Other Cylinders（Rod Operation Method：Single-Rod）

• • On Sale Till 31/03/2025

  

  Mini Free Mount Cylinder CUJ Series, ø4, ø6, ø8, ø10

  SMC

  An air cylinder manufactured by SMC.
  [Features]
  · Miniature body.
  · Concentrates wiring and piping on one side.
  · Allows installation from 4 directions.
  

  CAD ：

  2D / 3D

  Standard Price:	SGD 49.58-
  	Special Price
  Days to Ship:	Same day or more

• • On Sale Till 31/03/2025

  

  Free Mount Cylinder, Double Acting: Single Rod CU Series

  SMC

  An air cylinder manufactured by SMC.
  [Features]
  · A space-saving air cylinder with multiple surfaces capable of direct mounting.
  

  CAD ：

  2D / 3D

  	Special Price
  Days to Ship:	Same day or more

• 

  Lateral Load Resisting Low-Friction Cylinder MQM Series

  SMC

  An air cylinder suitable for all driving ranges, from low pressure, low speed, uniform speed and low friction to high pressure, high speed and high-speed response (high frequency).
  [Features]
  · Covers a range of driving speeds and output controls not possible with standard cylinders thanks to its metal seal structure with minimal sliding resistance.
  · Minimal sliding resistance allows low-pressure actuation at 0.005 MPa.
  · Low- and uniform-speed actuation. Smooth, uniform-speed actuation ranges as low as 0.3 mm/s.
  · Low sliding resistance allows output control in approx. 0.05 N increments. (Based on cylinder piston area × pressure accuracy)
  · No increased sliding resistance after not operating for a long period of time.
  · Long lifespan: Long service life of 10,000 km or 100 million full cycles.
  · Lateral load resistance increased by built-in ball bushing.

  CAD ：

  2D / 3D

  Days to Ship:	32 Day(s) or more

• 

  Stroke Reading Cylinder CE1 Series

  SMC

  An air cylinder manufactured by SMC
  [Features]
  · With length measurement function
  · Measurement is possible for the full cylinder range
  · The home position can be anywhere within the cylinder stroke.
  · Resolution: 0.1 mm (accuracy ±0.2 mm)
  · Power supply voltage: 12 to 24 V DC
  · Abundant stroke variations
  · Improved noise resistance
  

  CAD ：

  2D / 3D

  Days to Ship:	22 Day(s) or more

• 

  Pin Cylinder, Single Acting, Spring Return CJP Series

  SMC

  An air cylinder manufactured by SMC.
  [Features]
  · A short-stroke miniature cylinder with a short full length.
  · · One-touch fitting can be connected.
  · Small and light.

  CAD ：

  2D / 3D

  Standard Price:	SGD 28.93-
  Days to Ship:	Same day or more

• 

  Free Mount Cylinder For Vacuum ZCUK Series

  SMC

  A compact square cylinder with high installation accuracy.
  [Features]
  · CU Series with a vacuum passage in the rod for easy mounting of vacuum pads.
  · Helps save space.
  · Not necessary to provide vacuum tubing space at the end of the rod.
  *See the SMC catalog for specification details.
  *Product pictures are representative images. CAD data is not supported for some model numbers.

  CAD ：

  2D / 3D

  Days to Ship:	32 Day(s) or more

• 

  Stopper Cylinder, Fixed Mounting Height RSQ Series

  SMC

  An air cylinder with abundant rod-end configurations. No mounting brackets required.
  [Features]
  · Female thread types are now available to have on the round bar and chamfered type rod ends.
  · The use of a new body design allows for auto switches to be mounted on the 4 faces.
  · The type can be selected to fit the application.
  · Lever type can be selected to fit the application.
  · Shock absorbers can easily be replaced.
  · 3 mounting methods: Rod end tapped, head end tapped and through hole.
  *See the SMC catalog for specification details.
  *Product pictures are representative images.

  CAD ：

  2D / 3D

  Days to Ship:	32 Day(s) or more

• 

  Heavy Duty Stopper Cylinder RS2H Series

  SMC

  Easily replaced air cylinder shock absorbers.
  [Features]
  · Can be replaced simply by loosening the set screw.
  · The adjustable shock absorber allows for a gentle stop.
  · Resistance value can be adjusted by rotating the adjustment dial.
  · Improved handling and visibility of the lock mechanism. (Option)
  · Piping is available from 2 directions, allowing for interchangeable mounting with previous series (RS1H).
  · Compact auto switch (D-M9□) and strong magnetic field resistant auto switch (D-P3DW) can be mounted on 3 sides.
  · 2 roller materials are available to suit the application. (Resin, carbon steel)
  · The roller lever direction can be changed in 90° steps.

  CAD ：

  2D / 3D

  Days to Ship:	32 Day(s) or more

• 

  Compact Low-Friction Cylinder MQQ Series

  SMC

  A compact low-friction cylinder suitable for low pressures, low speeds, uniform speeds and low friction actuation.
  [Features]
  · Covers a range of actuation speeds and output controls thanks to its metal seal structure with minimal sliding resistance.
  · Its minimal sliding resistance allows for low-pressure actuation at 0.005 MPa.
  · Smooth and uniform-speed actuation ranges as low as 0.3 mm/s.
  · Long lifespan: Long service life of 10,000 km or 100 million full cycles.
  · Lateral load resistance: Features built-in ball bushings in the bearings for improved lateral load resistance. (MQQL)
  · Its low sliding resistance allows output control in approximately 0.05‑N increments. (Based on cylinder piston area × pressure accuracy)
  · No change to sliding resistance, even after extended periods of non-use.

  CAD ：

  2D / 3D

  Days to Ship:	32 Day(s) or more

• 

  Precision Cylinder MTS Series

  SMC

  A precision cylinder with an internal guide function that can be mounted with high accuracy.
  [Features]
  · Deflection: 0.1 mm or less (within the allowable lateral load value of MTS12-25).
  · Requires less mounting space. Reduced labor for design and assembly.
  · Auto switches can be mounted on 4 surfaces (bore size 8 mm: 2 surfaces).
  · 3 types of mounting are possible. Tapped mounting (bottom mounting, front mounting), Through-hole mounting (both sides mounting).
  · 2 types of rod end configuration (Standard: rod end female thread, Option: rod end male thread, using stud bolt).
  · Air cushion available as standard (bore size 8 mm: rubber bumper).
  · Head side end lock type added to series (bore size 12 to 40 mm).
  · The specially configured rod seal design delivers sealing and durability equivalent to conventional round rod models.

  CAD ：

  2D / 3D

  Days to Ship:	32 Day(s) or more

• 

  Space Saving Small Sized Cylinder Series With Vacuum Suction MVC

  CKD

  Small sized cylinder with attached pad at the tip for absorption. The guide rod is equipped with work adsorption unit and empty passage.

  CAD ：

  2D

  Days to Ship:	21 Day(s) or more

• 

  Free Mount Cylinder, Non-Rotating Rod Type, Double Acting: Single Rod CUK Series

  SMC

  An air cylinder manufactured by SMC.
  [Features]
  · A space-saving air cylinder with multiple surfaces capable of direct mounting.
  

  CAD ：

  2D / 3D

  Days to Ship:	31 Day(s) or more

• 

  Space Saving Type Cartridge Cylinder Series CAT

  CKD

  The outer diameter part of the cylinder is fully-threaded and the size of a thumb. An ultra-compact single-acting cylinder that springs back when pulled.
  [Features]
  ·Ultra compact size: The overall length of the cylinder has been significantly shortened, and the inner diameter is also ultra-compact with ø6 to ø15. It can be installed in a small space to reduce the size of the device.
  ·Easy to install: The outer diameter of the tube is threaded, making it easy to attach to jigs, panels, etc.
  ·2 types of mounting: Recessed type and panel mounting type are available as mounting types. The recessed type is a method of sealing with a seal washer, and does not require O-ring or reamer processing.
  ·1 air pipe: Since it is a single-acting push method, it can be operated with only 1 air pipe.
  ·Selectable end shape: Male thread and non-threaded are available for the end shape of the piston rod. You can choose according to your purpose.

  CAD ：

  2D / 3D

  Standard Price:	SGD 26.49-
  Days to Ship:	4 Day(s) or more

• 

  Barb coupler type ultra-compact cylinder TKY series

  MYOUTOKU

  
  
  [Features]
  Ultra compact and light weight body with push-in fittings that can be mounted directly.
  · The body can be mounted directly.
  · Barb fittings

  Days to Ship:	4 Day(s) or more

• 

  Free Mount Cylinder, Long Stroke Type, Double Acting: Single Rod CU Series

  SMC

  An air cylinder manufactured by SMC.
  [Features]
  · A space-saving air cylinder with multiple surfaces capable of direct mounting.
  

  CAD ：

  2D / 3D

  Days to Ship:	32 Day(s) or more

• 

  Stopper Cylinder, Fixed Mounting Height, Rechargeable Battery Compatible, 25A-RSQ Series

  SMC

  [Features]
  · In order to reduce product defects in the rechargeable battery manufacturing process, materials containing copper (Cu) and zinc (Zn) as main components are not used.
  * Some aluminum alloys and aluminum die-cast materials contain small amounts of copper (Cu) and zinc (Zn) as added elements.
  · No electrolytic nickel plating or zinc plating with copper base is used.
  * Electroless nickel plating is used.
  · Low dew point compatible grease used, can be used at -70°C. Improved performance in low dew point environments.

  Days to Ship:	32 Day(s) or more

• 

  Heavy-Duty Stopper Cylinder RSH Series

  SMC

  Air cylinder with built-in shock absorber to stop pallets gently.
  [Features]
  · Amount of energy absorption can be adjusted to suit the load.
  · Easy replacement of shock absorbers.
  · The roller lever direction can be changed in 90° steps.
  · Side piping (flange) is possible.
  · Bore size 20 mm: Standard stroke 15 mm.
  · Bore size 32 mm: Standard stroke 20 mm.
  *See the manufacturer's catalog for detailed specifications.
  *Product pictures are representations. CAD data is not supported for some model numbers.

  CAD ：

  2D / 3D

  Days to Ship:	32 Day(s) or more

• 

  High Speed Type High Energy Absorbing Cylinder - HCM Series

  CKD

  The cylinder can perform with high speed and undertake high energy absorption. Can be used to remove molded products like resin.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Push-in joint ultra small size cylinder MKY series

  MYOUTOKU

  Ultra compact and light weight body with push -in fittings that can be mounted directly.
  
  [Features]
  · Ultra compact and light weight.
  · Block type cylinder with minimum footprint.
  · The body can be mounted directly.
  · Push- in fittings

  Standard Price:	SGD 38.82-
  Days to Ship:	12 Day(s) or more

• 

  Mini Free Mount Cylinder CUJ Series, ø12, ø16, ø20

  SMC

  An air cylinder manufactured by SMC.
  [Features]
  · Miniature body.
  · Concentrates wiring and piping on one side.
  · With counterbore for mounting.
  

  CAD ：

  2D / 3D

  Standard Price:	SGD 61.02-
  Days to Ship:	31 Day(s) or more

• 

  Improved Water Resistance, Stopper Cylinder, Fixed Mounting Height, RSQ Series

  SMC

  [Features]
  · Suitable for using under the atmosphere having coolant in the machine tools
  · Usable in water-spraying environments such as food machines and car wash machines

  Days to Ship:	Quote

• 

  Free Mount Cylinder, Single Acting, Single Rod, Spring Return/Extend CU Series

  SMC

  Free mount series of compact air cylinders.
  [Features]
  · A space-saving air cylinder with multiple surfaces capable of direct mounting.
  · With auto switch.

  CAD ：

  2D / 3D

  Days to Ship:	32 Day(s) or more

• 

  Free Mount Cylinder, Long Stroke Type, Non-Rotating Rod, Double Acting: Single Rod CUK Series

  SMC

  An air cylinder manufactured by SMC.
  [Features]
  · A space-saving air cylinder with multiple surfaces capable of direct mounting.
  

  CAD ：

  2D / 3D

  Days to Ship:	32 Day(s) or more

• 

  Heavy Duty Stopper Cylinder, Compatible With Rechargeable Batteries, 25A-RSH Series

  SMC

  [Rechargeable battery compatible series]
  Copper (Cu) and zinc (Zn) materials are not used in the rechargeable battery manufacturing process to reduce product defects.
  Some aluminum alloys and die-cast aluminum materials contain small amounts of copper (Cu) and zinc (Zn) as additive elements.
  Electrolytic nickel plating and zinc plating with copper base are not used. (Electroless nickel plating is used.)
  It uses low dew point compatible grease, -70°C compatible, improved performance in low dew point environment.

  Days to Ship:	Quote

Loading...