Lamp Fixtures for Inspection（Power Consumption (Range)：10.1~20）

• 

  Bar Lighting (Direct Light / Diffused Light) IDBA Series

  IMAC

  General purpose bar lighting.
  It can be used widely, including oblique irradiation and transmission applications.

  CAD ：

  2D / 3D

  Standard Price:	SGD 826.17-
  Days to Ship:	18 Day(s) or more

• 

  Direct Ring Light (Direct Light) IDR Series

  IMAC

  This general-purpose ring light supports a diverse range of visual inspections.
  [Features]
  · A high concentration of shell type LEDs is mounted, and light can be effectively focused on the center by the angle of the circuit board.
  · The tilt is ideal for inspecting for scratches, edges, and alignment markings.
  · The lineup contains various sizes, from standard outer diameters of 32 mm / internal diameter 10 mm to external diameter 140 mm/ internal diameter 95 mm.
  · Light color: Can be selected from white / red / blue / green.
  [Applications]
  · Optimized for character recognition and 2D code reading.
  · Convenient for mounting substrate parts inspection and alignment mark reading.

  CAD ：

  2D / 3D

  Standard Price:	SGD 1,823.91-
  Days to Ship:	18 Day(s) or more

• 

  LED Lamps- Multi Lightings

  MISUMI

  LED lighting has a longer lifespan than traditional halogen and fluorescent lights. Maintenance frequency can be reduced.

  CAD ：

  2D / 3D

  Standard Price:	SGD 572.78-
  Days to Ship:	9 Day(s) or more

• 

  LED Lamps- Lightings / Backlight

  MISUMI

  LED light has a longer lifespan than conventional halogen and fluorescent lamps. Maintenance frequency can be reduced.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 1,314.00
  Days to Ship:	4 Day(s) or more

• 

  LED Lamps- Lightings / Direct Ring

  MISUMI

  LED light has a longer lifespan than conventional halogen and fluorescent lamps. Maintenance frequency can be reduced.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 1,314.00
  Days to Ship:	4 Day(s) or more

• 

  OPTEX FA Direct Bar Lighting, OPDB Series

  OPTEX FA

  It can widely be used as oblique lighting and backlight.
  [Features]
  ・ It can be selected from a lineup of 6 sizes depending on the illuminated area
  ・ Free mounting position with movable nuts
  ・ Since it has movable nuts, it is easy to adjust with the mounting jig.
  ・ It achieves high levels of illuminance, even when illuminating over long distances.
  ・ Adjusting the installation angle makes it illuminate from the optimum position
  ・ It can be installed freely, supporting various applications
  ・ It can be used as high-luminance surface lighting with a diffuser plate attached

  CAD ：

  2D

  Standard Price:	SGD 1,781.60
  Days to Ship:	20 Day(s) or more

• 

  Low Angle Direct Ring Lighting OPDR-LA Series

  OPTEX FA

  Low angle ring lighting ideal for edge extraction and scratch inspection on glossy surfaces.
  
  [Features]
  · Lighting that makes out surface scratches and similar defects and features by illuminating the workpiece from a shallow angle (in respect to the workpiece).
  · Makes out any differences in the scatter rate by illuminating the target object from an angle and controlling the generation of any ghosting/unwanted reflections.

  CAD ：

  2D

  Standard Price:	SGD 1,488.19
  Days to Ship:	20 Day(s) or more

• 

  Flat Direct Ring Lighting (Direct Light) IDR-F Series

  IMAC

  Lightweight flat-ring lighting that has shell type LEDs mounted horizontally to provide illumination over a wide range.
  [Features]
  · The flat illuminating surface enables illumination over a wide area.
  · Uses a POM case, with a ring with an O.D. of 90 mm and a weight of 85 g. Features a lightweight design that makes it ideal for being moved around as well.
  · Ultra-slim light is also available for dedicated use with the 16 mm diameter telecentric lens (LWD 40, 65).
  · Usable with auxiliary light of a coaxial spotlight source.
  · Light color: Can be selected from white / red / blue / green.
  [Applications]
  · Ideal for positioning, visual inspection, and character recognition when mounted on the end of robot arms.
  · Convenient for two-dimensional code reading, mounting substrate parts inspection, and alignment mark reading.

  CAD ：

  2D / 3D

  Standard Price:	SGD 1,045.81
  Days to Ship:	18 Day(s) or more

• 

  Low Angle Ring Light (Direct Light) IDR-LA Series

  IMAC

  General purpose ring lighting ideal for scratch inspection/edge detection by illuminating from a low angle.
  [Features]
  · Mounted on direct ring lighting at an angle.
  · Ideal for edge detection and scratch inspection with oblique irradiation.
  · The lineup contains various sizes, from standard outer diameters of 40 mm / internal diameter 15 mm to external diameter 200 mm/ internal diameter 170 mm.
  · Light color: Can be selected from white / red / blue / green.
  [Applications]
  · Ideal for inspecting tablets or powder for foreign matter and scratches or dirt.
  · Useful for reading engraved text on metal surfaces or substrate and sheet edge extraction.

  CAD ：

  2D / 3D

  Standard Price:	SGD 1,236.76-
  Days to Ship:	13 Day(s) or more

• 

  B'C Linear Light (Direct Light / Wide-Angle / Narrow-Angle) IDBA-LE Series

  IMAC

  Bar lighting optimal for large workpieces and long distances.
  [Features]
  · One-row specification equipped with high-output power LED.
  · 75 mm (12 V specification)/150 mm (24 V specification) increments up to 1,200 mm are supported.
  · Light color can be selected from white / red / blue / green / 850 infrared / 400 ultraviolet.
  [Applications]
  · Ideal for printing and visual inspections of large workpieces, etc.
  · Ideal as an auxiliary light source for inspection devices, or as a visual inspection light for tabletop use.
  · Convenient for the external inspection of metal plates and acrylics, etc.

  CAD ：

  2D

  Standard Price:	SGD 959.43-
  Days to Ship:	13 Day(s) or more

• 

  Chip LED Surface Illumination (Surface Emitting) IDHM Series

  IMAC

  Surface lighting with densely arranged chip LEDs.
  Backlight illumination achieves vivid silhouette images. Lineup in multiples of □30 mm. Can be selected to fit the image range.

  CAD ：

  2D / 3D

  Standard Price:	SGD 781.76-
  Days to Ship:	8 Day(s) or more

• 

  Coaxial Vertical Pseudo Lighting IFV Series

  IMAC

  Pseudo coaxial epi-illumination from the same optical axis as the camera axis, using a half mirror.
  [Features]
  · It enables inspection with specular reflection, making it effective for inspection of fine surface scratches and print/character inspection.
  · Available in 6 opening sizes from 13 mm to 100 mm.
  · BS (Beam Splitter) types help suppress ghost images.
  · Since the C01 type allows camera mounting in the horizontal direction, it can be selected according to the equipment space.
  · Light color can be selected from white / red / blue / green.
  [Applications]
  · Optimal for inspections of substrate patterns, sheet letters, gloss surface scratches, and characters.
  · Convenient for the pitch measurement of connector pins.

  CAD ：

  2D / 3D

  Standard Price:	SGD 2,280.04
  Days to Ship:	13 Day(s) or more

• 

  Transparent Lighting Direct Under Type Transparent Lighting Square Type TD Series

  NISSIN ELECTRO

  High luminosity transmitted illumination that has shell type LED elements mounted directly underneath the illuminating surface. Mountable in high densities from 4 mm element pitch. Illuminating surface is equipped with a special diffuser plate that has excellent diffusing properties. Utilized in transmissive illumination and reflective illumination for a wide range of lighting. Optional parts such as polarization plates can also be attached.
  
  [Applications] Various shape recognition, dimension measurement, foreign matter inspection, liquid level checking, pinhole inspection, sheet material inspection, etc.

  Standard Price:	SGD 2,441.60
  Days to Ship:	17 Day(s) or more

• 

  Direct Ring Lighting OPDR Series

  OPTEX FA

  It produces high-luminance levels by condensing light in the central part.
  [Features]
  ・ It achieves high-luminance illuminate by condensing light on a fixed distance to the workpiece
  ・ Uniformity is high because light is condensed from the outer perimeter of the ring
  ・ It is possible to illuminate over a wide range according to the size of the lighting.
  ・ It is effective for capturing by differences in reflectance of workpiece

  CAD ：

  2D

  Standard Price:	SGD 1,236.90-
  Days to Ship:	20 Day(s) or more

• 

  Surface Mounting Backlight OPSM Series

  OPTEX FA

  Thin and highly uniform high luminance backlight lighting in which chip LEDs are mounted in high densities.
  
  [Features]
  · Surface illumination from surface mounted chip LEDs. The light is made uniform by a diffuser plate.
  · Illuminates workpieces via the backlight. Used for determining shapes by their silhouette, etc.

  CAD ：

  2D

  Standard Price:	SGD 1,561.53
  Days to Ship:	20 Day(s) or more

• 

  Sensing Bar Lighting OPB-S Series

  OPTEX FA

  Bar lighting is three times brighter than conventional models and is equipped with a sensing function.
  
  [Features]
  · Provides luminance monitoring via the built-in sensor and long term stability via feedback.
  · Equipped with FALUX sensing.
  · The built-in photodiodes sense the luminance of the LED lighting.
  · Accurately measures the emitted luminance not just during continuous lighting conditions, but also under conditions where the light infrequently flashes on and off.
  · Furthermore, as well as the luminance of the emitted light, the internal temperature is also measured in the lighting itself, which can then be monitored on the power supply side.
  · Feedback control based off these monitored values is also possible using the OPPF series controller.
  · The absolute luminance makes adjusting for instrumentation errors for multiple light units easy.
  · The luminance at the time of shipping from the factory and the absolute luminance unique to the model are stored in the internal memory. The values can be referenced from the OPPF series.
  · With this, in addition to being able to monitor any changes in the luminosity values, adjusting for errors in the instrumentation for multiple lighting units is made easier by being able to compare the values with the absolute luminance value.
  · Inherits the performance of the popular OPB series.
  · Only 3.5 mm taller, even with the sensor built-in.
  · Corrections of fluctuations in brightness due to the FALUX and the excellent optical characteristics can be used as is.

  CAD ：

  2D / 3D

  Standard Price:	SGD 1,414.82-
  Days to Ship:	6 Day(s) or more

• 

  High Luminance B'C Line Lighting (2 Row Specification, Direct Light, Wide Angle/Narrow Angle) IDBA-LEH2 Series

  IMAC

  Direct-type bar lighting optimal for large workpieces and long distances.
  [Features]
  · 3 to 4 times brighter than IDBA-LE series. Light color can be selected from white / red / blue.
  · Narrow angle lighting type (L) that is optimal for long-distance lighting (WD 200 to 5,000 mm).
  · Wide angle lighting type (S) that is optimal for short-distance lighting (WD 80 to 200 mm).
  · Optimal for environments where lighting cannot be installed nearby and for applications for uniform irradiation within large trays.
  · 75 mm (12 V specification)/150 mm (24 V specification) increments up to 1,800 mm are supported.
  [Applications]
  · Ideal for printing and visual inspections of large workpieces (cardboard).
  · Convenient for use as an auxiliary light source in inspection equipment for applications that require a high speed shutter, such as transporting workpieces.

  CAD ：

  2D

  Standard Price:	SGD 1,195.03
  Days to Ship:	18 Day(s) or more

• 

  Square Surface Lighting (Indirect Light) IPQC Series

  IMAC

  Indirect lighting fixture with a low angle that illuminates from 4 directions.
  Uses high-power LEDs for at least 10 times as much light as conventional products. Ideal for engraving/edge extraction of square workpieces.

  CAD ：

  2D / 3D

  Standard Price:	SGD 1,361.52-
  Days to Ship:	18 Day(s) or more

• 

  Highly Uniform Multi Ring Lighting VRMD Series

  SHIMATEC

  Universal ring lighting which can easily provide the ideal image just by changing the lighting height.
  [Features]
  · The original design of the diffusion plate delivers uniform wide-angle illumination.
  · Dust can be cleaned away easily at any time as the diffusion plate covers the entire light emission section.
  · The diffusion plate also comes with a protective cover for resistance to external impact, minimizing damage caused during accidents, etc.
  · Separate supported power supply controller VS-24 series and extension cable required.
  [Applications]
  · Ideal for all types of image processing, LCD alignment, and PCB alignment inspections.
  · Ideal for inspections of chip components, electronic components, and food cup inner surfaces.
  · Perfect for cleanrooms in semiconductor factories or food processing factories.

  CAD ：

  2D

  Standard Price:	SGD 1,711.00-
  Days to Ship:	13 Day(s) or more

• 

  High Luminance Multi Ring Lighting VRMD UP Series

  SHIMATEC

  High brightness type universal ring lighting which can easily provide the ideal image just by changing the lighting height.
  [Features]
  · Effects of the translucent diffuser plate enable brightness to be concentrated on a smaller area than the standard type.
  · Dust can be cleaned away easily at any time as the diffusion plate covers the entire light emission section.
  · The diffusion plate also comes with a protective cover for resistance to external impact, minimizing damage caused during accidents, etc.
  · Separate supported power supply controller VS-24 series and extension cable required.
  [Applications]
  · Ideal for all types of image processing, LCD alignment, and PCB alignment inspections.
  · Ideal for inspections of chip components, electronic components, and food cup inner surfaces.
  · Perfect for cleanrooms in semiconductor factories or food processing factories.

  CAD ：

  2D

  Standard Price:	SGD 1,711.00-
  Days to Ship:	13 Day(s) or more

• 

  Highly Uniform Dome Lighting VDSD Series

  SHIMATEC

  Dome lighting with excellent uniformity and brightness.
  [Features]
  · Uniform and very high brightness.
  · In addition to the illumination of the dome, it can irradiate diffused light from the side.
  · More uniform irradiation is possible through a combination of two types of lights.
  · The edge direction and the upward direction can be dimmed and lit independently.
  · Separate supported power supply controller VS-24 series and extension cable required.
  [Applications]
  · Ideal for inspection of uneven products and foreign matter inspections of food packages, containers, etc.

  Standard Price:	SGD 2,058.07-
  Days to Ship:	13 Day(s) or more

• 

  Low Cost Type Surface Emission (for Transmission) Light VDFK Series

  SHIMATEC

  Light-emitting fitting that supports a maximum illuminating surface of 300 x 200 mm.
  [Features]
  · Square surface lighting uses an optical guide plate.
  · Up to 300 x 200 mm light emitting surfaces can be provided at a reasonable cost.
  · Separate supported power supply controller VS-24 series and extension cable required.
  [Applications]
  · Ideal for all types of external inspections and dimensional measurements.
  · Ideal for permeation of large workpieces.
  · Can also be used for surface emission reflective lighting in addition to transmissive lighting.

  CAD ：

  2D

  Standard Price:	SGD 1,262.68-
  Days to Ship:	13 Day(s) or more

• 

  VXHSL Series Coaxial Vertical Lighting

  SHIMATEC

  Small coaxial illumination equipment with excellent uniformity.
  [Features]
  · Light can be reflected off a flat workpiece by irradiation from the same axis as the camera to make the detected object stand out.
  · The lighting itself is compact but features a wide effective irradiation area.
  · Separate supported power supply controller VS-24 series and extension cable required.
  [Applications]
  · Ideal for all types of image processing, LCD alignment, PCB alignment, glass, metal, and wafer inspections.
  · Optimal for gloss on metals and glass and for mirror-surfaced workpieces.

  Standard Price:	SGD 2,246.09-
  Days to Ship:	13 Day(s) or more

• 

  General Purpose Bar Illumination, VANSF Series

  SHIMATEC

  Universal bar lighting that combines well balanced brightness and uniformity.
  [Features]
  · Uniformity is improved further by mounting an optional diffusion plate.
  · Separate supported power supply controller VS-24 series and extension cable required.
  [Applications]
  · Useful for all types of image processing, LCD alignment, PCB alignment, and inspections of chip components and electronic components.

  CAD ：

  2D

  Standard Price:	SGD 1,682.07-
  Days to Ship:	13 Day(s) or more

• 

  Direct Lighting Direct Irradiation Type DR Series

  NISSIN ELECTRO

  LEDs are arranged on a ring, illuminating toward the center. Light from the element lights the target object directly.
  Each LED element emits light with a divergent angle to brightly and uniformly illuminate surfaces.
  
  [Applications] Inspection of various characters, printed surface contamination/scratch inspection, measurement inspection, etc.

  Standard Price:	SGD 3,085.45
  Days to Ship:	12 Day(s) or more

• 

  Direct Lighting Low-Angling DR-LA Series

  NISSIN ELECTRO

  By placing illumination at a low position and lighting from diagonally above, a vivid image with emphasized outlines and edges of workpieces can be obtained. LEDs are arranged in a ring shape that is closer to the vertical, illuminating toward the center.
  
  [Applications] Detection of various edges, inspection of engraved/scratched metal surfaces, printed surface contamination/scratch inspection, etc.

  Standard Price:	SGD 1,796.56-
  Days to Ship:	17 Day(s) or more

• 

  Direct Lighting Direct Irradiation Square Type DL Series

  NISSIN ELECTRO

  Square direct lighting with a rectangular or square shaped illuminating surface. Available in abundant variations from small to large light emitting surfaces. Can be used for irradiation over a wide surface area. Optional diffusion plate and polarizing plate are also available.
  
  [Applications] Inspection for various foreign matter, reading of various characters, product presence inspection, etc.

  Standard Price:	SGD 3,400.43
  Days to Ship:	12 Day(s) or more

• 

  RGB 3Color Light Full 3 Color Type F Series

  NISSIN ELECTRO

  This is the "Full Color LED Lighting Series" equipped with RGB three primary color chip LED elements.
  Choose from a wide array of tones, from monochromatic luminescence to white. Standard 11-inch type for uniform surface lighting, bar lighting, etc.

  Standard Price:	SGD 2,951.83-
  Days to Ship:	12 Day(s) or more

• 

  Narrow-Angle Light Distribution Coaxial Light IFVA Series

  IMAC

  Narrow-angle light distribution coaxial light that provides high illumination, high uniformity, and a compact housing.
  
  [Features]
  · Because it allows testing using specular reflection, it is effective for inspecting for fine scratches on surfaces or inspections of printing and lettering.
  · Brightness is at least 3 times that of the IFV series.
  · The uniformity of the light emitting surface has been improved, enabling uniform lighting even of glossy workpieces that reflect light.
  · Despite its compact housing, the aperture on the camera side has been widened as much as possible to ensure a wide field of view.

  CAD ：

  2D / 3D

  Standard Price:	SGD 1,075.80-
  Days to Ship:	8 Day(s) or more

• 

  Direct Ring Lighting UDR Series

  U-TECHNOLOGY

  [Features]
  ・ Lighting suitable for inspection of various purposes.
  ・ High luminance can be obtained by direct illumination.
  ・ Lighting that can be easily installed and adjusted by illuminating from the 360° direction.
  ・ The light quality can be changed by using a diffuser plate and a polarizing plate.
  [Applications]
  ・ Board inspection.
  ・ Scratch inspection.
  ・ Surface inspection.
  ・ Dirt inspection.

  Standard Price:	SGD 1,804.80
  Days to Ship:	10 Day(s) or more

• 

  Square Lens Lighting IFHA Series

  IMAC

  Lightweight lens lighting with low profile of 8 mm.
  [Features]
  ・ Since there is no camera window, there is no light leakage and it is possible to evenly illuminate the entire glossy workpiece
  ・ Sharpness is greatly improved by the special optical design. Printed characters such as barcodes can be captured clearly
  ・ It can be installed in a space smaller than the housing size of only 8 mm
  ・ With a rich lineup of light emitting surfaces of 50 × 50 to 200 × 200 mm, the ideal shape can be selected.
  ・ The brightness is 6 times higher than before, so it can be used with high-speed shutters

  CAD ：

  2D / 3D

  Standard Price:	SGD 2,212.68
  Days to Ship:	16 Day(s) or more

• 

  Dedicated Light Units For Image Processing [FLV]

  OMRON

  A wide range of lineup consists of light units such as ring light, bar light, spot light, etc.

  CAD ：

  2D / 3D

  Standard Price:	SGD 2,666.65-
  Days to Ship:	14 Day(s) or more

Loading...