Stepping Motors（Holding torque (classification)：~0.4）

• • On Sale Till 31/12/2024

  

  High Torque 2-Phase Stepping Motor, Standard type, PKP Series

  ORIENTAL MOTOR

  [Features]
  ・ In addition to increasing the torque of the motor, a wide range of motor current specifications are available
  ・ Please choose the ideal motor according to your design scene
  ・ By using a motor with a high torque design, the manufacturer has achieved a torque increase of 1.2 to 1.7 times (maximum excitation static torque) compared to the standard type PK series of the same size

  Standard Price:	SGD 83.00-
  	Special Price
  Days to Ship:	12 Day(s) or more

• • On Sale Till 31/12/2024

  

  Stepper Motor, PK Series

  ORIENTAL MOTOR

  Oriental Motor, stepper motor PK Series.

  Standard Price:	SGD 92.00-
  	Special Price
  Days to Ship:	17 Day(s) or more

• • On Sale Till 31/03/2025

  

  Stepper Motor for Units

  ORIENTAL MOTOR

  This is an individual motor (component) of the stepper motor unit.

  Standard Price:	SGD 470.00-
  	Special Price
  Days to Ship:	17 Day(s)

• • On Sale Till 31/03/2025

  

  Stepper Motor, CRK Series

  ORIENTAL MOTOR

  The CRK Series built-in positioning function type is a microstepping-driven DC input 5-phase stepper motor unit with a built-in positioning function in a compact driver.
  [Features]
  ・ Lineup of products with encoders (CRK only)
  ・ A high torque, low vibration stepper motor with a basic step angle of 0.72 (500 divisions per rotation) (PK only)
  ・ High-precision positioning can be achieved with low vibration and low noise (A separate driver is required to drive) (PK only)

  Standard Price:	SGD 874.00-
  	Special Price
  Days to Ship:	37 Day(s)

• 

  42/57 Series High Torque Hybrid Type Stepper Motor With an Integrated Step Angle of 1.8

  FULLING MOTOR

  - 42/57 Series High Torque Hybrid Type Stepper Motor with 1.8° step angle from FULLING MOTOR
  - Step angle: 1.8°
  - Step angle accuracy: ± 5% (full step, no load)
  - Resistance accuracy: ± 10% (20℃)
  - Inductance accuracy: ± 20% (1kHz)
  - Temperature Rise: 80℃ Max.
  - Ambient Temperature: -20℃～+50℃
  - Insulation Resistance: 100MΩ Min. ,500VDC
  - Dielectric Strength: 500VAC for one minute
  - Max. radial force: 28N (20mm from the flange)
  - Max. axial force: 10N
  

  CAD ：

  2D / 3D

  Standard Price:	SGD 173.13
  Days to Ship:	7 Day(s)

• • On Sale Till 31/12/2024

  

  High Torque 2-Phase Stepping Motor, SH Geared Type, PKP Series

  ORIENTAL MOTOR

  [Features]
  ・ New high torque 2-phase stepper motor PKP Series
  ・ In addition to increasing the torque of the motor, a wide range of motor current specifications are available
  ・ Please choose the ideal motor according to your design scene
  ・ A geared type effective for deceleration, torque increase, resolution increase, and vibration countermeasures
  ・ Backlash is smaller than conventional products. Also, wider speed range and easier to use

  Standard Price:	SGD 215.00-
  	Special Price
  Days to Ship:	17 Day(s)

• • On Sale Till 31/12/2024

  

  VEXTA Accessory

  ORIENTAL MOTOR

  - Stepping motor and accessory of CSK series from ORIENTAL MOTOR.
  - High torque, The PK high torque motor was designed to produce high torque in a compact frame size.
  - Vibration and noise levels low.
  - Compact package, Both the motor and driver are designed to be compact, making them perfect for reducing the size and weight of machines.
  - High resolution, the 5-phase stepping motors have 0.72˚ per step in full-step mode and 0.36˚ per step in half-step mode.
  

  Standard Price:	SGD 977.00
  	Special Price
  Days to Ship:	37 Day(s)

• • On Sale Till 31/12/2024

  

  Stepper Motor, UPKW Series

  ORIENTAL MOTOR

  - Stepping Motor, UPKW Series from ORIENTAL MOTOR.
  - Compact Drivers, The UPK•W series drivers are only 5.31 inch (135mm) high and therefore, keep the installation area small. They also come with a built-in mounting bracket for easy installation.
  - The UPK•W series does more than provide higher torque. It is also designed so that the motor produces less vibration, and a new driver has been developed to include a vibration control circuit to dramatically reduce vibration in the mid-speed range (1-5kHz).
  

  Standard Price:	SGD 623.00
  	Special Price
  Days to Ship:	17 Day(s)

• 

  42 Series 2-Phase, High Torque Hybrid Stepper Motor, Step Angle 0.9°

  FULLING MOTOR

  - 42 Series 2-Phase, High Torque Hybrid Stepper Motor with 0.9° step angle from FULLING MOTOR
  - Step angle: 0.9°
  - Step angle accuracy: ± 5% (full step, no load)
  - Resistance accuracy: ± 10% (20℃)
  - Inductance accuracy: ± 20% (1kHz)
  - Temperature Rise: 80℃ Max.
  - Ambient Temperature: -20℃～+50℃
  - Insulation Resistance: 100MΩ Min. ,500VDC
  - Dielectric Strength: 500VAC for one minute
  - Max. radial force: 28N (20mm from the flange)
  - Max. axial force: 10N
  

  CAD ：

  2D / 3D

  Standard Price:	SGD 77.64
  Days to Ship:	11 Day(s)

• 

  Controller Built-In Micro Step Driver and Stepper Motor Set CSA-UP Series

  SHINANOKENSHI

  Various operations can be programed in 8 tables
  
  [Features]
  · Integrated controller function for small and lightweight drivers.
  · Various operations can be programed in 8 tables.
  · 4 levels of micro step division (1, 2, 4, 16) selectable.
  · Home return operation possible with origin sensor input.
  · Easy setting with the included dedicated application.
  · Input power supply: DVC24V.
  Error output function.
  · Abundant protection functions (excess heating, voltage and current).

  Standard Price:	SGD 323.68-
  Days to Ship:	9 Day(s) or more

• 

  Stepping motor single unit 42 mm 1.8° / step unipolar connector type

  SANYO DENKI

  [Features]
  ·high torque stepping motor
  ·A product that achieves an ultra-compact motor size of □42 mm

  Standard Price:	SGD 70.54
  Days to Ship:	12 Day(s) or more

• 

  Two-Shaft Simultaneous Drive Speed Controller and Double Stepper Motor Set CSA-UT Series

  SHINANOKENSHI

  [Features]
  · Simultaneous 2 motors operation with one controller.
  · Oscillator (pulse generator) built in.
  · All motor operations can be set at numeric values.
  · Equipped with 2 speed setting function (internal setting value / external analog input).
  · Rotation speed: 1 to 1,800r/min, 1r/min may not reach maximum speed depending on the type of motor setting unit, (1,800r/min)
  · Acceleration / deceleration setting: 0 to 99.99 seconds.
  · Current setting: 0 to 2.00A.
  · Continuous reciprocating rotation.
  · Stall detection function (input feedback time).
  · Lightweight and compact design: W70XH90XD33 mm, 190 g.

  Standard Price:	SGD 445.45-
  Days to Ship:	6 Day(s) or more

• 

  42 Series 2-Phase, High Torque Hybrid Stepper Motor, Step Angle 1.8°

  FULLING MOTOR

  - 42 Series 2-Phase, High Torque Hybrid Stepper Motor with 1.8° step from FULLING MOTOR.
  - Step angle: 1.8°
  - Step angle accuracy: ± 5% (full step, no load)
  - Resistance accuracy: ± 10%
  - Inductance accuracy: ± 20%
  - Temperature Rise: 80℃ Max. (rated current, 2 phase on)
  - Ambient Temperature: -20℃～+50℃
  - Insulation Resistance: 100MΩ Min. ,500VDC
  - Dielectric Strength: 500VAC for one minute
  - Max. radial force: 28N (20mm from the flange)
  - Max. axial force: 10N
  

  CAD ：

  2D / 3D

  Standard Price:	SGD 66.80-
  Days to Ship:	11 Day(s)

• 

  5-Phase Micro step driver and stepping motor set CSA-UB series

  SHINANOKENSHI

  5 phase equivalency at with 2 phases at low cost
  
  [Features]
  · 2 phase motor achieving resolution equivalent to a 5 phase motor at low cost.
  · A maximum 25,600 divisions per revolution (minimum step angle: 0.0140625°).
  · Choose from 16 levels (1 to 128).
  · 16 step current setting: 0 to 3.0A (Max).
  · With forward rotation / reverse rotation limit input.
  · Auto power down function

  Standard Price:	SGD 244.46-
  Days to Ship:	6 Day(s) or more

• 

  Controller Built-in Microstepping Driver & Stepper Motor Set, CSA-UP With Power Supply Unit

  SHINANOKENSHI

  Various operations can be programed in 8 tables
  
  [Features]
  · Integrated controller function for small and lightweight drivers.
  · Various operations can be programed in 8 tables.
  · 4 levels of micro step division (1, 2, 4, 16) selectable.
  · Home return operation possible with origin sensor input.
  · Easy setting with the included dedicated application.
  · Input power supply: DC24V.
  · Error output function.
  · Abundant protection functions (excess heating, voltage and current).

  Standard Price:	SGD 410.98-
  Days to Ship:	9 Day(s) or more

• 

  2-Axis Simultaneous Drive Speed Controller & Stepper Motor 2-Unit Set, CSA-UT Series With Power Supply Unit

  SHINANOKENSHI

  [Features]
  · Simultaneous 2 motors operation with one controller.
  · Oscillator (pulse generator) built in.
  · All motor operations can be set at numeric values.
  · Equipped with 2 speed setting function (internal setting value / external analog input).
  · Rotation speed: 1 to 1,800 r/min,1 r/min setting unit.
  · Acceleration / deceleration setting: 0 to 99.99 seconds.
  · Current setting: 0 to 2.00A.
  · Continuous reciprocating rotation.
  · Stall detection function (input feedback time).
  · Lightweight and compact design: W70 × H90 × D33 mm, 190 g.

  Standard Price:	SGD 562.68-
  Days to Ship:	9 Day(s) or more

• 

  Step out detection driver & stepping motor set CSA-BX series

  SHINANOKENSHI

  Step-out detection, closed loop switchable by switch
  
  [Features]
  · Step-out detection and closed loop mode can be toggled by switch.
  · Step-out detection possible (synchronization loss detection mode) using open loop control.
  · Equipped with step-out prevention function (closed loop mode) using closed-loop control.
  · Motor startup with speed filter, vibration reduction possible at stopping time.
  · 4 step resolution (400, 800, 1600, 3200P/R).
  · 13 step current setting: 0.6 to 3.0A
  · Abundant protection functions (excess heat, excess regeneration, low voltage, excess load and speed).
  · Input power supply: DC24V.
  · Auto power down function.

  Standard Price:	SGD 397.41
  Days to Ship:	9 Day(s) or more

• 

  Servo Screwdriver & Stepper Motor Set CSB-BZ Series

  SHINANOKENSHI

  
  ● Closed loop servo drive
  ● Low noise, low vibration, and low heat generation across the entire speed range
  ● Thin DIN rail mounted driver
  ● 4-stage resolution settings (500, 1,000, 5,000, 10,000 p/r)
  ● Various Protection Functions
  ● Input Power Supply: 24 VDC
  ● The speed filter enables smooth acceleration and deceleration
  ● Easy 6-stage gain settings

  CAD ：

  2D / 3D

  Standard Price:	SGD 738.58
  Days to Ship:	9 Day(s) or more

Loading...