Rotary Actuators（Torque：10 ~ Less than 20）

• 

  Hi-Rotor/Standard, PRN Series

  KURODA PNEUMATICS

  This is a hi-rotor with flexible mount type that can be mounted in any direction freely, using the mounting holes located on the body.

  CAD ：

  2D

  Standard Price:	SGD 326.73-
  Days to Ship:	7 Day(s) or more

• 

  Rotary Actuator, Vane Type, CRB2 Series

  SMC

  Can be combined freely with many kinds of unit.
  [Features]
  · Piping port parts are located on the flat section.
  · Many variations of shaft-end shape (6 types).
  · Works with the compact auto switch D-M9□ type.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	32 Day(s) or more

• 

  LER Series Electric Rotary Table

  SMC

  Low-profile rotary actuator.
  [Features]
  · Positioning repeatability: ±0.03° (high-precision type).
  · Rotation angle: 320° (310°), 180°, 90°. *The value in parentheses is for the LER10.
  · Shockless / high-speed actuation.
  · Possible to set speed, acceleration/deceleration and positioning up to 64 points.
  · Energy-saving product: Automatic 40% power reduction after the table has stopped.
  · Step motor (servo 24 V DC).

  CAD ：

  2D / 3D

  Days to Ship:	21 Day(s) or more

• 

  Rotary Actuator, Vane Type, CRB1 Series

  SMC

  [Features]
  · Works with the model D-M9□ compact auto switch.
  · Highly reliable.
  & nbspSupports thrust and radial loads and uses bearings.
  · The body can be mounted directly.
  · 2 types of port location; side ported or axial ported.

  CAD ：

  2D / 3D

  Days to Ship:	31 Day(s) or more

• 

  Rotary Table, Rack And Pinion Type, CRA1 Series

  SMC

  [Features]
  · The model D-M9□ compact auto switch can be equipped.
  · Overall width reduced by up to 14 mm.
  · Mountable on 2 surfaces.
  · Auto switch can be mounted from the front.
  · Weight reduced by up to 14%.
  · Mounting compatibility with existing models.
  · The cushion seal is replaceable.
  · Easy adjustment of the cushion valve.
  · The ports, cushion valve and auto switch are all located on the same surface for improved usability.
  · Many variations of shaft type.
  · Can be mounted in a way that is suitable for the operating conditions/environment.

  CAD ：

  2D / 3D

  Days to Ship:	32 Day(s) or more

• 

  Rotary Table, Rack And Pinion Type, MSQ Series (Size 1, 2, 3, 7)

  SMC

  Thin-profile type rotary table unit with low table height.
  [Features]
  · Easy mounting of workpieces.
  · Large rolling element bearings.
  · Angle adjustment range: 0 to 190°.
  · Easy mounting of main body.
  · Uses high precision bearings.
  · Movement in direction of table's radial thrust: 0.01 mm or less.
  · Piping from end or side.
  · Features a space-saving design with a reduced body size and less space required for piping and wiring.

  CAD ：

  2D / 3D

  Days to Ship:	31 Day(s) or more

• 

  Free Mount Type Rotary Actuator With Angle Adjuster, Vane Type, CRBU2WU Series

  SMC

  Can be combined freely with many kinds of unit.
  [Features]
  With angle adjuster.
  · · Boasts a 12% weight reduction.
  · Multiple mounting variations.
  · Works with the compact auto switch D-M9□ type.
  · Possible to move the plate mounting position as desired.
  · Mounting pitch compatible with existing models.
  · Rotation angles of 90°, 180° and 270°; all of the series can rotate up to 270°.

  CAD ：

  2D / 3D

  Days to Ship:	32 Day(s) or more

• 

  Rotary Actuator With Angle Adjuster, Vane Type, CRB2□WU Series

  SMC

  Can be combined freely with many kinds of unit.
  [Features]
  With angle adjuster.
  · Piping port parts are located on the flat section.
  · Many variations of shaft-end shape (6 types).
  · Works with the compact auto switch D-M9□ type.

  CAD ：

  2D / 3D

  Days to Ship:	32 Day(s) or more

• 

  LER Series Electric Rotary Table, Continuous Rotation Specification

  SMC

  Shockless / high-speed rotary actuator.
  [Features]
  · Positioning repeatability: ±0.03° (high-precision type).
  · Rotation angle: 360°.
  · Possible to set speed, acceleration/deceleration and positioning up to 64 points.
  · Energy-saving product: Automatic 40% power reduction after the table has stopped.
  · Step motor (servo 24 V DC).
  · RoHS compliant.

  CAD ：

  2D / 3D

  Days to Ship:	21 Day(s) or more

• 

  Rotary Table Rack Pinion Type MSQ Series With External Absorber. Size: 10 to 30·50

  SMC

  By shortening the effective stroke of the shock absorber, absorption time is shortened, making it possible to improve the takt time.
  [Features]
  · 4 to 10 times more allowable kinetic energy.
  & Nbsp2 types of shock absorber are available, for low energy and high energy.
  · Reduced overall length.
  & NbspThere are no protrusions from the adjusting bolts or internal shock absorbers, reducing the longitudinal mounting space.
  · The table height is the same for both types (types with adjustment bolts and types with internal shock absorber).

  CAD ：

  2D / 3D

  Days to Ship:	32 Day(s) or more

• 

  Large Therex Rotary Vane Type, Standard

  CKD

  100N/m (single) 200N/m (double) are added to the series of proven rotary vane types.

  Days to Ship:	23 Day(s) or more

• 

  Small High Rotor / Standard Type, PRNA Series (Single Vane / Double Vane)

  KURODA PNEUMATICS

  Prevents air leakage, improves the minimum operating pressure from 0.2MPa to 0.1MPa, and doubles the maximum oscillation time, thereby increasing the scope of possible applications. 2MPato 0.1MPa and extends the longest oscillating time to 2 times more than traditional. Controls ejection phenomenon to obtain smooth operation.

  CAD ：

  2D

  Standard Price:	SGD 314.65
  Days to Ship:	10 Day(s) or more

• 

  CRA1□□U Series Angle Adjustable Rotary Actuator, Rack & Pinion Type

  SMC

  A rotary actuator that can be mounted according to the operating conditions.
  [Features]
  · Compact auto switches are mountable (D-M9□).
  · The cushion seal is replaceable.
  · Easy adjustment of the cushion valve.
  · The ports, cushion valve and auto switch are all located on the same surface for improved usability.
  · Many variations of shaft type.
  · Angle can be adjusted to the desired level in a range of up to 90°.
  · CRA1: basic type / CDRA1: with auto switch.
  · Size: 50, 63, 80, 100.

  CAD ：

  2D / 3D

  Days to Ship:	32 Day(s) or more

• 

  Free Mount Type Rotary Actuator, Vane Type, CRBU2 Series

  SMC

  Can be combined freely with many kinds of unit.
  [Features]
  · Boasts a 12% weight reduction.
  · Multiple mounting variations.
  · Works with the compact auto switch D-M9□ type.
  · Possible to move the plate mounting position as desired.
  · Mounting pitch compatible with existing models.
  · Rotation angles of 90°, 180° and 270°; all of the series can rotate up to 270°.

  CAD ：

  2D / 3D

  Days to Ship:	32 Day(s) or more

• 

  Rotary Actuator With Solenoid Valve, Vane Type, CVRB1 Series

  SMC

  Rotary actuator with solenoid valve.
  [Features]
  ·2 types of port positions, body side and axial direction
  ·Mounting method: Direct mounting / foot type mounting
  ·Auto switch: None (no symbol), with auto switch (D)
  ·Size: 50, 63, 80, 100
  ·Vane type: Single vane, double vane
  ·Rotating angle: 90°, 100°, 180°, 190°, 270°, 280°, 45°, 135°

  Days to Ship:	32 Day(s) or more

• 

  ATEX Directive, Rotary Actuator, Vane Type 55-CRB2 Series, ATEX Category 2

  SMC

  [What is the ATEX directive?]
  Since July 1, 2003, it has been mandatory within the EU to comply with the ATEX Directive for equipment used in potentially explosive atmospheres.
  ■CE mark and ATEX
  The ATEX Directive is now part of the CE mark, which incorporates the conventional European explosion-proof standard.
  ■Purpose of ATEX Directive
  The main purposes of ATEX are:
  ・ Prevention of static charge
  ・ Ignition prevention of sparks caused by friction, impact, and wear
  ・ Ignition prevention due to temperature rise due to the same as above
  ・ The responsibility lies with the manufacturer
  ・ Certification by zone/category
  ■Zone / category division
  In ATEX, the objects to be applied are classified into categories according to the category of dangerous places (zone).
  ・ Zone 0: Category 1
  Probability of explosive atmosphere (Zone): Continuous or long time, > 1,000 hours/year
  ・ Zone 1: Category 2
  Probability of explosive atmosphere (Zone): Occasionally, 10 to 1,000 hours/year
  ・ Zone 2: Category 3
  Probability of explosive atmosphere (Zone): Less likely, short time < 10 hours/year

  Days to Ship:	Quote

• 

  CRQ2X Series Rack & Pinion Type Compact Low-Speed 90°/180° Rotary Actuator

  SMC

  Compact, low-speed rotary actuator capable of low-speed transfer of workpieces.
  [Features]
  · Achieves stable motion at 5 s/90°.
  · Smooth motion without sticking or slipping.
  · Rotation time adjustment range: 1 to 5 s/90°.
  · Standard type: CRQ2 / With auto switch: CDRQ2.
  · Size: 10, 15, 20, 30, 40.
  · Port types: G1/8, NPT1/8, NPTF1/8, Rc1/8, M5.

  CAD ：

  2D / 3D

  Days to Ship:	32 Day(s) or more

• 

  Rotary Cylinder CRH Series - Standard Type/Inner Hole Type

  CHELIC

  Brand-name products provided by MISUMI-VONA are offered based on customer needs and have been carefully selected from the offerings of Asian manufacturers showing remarkable growth. Please select the right item for your individual usage environment. Founded in 1988, Taiwan CHELIC Corporation's pneumatic equipment parts have received high praise on the world market. Their cylinder quality gets particularly high reviews, and is used in various fields.

  CAD ：

  2D

  Days to Ship:	17 Day(s)

• 

  CVRA1 Series Rotary Actuator With Solenoid Valve, Rack & Pinion Type

  SMC

  Solenoid valve and rotation speed adjustment function are integrated.
  [Features]
  · Compact auto switches are mountable (D-M9□).
  · Replaceable cushion seal, easy adjustment of cushion valve.
  · The ports, cushion valve and auto switch are all located on the same surface for improved usability.
  · Numerous shaft shape variations allow mounting to suit the operating conditions.
  · Part number is set for the angle adjustable type.
  · CVRA1: basic type / CDVRA1: with auto switch.
  · Size: 50, 63, 80, 100.

  Days to Ship:	32 Day(s) or more

• 

  Rotary Actuator, Rack and Pinion Type, Clean Series 11-CRA1-Z Series

  SMC

  [11-Series Clean Series]
  ・ This product can be used in a clean environment
  ・ Prevents dust generation in the cleanroom

  Days to Ship:	32 Day(s) or more

• 

  Rotary Actuator, Vane Type, Clean and Low Dust Generation 10-/21-CRB1 Series

  SMC

  [10-Series Clean Series]
  ・ This product can be used in a clean environment
  ・ Prevents dust generation in the cleanroom
  
  [21-Series, Copper-Free/ Fluorine-Free/ Silicone Type-Free + Low Dust Generation]
  ・ This product can be used in environments with restrictions on copper-based, fluorine-based, and silicone-based materials
  ・ The structure is the same as the Clean Series (Grease and packaging are different from the Clean Series)

  CAD ：

  2D / 3D

  Days to Ship:	32 Day(s) or more

• 

  ATEX Directive, Rotary Actuator, Vane Type 55-CRB1 Series, ATEX Category 2

  SMC

  [What is the ATEX directive?]
  Since July 1, 2003, it has been mandatory within the EU to comply with the ATEX Directive for equipment used in potentially explosive atmospheres.
  ■CE mark and ATEX
  The ATEX Directive is now part of the CE mark, which incorporates the conventional European explosion-proof standard.
  ■Purpose of ATEX Directive
  The main purposes of ATEX are:
  ・ Prevention of static charge
  ・ Ignition prevention of sparks caused by friction, impact, and wear
  ・ Ignition prevention due to temperature rise due to the same as above
  ・ The responsibility lies with the manufacturer
  ・ Certification by zone/category
  ■Zone / category division
  In ATEX, the objects to be applied are classified into categories according to the category of dangerous places (zone).
  ・ Zone 0: Category 1
  Probability of explosive atmosphere (Zone): Continuous or long time > 1,000 hours/year
  ・ Zone 1: Category 2
  Probability of explosive atmosphere (Zone): Occasionally 10 to 1,000 hours/year
  ・ Zone 2: Category 3
  Probability of explosive atmosphere (Zone): Less likely, short time < 10 hours/year

  Days to Ship:	Quote

• 

  ATEX Directive, Rotary Actuator, Vane Type 56-CRB1 Series, ATEX Category 3

  SMC

  [What is the ATEX directive?]
  Since July 1, 2003, it has been mandatory within the EU to comply with the ATEX Directive for equipment used in potentially explosive atmospheres.
  ■CE mark and ATEX
  The ATEX Directive is now part of the CE mark, which incorporates the conventional European explosion-proof standard.
  ■Purpose of ATEX Directive
  The main purposes of ATEX are:
  ・ Prevention of static charge
  ・ Ignition prevention of sparks caused by friction, impact, and wear
  ・ Ignition prevention due to temperature rise due to the same as above
  ・ The responsibility lies with the manufacturer
  ・ Certification by zone/category
  ■Zone / category division
  In ATEX, the objects to be applied are classified into categories according to the category of dangerous places (zone).
  ・ Zone 0: Category 1
  Probability of explosive atmosphere (Zone): Continuous or long time, > 1,000 hours/year
  ・ Zone 1: Category 2
  Probability of explosive atmosphere (Zone): Occasionally, 10 to 1,000 hours/year
  ・ Zone 2: Category 3
  Probability of explosive atmosphere (Zone): Less likely, short time < 10 hours/year

  Days to Ship:	32 Day(s) or more

Loading...