Holder

• 

  Compact Mirror Holder (Optical Axis 25 mm Type)

  SURUGA SEIKI

  A mirror holder with an optical axis height of 25 mm. For use with the Opt Station. Select the most appropriate mounting method so that the held element does not distort when mounted. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  CAD ：

  2D / 3D

  Standard Price:	SGD 190.80
  Days to Ship:	4 Day(s) or more

• 

  Alignment target

  SURUGA SEIKI

  Can be used for optical system constructions. [Features]· Used for adjusting the optical axis when building an optical system for the Opt Station.· Push-down the large target-fixing pin to fix to the tapped hole on the plate board.· Return the pin upward to install in any position.· The mark on the target is adjusted to a height of 45 mm.· Target stickers (black cross on a white base / white cross on a black base) are included.

  CAD ：

  2D / 3D

  Standard Price:	SGD 159.14
  Days to Ship:	9 Day(s) or more

• 

  Compact Mirror Holder (with lock)

  SURUGA SEIKI

  [Features]· A holder for holding small mirrors up to ø30 mm. The tilt (θy, θz) can be adjusted in the two axes.· Adhesive type and three-point support type fixing are available for the mirror fixing methods.· With the rod-less type, M3 or M6 screws are used for fixing.· With the three-point support type (F58N-30-2), mirrors from ø20 to 30 mm can be held by changing the position of the lower supporting pin.· The fine tilt-adjustment knob is P ...Readmore

  CAD ：

  2D / 3D

  Standard Price:	SGD 143.69-
  Days to Ship:	4 Day(s) or more

• 

  3-axis lens holder

  SURUGA SEIKI

  [Features]· The B11-40C is employed for the X-axis while the optical axis is configured at 45 mm.· Replace the lens and/or adapter to allow for use in different types of application.

  CAD ：

  2D / 3D

  Standard Price:	SGD 977.74-
  Days to Ship:	4 Day(s) or more

• 

  Ferrule Adapter

  SURUGA SEIKI

  An adapter for holding ferrules. Can hold fibers with not only ferrules but also those with SELFOC lenses, etc. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  CAD ：

  2D

  Standard Price:	SGD 96.26
  Days to Ship:	9 Day(s) or more

• 

  Lens Holder (F40)

  SURUGA SEIKI

  Used for fixing circular items such as lenses, mirrors, and filters etc. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  CAD ：

  2D / 3D

  Standard Price:	SGD 61.95-
  Days to Ship:	4 Day(s) or more

• 

  Grooved holder

  CHUO PRECISION INDUSTRIAL

  [Features]· A holder for mirrors and charts, etc. Insert the corresponding item into the groove and fix in place with a clamp screw.· Duracon® is inserted at the tip of the clamp screw and a fluoropolymer sheet is attached to the other side in order to avoid scratching of the clamped item."Duracon®" is a registered trademark of Polyplastics Co., Ltd. in Japan and other countries.

  CAD ：

  2D

  Standard Price:	SGD 79.72-
  Days to Ship:	7 Day(s) or more

• 

  LD Holder (Chip Carrier Type)

  SURUGA SEIKI

  [Features]· A Chip Carrier type LD holder with a built-in Peltier element.· Features a built-in Peltier element, and a calibrated 10kΩ thermistor sensor.· The switching for the anode/cathode of the LD can be configured by replacing the jumper pins.· There are two types of Chip Carrier LD holder. Configure according to the mounting (output) direction of the LD.· For connectors, a D-sub9 pin female is used for driving the LD, and a D-sub9 pin mal...Readmore

  CAD ：

  2D / 3D

  Standard Price:	SGD 1,103.28
  Days to Ship:	10 Day(s) or more

• 

  Adapter for Isolator

  SURUGA SEIKI

  Can be used for optical system constructions. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  Standard Price:	SGD 174.87
  Days to Ship:	9 Day(s) or more

• 

  Collimating Lens Adapter

  SURUGA SEIKI

  An adapter for holding ø4 to ø14.5 mm cylindrical items such as collimating lenses, etc. Used by attaching to various types of cross motion holder. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  Standard Price:	SGD 72.68
  Days to Ship:	9 Day(s) or more

• 

  Sensor/laser holder

  SURUGA SEIKI

  [Features]· Can adjust the tilt angle of small sensors and laser pointers.· P.C.D.32 tapped holes are included on the holder surface. Uses these to mount various types of adapter plate.

  CAD ：

  2D / 3D

  Standard Price:	SGD 238.00
  Days to Ship:	4 Day(s) or more

• 

  Beam steering holder

  SURUGA SEIKI

  [Features]· Types in which only the upper mirror is movable and types in which both the upper and lower mirrors are movable are available.· The pitch of the adjustment screw can be selected from 0.5 mm and 0.25 mm.· Adhesive fixing and three-point support fixing types are available for the mirror.· The lower side of the pole is an M16P (= 1 mm) male screw.· Can be fixed to magnetic bases and plates, etc.

  CAD ：

  2D / 3D

  Standard Price:	SGD 496.13
  Days to Ship:	8 Day(s) or more

• 

  Prism Holder

  SURUGA SEIKI

  [Features]· Configured so that the optical axis height is at the center of the element when the element is 20 mm, and standardized at 25 mm from the bottom.· Move the upper sliding part to fix the prism.· Use the upper knob to fix without having to move the element.· The F551-20 bottom plate features M4 tapped holes. Mount a rod to change to a rod type.· F552-20 can be finely adjusted.· The elements are positioned using the pins...Readmore

  CAD ：

  2D / 3D

  Standard Price:	SGD 128.40-
  Days to Ship:	9 Day(s) or more

• 

  Mirror Holder

  SURUGA SEIKI

  An affordable mirror holder for fixing items such as mirrors or plate beam splitters. The tilt can be finely adjusted in the two axial directions. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  CAD ：

  2D / 3D

  Standard Price:	SGD 207.81-
  Days to Ship:	7 Day(s) or more

• 

  Mirror Holder (Strip Clamp)

  SURUGA SEIKI

  A mirror holder with a slit-clamp type lock. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  CAD ：

  2D / 3D

  Standard Price:	SGD 253.89-
  Days to Ship:	4 Day(s) or more

• 

  Round Laser Holder

  SURUGA SEIKI

  [Features]· F20 sandwiches the laser between three screws. The optical axis is adjusted by screwing in and out.· With F21, in addition to the function of F20, it is possible to adjust in the θy direction by operating the screw at the bottom of the holder.· Both F20 and F21 have two types, L=150 and 250, depending on the length of the laser.· The included standard rod has a diameter of ø20 and a length of 60, but both the rod diameter and le...Readmore

  CAD ：

  2D / 3D

  Standard Price:	SGD 240.85-
  Days to Ship:	4 Day(s) or more

• 

  Resin ring

  SURUGA SEIKI

  [Features]· A product for fixing lenses and mirrors to holders by the manufacturer.· Note that this product has been designed exclusively for holders from the manufacturer.· Note that even when the diameters are the same, the shapes can differ depending on the product.

  CAD ：

  2D / 3D

  Standard Price:	SGD 8.18
  Days to Ship:	4 Day(s) or more

• 

  Self-centering Lens Holder: for Collimating Lens Precision Cross Roller Type

  SURUGA SEIKI

  [Features]· Can be used for the construction of optical systems.

  Standard Price:	SGD 646.93
  Days to Ship:	9 Day(s) or more

• 

  Centering Lens Holder: Objective Lens Stable Operation Focusing Type

  SURUGA SEIKI

  [Features]· Can be used for the construction of optical systems.· When using objective lenses with large outer diameters. The F504-40 series high rigidity cross motion holder is recommended.

  CAD ：

  2D / 3D

  Standard Price:	SGD 709.81
  Days to Ship:	9 Day(s) or more

• 

  Iris diaphragm

  SURUGA SEIKI

  [Features]· A holder with an iris diaphragm.· The aperture diameter is variable from ø1.5 to ø27 mm.· Rotate the aperture-adjustment knob (shared with the clamp) to fix.

  CAD ：

  2D / 3D

  Standard Price:	SGD 332.70
  Days to Ship:	4 Day(s) or more

• 

  High-Performance Mirror Holder (Optical Axis: 25 mm Type)

  SURUGA SEIKI

  [Features]· A compact version of the FM532.· Designed with an optical axis height of 25 mm. For use with the Opt Station.· A product that is ideal for applications where a high level of precision and alignment is necessary, or where stability and operability are important.

  CAD ：

  2D / 3D

  Standard Price:	SGD 206.57
  Days to Ship:	4 Day(s) or more

• 

  O-type mechanical stand

  CHUO PRECISION INDUSTRIAL

  [Features]· A stand for attaching and positioning the "Tool Scope" working-microscope.· As functions of the stand, products with one or three movement directions, products with a wide movement range, and products capable of micro-motion/coarse-motion adjustments etc., are available.· Includes a ø30H8 lens barrel holder to which the tool scope can be fixed.

  CAD ：

  2D

  Standard Price:	SGD 598.00-
  Days to Ship:	7 Day(s) or more

• 

  Adapter

  CHUO PRECISION INDUSTRIAL

  [Features]· For changing the aperture to fit the holder when using a lens that does not fit

  CAD ：

  2D

  Days to Ship:	7 Day(s) or more

• 

  Compact, thin-type Y rail

  CHUO PRECISION INDUSTRIAL

  [Features]· A Y type aluminum rail.· Carriers (the C-211(- 1)P and C-211(- 2)P) can be used for X type rails as is.· Can be used with a lower optical axis than X types.· The spacing between the M6 counterbore holes for attaching to surface plates is 100 mm.· With a lever type magnet stand mounted using the M4 counterbore holes, it is possible to magnetically attach and fix to surface plates, etc.· Includes memory with scale.

  CAD ：

  2D

  Standard Price:	SGD 363.94-
  Days to Ship:	19 Day(s) or more

• 

  S-type Stands

  CHUO PRECISION INDUSTRIAL

  [Features]· A stand for attaching and positioning the "Tool Scope" working-microscope.· As functions of the stand, products with one or three movement directions, products with a wide movement range, and products capable of fixing a sample stage, etc., are available.· Includes a ø30H8 lens barrel holder to which the tool scope can be fixed.· Tool Scope is a registered trademark of Chuo Precision Industrial Co., Ltd.

  CAD ：

  2D

  Standard Price:	SGD 604.10-
  Days to Ship:	7 Day(s) or more

• 

  Connection adapter Set base

  MIRUC OPTICAL

  [Features]Set base for arm fittings. Selectable from 2 types: one that supports only -A arm fittings, and one that supports all arm fittings.

  CAD ：

  2D

  Standard Price:	SGD 66.63-
  Days to Ship:	8 Day(s) or more

• 

  Tilting/Rotating Prism Holder

  CHUO PRECISION INDUSTRIAL

  [Features]· The IR-P1 tilting/rotating prism holder can be used with prisms up to 25 mm in size.· The IR-P1 tilting/rotating prism holder is a prism holder that features dual-axis tilt adjustment and single-axis rotation adjustment capabilities. It also features less protrusion from the main body than conventional types and can be used to install prisms without taking up space.

  Standard Price:	SGD 562.61
  Days to Ship:	22 Day(s) or more

• 

  5-axis lens holder

  SURUGA SEIKI

  Replace the lens and/or adapter to allow for use in different types of application. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  CAD ：

  2D / 3D

  Standard Price:	SGD 1,182.52-
  Days to Ship:	9 Day(s) or more

• 

  LD Holder

  SURUGA SEIKI

  F511L: fixed type. F512L, F513L: YZ axis adjustable LD holder. Select according to the number of pins and the pin pitch (pin P.C.D.) of the LD.

  CAD ：

  2D / 3D

  Standard Price:	SGD 143.47-
  Days to Ship:	9 Day(s) or more

• 

  LD holder (To-Package type)

  SURUGA SEIKI

  [Features]· A To-Package type LD holder with a built-in Peltier element.· Features a built-in Peltier element, and a calibrated 10kΩ thermistor sensor.· Supports LD sizes of ø5.6 (Pin PCD, 2.0) and ø9.0 (Pin PCD, 2.54) for three-pins and for four-pins respectively.· For common anodes and common cathodes, etc., configure by replacing the jumper pins.· For connectors, a D-sub9 pin female is used for driving the LD, and a D-sub9 pin mal...Readmore

  CAD ：

  2D / 3D

  Standard Price:	SGD 1,103.28
  Days to Ship:	4 Day(s) or more

• 

  Screw Ring

  SURUGA SEIKI

  A threaded ring for fixing lenses and mirrors. Note that even when the diameters are the same, the shapes can differ depending on the product. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  CAD ：

  2D / 3D

  Standard Price:	SGD 12.89-
  Days to Ship:	4 Day(s) or more

• 

  Polarizer holder with tilt

  SURUGA SEIKI

  A holder that can retain items such as polarizing plates and wave plates. It can also rotate (θx) and tilt them (θy, θz). Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  CAD ：

  2D / 3D

  Standard Price:	SGD 948.77
  Days to Ship:	12 Day(s) or more

• 

  Camera holder (F119-2)

  SURUGA SEIKI

  A holder for fixing cameras, CCD cameras, and vidicon cameras, etc. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  CAD ：

  2D / 3D

  Standard Price:	SGD 192.62
  Days to Ship:	4 Day(s) or more

• 

  Adapter for connector

  SURUGA SEIKI

  [Features]· An adapter for optical fiber connectors.· An FC type receptacle is included as standard, so please select according to the connector.· The FC type receptacle is designed so that when a connector is inserted, the end surface of the ferrule extends about 0.5 mm from the receptacle surface. Ideal for placing in close proximity to other items.

  CAD ：

  2D / 3D

  Standard Price:	SGD 127.70
  Days to Ship:	4 Day(s) or more

• 

  Gimbaled Mirror Holder

  SURUGA SEIKI

  A holder for fixing items such as mirrors or plate beam splitters etc. The tilt can be adjusted in the two axial directions. The center of rotation and the center of the mirror always coincide when making fine adjustments.[Features]■ F50, F55· Holders for fixing mirrors, plate beam splitters, and lenses, etc. The tilt (θy, θz) can be finely adjusted.· Fine movement of ±4° to 6° is possible, in both θy and θz, by tightening the clamp. Loosening th...Readmore

  CAD ：

  2D / 3D

  Standard Price:	SGD 350.08-
  Days to Ship:	4 Day(s) or more

• 

  Slid lens holder

  SURUGA SEIKI

  [Features]· Used for fixing round/square lenses or cylindrical/rectangular items of any size.· The attachment and detachment of elements is done by loosening the slide-clamp screw on the side surface, adjusting the position and, after fixing the screws, fixing the element using the clamp screw on the top.· The F44 can hold cylindrical elements such as lenses, while the F45 is suitable for fixing rectangular elements such as cylindrical lenses.

  CAD ：

  2D / 3D

  Standard Price:	SGD 128.67-
  Days to Ship:	4 Day(s) or more

• 

  SELFOC Lens Adapter

  SURUGA SEIKI

  An adapter for holding cylindrical items. Used by setting on to fixed type holders and various types of cross motion holder. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  CAD ：

  2D / 3D

  Standard Price:	SGD 190.64
  Days to Ship:	9 Day(s) or more

• 

  Sensor adapter

  SURUGA SEIKI

  [Features]· An adapter for holding round sensors and lasers.· The adapter thickness has been set to 12 mm, increasing the holding force.· Specify the ø diameter when ordering.

  Standard Price:	SGD 80.65
  Days to Ship:	9 Day(s) or more

• 

  Power meter holder

  SURUGA SEIKI

  [Features]· A holder for fixing commercially available power meter sensors.· Mainly for fixing rectangular power meter sensors. Constructed so that the sensor will not shift, even when the sensor cable is pulled.· Fixing is done using a method of sandwiching with screws from the top.· Sensors that can be fixed are of limited availability.· Can be directly mounted onto bases with the rods removed.

  CAD ：

  2D / 3D

  Standard Price:	SGD 160.65
  Days to Ship:	4 Day(s) or more

• 

  Pin Hole Holder

  SURUGA SEIKI

  [Features]· Capable of fixing pinholes and moving them in micro-movement increments in the YZ axis direction.· Pin holes with an external diameter of ø16 mm can be used.· Fix pin holes with an M20P = 0.5 threaded ring.· The optical axis central height is standardized at 25 mm from the bottom.

  CAD ：

  2D / 3D

  Standard Price:	SGD 662.59
  Days to Ship:	9 Day(s) or more

• 

  Pinhole Adapter

  SURUGA SEIKI

  Used by attaching to various types of cross motion holder. The applicable diameter of the pin hole is ø16 mm. Attachment and detachment is carried out using a threaded ring system. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  CAD ：

  2D / 3D

  Standard Price:	SGD 64.83
  Days to Ship:	9 Day(s) or more

• 

  Rod with Plate

  SURUGA SEIKI

  [Features]· Can be fitted with 40 mm stages and holders for Opt Stations, etc.· Can be arranged as needed and mounted to cross clamps, etc.

  CAD ：

  2D / 3D

  Standard Price:	SGD 65.21-
  Days to Ship:	8 Day(s) or more

• 

  Ring Wrench (A92)

  SURUGA SEIKI

  A ring wrench for tightening threaded rings. Variable types and fixed types are available in sizes to fit different ring diameters. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  CAD ：

  2D

  Standard Price:	SGD 98.39-
  Days to Ship:	9 Day(s) or more

• 

  Adapter for lens

  SURUGA SEIKI

  An adapter for lenses with an outer diameter of ø10 mm, ø12.7 mm, ø15 mm, ø20 mm, and ø25.4 mm. Used by attaching to various types o cross motion holder.[Features]· Used by attaching to various types of cross motion holder. Various types of single lens.· Lens attachment and detachment is carried out using a threaded ring system. Note: Includes threaded rings and resin rings. Note: A ring wrench for tightening threaded rings.

  CAD ：

  2D / 3D

  Standard Price:	SGD 64.83
  Days to Ship:	4 Day(s) or more

• 

  Small Upward Operation Mirror Holder

  SURUGA SEIKI

  A top operated mirror holder with excellent stability and operability. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  CAD ：

  2D / 3D

  Standard Price:	SGD 380.02-
  Days to Ship:	9 Day(s) or more

Loading...