Lamp Fixtures for Inspection（Power Consumption (Range)：6.1~8）

• 

  Bar Lighting (Direct Light / Diffused Light) IDBA Series

  IMAC

  General purpose bar lighting.
  It can be used widely, including oblique irradiation and transmission applications.

  CAD ：

  2D / 3D

  Standard Price:	SGD 737.85
  Days to Ship:	18 Day(s) or more

• 

  Direct Ring Light (Direct Light) IDR Series

  IMAC

  This general-purpose ring light supports a diverse range of visual inspections.
  [Features]
  · A high concentration of shell type LEDs is mounted, and light can be effectively focused on the center by the angle of the circuit board.
  · The tilt is ideal for inspecting for scratches, edges, and alignment markings.
  · The lineup contains various sizes, from standard outer diameters of 32 mm / internal diameter 10 mm to external diameter 140 mm/ internal diameter 95 mm.
  · Light color: Can be selected from white / red / blue / green.
  [Applications]
  · Optimized for character recognition and 2D code reading.
  · Convenient for mounting substrate parts inspection and alignment mark reading.

  CAD ：

  2D / 3D

  Standard Price:	SGD 972.54-
  Days to Ship:	8 Day(s) or more

• 

  OPTEX FA Direct Bar Lighting, OPDB Series

  OPTEX FA

  It can widely be used as oblique lighting and backlight.
  [Features]
  ・ It can be selected from a lineup of 6 sizes depending on the illuminated area
  ・ Free mounting position with movable nuts
  ・ Since it has movable nuts, it is easy to adjust with the mounting jig.
  ・ It achieves high levels of illuminance, even when illuminating over long distances.
  ・ Adjusting the installation angle makes it illuminate from the optimum position
  ・ It can be installed freely, supporting various applications
  ・ It can be used as high-luminance surface lighting with a diffuser plate attached

  CAD ：

  2D

  Standard Price:	SGD 827.96
  Days to Ship:	20 Day(s) or more

• 

  Flat Direct Ring Lighting (Direct Light) IDR-F Series

  IMAC

  Lightweight flat-ring lighting that has shell type LEDs mounted horizontally to provide illumination over a wide range.
  [Features]
  · The flat illuminating surface enables illumination over a wide area.
  · Uses a POM case, with a ring with an O.D. of 90 mm and a weight of 85 g. Features a lightweight design that makes it ideal for being moved around as well.
  · Ultra-slim light is also available for dedicated use with the 16 mm diameter telecentric lens (LWD 40, 65).
  · Usable with auxiliary light of a coaxial spotlight source.
  · Light color: Can be selected from white / red / blue / green.
  [Applications]
  · Ideal for positioning, visual inspection, and character recognition when mounted on the end of robot arms.
  · Convenient for two-dimensional code reading, mounting substrate parts inspection, and alignment mark reading.

  CAD ：

  2D / 3D

  Standard Price:	SGD 664.22-
  Days to Ship:	13 Day(s) or more

• 

  Low Angle Ring Light (Direct Light) IDR-LA Series

  IMAC

  General purpose ring lighting ideal for scratch inspection/edge detection by illuminating from a low angle.
  [Features]
  · Mounted on direct ring lighting at an angle.
  · Ideal for edge detection and scratch inspection with oblique irradiation.
  · The lineup contains various sizes, from standard outer diameters of 40 mm / internal diameter 15 mm to external diameter 200 mm/ internal diameter 170 mm.
  · Light color: Can be selected from white / red / blue / green.
  [Applications]
  · Ideal for inspecting tablets or powder for foreign matter and scratches or dirt.
  · Useful for reading engraved text on metal surfaces or substrate and sheet edge extraction.

  CAD ：

  2D / 3D

  Standard Price:	SGD 928.47-
  Days to Ship:	13 Day(s) or more

• 

  Chip LED Surface Illumination (Surface Emitting) IDHM Series

  IMAC

  Surface lighting with densely arranged chip LEDs.
  Backlight illumination achieves vivid silhouette images. Lineup in multiples of □30 mm. Can be selected to fit the image range.

  CAD ：

  2D / 3D

  Standard Price:	SGD 1,148.44
  Days to Ship:	13 Day(s) or more

• 

  LED Lamps- Lightings / Direct Ring

  MISUMI

  LED light has a longer lifespan than conventional halogen and fluorescent lamps. Maintenance frequency can be reduced.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 909.70
  Days to Ship:	4 Day(s) or more

• 

  Low Angle Direct Ring Lighting OPDR-LA Series

  OPTEX FA

  Low angle ring lighting ideal for edge extraction and scratch inspection on glossy surfaces.
  
  [Features]
  · Lighting that makes out surface scratches and similar defects and features by illuminating the workpiece from a shallow angle (in respect to the workpiece).
  · Makes out any differences in the scatter rate by illuminating the target object from an angle and controlling the generation of any ghosting/unwanted reflections.

  CAD ：

  2D

  Standard Price:	SGD 930.66-
  Days to Ship:	20 Day(s) or more

• 

  Sensing LED Ring Lighting OPR Series

  OPTEX FA

  To lighting that self-controls brightness.
  [Features]
  ・ [FALUX sensing]Brightness monitoring and feedback control possible by mounting
  ・ By adopting attachment lens, irradiation angle can be switched to 3 modes
  ・ Improves the uniformity of illuminance distribution while increasing the specific light intensity 2 to 3 times

  CAD ：

  2D / 3D

  Standard Price:	SGD 634.99-
  Days to Ship:	6 Day(s) or more

• 

  Shadowless Low-Angle Ring Illumination (Indirect Light) IPR Series

  IMAC

  Diffusion-type low angle ring lighting that uniformly irradiates glossy and uneven workpieces.
  [Features]
  · Adopts an optical guide plate to keep direct LED light from being visible.
  · Uniformly irradiates glossy and uneven workpieces.
  · Light is emitted from the optical guide plate to reduce LED glare and limit halation.
  [Applications]
  · Ideal for edge chipping / crack inspection of spouts, etc., character recognition and 2D code reading.
  · Convenient for mounting substrate parts inspection and character inspection on gloss paper.

  CAD ：

  2D / 3D

  Standard Price:	SGD 2,777.43
  Days to Ship:	18 Day(s) or more

• 

  Direct Ring Lighting OPDR Series

  OPTEX FA

  It produces high-luminance levels by condensing light in the central part.
  [Features]
  ・ It achieves high-luminance illuminate by condensing light on a fixed distance to the workpiece
  ・ Uniformity is high because light is condensed from the outer perimeter of the ring
  ・ It is possible to illuminate over a wide range according to the size of the lighting.
  ・ It is effective for capturing by differences in reflectance of workpiece

  CAD ：

  2D

  Standard Price:	SGD 1,354.02
  Days to Ship:	20 Day(s) or more

• 

  Surface Mounting Backlight OPSM Series

  OPTEX FA

  Thin and highly uniform high luminance backlight lighting in which chip LEDs are mounted in high densities.
  
  [Features]
  · Surface illumination from surface mounted chip LEDs. The light is made uniform by a diffuser plate.
  · Illuminates workpieces via the backlight. Used for determining shapes by their silhouette, etc.

  CAD ：

  2D

  Standard Price:	SGD 637.23-
  Days to Ship:	20 Day(s) or more

• 

  Flat Direct Ring Lighting OPDR-F Series

  OPTEX FA

  Direct ring lighting capable of illuminating a wide area.

  CAD ：

  2D

  Standard Price:	SGD 1,368.65-
  Days to Ship:	20 Day(s) or more

• 

  Sensing Bar Lighting OPB-S Series

  OPTEX FA

  Bar lighting is three times brighter than conventional models and is equipped with a sensing function.
  
  [Features]
  · Provides luminance monitoring via the built-in sensor and long term stability via feedback.
  · Equipped with FALUX sensing.
  · The built-in photodiodes sense the luminance of the LED lighting.
  · Accurately measures the emitted luminance not just during continuous lighting conditions, but also under conditions where the light infrequently flashes on and off.
  · Furthermore, as well as the luminance of the emitted light, the internal temperature is also measured in the lighting itself, which can then be monitored on the power supply side.
  · Feedback control based off these monitored values is also possible using the OPPF series controller.
  · The absolute luminance makes adjusting for instrumentation errors for multiple light units easy.
  · The luminance at the time of shipping from the factory and the absolute luminance unique to the model are stored in the internal memory. The values can be referenced from the OPPF series.
  · With this, in addition to being able to monitor any changes in the luminosity values, adjusting for errors in the instrumentation for multiple lighting units is made easier by being able to compare the values with the absolute luminance value.
  · Inherits the performance of the popular OPB series.
  · Only 3.5 mm taller, even with the sensor built-in.
  · Corrections of fluctuations in brightness due to the FALUX and the excellent optical characteristics can be used as is.

  CAD ：

  2D / 3D

  Standard Price:	SGD 798.62
  Days to Ship:	6 Day(s) or more

• 

  Square Surface Lighting (Indirect Light) IPQC Series

  IMAC

  Indirect lighting fixture with a low angle that illuminates from 4 directions.
  Uses high-power LEDs for at least 10 times as much light as conventional products. Ideal for engraving/edge extraction of square workpieces.

  CAD ：

  2D / 3D

  Standard Price:	SGD 1,251.21
  Days to Ship:	8 Day(s) or more

• 

  Shadowless Ring Illumination (Indirect Light) IFR Series

  IMAC

  Diffusion-type ring lighting that uniformly irradiates glossy and uneven workpieces.
  [Features]
  · Adopts an optical guide plate for indirect lighting where direct LED light is not visible.
  · Light is emitted from the optical guide plate to reduce LED glare and limit halation.
  [Applications]
  · Character recognition, 2D code reading.
  · For mounting substrate parts inspection.
  · Character inspection on gloss paper.

  CAD ：

  2D / 3D

  Standard Price:	SGD 1,853.63
  Days to Ship:	18 Day(s) or more

• 

  Slim Lighting Ring VRDFR Series

  SHIMATEC

  Thin, space-saving ring lighting fixture.
  [Features]
  · Thin, space-saving design.
  · Contains both coaxial and oblique lighting components to enable wide-range uniform lighting.
  · Provides extremely uniform irradiation thanks to its wide light emission area and diffusibility.
  · Separate supported power supply controller VS-24 series and extension cable required.
  [Applications]
  · Convenient for semiconductor electronic parts, circuit board inspection (exterior, alignment), text reading, tablet inspection, plastics, etc.

  CAD ：

  2D

  Standard Price:	SGD 2,289.47
  Days to Ship:	13 Day(s) or more

• 

  Highly Uniform Multi Ring Lighting VRMD Series

  SHIMATEC

  Universal ring lighting which can easily provide the ideal image just by changing the lighting height.
  [Features]
  · The original design of the diffusion plate delivers uniform wide-angle illumination.
  · Dust can be cleaned away easily at any time as the diffusion plate covers the entire light emission section.
  · The diffusion plate also comes with a protective cover for resistance to external impact, minimizing damage caused during accidents, etc.
  · Separate supported power supply controller VS-24 series and extension cable required.
  [Applications]
  · Ideal for all types of image processing, LCD alignment, and PCB alignment inspections.
  · Ideal for inspections of chip components, electronic components, and food cup inner surfaces.
  · Perfect for cleanrooms in semiconductor factories or food processing factories.

  CAD ：

  2D

  Standard Price:	SGD 1,407.29
  Days to Ship:	13 Day(s) or more

• 

  High Luminance Multi Ring Lighting VRMD UP Series

  SHIMATEC

  High brightness type universal ring lighting which can easily provide the ideal image just by changing the lighting height.
  [Features]
  · Effects of the translucent diffuser plate enable brightness to be concentrated on a smaller area than the standard type.
  · Dust can be cleaned away easily at any time as the diffusion plate covers the entire light emission section.
  · The diffusion plate also comes with a protective cover for resistance to external impact, minimizing damage caused during accidents, etc.
  · Separate supported power supply controller VS-24 series and extension cable required.
  [Applications]
  · Ideal for all types of image processing, LCD alignment, and PCB alignment inspections.
  · Ideal for inspections of chip components, electronic components, and food cup inner surfaces.
  · Perfect for cleanrooms in semiconductor factories or food processing factories.

  CAD ：

  2D

  Standard Price:	SGD 1,407.29
  Days to Ship:	13 Day(s) or more

• 

  Highly Uniform Dome Lighting VDSD Series

  SHIMATEC

  Dome lighting with excellent uniformity and brightness.
  [Features]
  · Uniform and very high brightness.
  · In addition to the illumination of the dome, it can irradiate diffused light from the side.
  · More uniform irradiation is possible through a combination of two types of lights.
  · The edge direction and the upward direction can be dimmed and lit independently.
  · Separate supported power supply controller VS-24 series and extension cable required.
  [Applications]
  · Ideal for inspection of uneven products and foreign matter inspections of food packages, containers, etc.

  Standard Price:	SGD 1,146.98-
  Days to Ship:	13 Day(s) or more

• 

  Low Cost Type Surface Emission (for Transmission) Light VDFK Series

  SHIMATEC

  Light-emitting fitting that supports a maximum illuminating surface of 300 x 200 mm.
  [Features]
  · Square surface lighting uses an optical guide plate.
  · Up to 300 x 200 mm light emitting surfaces can be provided at a reasonable cost.
  · Separate supported power supply controller VS-24 series and extension cable required.
  [Applications]
  · Ideal for all types of external inspections and dimensional measurements.
  · Ideal for permeation of large workpieces.
  · Can also be used for surface emission reflective lighting in addition to transmissive lighting.

  CAD ：

  2D

  Standard Price:	SGD 958.98
  Days to Ship:	13 Day(s) or more

• 

  VXHSL Series Coaxial Vertical Lighting

  SHIMATEC

  Small coaxial illumination equipment with excellent uniformity.
  [Features]
  · Light can be reflected off a flat workpiece by irradiation from the same axis as the camera to make the detected object stand out.
  · The lighting itself is compact but features a wide effective irradiation area.
  · Separate supported power supply controller VS-24 series and extension cable required.
  [Applications]
  · Ideal for all types of image processing, LCD alignment, PCB alignment, glass, metal, and wafer inspections.
  · Optimal for gloss on metals and glass and for mirror-surfaced workpieces.

  Standard Price:	SGD 1,711.00
  Days to Ship:	13 Day(s) or more

• 

  General Purpose Bar Illumination, VANSF Series

  SHIMATEC

  Universal bar lighting that combines well balanced brightness and uniformity.
  [Features]
  · Uniformity is improved further by mounting an optional diffusion plate.
  · Separate supported power supply controller VS-24 series and extension cable required.
  [Applications]
  · Useful for all types of image processing, LCD alignment, PCB alignment, and inspections of chip components and electronic components.

  CAD ：

  2D

  Standard Price:	SGD 872.20-
  Days to Ship:	13 Day(s) or more

• 

  Direct Lighting Horizontal Irradiation Type DR-UA Series

  NISSIN ELECTRO

  Horizontally illuminating ring type lighting fixture with LEDs facing wholly inside. Ultra-thin type with a width of only 10 mm.
  Can be used alone for lighting from diagonally above when illumination is placed at a low position, and also ideal as an indirect dome or auxiliary light source for coaxial episodic illumination.
  
  [Applications] Detection of various edges, inspection of engraved/scratched metal surfaces, printed surface contamination/auxiliary light for other lighting, etc.

  Standard Price:	SGD 2,770.76
  Days to Ship:	12 Day(s) or more

• 

  Dedicated Light Units For Image Processing [FLV]

  OMRON

  A wide range of lineup consists of light units such as ring light, bar light, spot light, etc.

  CAD ：

  2D / 3D

  Standard Price:	SGD 1,583.09-
  Days to Ship:	14 Day(s) or more

Loading...