Conveyer Rollers（Type：Long Roller）

• 

  Conveyor Rollers-Metal/Steel

  MISUMI

  Roller for metal conveyor with bearing. Materials can be selected from steel, aluminum alloy, and stainless steel (SUS304).

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Conveyor Rollers - Shaft & Roller Sets

  MISUMI

  This is a set of conveyor rollers and shafts. The pipe shaft and pins required for installation are included as a set, reducing the hassle of arranging parts.
  The conveyor rollers, pipe shafts, and pins are all made of steel, and the surface treatment is trivalent chromate.
  For roller strength, please refer to the specification table.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 12.46-
  Days to Ship:	Same day or more

• 

  Motor Rollers-Built in Motor

  MISUMI

  Unlike regular rollers, this conveyor roller has a built-in motor and reducer. Since there is no need to provide a separate motor space, it helps save space in automatic conveyance equipment.

  CAD ：

  2D / 3D

  Days to Ship:	8 Day(s) or more

• 

  MDR Brushless Standard Motor PM500FE

  ITOUDENKI

  Pipe diameter ⌀50 roller.
  [Features]
  ·Energy saving power consumption 60+α.
  ·Run-on-demand transport that drives only the parts that are needed when needed reduces power consumption by up to 60% compared to the drive method that uses a single external AC motor.
  ·Achieves high torque and high speed transfer.
  ·Creating a safe and comfortable space. The power supply is a 24 V DC safe low-voltage power supply that does not pose a risk of electric shock.
  ·Excellent controllability (speed control, stopping accuracy, constant speed transport).
  ·Achieved programless operation without PLC.
  ·connection with network systems.
  ·Significant reduction in total cost. Reduce power consumption with energy-saving transportation and airless.

  Standard Price:	SGD 293.45-
  Days to Ship:	18 Day(s) or more

• 

  Conveyor Rollers-Urethane Lined Type

  MISUMI

  Urethane lined conveyor roller with bearing. The core metal material can be selected from steel, aluminum alloy, and stainless steel (SUS304).
  Please refer to the specification table for roller strength.
  The shore (hardness) of urethane is A90, A70, A50, and the color is natural. Urethane thickness can be selected from 3, 4, and 5.
  A90 is ether urethane, A50/A70 is ester urethane.
  Additionally, the urethane of Shore A90 can be changed to antistatic urethane through additional machining (UDC).

  CAD ：

  2D / 3D

  Days to Ship:	8 Day(s) or more

• 

  Miniature Rollers for Conveyors

  MISUMI

  Conveyor roller with bearing. You can choose from two types of material: steel or stainless steel.
  For steel type, surface treatment can be selected from trivalent chromate or hard chrome plating.
  Please use MISUMI's conveyor roller shaft and snap pin for the installation shaft.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 8.25-
  Days to Ship:	Same day or more

• 

  Free Roller for Light Loads (30 kg or Less)

  ITOUDENKI

  [Features]·For light duties (30 kg or less). [Materials]·STKM.

  Standard Price:	SGD 70.44-
  Days to Ship:	4 Day(s) or more

• 

  Conveyor Rollers-Plastic

  MISUMI

  This is a resin type conveyor roller. The material of the roller is polyacetal.
  You can specify the total length in 1mm increments up to a maximum of 513mm.
  Please use MISUMI's conveyor roller shaft and snap pin for the installation shaft.

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

• 

  Steel rollers (rollers for conveyors) S series (S-5714NB)

  MAKITECH

  φ57 roller which employs a standard bearing and boss integration for quiet operation and high durability. Roller unit of the S-5714NB roller conveyor.

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  Roller with Sprocket

  MISUMI

  Conveyor roller with sprocket. The material of the roller is steel, and the material of the sprocket is S45C.
  The number of sprocket teeth is 10, and the compatible chain is CHE40. The length of the roller part can be selected from 100, 200, 300, 400, and 500. Manufacturer recommended axis: Φ11.9 (+0,-0.1)

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Steel Roller Unit (Conveyor Roller), Diameter ø60.5 × Width 90-990 (MR Model)

  OKURA

  Heavy duty steel roller. Transport distance and roller width can be specified within the range of 90 - 990 mm.

  Standard Price:	SGD 21.05-
  Days to Ship:	7 Day(s) or more

• 

  Motor Roller PSM Type

  OKURA

  ø60.5, standard type, roller width 305 to 990 mm can be specified.
  [Features]
  ・ A general-purpose type motor roller that has the same diameter (ø60.5) as the MR type free roller and is compatible.
  ・ A wide range of specifications such as roller width and speed are available to support various operating conditions such as continuous operation and intermittent operation.
  ・ It includes terminal block and detent bracket.

  Standard Price:	SGD 311.30-
  Days to Ship:	14 Day(s) or more

• 

  Single Unit Stainless Steel Roller (Roller for Conveyor), Diameter ⌀57 × Width 90 - 690 (SRS Type)

  OKURA

  Roller diameter of ⌀57 for use with moderate loads. Transport distance and roller width can be specified within the range of 90 - 690 mm.

  Standard Price:	SGD 72.38-
  Days to Ship:	5 Day(s) or more

• 

  Conveyor Roller (for Medium/Heavy　Load) SERIES FF3

  FUJI SEISAKUSHO

  Highly functional multi-purpose plastic conveyor rollers with improved dustproof and waterproof performance, as well as excellent impact resistance and sound deadening properties.
  [Features]
  ·For medium and heavy loads. A double labyrinth seal is used for the seal part.
  ·Press bearings (steel, stainless steel) and precision bearings (6002ZZ) are available.
  ·In addition, the tube material can be selected from hard polyvinyl chloride (PVC) and steel (ST), which have excellent impact resistance, depending on the application.
  ·The diameter can be selected from ⌀50, 51, 57, and 61 mm (diameters of 50, 51, 57, and 61 mm) according to the application.
  [Applications]
  ·Ideal for small packages, bottles, cans, foods, newspapers, magazines, textiles, lightweight cartons, and other lightweight items.
  ·Because it contains bearings, it can rotate more smoothly.
  ·Because it uses a double labyrinth seal, it is durable even in dusty and watery environments.

  Standard Price:	SGD 38.30-
  Days to Ship:	12 Day(s) or more

• 

  MDR Brushless Standard Motor PM605FE

  ITOUDENKI

  [Features]·Pipe diameter ø60.5 roller. ·Thickness is t3.2.

  Standard Price:	SGD 306.03-
  Days to Ship:	18 Day(s) or more

• 

  Return Roller R Type

  JAPAN ROLLER

  One of the most widely used JIS standard steel tube roller. Roller that supports the belt on the return side.

  Standard Price:	SGD 108.86-
  Days to Ship:	13 Day(s) or more

• 

  Motor Roller PSS Type

  OKURA

  ø57 standard type roller width from 305 up to 990 mm can be specified.
  [Features]
  ・ This is a compatible general-purpose motor roller with the same diameter (ø57) as the SR type free roller.
  ・ A wide range of specifications such as roller width and speed are available to support various operating conditions such as continuous operation and intermittent operation.

  Standard Price:	SGD 294.00-
  Days to Ship:	13 Day(s) or more

• 

  Steel Roller Unit (Conveyor Roller), Diameter ø38 × Width 90-690 (QR Model)

  OKURA

  Stronger version of type FR. Transport distance and roller width can be specified within the range of 90 - 690 mm.

  Standard Price:	SGD 15.29-
  Days to Ship:	4 Day(s) or more

• 

  Plastic Roller, M Series (JR-1230), Diameter φ12 × Width 50 - 200

  MAKITECH

  Superfine φ12 Resin Roller. Roller unit parts for JR-1230 roller conveyor, suitable for small item transport.
  
  [Features]
  · The roller diameter is φ12. The minimum roller interval is P15.
  · The standard of the roller width (nominal) is 50W to 200W at intervals of 50mm.
  · By adopting a block methodology and incorporating a stainless steel ball into the intermediate element (joint) for 100W or above rollers, roller pipe and shaft deflection are decreased, achieving smooth rotation.
  · Aluminum extrusion

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  Stainless Steel Roller, M Series (RS-5715), Diameter φ 57 × Width 100 - 899

  MAKITECH

  φ 57 Stainless steel roller. Individual roller for RS-5715 moderate load roller conveyor.
  
  [Features]
  · The roller diameter is 57.0 mm. The minimum roller interval is P75.
  · The standard of the roller width (nominal) is 100 to 800 mm at intervals of 50 mm.
  · Configurable size is available.
  · Standard bearing: high quality.

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  Steel rollers (rollers for conveyors) M series (R-5721NB)

  MAKITECH

  φ 57 mm, T2.6 roller which employs a standard bearing for quiet operation and high durability. Roller unit of the R-5721NB roller conveyor.
  
  [Features]
  · Easy to install thanks to the bearing and resin integrated boss.
  · Silent type.
  · High durability thanks to standard bearing.

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  Steel rollers (rollers for conveyors) M series (RH-5721P)

  MAKITECH

  A medium-load ⌀ 57-mm/t=2.1 mm steel roller. A drop-in frame type, easy-to-replace roller. A single roller unit for the RH-5721P roller conveyor.
  
  [Features]
  · The roller diameter is ⌀ 57.2 mm. The wall thickness t=2.1 mm. Improved impact resistance. The minimum roller interval is P75.
  · The standard roller width (nominal) is 100–1000 mm in increments of 50 mm.
  · A press bearing, economical type roller.
  · A type 90 frame drop-in roller.

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  MDR, DC Brushless Standard Motor ø57

  ITOUDENKI

  Roller with a pipe diameter of ø57.
  [Features]
  · Energy-saving on power consumption of up to 60%.
  · Run-on-demand transport drives only the necessary parts of the line when needed, reducing electrical energy consumption by up to 60% compared to the drive system of a single externally installed AC motor. Moreover, thanks to its airless effect, you can expect energy savings.
  · Achieves high torque and high-speed transportation.
  · Creates a safe and comfortable space. The 24 V DC power supply is a safe low-voltage power supply which means there is no danger from electrocution accidents.
  · Excellent control (speed control, stopping accuracy and fixed speed transportation).
  · Achieves a non-program environment without needing PLC.
  · Connects to network systems.
  · Drastically reduces total costs. Reduces power consumption by using energy saving transportation and airlessness.

  Standard Price:	SGD 280.88-
  Days to Ship:	18 Day(s) or more

• 

  Roller with Shaft (Stainless Steel)

  TRUSCO NAKAYAMA

  [Features]
  - This is a roller that can be installed as a roller replacement for conveyors of different manufacturers by adjusting the included collar.
  The 38 mm roller is for light loads and 60.5 mm for moderate loads, all-stainless steel rollers. Water and chemical resistant.

  Standard Price:	SGD 58.62-
  Days to Ship:	10 Day(s)

• 

  Motor Roller PSS-E Type

  OKURA

  ø57 drive
  ・ Free type, roller width 390 to 990 mm can be specified.
  [Features]
  ・ It is a roller that can be used as a motor roller when energized (power supply on ) and as a free roller when not energized (power supply off).
  ・ It includes terminal block and detent bracket.

  Standard Price:	SGD 306.35-
  Days to Ship:	14 Day(s) or more

• 

  Steel roller (conveyor roller) M Series (R-5726) diameter φ 57.2 x width 100-1000

  MAKITECH

  Heavy load φ57 / t2.6 thickness / φ17 axial diameter steel roller with enhanced shock resistance. Roller unit of the R-5726 roller conveyor.
  
  [Features]
  · The roller diameter is φ57.2. The thickness is t2.6. The shock resistance is improved versus the R-5723. The minimum roller interval is P75.
  · Standard roller width (nominal) is 100W to 1000W in 50mm increments.
  · Machined bearings, high quality.
  · 90 type frame, standard type

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  AC Roller for Medium and Light Loads, ø48.6

  ITOUDENKI

  [Features]·ø48.6 roller for medium and light duties. ·Thickness is t1.4.

  Standard Price:	SGD 236.87
  Days to Ship:	66 Day(s) or more

• 

  Motor Roller PHM Type

  OKURA

  ø60.5, standard type, roller width 305 to 990 mm can be specified.
  [Features]
  ・ A high torque type with approx. 1.5 times the driving force of PSM.
  ・ It includes terminal block and detent bracket.

  Standard Price:	SGD 347.11-
  Days to Ship:	21 Day(s) or more

• 

  Single Unit Aluminum Roller (Roller for Conveyor), Diameter ⌀18.1 × Width 100 - 500 (EAR Type)

  OKURA

  Optimal for small item transport. Transport distance and roller width can be specified within the range of 100 - 500 mm.

  Standard Price:	SGD 17.77-
  Days to Ship:	5 Day(s) or more

• 

  Aluminum Roller Unit (Roller For Conveyor), Resin Bearing Type, Diameter ø42 × Width 240-490 (ZAR Type)

  OKURA

  [Features]
  · Low noise type with resin bearings.
  · Conveyor length and roller width within the range of 240 to 490 mm can be specified.

  Standard Price:	SGD 23.25-
  Days to Ship:	5 Day(s) or more

• 

  Single Unit Aluminum Roller (Roller for Conveyor) Resin Bearing Type (Stainless Steel Shaft), Diameter ⌀42 × Width 240 - 490 (ZARS Type)

  OKURA

  Water resistant, low noise type with resin bearings. Stainless steel shaft. Transport distance and roller width can be specified within the range of 240 - 490 mm.

  Standard Price:	SGD 34.21-
  Days to Ship:	7 Day(s) or more

• 

  Single Unit Aluminum Roller (Roller for Conveyor), Diameter ⌀25.4 × Width 90 - 490 (KR Type)

  OKURA

  [Features]
  • Best suited for transport of lightweight, small items.
  • Transport lengths and roller width can be specified within the range of 90 - 490 mm.

  Standard Price:	SGD 13.09-
  Days to Ship:	7 Day(s) or more

• 

  Single Unit Steel Roller (Roller for Conveyor), Diameter ⌀32 × Width 90 - 620 (FR Type)

  OKURA

  More economical than KR when work dimensions are 150 mm or less. Transport distance and roller width can be specified within the range of 90 - 620 mm.

  Standard Price:	SGD 13.09-
  Days to Ship:	7 Day(s) or more

• 

  Motor Roller, Accumulator Type, Diameter ⌀57 × Width 240 - 990 (PAS Type)

  OKURA

  Can be held for long periods while still energized. Transport distance and roller width can be specified within the range of 240 – 990 mm.
  
  [Features]
  • With a built-in high impedance, low-current motor and inhibition of lock (holding) current to levels comparable to a PWS no-load current, this product is optimal for accumulator lines which are held for a long period of time while energized.

  Standard Price:	SGD 263.07
  Days to Ship:	16 Day(s) or more

• 

  Aluminum Roller (Roller For Conveyor), M Series (RA-2816) Diameter φ28.6 × Width 100 - 500

  MAKITECH

  Small-diameter φ28 aluminum roller. Individual roller for RA-2816 roller conveyor, a lightweight conveyor; suitable for small item transport.
  
  [Features]
  · The roller diameter is φ28.6. The minimum roller interval is P40.
  · Standard roller width (nominal) is 100W to 500W in 50mm increments.
  · Machined bearings, high quality

  Days to Ship:	8 Day(s) or more

• 

  Stainless Steel Roller, S Series (SS-4212), Diameter φ 42.7 × Width 90 - 790

  MAKITECH

  [Features]
  - φ42 stainless steel roller.
  Individual roller for SS-4212 moderate load roller conveyor.

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  Steel Roller (Conveyor Roller) M Series (R-3812PD)

  MAKITECH

  R-3812P with adjustable roller width. The width can be specified in 1 mm increments from 100 to 1000 mm. Roller unit of the R-3812PD roller conveyor.
  
  [Features]
  · The roller diameter is φ38.1. The minimum roller interval is P50.
  · Standard roller width (nominal) is 100W to 1000W in 50mm increments.
  · Can be manufactured in desired size.
  · Pressed-in bearing, inexpensive type.
  · Model 60 frame standard type

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

• 

  Steel Roller (Roller for Conveyor); M Series (R-3816), Diameter φ 38.1 × Roller Width 100 - 1000

  MAKITECH

  Moderate to light load φ38 / thickness t1.6 steel roller with enhanced shock resistance and strength. Roller unit of the R-3816 roller conveyor. The widths can be specified in 1 mm increments from 100 to 1000 mm.
  
  [Features]
  · The roller diameter is φ38.1. The thickness is t1.6. The shock resistance is improved. The minimum roller interval is P50.
  · Standard roller width (nominal) is 100W to 1000W in 50mm increments.
  · Can be manufactured to desired size.
  · Machined bearings, high quality.
  · Model 60 frame standard type

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  Steel roller (conveyor roller) M Series (R-5714PD) diameter φ 57.2 x width 100-1000

  MAKITECH

  R-5714P with adjustable roller width. The widths can be specified in 1 mm increments from 100 to 1000 mm. Roller unit of the R-5714PD roller conveyor.
  
  [Features]
  · The roller diameter is φ57.2. The minimum roller interval is P75.
  · Standard roller width (nominal) is 100W to 1000W in 50mm increments.
  · Can be manufactured to desired size.
  · Pressed-in bearing and inexpensive type.
  · Model 90 frame standard type

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  Steel roller (conveyor roller) M Series (R-5714) diameter φ 57.2 x width 100-1000

  MAKITECH

  A moderate load φ57 steel roller which is well-suited to high-quality inclined transport due to the use of machined bearings. Roller unit of the R-5714 roller conveyor.
  
  [Features]
  · The roller diameter is φ57.2. The minimum roller interval is P75.
  · Standard roller width (nominal) is 100W to 1000W in 50mm increments.
  · Machined bearings, high quality.
  · Model 90 frame standard type

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  Steel roller (conveyor roller) M Series (R-5721D) diameter φ 57.2 x width 100-1000

  MAKITECH

  R-5721 with adjustable roller width. The widths can be specified in 1 mm increments from 100 to 1, 000 mm. Roller unit of the R-5721D roller conveyor.
  
  [Features]
  · Improved shock resistance.
  · The roller diameter is 57.2 mm. The thickness is T2.1. The minimum roller interval is P75.
  · The standard roller width (nominal) is 100 to 1, 000 mm at intervals of 50 mm.
  · Configurable size is available.
  · Machined bearings: high quality.
  · Model 90 frame standard type.

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  Steel roller (conveyor roller) M Series (R-5723) diameter φ 57.2 x width 100-1000

  MAKITECH

  Heavy duty φ57 steel roller which is highly versatile. Roller unit of the R-5723 roller conveyor.
  
  [Features]
  - Roller diameter φ57.2; thickness t2.3; heavy duty with a high level of versatility.
  · Minimum roller interval is P75.
  · The standard of the roller width (nominal) is 100W to 1, 000W at intervals of 50mm.
  · Machined bearings, high quality.
  · Model 90 frame standard type

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  Steel rollers (rollers for conveyors) M series (R-4832NB)

  MAKITECH

  φ 48 mm, T3.5 roller which employs a standard bearing for quiet operation and high durability. Roller unit of the R-4832NB roller conveyor. The widths can be specified in 1 mm increments from 100 to 1, 000 mm.
  
  [Features]
  · Easy to install thanks to the bearing and resin integrated boss.
  · Silent type.
  · High durability thanks to standard bearing.

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  Stainless steel roller (conveyor roller) M Series (RS-6015) diameter φ 60.5 x width100-1000

  MAKITECH

  A resin flanged φ 60 stainless steel roller for moderate to light loads. Replaceable bearings. Roller unit of the RS-6015 roller conveyor. The widths can be specified in 1 mm increments from 100 to 1, 000 mm.
  
  [Features]
  · The roller diameter is 60.5 mm. The minimum roller interval is P75.
  · The standard of the roller width (nominal) is 100 to 800 mm at intervals of 50 mm.
  · Configurable size is available.
  · Standard bearing: high quality.

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  Stainless steel roller (conveyor roller) M Series (ARS-6015) diameter φ 60.5 x width100-1000

  MAKITECH

  Cost effective type φ60 stainless steel roller for moderate to light loads. Roller unit of the ARS-6015 roller conveyor. Widths can be specified in 1 mm increments from 100-1, 000 mm.
  
  [Features]
  • • Roller diameter is φ60.5. Minimum roller spacing is P75.
  • Standard roller width (nominal) is100W to 800W at intervals of 50mm.
  • Configurable size is available.
  • Press-in bearing and inexpensive type

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

Loading...