Conveyer Timing Belts

• • Recommendation

  

  MiSUMi Economy

  Closed Belts S Type

  MISUMI

  -Closed Belts S Type from MISUMI.
  -This product series has 2 types available, C-LTBJA (Standard type) and C-LTBRA (Both Sides Cloth Lined).
  -This is an economy item; The price is cheaper than the MISUMI standard product.
  -The material of the timing belt is made of urethane with steel core wire.
  -The allowable operating temperature range is -20 ~ 60°C. (Reference Value)
  -Urethane belts may change color over time, but will not be affected to strength, etc.
  

  CAD ：

  2D / 3D

  Days to Ship:	8 Day(s)

• • Recommendation

  

  MiSUMi Economy

  Closed Belts T Type

  MISUMI

  -Closed Belts T Type from MISUMI.
  -This product series has 2 types available, C-LTBJA (Standard type) and C-LTBRA (Both Sides Cloth Lined).
  -This is an economy item; The price is cheaper than the MISUMI standard product.
  -The material of the timing belt is made of urethane with steel core wire.
  -The allowable operating temperature range is -20 ~ 60°C. (Reference Value)
  -Urethane belts may change color over time, but will not be affected to strength, etc.
  

  CAD ：

  2D / 3D

  Days to Ship:	8 Day(s)

• 

  Timing Belts with Attachments-T5/T10

  MISUMI

  - Timing Belts with Attachments-T5/T10, ATBT series from MISUMI.
  - Attachments are thermally bonded to the backside of the Timing Belt enabling constant pitch conveyance of various work pieces.
  - The allowable operating temperature range is -20 ~ 70°C. (Reference Value)
  - Attachment is mounted on the backside above the belt teeth.
  - The jointing process reduces allowable tension to approx. 50% of Open-End Belts.
  - If the attachments are to receive vibrations or large loads, test the applicability before using.
  

  CAD ：

  2D / 3D

  Days to Ship:	11 Day(s) or more

• 

  Long Timing Belts-Iron Rubber/Standard/Tooth Surface Cloth Lined/Backside Cloth Lined/Both Side Cloth Lined

  MISUMI

  - Long Timing Belts-Iron Rubber / Standard / Tooth Surface Cloth Lined/Backside Cloth Lined/Both Side Cloth Lined from MISUMI.
  - The belt length is selectable as desired, and suitable for a long span synchronous conveyance.
  - The Iron Rubber Type with good allowable tension.
  - Jointing Process is open ended belts are made endless by thermal bonding process.
  - Core wires of the joint part are not connected.
  - The allowable operating temperature range 0~80°C (Reference Value)
  

  CAD ：

  2D / 3D

  Days to Ship:	7 Day(s) or more

• 

  Long Timing Belts-Standard/Backside Cloth Lined/Both Sides Cloth Lined

  MISUMI

  - Long Timing Belts-Standard/Backside Cloth Lined/Both Sides Cloth Lined from MISUMI.
  - The belt length is selectable as desired, and suitable for a long span synchronous conveyance.
  - Jointing Process is open ended belts are made endless by thermal bonding process.
  - Core wires of the joint part are not connected.
  - Features of Cloth Lined Belts: For backside cloth lined, reduces friction coefficient of conveyed items and is suitable for accumulation conveyance. For both sides cloth lined, reduces friction coefficient between conveyed materials and pulleys and cuts noise.
  

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  HabaSYNC AT10 Type

  HABASIT

  -Timing belt, HabaSYNC AT10 Type from HABASIT.
  -HabaSYNC AT10 type has 2 shapes available, Closed end and Open end.
  -Metric pitch special trapezoidal tooth profile, suitable for transport applications and linear drive applications that require high loads and high torque.
  -The maximum belt width (150 mm / 6 inch).
  -The number of teeth can be configured from 30 to 9999 teeth (1 teeth incremental).
  -Superior backlash control.
  

  Days to Ship:	10 Day(s) or more

• 

  MiSUMi Economy

  Closed Belts XL/L/ H Type

  MISUMI

  - Closed Belts XL/L/ H series from MISUMI.
  -Adopting cross tapping process, increase the belt contact area at the connection to improve the connection strength.
  -Unique steel wire arrangement, it can be assured to avoid cutting the steel wire core during width cutting.
  -Cutting equipment is used for standard / both sides cloth lined type. Ensure that complete sealing edge will not produce the side roughness caused by the secondary manual trimming.
  

  CAD ：

  2D / 3D

  Days to Ship:	8 Day(s)

• 

  HabaSYNC T10 Type

  HABASIT

  -Timing belt, HabaSYNC T10 Type from HABASIT.
  -HabaSYNC T10 type has 2 shapes available, Closed end and Open end.
  -The maximum belt width (150 mm / 6 inch).
  -The number of teeth can be configured from 30 to 9999 teeth (1 teeth incremental).
  -Inch pitch trapezoidal tooth profile, suitable for general transport applications.
  -This product is in compliance with relevant EU and/or US food contact requirements.
  

  Days to Ship:	10 Day(s) or more

• 

  HabaSYNC T5 Type Anti-Static Function

  HABASIT

  -Timing belt, HabaSYNC T5 Type, Anti-Static Function from HABASIT.
  -Timing belt, HabaSYNC T5 Type is Open-end Timing Belts with steel wire core.
  -Metric pitch trapezoidal tooth profile with both surfaces covered with woven fabric that is kneaded with carbon black and exhibits an anti-static function.
  -The maximum belt width (150 mm / 6 inch).
  -The number of teeth can be configured from 60 to 9999 teeth (1 teeth incremental).
  

  Days to Ship:	12 Day(s) or more

• 

  HabaSYNC AT5 Type

  HABASIT

  -Timing belt, HabaSYNC AT5 Type from HABASIT.
  -HabaSYNC AT5 type has 2 shapes available, Closed end and Open end.
  -Metric pitch special trapezoidal tooth profile, suitable for transport applications and linear drive applications that require high loads and high torque.
  -The maximum belt width (150 mm / 6 inch).
  -The number of teeth can be configured from 60 to 9999 teeth (1 teeth incremental).
  -Superior backlash control.
  

  Days to Ship:	10 Day(s) or more

• 

  HabaSYNC T10 Type, Both Sides Cloth Lined

  HABASIT

  Metric pitch trapezoidal tooth profile with both surfaces covered with polyamide woven fabric, which prevents engagement interference and increases quietness and retentivity.

  Days to Ship:	10 Day(s) or more

• 

  HabaSYNC H Type

  HABASIT

  -Timing belt, HabaSYNC, H type from HABASIT.
  -HabaSYNC H type has 2 shapes available, Closed end and Open end.
  -The maximum belt width is 600 mm.
  -The number of teeth can be configured from 24 to 7870 teeth (1 teeth incremental).
  -Inch pitch trapezoidal tooth profile, suitable for general transport applications.
  -This product is in compliance with relevant EU and/or US food contact requirements.
  

  Days to Ship:	10 Day(s) or more

• 

  HabaSYNC T5 Type

  HABASIT

  -Timing belt, HabaSYNC T5 Type from HABASIT.
  -HabaSYNC T5 type has 2 shapes available, Closed end and Open end.
  -The maximum belt width (150 mm / 6 inch).
  -The number of teeth can be configured from 60 to 9999 teeth (1 teeth incremental).
  -Inch pitch trapezoidal tooth profile, suitable for general transport applications.
  -This product is in compliance with relevant EU and/or US food contact requirements.
  

  Days to Ship:	10 Day(s) or more

• 

  HabaSYNC T20 Type

  HABASIT

  -Timing belt, HabaSYNC T20 Type from HABASIT.
  -HabaSYNC T20 type has 2 shapes available, Closed end and Open end.
  -The maximum belt width (150 mm / 6 inch).
  -The number of teeth can be configured from 15 to 9999 teeth (1 teeth incremental).
  -Inch pitch trapezoidal tooth profile, suitable for general transport applications.
  -This product is in compliance with relevant EU and/or US food contact requirements.
  

  Days to Ship:	13 Day(s) or more

• 

  HabaSYNC AT5 Type Double-Sided Fabric Coated

  HABASIT

  Metric pitch special trapezoidal tooth profile, suitable for transport applications and linear drive applications that require high loads and high torque. Both sides are coated with polyamide woven fabric, which prevents engagement interference and increases quietness and retentivity.

  Days to Ship:	10 Day(s) or more

• 

  HabaSYNC AT10 Type Double-Sided Fabric Coated

  HABASIT

  Metric pitch special trapezoidal tooth profile, suitable for transport applications and linear drive applications that require high loads and high torque. Both sides are coated with polyamide woven fabric, which prevents engagement interference and increases quietness and retentivity.

  Days to Ship:	13 Day(s) or more

• 

  MiSUMi Economy

  Closed Belts HTD Type

  MISUMI

  -Closed Belts, HTD Type from MISUMI.
  -Adopting cross tapping process, increase the belt contact area at the connection to improve the connection strength.
  -Unique steel wire arrangement, it can be assured to avoid cutting the steel wire core during width cutting.
  -Cutting equipment is used for standard / both sides cloth lined type. Ensure that complete sealing edge will not produce the side roughness caused by the secondary manual trimming.
  

  CAD ：

  2D / 3D

  Days to Ship:	8 Day(s)

• 

  HabaSYNC HTD5M Type

  HABASIT

  -Timing belt, HabaSYNC HTD5M Type from HABASIT.
  -HTD type arc tooth profile, suitable for transport applications and linear drive applications that require high loads and high torque.
  -The maximum belt width (150 mm / 6 inch).
  -The number of teeth can be configured from 60 to 9999 teeth (1 teeth incremental).
  -Increased tooth depth for high torque transmission and precise positioning.
  -Low noise and vibration level.
  

  Days to Ship:	10 Day(s) or more

• 

  HabaSYNC HTD14M Type, Tooth Surfaces Cloth Lined

  HABASIT

  HTD type arc tooth profile, suitable for transport applications and linear drive applications that require high loads and high torque. Tooth surfaces are coated with polyamide woven fabric, which prevents engagement interference and increases quietness.

  Days to Ship:	10 Day(s) or more

• 

  HabaSYNC T10 Type Tooth-Sided Fabric Coated

  HABASIT

  -Timing belt, HabaSYNC T10 Type Tooth-Sided Fabric Coated from HABASIT.
  -Metric pitch trapezoidal tooth profile with tooth surfaces covered with polyamide woven fabric, which prevents engagement interference and increases quietness.
  -HabaSYNC T10 type has 2 shapes available, Closed end and Open end.
  -The maximum belt width (150 mm / 6 inch).
  -The number of teeth can be configured from 30 to 9999 teeth (1 teeth incremental).
  

  Days to Ship:	10 Day(s) or more

• 

  HabaSYNC HTD8M Type

  HABASIT

  -Timing belt, HabaSYNC HTD8M Type from HABASIT.
  -HTD type arc tooth profile, suitable for transport applications and linear drive applications that require high loads and high torque.
  -The maximum belt width (150 mm / 6 inch).
  -The number of teeth can be configured from 60 to 9999 teeth (1 teeth incremental).
  -Increased tooth depth for high torque transmission and precise positioning.
  -Low noise and vibration level.
  

  Days to Ship:	13 Day(s) or more

• 

  HabaSYNC HTD14M Type

  HABASIT

  -Timing belt, HabaSYNC HTD14M Type from HABASIT.
  -HTD type arc tooth profile, suitable for transport applications and linear drive applications that require high loads and high torque.
  -The maximum belt width (150 mm / 6 inch).
  -The number of teeth can be configured from 22 to 3550 teeth (1 teeth incremental).
  -Increased tooth depth for high torque transmission and precise positioning.
  -Low noise and vibration level.
  

  Days to Ship:	13 Day(s) or more

• 

  HabaSYNC HTD8M Type Tooth-Sided Fabric Coated

  HABASIT

  HTD type arc tooth profile, suitable for transport applications and linear drive applications that require high loads and high torque. Tooth surfaces are coated with polyamide woven fabric, which prevents engagement interference and increases quietness.

  Days to Ship:	10 Day(s) or more

• 

  HabaSYNC XL Type

  HABASIT

  -Timing belt, HabaSYNC, XL type from HABASIT.
  -HabaSYNC XL type has 2 shapes available, Closed end and Open end.
  -The maximum belt width (150 mm / 6 inch).
  -The number of teeth can be configured from 60 to 9999 teeth (1 teeth incremental).
  -Inch pitch trapezoidal tooth profile, suitable for general transport applications.
  -This product is in compliance with relevant EU and/or US food contact requirements.
  

  Days to Ship:	10 Day(s) or more

• 

  HabaSYNC X Type

  HABASIT

  -Timing belt, HabaSYNC X Type from HABASIT.
  -HabaSYNC X type is Open-end Timing Belts with Standard steel wire core.
  -The maximum belt width (150 mm / 6 inch).
  -The number of teeth can be configured from 14 to 2200 teeth (1 teeth incremental).
  -Inch pitch trapezoidal tooth profile, suitable for general transport applications.
  -The ultimate tensile strength (or breaking strength) for the widest slitting width mentioned above is 15780 N.
  

  Days to Ship:	10 Day(s) or more

• 

  HabaSYNC L Type

  HABASIT

  -Timing belt, HabaSYNC L Type from HABASIT.
  -HabaSYNC L type has 2 shapes available, Closed end and Open end.
  -The maximum belt width (150 mm / 6 inch).
  -The number of teeth can be configured from 32 to 9999 teeth (1 teeth incremental).
  -Inch pitch trapezoidal tooth profile, suitable for general transport applications.
  -This product is in compliance with relevant EU and/or US food contact requirements.
  

  Days to Ship:	10 Day(s) or more

• 

  Habashinku H type Tooth Surface Cloth Lined

  HABASIT

  -Timing belt, HabaSYNC H type Tooth Surface Cloth Lined from HABASIT.
  -Inch pitch trapezoidal tooth profile with tooth surfaces covered with polyamide woven fabric, which prevents engagement interference and increases quietness.
  -HabaSYNC H type has 2 shapes available, Closed end and Open end.
  -The maximum belt width is 600 mm.
  -The number of teeth can be configured from 24 to 7870 teeth (1 teeth incremental).
  

  Days to Ship:	13 Day(s) or more

• 

  HabaSYNC T5 Type, Compliant with FDA

  HABASIT

  -Timing belt, HabaSYNC T5 Type, Compliant with FDA from HABASIT.
  -HabaSYNC T5 type has 2 shapes available, Closed end and Open end.
  -Metric pitch trapezoidal tooth profile, FDA (United States Food and Drug Administration) compliant, suitable for transport of dry heated food products.
  -The maximum belt width (150 mm / 6 inch).
  -The number of teeth can be configured from 60 to 9999 teeth (1 teeth incremental).
  

  Days to Ship:	10 Day(s) or more

• 

  HabaSYNC T5 Type Double-Sided Fabric Coated

  HABASIT

  -Timing belt, HabaSYNC T5 Type Double-Sided Fabric Coated from HABASIT.
  -Metric pitch trapezoidal tooth profile with both surfaces covered with polyamide woven fabric, which prevents engagement interference and increases quietness and retentivity.
  -HabaSYNC T5 type has 2 shapes available, Closed end and Open end.
  -The maximum belt width (150 mm / 6 inch).
  -The number of teeth can be configured from 60 to 9999 teeth (1 teeth incremental).
  

  Days to Ship:	10 Day(s) or more

• 

  HabaSYNC AT20 Type

  HABASIT

  -Timing belt, HabaSYNC AT20 Type from HABASIT.
  -HabaSYNC AT20 type has 2 shapes available, Closed end and Open end.
  -Metric pitch special trapezoidal tooth profile, suitable for transport applications and linear drive applications that require high loads and high torque.
  -The maximum belt width (150 mm / 6 inch).
  -The number of teeth can be configured from 15 to 2500 teeth (1 teeth incremental).
  -Superior backlash control.
  

  Days to Ship:	13 Day(s) or more

• 

  HabaSYNC AT10 Type Tooth-Sided Fabric Coated

  HABASIT

  Metric pitch special trapezoidal tooth profile, suitable for transport applications and linear drive applications that require high loads and high torque. Tooth surfaces are coated with polyamide woven fabric, which prevents engagement interference and increases quietness.

  Days to Ship:	13 Day(s) or more

Loading...