Filter（Filtration Level：0.01µm）

• • On Sale Till 31/03/2025

  

  Mist Separator AFM20 to AFM40-A/Micro Mist Separator AFD20 to AFD40-A

  SMC

  Energy-saving Mist Separator AFM and Micro-Mist Separator AFD.
  [Features]
  · Improved visibility and environmental resistance.
  · The bowl is completely covered by transparent bowl guard.

  CAD ：

  2D / 3D

  	Special Price
  Days to Ship:	31 Day(s) or more

• 

  Micro Mist Separator with Pre-Filter AMH Series

  SMC

  Micro Mist Separator with Pre-Filter AMH Series; separates and removes oil particles in an aerosol state.
  [Features]
  · A micro mist separator that can remove any fine contaminants of 0.01 μm or more such as carbon and dust.
  [Applications]
  · Use as a pre-filter for compressed air for use in clean rooms or precision instruments that require air with a high degree of cleanliness.

  CAD ：

  2D / 3D

  Days to Ship:	31 Day(s) or more

• • On Sale Till 31/03/2025

  

  Clean Air Filter SFD Series

  SMC

  Clean Air Filter SFD Series with clear resin case.
  [Features]
  · Filtration: 0.01 μm.
  · Initial pressure drop: 0.03 MPa.
  · Maximum operating pressure: 1.0 MPa.
  [Applications]
  · Use with clean air blowers / ionizer blowers.
  · Use for chamber substitution and fluid pumping.

  CAD ：

  2D / 3D

  	Special Price
  Days to Ship:	Same day or more

• 

  Compressed Air Preparation Filter AFF/AM/AMD Series

  SMC

  [Features]
  ・ Space saving and labor hour reduction
  ・ Achieved weight reduction by using a thin stainless steel case. The work load during installation is reduced.
  ・ The increased amount of treated air by reducing the pressure drop contributes to energy saving.
  ・ Improved workability when replacing elements
  ・ The element has a slit end cap.
  ・ It can be identified by color

  Days to Ship:	32 Day(s) or more

• 

  Super Mist Separator AME Series

  SMC

  Super Mist Separator AME Series; separates and adsorbs oil particles in an aerosol state.
  [Features]
  · Changes oil-lubricating compressed air to oil-free equivalent air.
  [Applications]
  · Use for filtering compressed air for use on coating lines that require a high degree of cleanliness.
  · Use for filtering compressed air for use in clean rooms and for compressed air for use in equipment with which oil must be avoided.

  CAD ：

  2D / 3D

  Days to Ship:	31 Day(s) or more

• 

  Micro Mist Separator AMD Series

  SMC

  SMC Micro Mist Separator.
  [Features]
  · Can separate and remove oil particles in an aerosol state as well as any fine contaminants of 0.01 μm or more such as carbon and dust.
  · Use as a pre-filter for compressed air for use in clean rooms or precision instruments that require air with a high degree of cleanliness.

  CAD ：

  2D / 3D

  Days to Ship:	31 Day(s) or more

• 

  Odor Removal Filter AMF Series

  SMC

  The Odor Removal Filter AMF Series supports modular connections.
  [Features]
  · Can save space and helps reduce the amount of piping.
  · Height reduced by up to 40% and weight reduced by up to 40%.

  CAD ：

  2D / 3D

  Days to Ship:	32 Day(s) or more

• 

  Oil Mist Filter (Modular-Type Standard) M*000 Series

  CKD

  Modular design. Removes oils and oil mist effectively.

  CAD ：

  2D

  Days to Ship:	13 Day(s) or more

• 

  Micro Mist Separator 25A-AMD Series Compatible With Rechargeable Batteries

  SMC

  [Rechargeable battery compatible series]
  ・ In order to reduce product defects in the rechargeable battery manufacturing process, materials containing copper (Cu) and zinc (Zn) as the main components are not used.
  * Some aluminum alloys and die-cast aluminum materials contain small amounts of copper (Cu) and zinc (Zn) as additive elements.
  ・ Electrolytic nickel plating and zinc plating with copper base are not used.
  * Electrolytic nickel plating is used.
  ・ Low dew point compatible grease used, can be used at -70°C. Performance improvement in low dew point environment.

  Days to Ship:	Quote

• 

  Clean Gas Filter Cartridge Type, Straight Type, SFB100 Series

  SMC

  Clean Gas Filter Cartridge Type, Straight Type for precision filtration for compressed air and nitrogen.
  [Features]
  · The filter has been made into a cartridge using a fluororesin holder and a fluororubber (FKM) gasket.
  · Replaceable elements.
  · Bracket included as standard.·

  CAD ：

  2D / 3D

  Standard Price:	SGD 393.28-
  Days to Ship:	32 Day(s)

• 

  Clean Gas Filter: Disposable Type / Multiple Disc Type, SFC100 Series

  SMC

  Highly reliable fluoropolymer membrane clean gas filter.
  [Features]
  ·Element cannot be replaced
  ·Precision filtration of compressed air and nitrogen for semiconductor processes
  ·Filtration degree 0.01 µm (filtration efficiency 99.99%)
  ·Disposable type, multiple disc type
  ·Connection method: Rc, TSJ, URJ
  ·Nominal pipe thread size: 1/4, 3/8

  CAD ：

  2D / 3D

  Days to Ship:	32 Day(s) or more

• 

  SFS10-FP2 Series

  CKD

  [Features]
  · Reliable "antimicrobial" and "disinfectant" powers
  · Sterilization active value of 3 and bacteria trapping performance of LRV8 or higher.
  · Uses material compliant with the Food Sanitation Act of Japan
  · NSF H1 grease for food products used
  · Antibacterial materials used for the exterior.

  Standard Price:	SGD 373.58-
  Days to Ship:	4 Day(s) or more

• 

  Exhaust Cleaner For Cleanroom, AMP Series

  SMC

  Exhaust Cleaner For Cleanroom AMP Series with reassuring two-stage element construction.
  [Features]
  · Exhaust cleaner that can be used inside a cleanroom.
  · Exhaust air cleanliness: Equivalent to ISO Class 5 (Class 100 Fed.Std.209D).
  · Particles of 0.3 μm or larger are kept to 3.5 particles/L or less.

  CAD ：

  2D / 3D

  Days to Ship:	32 Day(s) or more

• 

  Clean Gas Filter: Disposable Type / Straight Type, SFB300 Series

  SMC

  Clean gas filter with bracket included as standard.
  [Features]
  ·Element cannot be replaced
  ·Precision filtration of compressed air and nitrogen for semiconductor processes
  ·Highly reliable fluoropolymer membrane
  ·Filtration degree 0.01 µm (filtration efficiency 99.99%)
  ·Connection port diameter: 1/4
  ·Connection method: Rc/TSJ/URJ (For SFB31, only URJ can be selected)
  ·Model type: Disposable type (narrow size) / disposable type (long size)

  CAD ：

  2D / 3D

  Standard Price:	SGD 439.48-
  Days to Ship:	32 Day(s)

• 

  Clean Air Module (Standard / High Flow Type), LLB Series

  SMC

  Modularized (reduces piping labor hours / saves space) to allow clean air to be obtained easily.
  [Features]
  · Filtration: 0.01 μm (filtration efficiency 99.99%).
  · Fluid contact space: Grease-free, silicone-free.
  · Available in 24 variations of combinations.
  · Built-in single-action fittings.
  · Can be fitted with pressure gauge / pressure switch (separate purchase).
  · RoHS compliant.

  CAD ：

  2D / 3D

  Days to Ship:	32 Day(s) or more

• 

  Exhaust Cleaner for Cleanroom, Rechargeable Battery Compatible, 25A-AMP Series

  SMC

  [Rechargeable battery compatible series]
  ・ In order to reduce product defects in the rechargeable battery manufacturing process, materials containing copper (Cu) and zinc (Zn) as the main components are not used.
  * Some aluminum alloys and aluminum die-cast aluminum materials contain small amounts of copper (Cu) and zinc (Zn) as additive elements.
  ・ Nickel electroplating and zinc plating with copper base are not used.
  * Electroless nickel plating is used.
  ・ Low dew point compatible grease is used, it can be used at -70°C. Performance improvement in low dew point environment.

  Days to Ship:	32 Day(s) or more

• 

  Micro Filter, MS6 Series

  FESTO

  Standard Price:	SGD 191.40-
  Days to Ship:	Quote

• 

  Micro Mist Separator With Pre-Filter, Clean, Copper-Free / Fluorine-Free Specifications, 10/20-AMH Series

  SMC

  [10-Series Clean Series]
  ・ This product can be used in a clean environment.
  ・ Prevents dust generation in the cleanroom.
  
  [20-series Copper-Free/Fluorine-Free Specifications]
  ・ It can be used in environments where copper and fluorine materials should be avoided.
  ・ External dimensions are the same as standard products.

  Days to Ship:	32 Day(s) or more

• 

  Odor Removal Filter Clean Series 10-AMF Series

  SMC

  [Features]
  ・ Activated carbon fiber elements effectively remove odors from compressed air. It is used in areas where odors are disliked, such as for cleanrooms.
  ・ Odors of compressed air are removed and it is easy to replace and install the activated carbon fiber elements which have large adsorption areas.
  ・ Modular coupling is possible for 10-AMF150C to 550C.

  Days to Ship:	32 Day(s) or more

• 

  Air Filter 3-in-1 Multi-dry Filter for Compressed Air

  MAEDA SHELL SERVICE

  Prevents trouble and brownouts caused by compressed air contamination, and supplies super clean compressed air.
  
  [Features]
  · Has 3 elements on the same core and coaxial, dries and separates oil and moisture, removes oil particles of more than 0.01 μm and makes the compressed air super clean air in steps.
  · Has 2 pressure gages and you can visually monitor the exchange magnets of the elements.
  · Creates the same vacuum state with tornado when the pressured air passes, vaporizes the water drops due to the difference between inner and outer pressures, and makes dried air with a humidity up to about 15% (when 0.7MPa).
  · Pressure loss is 30-50% lower when compared to other oil mist filters.
  · Easy to disinfect and clean due to easy removal for exchanging all elements.
  · Discharges the drain automatically (water, oil and toxic substances from the compressed air). Almost no failures by using inner pressure.

  Standard Price:	SGD 1,013.87
  Days to Ship:	4 Day(s) or more

• 

  Clean Gas Filter Cartridge Type Disc, SFA100/200/300 Series

  SMC

  Clean gas filter that can be used in a wide range of environments.
  [Features]
  ·Precision filtration of compressed air and nitrogen
  ·Consistent cleaning, assembly, testing, and antistatic sealed double packaging of all parts in a clean environment
  ·Cartridge of PTFE membrane element (filtration degree 0.01 µm (filtration efficiency 99.99%))
  ·Element exchange is possible
  ·Cartridge type / disc type

  CAD ：

  2D / 3D

  Days to Ship:	32 Day(s) or more

• 

  Clean Gas Strainer: Cartridge Type / Straight Type, SFB200 Series

  SMC

  Clean gas strainer with bracket included as standard.
  [Features]
  · SUS316 sintered metallic element in a cartridge form (nominal filtration: 120 μm).
  · Replaceable elements.
  · Cartridge type / Straight type.
  · Connection port diameter: 1/4.
  · Connection method: Rc/NPT/TSJ/UOJ.
  · RoHS compliant.

  CAD ：

  2D / 3D

  Days to Ship:	32 Day(s) or more

• 

  Air-Blow Module (Straight/Elbow), LLB1 Series

  SMC

  Air-blow module for which short-pitch mounting is possible.
  [Features]
  · Reduces piping labor time and enables space saving.
  · Compact integration of all devices.
  · Parts in contact with fluid: Grease-free.
  · Can be combined in 3 pattern variations.
  · Built-in clean air filter.
  · Filtration: 0.01 μm (filtration efficiency 99.99%).
  · Centralized pressure control is achieved with compact design.

  CAD ：

  2D / 3D

  Days to Ship:	32 Day(s) or more

• 

  Micro Filter, LFMA Series

  FESTO

  Standard Price:	SGD 154.50-
  Days to Ship:	Quote

• 

  AIRX Small Filter Series (Built-In Floating Drain Trap)

  FUKUHARA

  Has a high performance filter filled with gas-liquid separation materials

  Standard Price:	SGD 239.67-
  Days to Ship:	10 Day(s) or more

• 

  COM-PURE AIRX high pressure standard filter

  FUKUHARA

  Highest pressure used: 4.9MPa
  
  [Features]
  · A system where the compressed air passes through air-liquid separating material and filters from the inside of element to the outside is used.
  · Air-liquid separating material is inserted, which increases the air-liquid separation performance.
  · There are almost no obstacles due to foreign substances in the drain trap because the foreign substances are trapped in the inside and stay inside.

  Standard Price:	SGD 1,048.71-
  Days to Ship:	13 Day(s) or more

• 

  Large Filter

  CHELIC

  MISUM-VONA products are carefully selected products from rapidly growing Asian manufacturers based on the needs of our customers. Choose the product that best suits your current needs. Founded in 1988, Cheric Taiwan pneumatic equipment parts have received high praise on the world market. Their cylinder quality gets particularly high reviews, and is used in various fields.

  CAD ：

  3D

  Standard Price:	SGD 182.49-
  Days to Ship:	12 Day(s)

• 

  Anti-bacterial/bacteria eliminating 3-in-1, multi dry filter

  MAEDA SHELL SERVICE

  [Features]
  ● Creates clean and compressed air without any harm, bacteria or mold.
  ● HACCP support.
  ● Continues to remove more than 99.99% of oil mist, zero water droplets, and removes solid particle of more than 0.01μm (sterilization effect).
  ● The sterilization effect is verified by Japan Food Research Laboratories.
  ● Controls bacteria growth by using an antibacterial filter.
  
  [Use]
  ● Production lines for products with agitation, filling, packaging, pumping and for cleaning lines.
  

  Standard Price:	SGD 1,050.42-
  Days to Ship:	8 Day(s) or more

• 

  ExCel Inline Filter

  MAEDA SHELL SERVICE

  [Features]
  ● Can remove oil mist from 0.01μm and 99.99% of particles with hollow fiber.
  ● No rust with special engineering plastic.
  ● HACCP support.
  
  [Use]
  ● Medical and food machinery, precision measurement equipment, analytical instruments, semiconductor production and printing.
  

  Standard Price:	SGD 185.69
  Days to Ship:	10 Day(s) or more

• 

  SFC307/SFC407-FP2 Series

  CKD

  [Features]
  · Reliable "antimicrobial" and "disinfectant" powers
  · Sterilization active value of 3 and bacteria trapping performance of LRV8 or higher.
  · Uses material compliant with the Food Sanitation Act of Japan
  · NSF H1 grease for food products used
  · Antibacterial materials used for the exterior.

  Standard Price:	SGD 845.59
  Days to Ship:	20 Day(s) or more

• 

  Micro Mist Separator, 10-AMD Series

  SMC

  Micro Mist Separator 10-AMD Series separates and removes aerosol-state oil particles.
  [Features]
  · Modular connection possible with 10-AMD150C to 550C.
  · Removes any fine solid particles, such as carbon or dust, of more than 0.01 μm.
  [Applications]
  · Use as a pre-filter for compressed air used for precision instruments or in clean rooms that require air with a high degree of cleanliness.

  Days to Ship:	32 Day(s) or more

• 

  For Food Manufacturing Process, High-Performance Oil Mist filter MX1000/MX3000/MX4000/MX6000/MX8000-W-FP1 Series

  CKD

  It supports food manufacturing.
  Food-grade lubricant (NSF H1) is used for the flow path and sliding parts.
  Modular design.
  High performance and 10 times the oil removal ability.
  Long life and low pressure loss.
  Secondary oil concentration 0.001 mg/m^3
  Ideal for optical devices such as optical positioning devices and laser machines.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  F.R.L. Large Flow Series, Micro Mist Filter MMF Series

  KOGANEI

  A series of line-end equipment ideal for treatment performed at large flow rates. A modular type that can be selected for various applications.

  CAD ：

  2D

  Standard Price:	SGD 666.14-
  Days to Ship:	13 Day(s) or more

• 

  Micro Oil Mist Filter MMFZ Series

  KOGANEI

  Compact design, collects oil mist, improved visibility of filter element, ozone resistant, NCU specification compatible as standard.

  Standard Price:	SGD 93.92
  Days to Ship:	18 Day(s) or more

• 

  Super Mist Separator Clean Series 10-AME Series

  SMC

  [Features]
  ・ Aerosol-like oil particles are separated and adsorbed, and the oil-lubricated compressed air is changed to oil-less air or equivalent.
  ・ Please use the product for filtration of compressed air for applications requiring highly clean air, such as painting lines, compressed air for cleanrooms, and compressed air for equipment for which contact with oils must be avoided.
  ・ The replacement time of filter elements is displayed with color change so that the replacement time can be visually checked.
  ・ Modular coupling is possible for 10-AME150C to 550C.

  Days to Ship:	32 Day(s) or more

• 

  Micro Mist Separator With Pre-Filter, Rechargeable Battery Compatible, 25A-AMH Series

  SMC

  [Rechargeable battery compatible series]
  ・ In order to reduce product defects in the rechargeable battery manufacturing process, materials containing copper (Cu) and zinc (Zn) as the main components are not used.
  * Some aluminum alloys and aluminum die-cast aluminum materials contain small amounts of copper (Cu) and zinc (Zn) as additive elements.
  ・ Nickel electroplating and zinc plating with copper base are not used.
  * Electroless nickel plating is used.
  ・ Low dew point compatible grease is used, it can be used at -70°C. Performance improvement in low dew point environment.

  Days to Ship:	Quote

• 

  Micro Mist Separator, Clean and Low Dust Generation 10-/20-/21-AFD-A Series

  SMC

  [10-Series Clean Series]
  ・ This product can be used in a clean environment.
  ・ Prevents dust generation in the cleanroom.
  
  [20-series Copper-Free/Fluorine-Free Specifications]
  ・ It can be used in environments where copper and fluorine materials should be avoided.
  ・ External dimensions are the same as standard products.
  
  [21-Series, Copper-Free / Fluorine-Free / Silicone-Free + Low Dust Generation]
  ・ This product can be used in environments with restrictions on copper-based, fluorine-based, and silicone-based materials.
  ・ The structure is the same as the Clean Series (grease and packaging form differ from the Clean Series. )

  CAD ：

  2D / 3D

  Days to Ship:	Quote

• 

  Micro-filter Cartridge

  FESTO

  Standard Price:	SGD 153.35
  Days to Ship:	Quote

• 

  Micro Filter Cartridge, MS4/D Series

  FESTO

  Standard Price:	SGD 82.90
  Days to Ship:	Quote

• 

  Micro Filter, MS4 Series

  FESTO

  Standard Price:	SGD 123.60-
  Days to Ship:	Quote

Loading...