Tightening Fittings（Nominal of Thread：1/4 Page2）

• 

  Quick Seal Series Insert Type (Stainless Steel Type) 90° Elbow (Size in Inches)

  NITTA

  [Features]
  ・ It is a threaded type
  ・ 3 point type of body, nut and sleeve
  ・ Delivers strong sealing performance
  ・ Body and insert are integrated
  ・ Excellent negative pressure performance
  ・ Since it is made of SUS304, it has excellent corrosion resistance
  ・ JIS B 8381-1995 (pneumatic flexible pipe fittings) compliant product

  CAD ：

  2D

  Standard Price:	SGD 34.44-
  Days to Ship:	4 Day(s) or more

• 

  Chemifit CSA Series, Bushing

  NITTA

  The CSA series is a screw-in fitting made of SUS316. Drastically improved build and durability against degraded sealing performance; no assembly nut re-torquing required during maintenance.

  CAD ：

  2D

  Standard Price:	SGD 32.93
  Days to Ship:	4 Day(s) or more

• 

  Insert Fittings KF Series, Female Bulkhead Union KFE

  SMC

  [Applications]·Used as a wire-to-wire connection between male thread and tube for panel mounting, etc. [Materials]·C3604+C3771.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	32 Day(s) or more

• 

  SUS316 Insert Fittings KFG2 Series, Branch Tee KFG2T

  SMC

  [Features]
  · Compact, lightweight.
  · Grease-free.
  · Can be used with steam.
  · Conforms to the Food Sanitation Act of Japan.
  [Please refer to the following pages of the catalog]
  · Applicable tube outer diameter: metric p. 324, inches p. 329

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	32 Day(s) or more

• 

  Quick Seal Fitting (Insertless Connector)

  TRUSCO NAKAYAMA

  Features
  • Sealed screw unit.
  • Product offers superior pressure resistance and vibration resistance properties.
  
  Application
  • For pneumatic, hydraulic, and water pressure.

  Standard Price:	SGD 7.93-
  Days to Ship:	8 Day(s)

• 

  Quick Seal Fitting (Insertless Tees)

  TRUSCO NAKAYAMA

  Features
  • Sealed screw unit.
  • Product offers superior pressure resistance and vibration resistance properties.
  
  Application
  • For pneumatic, hydraulic, and water pressure.

  Standard Price:	SGD 10.35-
  Days to Ship:	8 Day(s)

• 

  Self-Align Fittings H/DL/L/LL Series Male Branch Tee DT

  SMC

  Self-aligning pipe fittings by SMC Corporation.
  [Features]
  ・ It can be used with flexible copper pipes
  ·Non-directional metal sleeve
  ・ A sleeve that is resistant to external damage
  ・ Low pressure loss
  [Applications]
  ・ Used for branch piping from female thread section in the 90 degree direction on both sides

  CAD ：

  2D / 3D

  Standard Price:	SGD 5.95-
  Days to Ship:	32 Day(s)

• 

  Self-Align Fittings H/DL/L/LL Series Male Run Tee DY

  SMC

  Self-aligning type pipe fittings by SMC Corporation.
  [Features]
  · Can be used with soft copper pipes.
  · A non-directional type metal sleeve.
  · The sleeve helps protect against external damage.
  · Low pressure loss.
  [Applications]
  · Used for 90° branch connections in both directions.

  CAD ：

  2D / 3D

  Days to Ship:	32 Day(s) or more

• 

  Self-Align Fittings H/DL/L/LL Series Swivel Extended Elbow LL

  SMC

  A tightening-type fitting with a strong edge, ensuring external damage will not easily lead to impaired functionality.
  [Features]
  · A non-directional type sleeve.
  · The sleeve helps protect against external damage.
  · Low pressure loss.
  · An extendable swivel type that can be positioned in any direction.
  · Allows for three-dimensional piping.
  [Applications]
  · Used for right-angle piping from female threads.

  CAD ：

  2D / 3D

  Standard Price:	SGD 6.88-
  Days to Ship:	32 Day(s)

• • On Sale Till 31/03/2025

  

  Couplings for Tubes - Nut and Sleeve Integrated Type - Nipples

  MISUMI

  [Features]·The fluids used are air and water. ·Nut and sleeve integrated nipple fitting for tubes.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 6.40-
  	Special Price
  Days to Ship:	Same day or more

• 

  Couplings for Tubes - Nut and Sleeve Integrated Type - Sockets

  MISUMI

  [Features]·The fluids used are air and water. ·Nut and sleeve integrated socket fitting for tubes.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 5.90-
  Days to Ship:	12 Day(s) or more

• 

  Couplings for Tubes - Nut and Sleeve Integrated Type - Half Unions

  MISUMI

  [Features]·The fluids used are air and water. ·Nut and sleeve integrated half union type fitting for tubes.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 13.81-
  Days to Ship:	4 Day(s) or more

• • On Sale Till 31/03/2025

  

  Brass Tightening Coupler Elbow for Sputter Resistance

  PISCO

  Special brass is used for metal body to greatly improve corrosion resistance to water.
  
  [Features]
  · Special brass is used for metal body.
  · Corrosion resistance to water has been greatly increased.
  · Ideal for use in the automobile industry and for mold temperature control.
  · Never worry about forgetting or losing the sleeve again with this no-sleeve design.
  · A wide variety is available to support a wide range of applications.
  · 5 shapes: Types C, CF, MF, L and E. Adjustable tube: 10 types are available from φ4 to φ16mm.

  CAD ：

  2D

  Standard Price:	SGD 6.23-
  	Special Price
  Days to Ship:	4 Day(s) or more

• 

  Brass Tightening Fitting for Sputter Resistance Female Straight

  PISCO

  A special brass is used for the metal body. Resistance to water corrosion is greatly improved. *The CAD data for this Series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Special brass is used for the metal body.
  · The resistance to water corrosion is greatly improved.
  · Optimally suited to the automobile industry and adjusting mold temperatures.
  · A sleeve-less design. Therefore, forgetting to attach or losing sleeves will never happen again. Suitable for a wide range of various applications.

  CAD ：

  2D

  Standard Price:	SGD 3.93-
  Days to Ship:	9 Day(s) or more

• 

  for Sputtering Resistant, Brass Tightening Fitting, Female Bulkhead Straight

  PISCO

  Special brass is used for the metal body. Corrosion resistance to water is greatly improved. *The CAD data for this series is being revised. It will be available as soon as modifications are complete.

  CAD ：

  2D

  Standard Price:	SGD 4.73-
  Days to Ship:	9 Day(s) or more

• 

  Corrosion Resistant SUS316 Tighten Fitting Tee

  PISCO

  All parts are made using SUS316 for excellent corrosion resistance. *The CAD data for this series is being revised. It will be available as soon as modifications are complete.

  CAD ：

  2D

  Standard Price:	SGD 38.42-
  Days to Ship:	4 Day(s) or more

• 

  Corrosion Resistant SUS316 Tighten Fitting Branch Tee

  PISCO

  All parts made of SUS316 for excellent corrosion resistance. * The CAD data for this series is being revised. This will be available as soon as modifications are complete.

  CAD ：

  2D

  Standard Price:	SGD 38.36-
  Days to Ship:	4 Day(s) or more

• 

  Corrosion Resistant SUS316 Tighten Fitting, Bulkhead Straight

  PISCO

  All parts made of SUS316 for excellent corrosion resistance. * The CAD data for this series is being revised. This will be available as soon as modifications are complete.

  CAD ：

  2D

  Standard Price:	SGD 23.42-
  Days to Ship:	4 Day(s) or more

• 

  Hose Fitting, Universal Socket

  CHIYODA

  A cap-nut universal socket with high pull-out strength.

  CAD ：

  2D

  Standard Price:	SGD 6.90-
  Days to Ship:	4 Day(s) or more

• 

  Hose Fitting, Universal Nipple

  CHIYODA

  A cap-nut universal nipple with high pull-out strength.

  CAD ：

  2D

  Standard Price:	SGD 6.85-
  Days to Ship:	4 Day(s) or more

• 

  Junlon Brass Fitting, Service Tee

  JUNKOSHA

  Conforms to Japanese Industrial Standards JIS B8381 "Pneumatic Fittings." Allows for reliable connections because the mechanism clamps onto the tube insert with the sleeve and the cap nut. With collar thread seal for each R (PT) thread size.

  CAD ：

  2D

  Standard Price:	SGD 7.55-
  Days to Ship:	8 Day(s) or more

• 

  Junron Brass Fitting Bulkhead Female Union

  JUNKOSHA

  Conforms to Japanese Industrial Standards JIS B8381 "Pneumatic Fittings." Allows for reliable connections because the mechanism takes the tube insert and clamps onto it with the sleeve and the cap nut. With collar thread seal for each R (PT) thread size.

  Standard Price:	SGD 6.23-
  Days to Ship:	8 Day(s) or more

• 

  Junron Stainless Steel Fitting, Nipple

  JUNKOSHA

  [Features]
  ・ As it is made of SUS316, which has high-corrosion resistance, it can be used in a wide temperature range from low temperature to high temperature.
  ・ It is designed dedicated for fluoropolymer/nylon resin tubes, so it does not cut the tube due to over-tightening of the cap nut.
  ・ There is no abnormality in the connection part until the tube breaks
  ・ No need to control the tightening torque of the cap nut
  ・ Since SUS316 is used, it is a rust resistant fitting
  [Applications]
  ・ Piping of corrosion fluid
  ・ Hydraulic piping
  ・ Rust prevention piping

  CAD ：

  2D

  Standard Price:	SGD 26.25-
  Days to Ship:	4 Day(s) or more

• 

  Junlon Stainless Steel Fitting Tee

  JUNKOSHA

  Usable across a broad temperature range. Free of wear to tubing due to over-tightening of cap nut, etc. No abnormality in the connector unless the tube ruptures. Does not require management of cap nut tightening torque.

  CAD ：

  2D

  Standard Price:	SGD 55.97-
  Days to Ship:	8 Day(s) or more

• 

  Junron Stainless Steel Fitting Service Tee

  JUNKOSHA

  Usable across a broad temperature range. Wear on tubing due to over tightening of the cap nut, etc. is eliminated.
  
  [Features]
  · As the product consists of SUS316, which has good corrosion resistance properties, it can be used in a wide temperature range from low to high.
  · Designed specially for fluorine polymer/nylon resin tubes to ensure that the tube does not rupture due to excessive tightening of the cap nut, etc.
  · No abnormalities are allowed in the connected part unless the tube ruptures.
  · The tightening torque of the cap nut does not need to be managed.
  Fitting uses SUS316, so it is rust resistant.

  CAD ：

  2D

  Standard Price:	SGD 54.31-
  Days to Ship:	10 Day(s) or more

• 

  Junlon Stainless Steel Fitting Female Nipple

  JUNKOSHA

  Usable across a broad temperature range. No wear and tear to tubing as a result of an over tightening of cap nut, etc. No abnormality in the connected part unless the tube is ruptured. Does not require management of cap nut tightening torque.

  CAD ：

  2D

  Standard Price:	SGD 36.34-
  Days to Ship:	8 Day(s) or more

• 

  Junlon Stainless Fittings Bulkhead Female Union

  JUNKOSHA

  [Features]
  ・ As it is made of SUS316, which has high-corrosion resistance, it can be used in a wide temperature range from low temperature to high temperature.
  ・ It is designed dedicated for fluoropolymer/nylon resin tubes, so it does not cut the tube due to over-tightening of the cap nut.
  ・ There is no abnormality in the connection part until the tube breaks
  ・ No need to control the tightening torque of the cap nut
  ・ Since SUS316 is used, it is a rust resistant fitting
  [Applications]
  ・ Piping of corrosion fluid
  ・ Hydraulic piping
  ・ Rust prevention piping

  CAD ：

  2D

  Standard Price:	SGD 46.64-
  Days to Ship:	8 Day(s) or more

• 

  Junron Stainless Steel Fitting Male Bulkhead Union

  JUNKOSHA

  Usable across a broad temperature range. No wear and tear to tubing as a result of the over tightening of cap nut, etc.
  
  [Features]
  · Because the product consists of SUS316, which has high corrosion resistance properties, it can be used in a wide temperature range, at both low and high temperatures.
  · Designed especially for fluorine polymer/nylon resin tubes, so the tube does not rupture due to excessive tightening of cap nuts, etc.
  · No abnormality in the connected part unless the tube is ruptured.
  · The tightening torque of the cap nut does not need to be managed.
  Fitting uses SUS316, so it resists rust.

  CAD ：

  2D

  Standard Price:	SGD 48.07-
  Days to Ship:	8 Day(s) or more

• 

  US2 Series Nipple for Flexible Tubes Made Up of Junlon Stainless Steel

  JUNKOSHA

  [Features]
  ・ It is a stainless steel fitting for flexible tubes such as Junron U tubes and THV tubes
  ・ The cap nut with a built-in sleeve that uses a unique mechanism has eliminated the twisting of the tube during piping.
  ・ No need to control the tightening torque of the cap nut

  CAD ：

  2D

  Standard Price:	SGD 26.25-
  Days to Ship:	4 Day(s) or more

• 

  Junron Stainless Fitting US2 Series Elbow for Flexible Tubes

  JUNKOSHA

  Stainless steel fittings for flexible tubing. To resolve snaking during piping, we use cap nuts built into the sleeve that use a mechanism unique to our company. Does not require management of cap nut tightening torque.

  CAD ：

  2D

  Standard Price:	SGD 45.22-
  Days to Ship:	4 Day(s) or more

• 

  Quick Seal Series Insert Type (Brass) Service Tee (mm Size)

  NITTA

  It consists of three parts: brass fitting body of service tee (mm size), nut, and sleeve, and fitting body and insert are integrated. Also, it is excellent in negative pressure performance.

  CAD ：

  2D

  Standard Price:	SGD 11.77-
  Days to Ship:	4 Day(s) or more

• 

  Quick Seal Series Insert Type (with Brass Specifications) Swivel Nut Female Connector (mm Size)

  NITTA

  Brass specifications swivel nut female connector with fitting body (mm size), nut, and sleeve.
  
  [Features]
  · Screw-in type.
  · 3 parts: fitting body, nut and sleeve.
  · Demonstrates excellent sealing performance.
  · Fitting body and insert are integrated.
  · Also has excellent performance with negative pressure.
  · Only connectors are sealed.
  · Does not require sealing tape.
  JISB8381-1995 (flexible hose pipe fittings for pneumatic use) compliant product.

  CAD ：

  2D

  Standard Price:	SGD 10.43-
  Days to Ship:	4 Day(s) or more

• 

  Quick Seal Series Insert-Less Type Connector

  NITTA

  Consists of three parts: connector fitting unit, nut, and sleeve. The effective cross-sectional area is larger without an insert.
  
  [Features]
  · Screw-in type.
  · 3 parts: fitting unit, nut, and sleeve.
  · Guarantees a high flow rate.
  · Has no insert, giving it a wider cross-section.
  · Only the connectors are sealed, so there is no need to wrap them with sealing tape.

  CAD ：

  2D

  Standard Price:	SGD 5.89-
  Days to Ship:	4 Day(s) or more

• 

  Quick Seal Series Insert-Less Type 90° Elbow

  NITTA

  90° elbow consisting of three parts: fitting body, nut, and sleeve. The effective sectional area is larger without insert.
  
  [Features]
  · Screw-in type.
  · Three parts: fitting body, nut, and sleeve.
  · High flow rate can be maintained.
  · Only connectors are sealed.
  · Does not require sealing tape.

  CAD ：

  2D

  Standard Price:	SGD 9.79-
  Days to Ship:	4 Day(s) or more

• 

  Quick Seal Series, DK Tube Dedicated Type, Tee

  NITTA

  [Features]
  · Screw-in type.
  · 3 parts: fitting body, nut and sleeve.
  · Fittings dedicated to DK tubes.
  · Only connectors are sealed.
  · Does not require sealing tape.

  CAD ：

  2D

  Standard Price:	SGD 11.68-
  Days to Ship:	4 Day(s) or more

• 

  Quick Seal Series Nylon Coil Tube Dedicated Type Connector

  NITTA

  It consists of three parts: fitting body of connector, nut, and sleeve. Fitting dedicated to nylon coil tubes.

  CAD ：

  2D

  Standard Price:	SGD 11.00
  Days to Ship:	4 Day(s) or more

• 

  QuickSeal Series, Nylon Sleeve (Dedicated for Nylon Coil Tubes)

  NITTA

  [Features]
  ・ It is a screw-in type.
  ・ This product is consisted of 3 parts: fitting body, nut, sleeve. This is a fitting dedicated for nylon coil tubes.

  CAD ：

  2D

  Standard Price:	SGD 14.24
  Days to Ship:	6 Day(s) or more

• 

  Quick Seal Series - Exclusive Nylon Coil Tube Type - FS Swivel Nut Female Connector

  NITTA

  [Features]
  · Screw-in type.
  · 3 parts: fitting body, nut and sleeve.
  · Fitting designed for nylon coil tubes.

  CAD ：

  2D

  Standard Price:	SGD 14.24
  Days to Ship:	6 Day(s) or more

• 

  Quick-Seal Series, Insert Type (Stainless Steel Specifications) Connector (Inch Size)

  NITTA

  [Features]
  ・ It is a threaded type
  ・ 3 point type of body, nut and sleeve
  ・ Delivers strong sealing performance
  ・ Body and insert are integrated
  ・ Excellent negative pressure performance
  ・ Since it is made of SUS304, it has excellent corrosion resistance
  ・ JIS B 8381-1995 (pneumatic flexible pipe fittings) compliant product

  CAD ：

  2D

  Standard Price:	SGD 14.51-
  Days to Ship:	4 Day(s) or more

• 

  Quick Seal Series Insert Type (Brass) Service Tee (Inch Size)

  NITTA

  A 3-point brass service tee (inch sized) with integrated body, nut, and sleeve. The fitting body and insert are integrated. Provides excellent performance at negative pressures.

  CAD ：

  2D

  Standard Price:	SGD 11.55-
  Days to Ship:	4 Day(s) or more

• 

  Quick Seal Series Insert Type (Brass) Tee (Inch Size)

  NITTA

  A 3-point brass swivel tee (inch sized) with integrated body, nut, and sleeve. The fitting body and insert are integrated. Provides excellent performance at negative pressures.

  CAD ：

  2D

  Standard Price:	SGD 11.55-
  Days to Ship:	4 Day(s) or more

• 

  Quick Seal Series Insert Type (Brass) Female Connector (Inch Size)

  NITTA

  A 3-point brass female connector (inch sized) with integrated body, nut, and sleeve. The fitting body and insert are integrated. Provides excellent performance at negative pressures.

  CAD ：

  2D

  Standard Price:	SGD 6.88-
  Days to Ship:	6 Day(s) or more

• 

  Chemifit, CP Series, Service Tee【5 Pieces Per Package】

  NITTA

  · The inner surface of the service tee is smooth due to injection molding. Features excellent dust-free and pollution-free characteristics. A special polypropylene resin is used as a base material.
  
  [Features]
  · Screw-in type fitting made of polypropylene resin.
  · Lightweight.
  · Completely oil-free treated product.
  · Parts are cleaned in a clean room.
  ･ Excellent inner surface smoothness.
  · Inner surface is smooth due to injection molding.
  · Features excellent dust-free and pollution-free characteristics.
  · Special polypropylene resin is used as a material.
  · Complies with Ministry of Health, Labour and Welfare Notification 201 (2006) and Ministry of Health, Labour and Welfare Notification 370 (1956)

  CAD ：

  2D

  Standard Price:	SGD 31.54-
  Days to Ship:	6 Day(s) or more

• 

  Chemifit CP Series, Tee【5 Pieces Per Package】

  NITTA

  · The inner surface of the tee is smooth due to injection molding. Features excellent dust-free and pollution-free characteristics. A special polypropylene resin is used as a base material.
  
  [Features]
  · Screw-in type fitting made of polypropylene resin.
  · Lightweight.
  · Completely oil-free treated product.
  · Parts are cleaned in a clean room.
  ･ Excellent inner surface smoothness.
  · Inner surface is smooth due to injection molding.
  · Features excellent dust-free and pollution-free characteristics.
  · Special polypropylene resin is used as a material.
  · Complies with Ministry of Health, Labour and Welfare Notification 201 (2006) and Ministry of Health, Labour and Welfare Notification 370 (1956)

  CAD ：

  2D

  Standard Price:	SGD 31.54-
  Days to Ship:	4 Day(s) or more

• 

  Insert Fitting KF Series, Female Union KFF

  SMC

  [Applications]·Used for pipework from the male thread section of a pressure gauge, etc. [Materials]·C3604+C3771.

  CAD ：

  2D / 3D

  Days to Ship:	32 Day(s) or more

Loading...