Regulators, Pressure Boosting Valves

• 

  Electro-Pneumatic Regulator ITV1000/2000/3000 Series

  SMC

  Electro-Pneumatic Regulator ITV1000/2000/3000 Series with 2 possible directions of cable entry.
  [Features]
  · Stepless control of air pressure in proportion to an electric signal.
  · Sensitivity: 0.2 kPa (100 kPa specification).
  · Linearity: within ±1% (F.S.)
  · Hysteresis: within 0.5% (F.S.)
  · Protective structure: IP65.
  · 2 possible directions of cable entry.
  · Grease-free specification (ITV1000 Series).

  CAD ：

  2D / 3D

  Days to Ship:	21 Day(s) or more

• • On Sale Till 31/03/2025

  

  Regulator (With Backflow Function) AR20(K)-B To AR60(K)-B Series

  SMC

  SMC Regulator (With Backflow Function) AR20(K)-B To AR60(K)-B Series.
  [Features]
  · Specifications with a backflow function feature an inbuilt mechanism for quickly exhausting the air-pressure at the outlet side.

  CAD ：

  2D / 3D

  	Special Price
  Days to Ship:	Same day or more

• • On Sale Till 31/03/2025

  

  Regulator AR10-A to AR40-A

  SMC

  SMC Regulator AR10-A to AR40-A.
  [Features]
  · Energy saving regulator.
  · Pressure drop amount: Improved by up to 50%.

  CAD ：

  2D / 3D

  	Special Price
  Days to Ship:	Same day or more

• 

  Clean Regulator SRH Series

  SMC

  SRH Series Clean Regulator with a pulsation suppression valve design.
  [Features]
  · Contamination-controlled stainless steel regulator.
  · Oil-free parts assembly.
  · Select between a PTFE (grade A) or fluororubber (grade B) diaphragm depending on the application.
  · Designed with an intake/exhaust port in the diaphragm compartment, facilitating flow.
  · Constructed with valve springs partitioned off by the diaphragm.
  · Pulsation-suppressing valve structure.
  · Cleaned, assembled, and inspected in a Class 100 environment and then packaged and sealed in double bags.

  CAD ：

  2D / 3D

  Days to Ship:	31 Day(s) or more

• 

  Regulator - Single Unit Type, ARM10 Series

  SMC

  Regulator - Single Unit Type, ARM10 Series; available with a variety of one-touch fitting types and sizes.
  [Features]
  · Select the most appropriate type and size for the given installation conditions.
  · Backflow function equipped as standard.
  · Compatible with units with a digital pressure switch.

  CAD ：

  2D / 3D

  Days to Ship:	21 Day(s) or more

• • On Sale Till 31/03/2025

  

  Precision Regulator IR1000-A/2000-A/3000-A Series

  SMC

  The Precision Regulator IR1000-A/2000-A/3000-A Series boasts a high flow rate of approximately 2 times the previous series (at maximum).
  [Features]
  · Air consumption reduced by up to 90% (approx.)
  · Lightweight type with approximately 27% weight reduction.
  · Sensitivity: 0.2% (full span).
  · Repeatability: ±0.5% (full span).

  CAD ：

  2D / 3D

  	Special Price
  Days to Ship:	Same day or more

• • On Sale Till 31/03/2025

  

  Air Regulators/With Filter

  MISUMI

  [Features]·Pressure reducing valve with an air filter. ·The pressure gauge is sold separately.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 19.04-
  	Special Price
  Days to Ship:	Same day or more

• • On Sale Till 31/03/2025

  

  Regulator - Single Unit Type, ARM5S Series

  SMC

  Regulator - Single Unit Type, ARM5S Series; available with a variety of one-touch fittings.
  [Features]
  · Width: 14 mm.
  · 2 mounting methods are available (direct mounting and DIN rail mounting).
  · Backflow function equipped as standard.

  CAD ：

  2D / 3D

  	Special Price
  Days to Ship:	Same day or more

• 

  ITV0000 Series Compact Electro-Pneumatic Regulator

  SMC

  ITV0000 Series Compact Electro-Pneumatic Regulator realizes space savings and reduction of weight for manifold use.
  [Features]
  · DIN rail mount design lets you easily add or remove stations.
  · Compact (15 mm) and lightweight (100 g).
  · 2 types of cable connectors are available: straight type and right-angle type.
  · Built-in single-action fitting.
  · With error indication LED.
  · 2 types of brackets are available: flat brackets and L-shaped brackets.
  · IP65 equivalent enclosure protection.
  · Linearity: within ±1% (full span).

  CAD ：

  2D / 3D

  Days to Ship:	32 Day(s) or more

• • On Sale Till 31/03/2025

  

  Regulator and Manifold Regulator Replacement Parts

  SMC

  *The product image is for illustration purposes. Please note that they are different from the actual product.
  
  Regulator and Manifold Regulator Replacement Parts, including bowl assembly, valve assembly, valve guide assembly, bracket assembly, etc.
  
  [Please click here for the catalog]
  ・ P. 255 Regulator AR10-A to AR40-A
  ・ P. 255 Regulator AR20-B to AR60-B
  ・ P. 256 Regulator With Backflow Function AR20K-B to AR60K-B
  ・ P.261 Regulator With Built-in Pressure Gauge ARG20/30/40
  ・ P. 261 Regulator With Built-in Pressure Gauge With Backflow Function ARG20K/30K/40K
  ・ P. 264 Pilot Operated Regulator AR425 to 935
  ・ P. 265 MR Unit (Regulator With Mist Separator) AMR3000 to 6000
  ・ P. 266 Manifold Regulator / Centralized Supply Type ARM5A
  ・ P. 267 Manifold Regulator / Individual Supply Type ARM5B
  ・ P. 268 Regulator / Single Unit Type ARM5S
  ・ P. 269 Regulator / Single Unit Type ARM10
  ・ P.270 Manifold Regulator / Centralized Supply Type ARM11A
  ・ P.271 Manifold Regulator / Individual Supply Type ARM11B

  	Special Price
  Days to Ship:	Same day or more

• 

  Power Valve: Precision Regulator VEX1□3 Series

  SMC

  A precision regulator from SMC.
  [Features]
  · A high precision, large capacity relief regulator.
  · A poppet-type, 3-port, large exhaust capacity regulator valve with nozzle flapper mechanism. Available as an air-operated or manual handle type.
  · Excellent pressure setting precision. Having a relief capacity equivalent to the supply capacity allows the regulator to respond quickly and set a precise secondary (outlet) pressure, even when the secondary (outlet) volume and the pressure fluctuations are large.
  · High precision.
  · Minimizes pressure fluctuations with its large-volume supply and exhaust capabilities, making it well suited to balancer applications. In addition it features high precision F.S. (full span) sensitivity within 0.2% and F.S. repeatability of within ±0.5%.
  · Manifold capable. VVEXB: 1/8 - up to 10 stations, VVEX2: 1/4 - up to 8 stations
  · Series with large product lineup. Port diameters available from M5 to 2 inches, ensuring that most flow rates and pipes can be accommodated.
  [VEX1A33/VEX1B33]
  · Minimum size.
  · Non-grease specification.
  · Available with sealing materials of NBR or FKM.

  CAD ：

  2D / 3D

  Days to Ship:	32 Day(s) or more

• 

  ITVX2000 Series 5.0 MPa High-Pressure Electro-Pneumatic Regulator

  SMC

  High-pressure electro-pneumatic regulator that allows stepless control of air pressure in proportion to an electric signal.
  [Features]
  · Maximum supply pressure: 5.0 MPa.
  · Set pressure range: 0.01 to 3.0 MPa.
  · Maximum flow rate: 3,000 L/min (ANR).
  · Fluid-contact parts: fluorine grease.
  · Power consumption: 3W or less.
  · Digital pressure display.
  · RoHS compliant.

  CAD ：

  2D / 3D

  Days to Ship:	32 Day(s) or more

• 

  Compact Regulator ARX20 Series

  SMC

  The ARX20 Series is a piston-type, small-sized regulator for 2.0 MPa.
  [Features]
  · A compact type (face-to-face dimensions: 35 mm / overall length: 80 mm).
  · 3 handy out-ports added convenience.
  · Features a user-friendly handle shape.
  · Ideal for adjusting the discharge pressure on small compressors.
  · Ideal for pressure adjustment as part of air blowing applications.

  CAD ：

  2D / 3D

  Standard Price:	SGD 26.48-
  Days to Ship:	Same day or more

• 

  Direct-Operated Precision Regulator, Modular Type (With Backflow Function), ARP20(K) To ARP40(K) Series

  SMC

  Direct-Operated Precision Regulator, Modular Type (With Backflow Function) with sensitivity within 0.2% F.S.
  [Features]
  · Repeatability: Within ±1% F.S. (or within ±3 kPa).
  · Energy saving and air consumption reduced by 80%.
  · Type with the backflow function (ARP20K/30K/40K) can be installed between solenoid valves and cylinders.
  · Specifications with a backflow function feature an inbuilt mechanism for quickly and reliable exhausting the air-pressure at the outlet side.

  CAD ：

  2D / 3D

  Days to Ship:	31 Day(s) or more

• 

  Electro-Pneumatic E-P HYREG VY1 Series

  SMC

  The Electro-Pneumatic E-P HYREG VY1 Series is a hybrid regulator combining a regulator and a solenoid valve.
  [Features]
  · Stepless controls via electric signals.
  · Simple circuit configuration.
  · Easy to handle.
  · Manifold capable.
  [Applications]
  · Cylinder thrust control.
  · Drive and thrust control.
  · Flow control of various fluids / Pressure control of tanks / Air flow control for nozzles.

  CAD ：

  2D / 3D

  Days to Ship:	32 Day(s) or more

• 

  Power Valve: Regulator Valve VEX1 Series

  SMC

  The Power Valve: Regulator Valve VEX1 Series is a large capacity relief type regulator valve.
  [Features]
  · Wide range of sizes available.
  · Connection port size: 1/8 to 2.

  CAD ：

  2D / 3D

  Days to Ship:	32 Day(s) or more

• 

  Air Regulator

  MISUMI

  [Features]·Pressure reducing valve that can adjust pressure. ·It comes with a pressure gauge and a bracket.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 50.70
  Days to Ship:	Same day

• 

  [In-Stock Items] Regulator (Separate Type) 2215/B2019 Series

  CKD

  Standard type regulator series that includes low pressure versions.
  Over 30 model numbers including various options can be selected from our website.
  
  [Features]
  · Adjuster screw: turning the adjuster screw clockwise will increase the output pressure.
  · Relief valve: Prevents abnormal increases in output pressure by the valve stem and diaphragm separating when the output pressure exceeds the set pressure, allowing air pressure to vent to the atmosphere through the relief valve.
  · Diaphragm: Provides stable air pressure output by opening and closing the valve system based on the force (output pressure) that the pressure regulating spring strikes the bottom of the diaphragm.
  · The large 2215 regulators use a piston to balance the pressure regulating spring.
  · Valve system: Only allows the required amount to pass from input to output when there is an imbalance between the diaphragm and pressure regulating spring.
  · Excellent flow amount due to its wide radius valve openings.
  · Gauge port: Accurately measures output pressure due to the center of the gauge port being located near the output side.
  · Two gauge ports.

  CAD ：

  2D

  Standard Price:	SGD 39.25-
  Days to Ship:	4 Day(s) or more

• 

  Pilot-Operated Regulator AR425 to 935 Series

  SMC

  [Features]·This is a relief type regulator using an internal pilot method.

  CAD ：

  2D / 3D

  Days to Ship:	31 Day(s) or more

• 

  Pressure regulator, LR Series

  FESTO

  Standard Price:	SGD 86.30-
  Days to Ship:	Quote

• 

  Relief Valve B6061 Series

  CKD

  Maintains set pressure by releasing compressed air when pressure rises. Note: CAD data of this series is being revised. Please wait till the corrections are done.
  
  [Features]
  · Maintains set pressure by releasing compressed air when pressure rises

  CAD ：

  2D

  Standard Price:	SGD 62.75-
  Days to Ship:	4 Day(s) or more

• 

  Precision Regulator Air-Saving Type RPE Series

  CKD

  Air consumption decreased by 70%. An environmentally friendly, new type of precision regulator. * CAD data for this series is presently under revision. Stand by until the correction is completed.

  CAD ：

  3D

  Standard Price:	SGD 141.56-
  Days to Ship:	4 Day(s) or more

• 

  Miniature Regulator ARJ210 Series

  SMC

  SMC Regulator.
  [Features]
  · The body is made of lightweight aluminum (60 g)
  · 2 types of IN side piping connection: male thread and female thread (M5)

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  IR1200-A/2200-A/3200-A Series Regulator

  SMC

  IR1200-A/2200-A/3200-A Series high-flow-rate regulator that handles up to about twice the flow rate of conventional products.
  [Features]
  · Air consumption: 0 bleed air.
  · Lightweight type with approximately 27% weight reduction.
  · Repeatability: ±1% (full span).

  CAD ：

  2D / 3D

  Days to Ship:	32 Day(s) or more

• 

  ARM1000/2000 Series Manifold Regulator

  SMC

  Manifold regulator with 4 connection methods.
  [Features]
  ·Compact pressure gauge ø15 (diameter 15 mm)
  ·Standard specifications with backflow function
  · Space saving

  CAD ：

  2D / 3D

  Days to Ship:	32 Day(s) or more

• 

  Stainless Steel Regulator RS Series

  KOGANEI

  Ideal for lines that cannot use grease or oil. Note: CAD data of this series is being revised. Please wait till the corrections are done.
  
  [Features]
  · Ideal for lines that cannot use grease or oil such as liquid crystal, liquids used in semiconductor related processes, carrier gas regulation in clean circuits, blow pressure regulation, clean air and gas pressure regulation, and food related processes that require corrosion resistant materials.
  · Equipped with push-lock mechanism on the pressure regulation handle.
  · The area that contacts gas is made from SUS316 and fluoroplastic or fluoropolymer rubber.

  CAD ：

  2D / 3D

  Standard Price:	SGD 333.60-
  Days to Ship:	4 Day(s) or more

• 

  [In-Stock Items] Regulator (Modular Type Standard) R*000 Series

  CKD

  [Features]
  · Built in pressure meter.
  · No tools needed pressure adjustment.
  · Can easily be panel mounted

  CAD ：

  2D / 3D

  Standard Price:	SGD 39.04-
  Days to Ship:	4 Day(s) or more

• 

  Regulator With Built-In Pressure Gauge ARG20/30/40

  SMC

  Regulator With Built-In Pressure Gauge ARG20/30/40 allows for one-touch installation and removal of the pressure gauge cover.
  [Features]
  · Improved visibility of the pressure gauge at various mounting locations.
  · The mounting angle of the pressure gauge can be selected according to the piping direction.
  · Pressure gauge anti-rotation mechanism.
  · Panel-cut for pressure gauge not necessary.

  CAD ：

  2D / 3D

  Days to Ship:	32 Day(s) or more

• 

  Pressure Control Valve AP100

  SMC

  Pressure Control Valve AP100 discharges pressure to the atmosphere when the pressure exceeds the set value.
  [Features]
  · A pressure control valve that helps maintain a constant pressure within pipes.

  CAD ：

  2D / 3D

  Days to Ship:	32 Day(s) or more

• 

  ITVH2000 Series 3.0 MPa High-Pressure Electro-Pneumatic Regulator

  SMC

  High-pressure electro-pneumatic regulator that supports a maximum supply pressure of 3.0 MPa.
  [Features]
  · RoHS compliant.
  · Set pressure range: 0.2 to 2.0 MPa.
  · Stability: ±1% F.S. or less.
  · Power consumption: 3W or less.
  · Maximum flow rate: 3,000 L/min (ANR).
  · Fluid-contact parts: fluorine grease.
  · Digital pressure display.
  · Linearity: ±1% F.S. or less / Hysteresis: 1% F.S. or less / Repeatability: ±1% F.S. or less.

  Days to Ship:	32 Day(s) or more

• 

  Pressure Reducing Valve With Filter, IW Series

  SMC

  [Features]
  · 2 types of set pressure regulating valve type and fixed type are available.
  · For low- and high-temperature use, Copper-free external parts can be selected.
  · Connecting direction of pressure gauge: 2 directions (front, back).

  Days to Ship:	31 Day(s) or more

• 

  Regulator Rechargeable Battery Compatible, 25A-AR20 to 60-B With Reverse Flow Function 25A-AR20K to 60K-B

  SMC

  [Rechargeable battery compatible series]
  Copper (Cu) and zinc (Zn) materials are not used to reduce product defects in the rechargeable battery manufacturing process.
  Some aluminum alloys and die-cast aluminum materials contain small amounts of copper (Cu) and zinc (Zn) as additive elements.
  Electrolytic nickel plating and zinc plating with copper base are not used. (Electrolytic nickel plating is used. )
  This product uses low dew point compatible grease, can be used at -70°C, improved performance in low dew point environment.

  Days to Ship:	32 Day(s) or more

• 

  SDR Series Regulator

  AIRTAC

  [Features]
  ・ Adopting a piston back pressure type structure, it is simple, compact, cost-effective, and easy to install.
  ・ The range of pressure that can be adjusted is wide, and not only standard type but also low pressure can be selected.
  It is mainly used when the output pressure is stable, not high pressure, and in addition when the demand for cost effectiveness is high.
  ・ A single mounting method is used for flexible mounting.

  CAD ：

  2D / 3D

  Standard Price:	SGD 17.68
  Days to Ship:	4 Day(s) or more

• 

  Pressure regulator, VRPA Series

  FESTO

  Standard Price:	SGD 119.40
  Days to Ship:	Quote

• 

  Servo Drive, CMMT-AS Series

  FESTO

  Standard Price:	SGD 1,868.10-
  Days to Ship:	Quote

• 

  Pressure Reducing Valve Regulator With Direct Mount Type Pressure Gauge

  PISCO

  [Features]
  · Can lock handle with one touch of the push lock type handle

  Standard Price:	SGD 59.35-
  Days to Ship:	4 Day(s) or more

• 

  Compact Piston Regulator RA800 Series

  CKD

  A compact, lightweight regulator with improved operability. Note: This series is being modified in CAD data. Please wait till the corrections are done.
  
  [Features]
  · A compact, lightweight regulator with improved operability

  CAD ：

  3D

  Days to Ship:	12 Day(s) or more

• • On Sale Till 31/03/2025

  

  Miniature Regulator ARJ1020F Series

  SMC

  The Miniature Regulator ARJ1020F Series is both compact and lightweight (16 g).
  [Features]
  · Low cracking pressure 0.02 MPa.
  · Standard specification equipped with backflow function.

  CAD ：

  2D / 3D

  Standard Price:	SGD 39.90-
  	Special Price
  Days to Ship:	Same day or more

• 

  Regulator With Built-In Pressure Gauge With Backflow Function ARG20K, 30K, 40K

  SMC

  SMC's ARG20K, 30K, 40K Regulator With Built-In Pressure Gauge With Backflow Function.
  [Features]
  · Improved visibility of the pressure gauge at various mounting locations.
  · Built-in function to reliably exhaust air pressure from the outlet side to the inlet side.

  CAD ：

  2D / 3D

  Days to Ship:	32 Day(s) or more

• 

  Manifold Regulator, Individual Supply Type, ARM5B Series

  SMC

  [Features]
  Available with a variety of one-touch fitting sizes.
  · 2 types of mounting method available.
  & nbspDirect mounting.
  & nbspDIN rail mounting.
  · Backflow function equipped as standard.

  CAD ：

  2D / 3D

  Days to Ship:	21 Day(s) or more

• 

  IC Series Controller For Electro-Pneumatic Regulator

  SMC

  A controller for electro-pneumatic regulators that converts digital signals to analog signals.
  [Features]
  · 10‑bit parallel input signal (maximum). Pressure can be set with 2^10 = 1,024 steps.
  · 4-point preset output pressure. Available in the programming function with up to 20 steps.
  · 4-point pressure switch function.
  · Switch output is enabled by setting the upper and lower limits of pressure.
  · Power voltage and output signals.
  · Output power voltage and output signal to the electro-pneumatic regulator can be set with keys on the front panel.
  [Applications]
  · This product is mainly used in combination with the ITV0000 Series without a display function.

  CAD ：

  2D / 3D

  Standard Price:	SGD 1,693.42-
  Days to Ship:	32 Day(s)

• 

  Precision Stainless Steel Regulator

  KOGANEI

  Ideal for gas pressure regulation in liquid crystal and semiconductor processes. Note: CAD data of this series is being revised. Please wait till the corrections are done.
  
  [Features]
  · Usable for high precision control of liquids used in liquid crystal and semiconductor related processes, carrier gas regulation in clean circuits, blow pressure regulation, and clean air and gas pressure regulation (sensitivity of 0.001MPa).

  CAD ：

  2D / 3D

  Standard Price:	SGD 385.38-
  Days to Ship:	4 Day(s) or more

• 

  Regulator (Modular Type Standard) R*000 Series

  CKD

  Modular design. Built in pressure meter. No tools needed pressure adjustment. Can also be panel mounted. Note: CAD data of this series is being revised. Please wait till the corrections are done.
  
  [Features]
  · Modular design.
  · Built in pressure meter.
  · No tools needed pressure adjustment.
  · Can also be panel mounted

  CAD ：

  2D / 3D

  Days to Ship:	12 Day(s) or more

• 

  [In-Stock Items] Dial Regulator (Separate Type) 2302/2303/2304 Series

  CKD

  Equipped with dial for easy pressure adjustment. Even high flow regulation is easy.
  
  [Features]
  · Equipped with pilot port for setting pressure, remote operation capable

  CAD ：

  2D

  Standard Price:	SGD 145.19-
  Days to Ship:	4 Day(s) or more

• 

  [NEW]Electric Pneumatic Regulator EVR series

  CKD

  Features high precision pressure regulation with its innovative use of a microcomputer for pressure regulation. Provides superb temperature and pressure stability.

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

Loading...