipped with a sensing function.
  
  [Features]
  · Provides luminance monitoring via the built-in sensor and long term stability via feedback.
  · Equipped with FALUX sensing.
  · The built-in photodiodes sense the luminance of the LED lighting.
  · Accurately measures the emitted luminance not just during continuous lighting conditions, but also under conditions where the light infrequently flashes on and off.
  · Furthermore, as well as the luminance of the emitted light, the internal temperature is also measured in the lighting itself, which can then be monitored on the power supply side.
  · Feedback control based off these monitored values is also possible using the OPPF series controller.
  · The absolute luminance makes adjusting for instrumentation errors for multiple light units easy.
  · The luminance at the time of shipping from the factory and the absolute luminance unique to the model are stored in the internal memory. The values can be referenced from the OPPF series.
  · With this, in addition to being able to monitor any changes in the luminosity values, adjusting for errors in the instrumentation for multiple lighting units is made easier by being able to compare the values with the absolute luminance value.
  · Inherits the performance of the popular OPB series.
  · Only 3.5 mm taller, even with the sensor built-in.
  · Corrections of fluctuations in brightness due to the FALUX and the excellent optical characteristics can be used as is.

  CAD ：

  2D / 3D

  Standard Price:	SGD 798.62-
  Days to Ship:	6 Day(s) or more

• 

  Square Surface Lighting (Indirect Light) IPQC Series

  IMAC

  Indirect lighting fixture with a low angle that illuminates from 4 directions.
  Uses high-power LEDs for at least 10 times as much light as conventional products. Ideal for engraving/edge extraction of square workpieces.

  CAD ：

  2D / 3D

  Standard Price:	SGD 1,163.02-
  Days to Ship:	8 Day(s) or more

• 

  Shadowless Ring Illumination (Indirect Light) IFR Series

  IMAC

  Diffusion-type ring lighting that uniformly irradiates glossy and uneven workpieces.
  [Features]
  · Adopts an optical guide plate for indirect lighting where direct LED light is not visible.
  · Light is emitted from the optical guide plate to reduce LED glare and limit halation.
  [Applications]
  · Character recognition, 2D code reading.
  · For mounting substrate parts inspection.
  · Character inspection on gloss paper.

  CAD ：

  2D / 3D

  Standard Price:	SGD 1,002.10-
  Days to Ship:	18 Day(s) or more

• 

  Shadowless Low-Angle Ring Illumination (Indirect Light) IPR Series

  IMAC

  Diffusion-type low angle ring lighting that uniformly irradiates glossy and uneven workpieces.
  [Features]
  · Adopts an optical guide plate to keep direct LED light from being visible.
  · Uniformly irradiates glossy and uneven workpieces.
  · Light is emitted from the optical guide plate to reduce LED glare and limit halation.
  [Applications]
  · Ideal for edge chipping / crack inspection of spouts, etc., character recognition and 2D code reading.
  · Convenient for mounting substrate parts inspection and character inspection on gloss paper.

  CAD ：

  2D / 3D

  Standard Price:	SGD 2,777.43
  Days to Ship:	18 Day(s) or more

• 

  Highly Uniform Multi Ring Lighting VRMD Series

  SHIMATEC

  Universal ring lighting which can easily provide the ideal image just by changing the lighting height.
  [Features]
  · The original design of the diffusion plate delivers uniform wide-angle illumination.
  · Dust can be cleaned away easily at any time as the diffusion plate covers the entire light emission section.
  · The diffusion plate also comes with a protective cover for resistance to external impact, minimizing damage caused during accidents, etc.
  · Separate supported power supply controller VS-24 series and extension cable required.
  [Applications]
  · Ideal for all types of image processing, LCD alignment, and PCB alignment inspections.
  · Ideal for inspections of chip components, electronic components, and food cup inner surfaces.
  · Perfect for cleanrooms in semiconductor factories or food processing factories.

  CAD ：

  2D

  Standard Price:	SGD 423.89-
  Days to Ship:	13 Day(s) or more

• 

  High Luminance Multi Ring Lighting VRMD UP Series

  SHIMATEC

  High brightness type universal ring lighting which can easily provide the ideal image just by changing the lighting height.
  [Features]
  · Effects of the translucent diffuser plate enable brightness to be concentrated on a smaller area than the standard type.
  · Dust can be cleaned away easily at any time as the diffusion plate covers the entire light emission section.
  · The diffusion plate also comes with a protective cover for resistance to external impact, minimizing damage caused during accidents, etc.
  · Separate supported power supply controller VS-24 series and extension cable required.
  [Applications]
  · Ideal for all types of image processing, LCD alignment, and PCB alignment inspections.
  · Ideal for inspections of chip components, electronic components, and food cup inner surfaces.
  · Perfect for cleanrooms in semiconductor factories or food processing factories.

  CAD ：

  2D

  Standard Price:	SGD 423.89-
  Days to Ship:	13 Day(s) or more

• 

  Highly Uniform Dome Lighting VDSD Series

  SHIMATEC

  Dome lighting with excellent uniformity and brightness.
  [Features]
  · Uniform and very high brightness.
  · In addition to the illumination of the dome, it can irradiate diffused light from the side.
  · More uniform irradiation is possible through a combination of two types of lights.
  · The edge direction and the upward direction can be dimmed and lit independently.
  · Separate supported power supply controller VS-24 series and extension cable required.
  [Applications]
  · Ideal for inspection of uneven products and foreign matter inspections of food packages, containers, etc.

  Standard Price:	SGD 1,002.36-
  Days to Ship:	13 Day(s) or more

• 

  Direct Lighting Direct Irradiation Type DR Series

  NISSIN ELECTRO

  LEDs are arranged on a ring, illuminating toward the center. Light from the element lights the target object directly.
  Each LED element emits light with a divergent angle to brightly and uniformly illuminate surfaces.
  
  [Applications] Inspection of various characters, printed surface contamination/scratch inspection, measurement inspection, etc.

  Standard Price:	SGD 3,085.45
  Days to Ship:	12 Day(s) or more

• 

  Direct Lighting Low-Angling DR-LA Series

  NISSIN ELECTRO

  By placing illumination at a low position and lighting from diagonally above, a vivid image with emphasized outlines and edges of workpieces can be obtained. LEDs are arranged in a ring shape that is closer to the vertical, illuminating toward the center.
  
  [Applications] Detection of various edges, inspection of engraved/scratched metal surfaces, printed surface contamination/scratch inspection, etc.

  Standard Price:	SGD 1,796.56-
  Days to Ship:	17 Day(s) or more

• 

  Direct Lighting Square Oblique Irradiation Type DL-S Series

  NISSIN ELECTRO

  Lighting containing bar type fixtures arranged into a square on the same base. The 4 lights are completely independent.
  Illumination angle, dimming, and on/off illumination controls support free settings in 4 directions. Mounting of diffusion plate and polarizing plate is possible.
  
  [Applications] Inspection for various foreign matter, reading of various characters and codes, for square and rectangular shapes, etc.

  Standard Price:	SGD 2,165.92
  Days to Ship:	12 Day(s) or more

• 

  Direct Ring Lighting FL-DR Series

  OMRON

  One of the highest luminosities in the industry* / Clear images with wide-field lighting.
  
  [Features]
  · Small yet high-luminosity ODR illumination
  · Broad range of workpiece distances supported

  CAD ：

  2D / 3D

  Standard Price:	SGD 960.54-
  Days to Ship:	11 Day(s) or more

• 

  Direct Ring Lighting UDR Series

  U-TECHNOLOGY

  [Features]
  ・ Lighting suitable for inspection of various purposes.
  ・ High luminance can be obtained by direct illumination.
  ・ Lighting that can be easily installed and adjusted by illuminating from the 360° direction.
  ・ The light quality can be changed by using a diffuser plate and a polarizing plate.
  [Applications]
  ・ Board inspection.
  ・ Scratch inspection.
  ・ Surface inspection.
  ・ Dirt inspection.

  Standard Price:	SGD 1,804.80
  Days to Ship:	10 Day(s) or more

• 

  Dedicated Light Units For Image Processing [FLV]

  OMRON

  A wide range of lineup consists of light units such as ring light, bar light, spot light, etc.

  CAD ：

  2D / 3D

  Standard Price:	SGD 829.32-
  Days to Ship:	7 Day(s) or more

Loading...